Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 26-04-2023 | Date of corrigendum | Date | 29-04-2023 |
| 2 | 19-04-2023 | Corrigendum | Date | 26-04-2023 |
| Sl. No. | Item Description |
| 1 | (Kitchen-cum-Dining hall) |
| 2 | Earth work in excavation of foundation in hard soil including dressing and levelling the bed and depositing the soil within 50M initial lead and 1.5M initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3M in depth and as per the direction of Engineer-in-charge. |
| 3 | Supplying, filling in foundation and plinth with sand in 22.5 cm (9”) thick layers including watering and ramming with cost, conveyance, royaltiesof sand with labour and T&P required for the work etc. complete (Measurement will be taken on finished compacted section only). |
| 4 | Fillingfoundation and plinth withExcaveted Materials well watered and fammed including all coats etc complete. |
| 5 | Providing ,Supplying Drilling & injection Chemical emulsion for existing building Antitermite treatment to both side below the masonry wall existing floor point of contact of wood work by chloropyrophus 20EC emulsionemulsified chemical as per manufactures specification including drilling and plugging holes of 8mm dia at 300mm centre to centre wall to depth og 300mm with making good to the holes with CM (1:4) after including cost of all materials, Labour T&P required for the work as per IS-6313 part III 2001 to be executed as per direction of the EIC |
| 6 | Providing and laying plain cement concrete of proportion (1:3:6) in foundation and floors using 40 mm. size black hard hand broken granite stone metal and screened and washed sharp sand for mortar of approved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including cost, conveyance, royalties,es of all materials and cost of all labours, T&P etc complete as per the direction of the Engineer -in –charge. |
| 7 | R.C.C M-20 using 20mm and down graded black hard crusher broken granite chips of approved quality from approved quarry including hoisting, lowering and laying concrete in layers, watering, curing etc. complete including cost, conveyance, royalties and taxes of all materials with labour and T&P etc. required for the work .complete. |
| 8 | Column Base |
| 9 | Plinth band |
| 10 | Column & Beam |
| 11 | Lintel |
| 12 | Roof Slab |
| 13 | Chajja |
| 14 | Fin window side |
| 15 | Straightening bent up or coiled M.S. rod or HYSD steel (Fe-500/fe-415), cutting, bending, cranking, hooking, welding or jointing (if required), the M.S. rod or HYSD steel and binding, tying the grills, hoisting, lowering and placing in proper position as required for R.C.C. works including cost, conveyance andM.S. rod or HYSD steel and binding wires of 18 to 20 gauge and labour with all T&P required for the work etc. complete in all floors(weight of binding wire will not be considered for payment and payment will bhe made on weight of M.S. Road or HYSDD steel only. Steel bar of only manufactureing companies such as S.A.I.L. of Fe- 415/Fe-500 grade are to be used in the work & if required original bill of S.A.I.L. steel has to be produced by the Contractor) |
| 16 | 25mm (1”) av. thick grading concrete (1:2:2) on roof slab with using 4.75mm size black hard crusher broken granite chips over roof slab after chipping and chiseling the same and cleaning the surface by brushing laid to proper slope finished smooth to receive tarfelt treatment watering and curing including cost, conveyance, royalties and all materials with all labour and T&P etc. required for the workcomplete in all respect in all floors. |
| 17 | Fly Ash brick masonry in cement mortar (1:6) in Foundation and plinth using fly ash bricks of25cm x 12cm x 8cm size having a crushing strength of not less than 75 kg/cm2 with dimensional tolerance ± 8% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing including cost, conveyance, royalties and taxes of all materials with all labour, cess and T&P required for the work complete in all respect. |
| 18 | Fly Ash brick masonry in cement mortar (1:6) in superstructure using fly ash bricks of23cm x 11cm x 8cm size having a crushing strength of not less than 75 kg/cm2 with dimensional tolerance ± 8% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing including cost, conveyance, royaltiesof all materials with all labour, cess and T&P required for the work complete in all respect in all floors. |
| 19 | 16mm (5/8”) thick cement plaster (1:6) finished smooth to inside roughsurface of9”/10” thick brick walls after raking out the joints including watering and curing with cost with cost, conveyance, royaltiesof all materials with all labour, T&P required for the work etc. complete. |
| 20 | 12mm (½”) thick cement plaster (1:6) finished smooth to outside smooth surface of brick walls after raking out the joint including watering and curing with cost, conveyance, royaltiesof all materials with all labour and T&P required for the work etc. complete in all respect. |
| 21 | 6 mm (1/4\") thick cement plaster (1:4) to RCC surfaces finished smooth including closed deep chipping and slury treatment for ceiling including watering and curing complete with cost, conveyance, royalties and taxes of all materials with all labour and T&P required for the work etc. complete. |
