Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Repair and Renovation to Infection Ward at SDH Nilgiri for the year 2022-23 under 5T(Ama Hospital) |
| 2 | Dismantling and removing old lime cement plasterfrom brick wall including raking out joints 12 mm deep and removing the debris within 50 mtr. lead. from work site including cost of all labour ,T&P etc. complete asdirected by the Engineer-in-charge |
| 3 | Dismantling and removingOld Tile flooring including stacking of the materialsfor reuse and removing the debris within 50 meter lead including cost of all labour, T&P etc. required complete as directed by the Engineer- in- Charge. |
| 4 | Dismantling and removing mablechipps & Skirting from wallsincluding stacking of the materialsfor reuse and removing the debris within 50 meter lead including cost of all labour, T&P etc. required complete as directed by the Engineer- in- Charge. |
| 5 | 12mm(1/2\"\") thick cement Plaster (1:6) finished smooth to outside smooth surface of brick walls after racking out the joints including watering & curing etc. complete with cost, conveyance,royality and taxes of all materials & all labourT&Pdirected for the work etc. complete as directed by the Engineer - in - charge . |
| 6 | 6mm thick cement Plaster (1:4) to RCC surface after chipping the RCC surface and slurry trement including watering & curing etc. complete with cost, conveyance,royality and taxes of all materials & all labour royalty T&Pdirected for the work etc. complete as per directed by the Engineer-in-charge. |
| 7 | Wall painting two coats with plastic emulsion paint of approved shade on new surface to give an even shade including cost of plastic emulsion paint, labour, T&P required for the work etc. all complete as directed by the Engineer-in-charge. |
| 8 | Finishing wall surface with Acrilic wall putty ( water based ) of approved make and finished smooth and even surface to receive painting , cost, conveyance, taxes of all materials and T&P required for the work including cost of scaffolding ,staging charges etc complete as per the direction of the Engineer-in-charge |
| 9 | Providing finishing out side walls with Weather coat painting two coats any approved shade including costconveyance, taxes of all materials and T & P required for the work including cost of paintetc all complete as directed by the Engineer-in-charge. |
| 10 | Providing fitting, fixing of AL door with anodized Al door section of 9202 as vertical member, 9201 as top member and 9200 as bottam and middle member with frame section no 9221 with tappered clip No 4660 and the frame to be completed by means of jointing angle No 1855 including all cost of labour ,T&P,hire charges of drilling machine,labour charges etc complete as per the direction of the Engineer-in charge excluding cost of laminated board . |
| 11 | .Supplying ,Fitting and Fixing up window (sliding type) made up aluminum section 9778 as windows frame section No 4095 , 4096 and 9777, 3994 as shutter frame with 5mm thick black glass as panel fitted with rubber bending includinglucking arrangement including all fitting including cost of materials all taxes , labour , T&P excluding cost of glass etc complete as per the direction of Engineer-in charge. |
| 12 | SupplyingofM.S grill and gate manufactured from standard rolled steel anglewith corners of the frame duly matered and electrically welded with one coat of anticorresive red Red-Oxide Zinc Crome Primer including taxes of all materials as per the directed by the Engineer-in-charge. |
| 13 | Labour for fitting and fixingM.S Gate in position with cement concrete(1:3:6) with 12mm size chrusher broken chips including cost of all materilas, labour, T&P etc. complete.as per direction of the Engineer-in Charge. |
| 14 | Painting twocoats anyapproved shade to wood or Iron works over a coat of primingincluding sand papering polishing the surface cost, conveyance, taxes of all materials & T&P required for the work including cost of paints etc complete as per the direction of the Engineer-in-charge. |
| 15 | Supplying, fitting and fixing vitrifiedcoloured and printed tile of size 600mm x 600mm of approved make in floors,treads or steps and landing on 25mm thick bed of cement mortar 1:4 (1 cement : 4 sand) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete including cost of all materials , taxes,labour,T&P etc required for the work as directed by the Engineer-in charge |
