|
| 1 | Schedule \"A\" Section - I |
| 2 | M&L for Providing and fixing 10-12mm dia , non ferrous metallic nozzles on the surface of cracks with epoxy putty/cement grout. Cuttingthe nozzles and sealing the surface after epoxy/cement grouting complete all as specified . [ grouting of epoxy/cement grout to be paid separately complete all as specified. |
| 3 | M&L Providing and injecting low viscosity epoxy grout with grouting pump including of thinner and all accessories complete to the satisfaction of the engineer in charge . |
| 4 | M&L Cleaning the surface of all the loosely adhering particles, dust etc, manually/ mechanically as required, as per the site conditions with suitable means and repairing any spalled area with epoxy putty/ high strength polymer ready mix mortar where ever required as per the directions of engineer in charge (ready mix mortar to be measured seperately). |
| 5 | M&L forapplying two coats of food grade, water based, solvent free epoxy coating suitable for water reservoirs. The coating shall be done as per the manufacturers specifications @ 0.2kg/sqm /coat complete in all respects to the satisfaction of the Engineer-in-Charge. |
| 6 | Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified. |
| 7 | Supply and fixfor mild steel work as inFramed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanksand similar work conforming to Fe 290, Gde-E-165complete all as specified and directed. |
| 8 | Supply and fixfor mild steel work as inFramed work for portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc.conforming to Fe 290, Gde-E-165complete all as specified and directed. |
| 9 | Demolition of cement concrete (unreinforced) in ground floors and pavingsnot exceeding 15cm thickness (below or above ground level) and disposing off the rubbish materials where directed complete all as specified anddirected. |
| 10 | Demolition of brick work or stone masonary built in cement mortar including quions, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles and disposing off the rubbish materials where directed and complete all as specified and directed. |
| 11 | Material and labour for cement concrete type D-2, 1:4:8( using 40mm graded stone aggregate) in filling foundations and mass concrete complete all as specified. |
| 12 | M & L for walling of random rubble stone masonry, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and as directed by the Engineer-in-Charge. |
| 13 | All as per item No 11.00 here-in-before butexcept stone. |
| 14 | M&L for raised pointing in CM (1:4) to random rubble square/polygonal rubbles uncoursed or brought upto courses on old/new surfacescomplete all as specified. |
| 15 | Material & Labour for preparation of new steel surfaces of any description over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified. |
| 16 | Amount of credit of Rs. 26190.00 for retrived old material as mentioned in Schedule \"A\" section-II of tender document in pdf form, will be deducted offline while acceptence of tender. |