| 22 | Finishing wall surface of walls with cement based wall putty (water based) of approved make and finished smooth and even surface to receive painting including cost of scaffodling staging charges with cost of all materials, labour, T&P etc. complete. |
| 23 | Distempering two coats with brush to the wall surface with approved shade over a coat of primer make and qualityof distemper including cost, Conveyance, royalty and all materials with cost of all labour with T&P required for the work etc. complete in all respect. |
| 24 | Painting two coats with any approved synthetic enamel paint of approved quality shade and make over a coat of priming to new wood work / iron work including cost of the primer and paint, sand papering polishing the surface with cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect. |
| 25 | Painting two coats with any approved weather seal coat (I.S.I.) paint of approved quality shade and make over a coat of priming with water bound wall cement primer (I.S.I.) to wall surface including cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect. |
| 26 | Fixing Kota stone of having dimensional area above 0.10 sqm of 16mm to 25mm as directed by Engineer-in-charge in floors, treads of steps and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties - of all materials complete in all respects. |
| 27 | Fixing kota stone using kota tile of minimum 16mm thick and dimensional area 0.10 sqm as directed by Engineer-in-charge in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties - of all materials complete in all respects. |
| 28 | Supplying, fitting and fixing chequiredtiles of approved dimension as directed by Engineer-in-charge in floors, treads of steps and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties - of all materials complete in all respects. |
| 29 | Provding Fixing of fixed Aluminium ventilator of approved make to be favbricated from roll formed section made of pre painted steel fixed to the concrete/ massonry/ walls by means of self expending screw and glass to be used of 5mm reflective woth all taxes complete....etc.. |
| 30 | Fitting & fixing & fixing M.S. Angle iron door, windows & grill as per approved design & drwaing including all cost of materials and labour etc complete as per direction of E-I-C. |
| 31 | Plinth Protection & Drain |
| 32 | Earth work in excavation of foundation in hard soil including dressing and levelling the bed and depositing the soil within 50M initial lead and 1.5M initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3M in depth and as per the direction of Engineer-in-charge. |
| 33 | Supplying, filling in foundation and plinth with sand in 22.5 cm (9”) thick layers including watering and ramming with cost, conveyance, royaltiesof sand with labour and T&P required for the work etc. complete (Measurement will be taken on finished compacted section only). |
| 34 | Providing and laying plain cement concrete of proportion (1:3:6) in foundation and floors using 40 mm. size black hard hand broken granite stone metal and screened and washed sharp sand for mortar of approved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including cost, conveyance, royalties,es of all materials and cost of all labours, T&P etc complete as per the direction of the Engineer -in –charge. |
| 35 | Cement concrete (1:2:4) using 10mm size black hard crusher broken granite chips of approved quality from approved quarry including hoisting, lowering and laying concrete in layers, watering, curing etc. complete including cost, conveyance, royalties and taxes of all materials with labour and T&P etc. required for the workcomplete. |
| 36 | Fly Ash brick masonry in cement mortar (1:6) in Foundation and plinth using fly ash bricks of23cm x 11cm x 8cm size having a crushing strength of not less than 75 kg/cm2 with dimensional tolerance ± 8% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing including cost, conveyance, royalties and taxes of all materials with all labour, cess and T&P required for the work complete in all respect. |
| 37 | 12mm (½”) thick cement plaster (1:6) finished smooth to outside smooth surface of brick walls after raking out the joint including watering and curing with cost, conveyance, royaltiesof all materials with all labour and T&P required for the work etc. complete in all respect. |
| 38 | Security Cabin & Waiting Lounge |
| 39 | Earth work in excavation of foundation in hard soil including dressing and levelling the bed and depositing the soil within 50M initial lead and 1.5M initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3M in depth and as per the direction of Engineer-in-charge. |
| 40 | Supplying, filling in foundation and plinth with sand in 22.5 cm (9”) thick layers including watering and ramming with cost, conveyance, royaltiesof sand with labour and T&P required for the work etc. complete (Measurement will be taken on finished compacted section only). |
| 41 | Fillingfoundation and plinth withExcaveted Materials well watered and fammed including all coats etc complete. |
| 42 | Providing and laying plain cement concrete of proportion (1:3:6) in foundation and plinth using 40 mm. size black hard hand broken granite stone metal and screened and washed sharp sand for mortar of approved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including cost, conveyance, royalties,es of all materials and cost of all labours, T&P etc complete as per the direction of the Engineer -in –charge. |