| 16 | Earth work in excavation of foundation trenches in hard soil within 50 meter initial leadand 1.5mt. Intial lift including rough dressing and levelling the bed and depositing the soil away from work site including cost of all labour, T&P etc. complete as directed by the Engineer in Charge. |
| 17 | Supplying and filling foundation and plinth with sand well watered and rammed including cost, conveyance, royalties and taxes of all materials and cost of all labour, T&P required for the work etc. complete as directed by the Engineer-in Charge. |
| 18 | Cement concrete (1:4:8) using 4cm size hard granite metal in foundation and floors (below base course) using 4cm (1½ ‘’) size black hard granite metal of approved qualities from approved quarry including lowering laying concrete watering and curingand compacting etc. complete as required level laid in layers not exceeding (0’6’’) 15cm thick including cost, conveyance, royalties & taxes of all materials and cost of all labour T&P required for the work etc. complete in all respect as directed by the Engineer-in-charge. |
| 19 | Cement concrete (1:2:4) using 12 mm(½\") size hard crusher broken granite chips of approved quality from approved quarry including lowering lying concrete watering and curing etc. complete to required levels laid in layers including cost,conveyance,royalities and taxes of all materials and cost of all labour ,T&P required for the work etc. complete as directed by the Engineer-in-charge. |
| 20 | Supplying, fitting and fixing ceramic wall tilesof primium grade having thickness 7mm to 8 mmconforming to IS 13755 of section 30x30 cm or 40x40 cm plane or printed in floor treads or steps and landing on 25mm thick bed in cement mortar (1:4) (1 Cement : 4 Sand) jointed with neat cement slurry mixed with pigments to match the dadoes of the tiles including rubbing and polishing etc. all complete including cost of tiles and labour etc.required for the work as directed by the Engineer-in charge |
| 21 | Scrapingclearing the old paint from plaster surface with soap and soda includingsand papering includingscrffolding charges up to 5m heightincluding cost of all materials, Taxes, Cost of all labour, etc. completeas directed by the Engineer-in-charge |
| 22 | Repair and Renovation repair of Laboratory building for the year 2022-23 under 5T(Ama Hospital) |
| 23 | 12mm(1/2\"\") thick cement Plaster (1:6) finished smooth to outside smooth surface of brick walls after racking out the joints including watering & curing etc. complete with cost, conveyance,royality and taxes of all materials & all labourT&Pdirected for the work etc. complete as directed by the Engineer - in - charge . |
| 24 | 12 mm (½\") thick cement plaster(1:4) finished smooth to outside surface of brick walls after raking out joints including watering and curing etc complete including cost , conveyance , royality and taxes of all materials , cost of all labour and T&P required for the work etc complete as directed by the Engineer - in - charge . |
| 25 | 6mm thick cement Plaster (1:4) to RCC surface after chipping the RCC surface and slurry trement including watering & curing etc. complete with cost, conveyance,royality and taxes of all materials & all labour royalty T&Pdirected for the work etc. complete as per directed by the Engineer-in-charge. |
| 26 | 4cm thick grading concrete (1:2:4)using12mm size hard broken granite chipsincluding watering and curing cost conveyance, royalties and taxes of all materials, cost of all labour T&P etc. required for the work as directed by the Engineer-in-charge |
| 27 | Fly Ashbrick masonry in cement mortar (1:6) in Superstructure usingFly Ashbrick size 25cm x 12cm x 8cm and75 kg/cm2 with dimensional tolerance8% after immersing the bricks for six hours in water before use including splays cutting circular moulding corbelling chamfering and similar such type of work as directed by the Engineer-in-charge including watering and curing cost, conveyance, royalties and taxes of all materials and cost of all labour T&P required for the work and finished item of work shall confirm to relevant I.S. specification and confirm test as per specification as directed by the Engineer-in-charge. |