| 43 | R.C.C M-20 using 20mm and down graded black hard crusher broken granite chips of approved quality from approved quarry including hoisting, lowering and laying concrete in layers, watering, curing etc. complete including cost, conveyance, royalties and taxes of all materials with labour and T&P etc. required for the work .complete. |
| 44 | Plinth band/Grade Beam |
| 45 | Chajja |
| 46 | Lintel Band |
| 47 | Roof Slab |
| 48 | Straightening bent up or coiled M.S. rod or uncoated HYSD steel (Fe-500/fe-415), cutting, bending, cranking, hooking, welding or jointing (if required), the M.S. rod or HYSD steel and binding, tying the grills, hoisting, lowering and placing in proper position as required for R.C.C. works including cost, conveyance andM.S. rod or HYSD steel and binding wires of 18 to 20 gauge and labour with all T&P required for the work etc. complete in all floors(payment will be made on weight of M. S. Rods or Tor Steel only and no separate payment will be made towards the weight of binding wires). etc. complete as per specification & direction of Engineer-in-charge. |
| 49 | 25mm (1”) av. thick grading concrete (1:2:2) on roof slab with using 4.75mm size black hard crusher broken granite chips over roof slab after chipping and chiseling the same and cleaning the surface by brushing laid to proper slope finished smooth to receive tarfelt treatment watering and curing including cost, conveyance, royalties and all materials with all labour and T&P etc. required for the workcomplete in all respect in all floors. |
| 50 | Fly Ash brick masonry in cement mortar (1:6) in Foundation and plinth using fly ash bricks of23cm x 11cm x 8cm size having a crushing strength of not less than 75 kg/cm2 with dimensional tolerance ± 8% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing including cost, conveyance, royalties and taxes of all materials with all labour, cess and T&P required for the work complete in all respect. |
| 51 | Fly Ash brick masonry in cement mortar (1:6) in superstructure using fly ash bricks of23cm x 11cm x 8cm size having a crushing strength of not less than 75 kg/cm2 with dimensional tolerance ± 8% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing including cost, conveyance, royaltiesof all materials with all labour, cess and T&P required for the work complete in all respect in all floors. |
| 52 | 12mm (½”) thick cement plaster (1:6) finished smooth to outside smooth surface of brick walls after raking out the joint including watering and curing with cost, conveyance, royaltiesof all materials with all labour and T&P required for the work etc. complete in all respect. |
| 53 | 16mm (5/8”) thick cement plaster (1:6) finished smooth to inside roughsurface of9”/10” thick brick walls after raking out the joints including watering and curing with cost with cost, conveyance, royaltiesof all materials with all labour, T&P required for the work etc. complete. |
| 54 | 6 mm (1/4\") thick cement plaster (1:4) to RCC surfaces finished smooth including closed deep chipping and slury treatment for ceiling including watering and curing complete with cost, conveyance, royalties and taxes of all materials with all labour and T&P required for the work etc. complete. |
| 55 | Finishing wall surface of walls with cement based wall putty (water based) of approved make and finished smooth and even surface to receive painting including cost of scaffodling staging charges with cost of all materials, labour, T&P etc. complete. |
| 56 | Distempering two coats with brush to the wall surface with approved shade over a coat of primer make and qualityof distemper including cost, Conveyance, royalty and all materials with cost of all labour with T&P required for the work etc. complete in all respect. |
| 57 | Fitting & fixing & fixing M.S. Angle iron door, windows & grill as per approved design & drwaing including all cost of materials and labour etc complete as per direction of E-I-C. |
| 58 | Painting two coats with any approved synthetic enamel paint of approved quality shade and make over a coat of priming to new wood work / iron work including cost of the primer and paint, sand papering polishing the surface with cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect. |
| 59 | Painting two coats with any approved weather seal coat (I.S.I.) paint of approved quality shade and make over a coat of priming with water bound wall cement primer (I.S.I.) to wall surface including cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect. |
| 60 | Fixing Kota stone of having dimensional area above 0.10 sqm of 16mm to 25mm as directed by Engineer-in-charge in floors, treads of steps and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties - of all materials complete in all respects. |
| 61 | Fixing kota stone using kota tile of minimum 16mm thick and dimensional area 0.10 sqm as directed by Engineer-in-charge in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties - of all materials complete in all respects. |
| 62 | Supply and fixing of Un-plasticised Poly Vinyl Chloride (UPVC)FENESTA / NCL or equivalent Casement door -60 series duly manufactured using UPVC reinforced profiles of 60mm x 50mm x 2.5mmfor outer frames, 102mm x 60mm x 2.25mmforcasement Door sash profile and 74mm x 60mm x 2.25mmformillonprofile capable of mounting single slazing system , structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 2.0mm prefabricated & welded through fusion welding the door sash shall be fitted with 12mm thick clearWPC board of green plymake duly fixed with EPDM weathered seal resistance accessorieslike clipping lock system made up aluminium1 noper set of sashesand the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing / deglazing at site with 10 years manufactures warranty for discoloration, wraping, mechanical failures, shrinkages, rotting, corrosion etc. with a quality certificate from relevant department of Govt. of India, including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site with templates for casement sizing complete for finished item of work (confrming ASTM D638-14,EN-477-95) (structural requirements profiles are to be got approved by the Engineer-in-Charge. |
| 63 | Plinth Protection |
| 64 | Earth work in excavation of foundation in hard soil including dressing and levelling the bed and depositing the soil within 50M initial lead and 1.5M initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3M in depth and as per the direction of Engineer-in-charge. |
| 65 | Supplying, filling in foundation and plinth with sand in 22.5 cm (9”) thick layers including watering and ramming with cost, conveyance, royaltiesof sand with labour and T&P required for the work etc. complete (Measurement will be taken on finished compacted section only). |
| 66 | Filling foundation and plinth with excaveted material well watered and rammed including all cost etc complete...etc. |
| 67 | Providing and laying plain cement concrete of proportion (1:3:6) in foundation and floors using 4 cm. size black hard hand broken granite stone metal and screened and washed sharp sand for mortar of approved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including cost, conveyance, royalties of all materials and cost of all labours, T&P etc complete as per the direction of the Engineer -in –charge. |
| 68 | Fly Ash brick masonry in cement mortar (1:6) in Foundation and plinth using fly ash bricks of23cm x 11cm x 8cm size having a crushing strength of not less than 75 kg/cm2 with dimensional tolerance ± 8% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing including cost, conveyance, royalties and taxes of all materials with all labour, cess and T&P required for the work complete in all respect. |
| 69 | Cement concrete (1:2:4) using 12mm size black hard crusher broken granite chips of approved quality from approved quarry including hoisting, lowering and laying concrete in layers, watering, curing etc. complete including cost, conveyance, royalties of all materials with labour and T&P etc. required for the workcomplete. |
| 70 | 12mm (½”) thick cement plaster (1:6) finished smooth to outside smooth surface of brick walls after raking out the joint including watering and curing with cost, conveyance, royaltiesof all materials with all labour and T&P required for the work etc. complete in all respect. |
| 71 | Cycle Stand |
| 72 | Earth work in excavation of foundation in hard soil including dressing and levelling the bed and depositing the soil within 50M initial lead and 1.5M initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3M in depth and as per the direction of Engineer-in-charge. |
| 73 | Supplying, filling in foundation and plinth with sand in 22.5 cm (9”) thick layers including watering and ramming with cost, conveyance, royaltiesof sand with labour and T&P required for the work etc. complete (Measurement will be taken on finished compacted section only). |
| 74 | Providing and laying plain cement concrete of proportion (1:3:6) in foundation and floors using 40 mm. size black hard hand broken granite stone metal and screened and washed sharp sand for mortar of approved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including cost, conveyance, royalties,es of all materials and cost of all labours, T&P etc complete as per the direction of the Engineer -in –charge. |
| 75 | R.C.C.M-20 Grade in Road work using 20mm to 20mm and down size crushed stone aggregates mixed by concrete mixer, laying in layers and compacting by vibrator & all leads and lifts including frame works etc as per approved Drawing & Technical Specifications |
| 76 | Columb Base, Footing |
| 77 | Plinth Beam |
| 78 | Lintel Bend |
| 79 | Column & Beam in superstructure |
| 80 | Roof Slab |
| 81 | 25mm (1”) av. thick grading concrete (1:2:4) on roof slab with using 4.7mm size black hard crusher broken granite chips over roof slab after chipping and chiseling the same and cleaning the surface by brushing laid to proper slope finished smooth to receive tarfelt treatment watering and curing including cost, conveyance, royalties and all materials with all labour and T&P etc. required for the workcomplete in all respect in all floors. |
| 82 | Fly Ash brick masonry in cement mortar (1:6) in Foundation and plinth using fly ash bricks of23cm x 11cm x 8cm size having a crushing strength of not less than 75 kg/cm2 with dimensional tolerance ± 8% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing including cost, conveyance, royalties and taxes of all materials with all labour, cess and T&P required for the work complete in all respect. |
| 83 | Fly Ash brick masonry in cement mortar (1:6) in superstructure using fly ash bricks of23cm x 11cm x 8cm size having a crushing strength of not less than 75 kg/cm2 with dimensional tolerance ± 8% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing including cost, conveyance, royaltiesof all materials with all labour, cess and T&P required for the work complete in all respect in all floors. |
| 84 | Cement concrete (1:2:4) using 12mm size black hard crusher broken granite chips of approved quality from approved quarry including hoisting, lowering and laying concrete in layers, watering, curing etc. complete including cost, conveyance, royalties of all materials with labour and T&P etc. required for the workcomplete. |
| 85 | Straightening bent up or coiled M.S. rodHYSD steel (Fe-500/fe-415), cutting, bending, cranking, hooking, welding or jointing (if required), the M.S. rod or HYSD steel and binding, tying the grills, hoisting, lowering and placing in proper position as required for R.C.C. works including cost, conveyance andM.S. rod or HYSD steel and binding wires of 18 to 20 gauge and labour with all T&P required for the work etc. complete in all floors(payment will be made on weight of M. S. Rods or Tor Steel only and no separate payment will be made towards the weight of binding wires). etc. complete as per specification & direction of Engineer-in-charge. |
| 86 | 12mm (½”) thick cement plaster (1:6) finished smooth to outside smooth surface of brick walls after raking out the joint including watering and curing with cost, conveyance, royaltiesof all materials with all labour and T&P required for the work etc. complete in all respect. |
| 87 | 16mm (5/8”) thick cement plaster (1:6) finished smooth to inside roughsurface of9”/10” thick brick walls after raking out the joints including watering and curing with cost with cost, conveyance, royaltiesof all materials with all labour, T&P required for the work etc. complete. |
| 88 | Painting two coats with any approved weather seal coat (I.S.I.) paint of approved quality shade and make over a coat of priming with water bound wall cement primer (I.S.I.) to wall surface including cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect. |
| 89 | Distempering two coats with brush to the wall surface with approved shade over a coat of primer make and qualityof distemper including cost, Conveyance, royalty and all materials with cost of all labour with T&P required for the work etc. complete in all respect. |
| 90 | Fillingfoundation and plinth withExcaveted Materials well watered and fammed including all coats etc complete. |
| 91 | Approch Road to Kitchen |
| 92 | Earth work in excavationin hard soil in foundation and plinth including rough dressing and levelling the bed and depositing the excavated earth away fromthe work site with all leads and lifts including cost of labour and T&P required for the work and as perdirection of Engineer-in-charge. |
| 93 | Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site by mechanical means within a lead of 5 KMs spreading, grading to required slope and compacting to meet requirement of table 300-2 & clause 305 of MoRT&H Specifications for Road & Bridge works (4th Revision) including cost of royalty. |
| 94 | Loosening minimum 150mm thick, levelling Compacting original ground supprting embankment to facilitate construction of earthen embankment, sprinkling water to OMC and compacting by rolling so as to achieve minimum required, density table300-2 in embankment costruction as per technical specification CI.305.3.4 of specification for road and bridge works MORT&H (5th revision) complete as per direction of E-I-C. |
| 95 | Supplying, filling in foundation and plinth with sand in 22.5 cm (9”) thick layers including watering and ramming with cost, conveyance, royaltiesof sand with labour and T&P required for the work etc. complete (Measurement will be taken on finished compacted section only). |
| 96 | Providing and laying plain cement concrete of proportion (1:3:6) in foundation and floors using 4 cm. size black hard hand broken granite stone metal and screened and washed sharp sand for mortar of approved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including cost, conveyance, royalties of all materials and cost of all labours, T&P etc complete as per the direction of the Engineer -in –charge. |
| 97 | R.C.C M-20 using 20mm and down graded black hard crusher broken granite chips of approved quality from approved quarry including hoisting, lowering and laying concrete in layers, watering, curing etc. complete including cost, conveyance, royalties and taxes of all materials with labour and T&P etc. required for the work .complete. (In wall) |
| 98 | Fly Ash brick masonry in cement mortar (1:6) in Foundation and plinth using fly ash bricks of23cm x 11cm x 8cm size having a crushing strength of not less than 75 kg/cm2 with dimensional tolerance ± 8% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing including cost, conveyance, royalties and taxes of all materials with all labour, cess and T&P required for the work complete in all respect. |
| 99 | 12mm (½”) thick cement plaster (1:4) finished smooth to outside smooth surface of brick walls after raking out the joint including watering and curing with cost, conveyance, royaltiesof all materials with all labour and T&P required for the work etc. complete in all respect. |
| 100 | Painting two coats with any approved weather seal coat (I.S.I.) paint of approved quality shade and make over a coat of priming with water bound wall cement primer (I.S.I.) to wall surface including cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect. |
| 101 | Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M20 grade PCC on M-10 grade foundation 150 mm thick, foundation having 50mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 408. |
| 102 | Supplying and laying of precast interlocking concrete block of 80mm thick of approved design and filling the joints with sand on the prepared surface including cost of all charges etc. complete as per M.O.R.D. Specification. |
| 103 | E.I. WORKRecessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC flexible conduit with 6Amp ,250V Modular switch ISI marked and ceiling rose ISI marked mounted on Metal box having front Modular cover of suitable size, Metal box with 1.5sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection (Make of wire-Finolex/L&T/Anchor/Havells/V-Guard/Great White/HPL) |
| 104 | Group-A |
| 105 | Group-B |
| 106 | Group-C |
| 107 | Recessed wiring to 10 Amp plug point with 1.5 sqmm FR PVC insulated Single core Multi Strand Copper wire of ISI marked with 20 mm dia PVC conduit including S/F of 6AMp one way modular switch and 10 Amp 5 pin plug socket of ISI marked mounted on modular box having front modular cover of suitable size modular box with 1.5 sqmm FR PVC insulated single core multistrand copper wire as earth wire including all accessories and connections. |
| 108 | DO- on existing board |
| 109 | S/F of 20Amp Modular Plug with 20 Amp Modular Switch |
| 110 | Recessed submain wiring alongwith earth wire with the following sizes of PVC insulated single core multistrand copper conductor ISI marked conforming to IS-694/1990 in 20mm dia non metallic heavy duty flexible conduit 1.6 mm in recessed PVC conduit as required (make of wire -Finolex/L&T/Havells/V-Guard/Great White/Mescab/HPL/KEI) |
| 111 | 2 X 1.5sq.mm +1 X 1.5sqmm |
| 112 | 2 X 2.5sq.mm +1 X 1.5sqmm |
| 113 | 2 X 4sq.mm +1 X 1.5sqmm. |
| 114 | 2 X 6sq.mm +1 X 2.5sqmm. |
| 115 | Wiring to Inverter Point with 1.5 mm2 PVC Single Core Multi Strand Copper wire |
| 116 | S/F of Bakelite angle holder/batten holder of ISI marked conforming to IS-1258/1987 in place of ceiling rose . |
| 117 | Supply and fixing of Modularfan regulator(Panasonic/ Anchor/ Usha/ Bajaj) |
| 118 | Supply and fixing Standard Earthing with G.I earth pipe 3mtr. Long 40mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required |
| 119 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 120 | SPN 8 way (8+12) IP 30 (MAKE Legrand model EKINOX3 ETPN DB CATNO. 507601 or its equivalent ) |
| 121 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 122 | C Curve SP MCB 240/410V 6-32A (MAKE Legrand model DX3 MCB or its equivalent to Hager/ scheinder / Siemens ) |
| 123 | C Curve DP MCB 415V 6-32A (MAKE Legrand model DX3 MCB or its equivalent to Hager/ scheinder / Siemens ) |
| 124 | Supply and fixing ofA.C Ceiling fan 48\" size 1200mm, Speed 385 RPM 80Watt perform well at Low Voltage with summer cool effect. (Make- Crompton -Jura/ Havells- Velocity/ Usha- striker). |
| 125 | Supply and fixing of Exhaust fan 9\"/10\" size with making hole of required size. (Make-Havells/ Usha/ Almonard/ Orient/ Crompton or equivalent). |
| 126 | Supply and fixing of Wall mounted fan 16\" size. (Make-Havells/ Usha/ Almonard/ Orient/ Crompton/ Polycab or equivalent). |
| 127 | Supply and fixing of 12Watt emergency LED Ball lamp with 4hrs approx backup.(Make-Bajaj/ Philips /Crompton/ Havells/ Wipro/ Halonix/ Panasonic) |
| 128 | Supply & Fixing of 18Watt 1\"X1\"Surface fitting(Make-Bajaj/ Philips /Crompton/ Havells/ Wipro/ Halonix/ Panasonic) |
| 129 | S/F of 20W New E-lite LED curve with wide angle profile.High lumen batten with efficacy of 100 lumens( Make - HAVELL MODEL E-LITE LED Curve Catno.LHEXBXPNIN1W020 or its equivalent to Crompton/ philips) |
| 130 | Supply & Fixing of 45Watt LED street light (Make-Bajaj/ Philips /Crompton/ Havells/ Wipro/ Halonix/ Panasonic) |
| 131 | Supply & Laying of 6mmsq Service Wire |
| 132 | WIRING FOR LIGHT POINT/ FAN POINT/ EXHAUST FAN POINT/ CALL BELL POINT WITH 1.5SQMM FR COPPER CONDUCTOR SINGLE CORE CABLE IN SURFACE/ RECESSED MEDIUM CLASS PVC CONDUIT WITH PIANO TYPE SWITCH , PHENOLIC LAMINATED SHEET , SUITABLE SIZE M.S BOX AND EARTHING THE POINT WITH 1.5 SQMM FR PVC INSULATED COPPER CONDUCTOR SINGLE CORE CABLE ETC. AS REQUIRED. (MAKE- HAVELLS /HPL/ V-GUARD/ FINOLEX/ ANCHOR) |
| 133 | GROUP A |
| 134 | GROUP B |
| 135 | GROUP C |
| 136 | Recessedwiring to 5A /6Amp socket outlet with 2 X 1.5sq.mm FR PVCinsulated single core multistrand copper conductor of ISI marked in recess 20mm dia non metallic PVC flexible conduit with piano type switch, Phenolic laminated sheet suitable size ISI marked MS box and earthing point with 1 X 1.5sq.mm FR PVC insulated single core multistrand copper conductor forloop earthing etc. as required (Make of wire -Finolex/ L&T/ Anchor/ Havells/V-Guard/Great White/HPL) Separate |
| 137 | Separate |
| 138 | Supply and fixing of 5Amp plugwith switch on existing board (Piano type)1.25.1+1.25.2 |
| 139 | Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required.(power points ) |
| 140 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. (MAKE- HAVELLS /HPL /V-GUARD/ FINOLEX/ ANCHOR) |
| 141 | 2 X 1.5sq. mm + 1 X1.5sq. mm |
| 142 | 2 X 2.5sq. mm + 1 X1.5sq. mm |
| 143 | 2 x 4.0 sq.mm + 1 x 1.5 sq.mm |
| 144 | 2 X 6sq.mm +1 X 2.5sqmm. |
| 145 | INVERTER WIRING with 1.5sqmm PVC S/C multistrand Copper wire |
| 146 | S/F of Bakelite angle holder/batten holder of ISI marked conforming to IS-1258/1987 in place of ceiling rose . |
| 147 | Supplying and fixing of stepped type electronic fan regulator on the existing switch box including connections but excluding laminated sheet etc. asrequired. |
| 148 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 149 | SPN 4 way IP 30 Metal Door(MAKE Legrand model EKINOX3 ETPN DB CATNO. 507610 or its equivalent ) |
| 150 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 151 | C Curve SP MCB 240/410V 6-32A (MAKE Legrand model DX3 MCB or its equivalent to Hager/ scheinder / Siemens ) |
| 152 | Supply and fixing ofA.C Ceiling fan 48\" size. (Make-Polycab -Vital / Crompton -Jura/ Havells-Velocity/ Usha-striker/Orient-new breezee/Summer Cool , Polar -Model Win-R etc). |
| 153 | Supply and fixing of Exhaust fan 9\"/10\" size with making hole of required size. (Make-Havells/ Usha/ Almonard/ Orient/ Crompton/ Usha or equivalent). |
| 154 | Supply and fixing of 15 W LED bulb (Make-Bajaj/ Philips / Crompton/ Havells/ Wipro/ Halonix/ Panasonic) |
| 155 | Supply & Fixing of 45Watt LED street light (Make-Bajaj/ Philips /Crompton/ Havells/ Wipro/ Halonix/ Panasonic) |
| 156 | Supply & Laying of 6mmsq Service Wire |
| 157 | P.H. WORKSupplying all materials , labour, T&P and providing and fixing to wall or ceiling and floor CPVC pipes conforming to IS: 15778 and G.I pipe fittings of the following nominal bore with clamps including making good the wall,ceiling and floor ,testing all complete as per P.H. specification and direction of Engineer-in-charge |
| 158 | 25mm dia PVC ASTM pipe (sch-80) |
| 159 | 32mm dia PVC ASTM pipe (sch-80) |
| 160 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materialsincluding cost & conveyance of all materials to worksite, payment oftaxes etc. allcomplete as per P.H specification and direction of the Engineer-in-charge. |
| 161 | 15mm dia CP angle stop cock (Jaquar Make) |
| 162 | 15mm dia CPbib cock (Jaquar Make) |
| 163 | 25mm dia brassfull way valve (Shakti make) |
| 164 | 32mm dia brassfull way valve (Shakti make) |
| 165 | 15mm CP Extension piece |
| 166 | 125mm CP grating |
| 167 | 15mm size C.P. flange |
| 168 | Supplying all materials , labour, T&P and fixing rotational mouldedpolyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr widthKBbrickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxesetc.all complete as per approved drawing , P.H. specification and direction ofEngineer-in-charge |
| 169 | 2000 liters capacityPVC water storage tank |
| 170 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer\"s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment oftaxes etc.all complete as per P.H specification and direction of the Engineer-in-charge. |
| 171 | 110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B) |
| 172 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered \"Hot\" and \"Cold\" with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment oftaxes etc. all complete as perP.H specification and direction of the Engineer-in-charge |
| 173 | Counter Top Basin (560x455) (Perryware/Hindwire/Nycer Make) |
| 174 | Supplying all materials, labour, T&P for fitting & fixing plain edge kitchen/wall sink of all standard sizes with a pair of bracket, C.P. waste, trap & P.V.C. waste pipe & painting brackets including supply of cement concrete & mortar etc. all complete. 24” x 18” x 10” sink |
| 175 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge |
| 176 | Towel ring |
| 177 | Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge. |
| 178 | 600mmx125mm plate glass shelf with CP/NP guard rails. |
| 179 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge. |
| 180 | 600mmx450mm size B.E mirror (swivelled type) |
| 181 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge |
| 182 | CP soap holder |
| 183 | Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,paymentof royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. |
| 184 | Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirtingon 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tilesincludingwatering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size 25cmx33cm special plain / printed series to be pre-approved by the Engineer-in-charge ) |
| 185 | Glazed tile 30cmx20cm |
| 186 | Granite |
| 187 | Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) pure chill 80 PSS UV of size 750 x 570 x 1350mm hight with water storage capacity 120 liter\"s along withnoa of faucets 2 for cold water and 1 for normal water including a flow of 1.5 ltr per munite etc all complete as per approved drawing , specification and direction of the Engineer in charge |
| 188 | Aqua guard pure Chill 80 PSS UV |
| 189 | Supplying all materials labour T&P and constructing 1.40m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site. |
| 190 | Supplying all materials , labour, T&P and providing and fixing to wall or ceiling and floor CPVC pipes conforming to IS: 15778 and G.I pipe fittings of the following nominal bore with clamps including making good the wall,ceiling and floor ,testing all complete as per P.H. specification and direction of Engineer-in-charge |
| 191 | 25mm dia PVC ASTM pipe (sch-80) |
| 192 | 32mm dia PVC ASTM pipe (sch-80) |
| 193 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materialsincluding cost & conveyance of all materials to worksite, payment oftaxes etc. allcomplete as per P.H specification and direction of the Engineer-in-charge. |
| 194 | 15mm dia CP angle stop cock (Jaquar Make) |
| 195 | 15mm dia CPbib cock (Jaquar Make) |
| 196 | 25mm dia brassfull way valve (Shakti make) |
| 197 | 32mm dia brassfull way valve (Shakti make) |
| 198 | Supplying all materials , labour, T&P and fixing rotational mouldedpolyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr widthKBbrickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxesetc.all complete as per approved drawing , P.H. specification and direction ofEngineer-in-charge |
| 199 | 1000 liters capacityPVC water storage tank |
| 200 | supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite,payment of royality, taxes etc. all complete as perdirection ofEngineer-in-charge. |
| 201 | Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proofas per P.H. specification and direction of Engineer-in-charge |
| 202 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damagesincluding watering ,curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge. |
| 203 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer\"s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment oftaxes etc.all complete as per P.H specification and direction of the Engineer-in-charge. |
| 204 | 110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B) |
| 205 | 110mm U-PVC‘P’ Trap(Ori Plast/Finolex/Supreme Make) |
| 206 | 110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make) |
| 207 | 110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make) |
| 208 | 110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make) |
| 209 | 110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make) |
| 210 | 110mm U-PVC S/Jn door(Ori Plast/Finolex/Supreme Make) |
| 211 | 110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make) |
| 212 | 110mm U-PVC D/Jn door(Ori Plast/Finolex/Supreme Make) |
| 213 | 110mm U-PVC Plain shoe bend(Ori Plast/Finolex/Supreme Make) |
| 214 | 110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make) |
| 215 | Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI \"p\" or \"s\" trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. |
| 216 | 580mm size Orissa pan (Hindware/Parryware/Neycer make) |
| 217 | Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment oftaxes etc. all complete as perP.H specification and direction of the Engineer-in-charge |
| 218 | 10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make ) |
| 219 | Supplying all materials,labour,T&P and fixing Flat back lipped wall (Mini stall urinal -630mmx180mm) urinal of the following sizes including connecting the urinal with 32mm. dia pvc waste pipe 910mm. long by means of white lead mixed with chopped hemp, fixing 32mm. dia CP dome waste, 15mm. dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc. all complete as per specification and direction of the Engineer in charge Half stall urinal |
| 220 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered \"Hot\" and \"Cold\" with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment oftaxes etc. all complete as perP.H specification and direction of the Engineer-in-charge |
| 221 | 550mmx400mm W.H.basin (Hindware/Parryware/Neycer make)with 15mm dia C.P.pillar cock (Plaza make) with |
| 222 | Supplying all materials labour T&P filling sand in lavatories well watered and rammed including lead of materials to work site. |
| 223 | Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge |
| 224 | Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge |
| 225 | Supplying all materials, labour, T&P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tilesincludingwatering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size 40cmx40cm special printed seriesto be pre-approved by the Engineer-in-charge ) |
| 226 | Ceramic tile 30cmx30cm |
| 227 | Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,paymentof royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. |
| 228 | Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirtingon 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tilesincludingwatering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size 25cmx33cm special plain / printed series to be pre-approved by the Engineer-in-charge ) |
| 229 | Glazed tile 30cmx20cm |
| 230 | Providing fitting, fixing of Aluminium door with anodized AL. door section of 9202 as vertical member,9201 as top and 9200 as middle bottom member with frame section No. 9221 and tapered clip no. 4660 and the frame to be completed by means of jointing angle No. 1855 Including all Cost of Labour. T&P hire charges of drilling machine. labour charges etc. complete. Ref : OBI10 |
| 231 | Ext. S/D Portion |
| 232 | Supplying all materials labour T&P and constructing 1.40m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