| 28 | Supplying, fitting and fixing vitrifiedcoloured and printed tile of size 600mm x 600mm of approved make in floors,treads or steps and landing on 25mm thick bed of cement mortar 1:4 (1 cement : 4 sand) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete including cost of all materials , taxes,labour,T&P etc required for the work as directed by the Engineer-in charge |
| 29 | Supplying,fitting ,fixing granitetiles in floor of primium grade in floorstreads on steps and landing on 25mm thick bed of cement mortar neat cement slurry mixed with pigment to match the shade of tiles with cement Mortar (1:1) including rubbing and polishing complete including cost of granite tiles and cost of labour etc. complete as per directed by the Engineer-in-charge. |
| 30 | Fixing vitrifiedtiles in dado,skirting and rises steps 20cm x 30cm / 20cm x 20cm special plane/ printed series of premium grade havingthickness 6.5mm to 6.7 mmconforming to IS 13753 on 12mm thick bed cement morter 1:3 ( 1 cement :3 Sand) jointed with neat cement slurry mixed with pigments to match theshade of thetiles including rubbing and polishingetc. all complete including cost of tiles and labour etc.required for the work as directed by the Engineer-in charge |
| 31 | Supplying, fitting and fixing ceramic walltilesof primium grade having thickness 7mm to 8 mmconforming to IS 13755 of section 30x30 cm or 40x40 cm plane or printed in floor treads or steps and landing on 12mm thick bed in cement mortar (1:3) (1 Cement : 3 Sand) jointed with neat cement slurry mixed with pigments to match the dadoes of the tiles including rubbing and polishing etc. all complete including cost of tiles and labour etc.required for the work as directed by the Engineer-in charge |
| 32 | Supplying, fitting and fixing ceramic floortilesof primium grade having thickness 7mm to 8 mmconforming to IS 13755 of section 30x30 cm or 40x40 cm plane or printed in floor treads or steps and landing on 25mm thick bed in cement mortar (1:4) (1 Cement : 4 Sand) jointed with neat cement slurry mixed with pigments to match the dadoes of the tiles including rubbing and polishing etc. all complete including cost of tiles and labour etc.required for the work as directed by the Engineer-in charge |
| 33 | .Supplying ,Fitting and Fixing up window (sliding type) made up aluminum section 9778 as windows frame section No 4095 , 4096 and 9777, 3994 as shutter frame with 5mm thick black glass as panel fitted with rubber bending includinglucking arrangement including all fitting including cost of materials all taxes , labour , T&P excluding cost of glass etc complete as per the direction of Engineer-in charge. |
| 34 | Providing fitting, fixing of AL door with anodized Al door section of 9202 as vertical member, 9201 as top member and 9200 as bottam and middle member with frame section no 9221 with tappered clip No 4660 and the frame to be completed by means of jointing angle No 1855 including all cost of labour ,T&P,hire charges of drilling machine,labour charges etc complete as per the direction of the Engineer-in charge excluding cost of laminated board . |
| 35 | Supplying, fitting and fixing F.R.P/ PVC doorshutter in position includingmending & cutting to size with cost nails and screw,including cost of materials, cost of labour required for the work etc. complete as directed by the Engineer-in-charge. |
| 36 | SupplyingofM.S grill and gate manufactured from standard rolled steel anglewith corners of the frame duly matered and electrically welded with one coat of anticorresive red Red-Oxide Zinc Crome Primer including taxes of all materials as per the directed by the Engineer-in-charge. |
| 37 | Labour for fitting and fixingM.S Gate in position with cement concrete(1:3:6) with 12mm size chrusher broken chips including cost of all materilas, labour, T&P etc. complete.as per direction of the Engineer-in Charge |
| 38 | Providing and applying wall painting two coats with plastic emulsion paint over a coat of primerof approved shade on new surface to give an even shade including cost of plastic emulsion paint, labour, T&P required for the work etc. all complete as directed by the Engineer-in-charge. |
| 39 | Finishing wall surface with Acrilic wall putty ( water based ) of approved make and finished smooth and even surface to receive painting , cost, conveyance, taxes of all materials and T&P required for the work including cost of scaffolding ,staging charges etc complete as per the direction of the Engineer-in-charge |
| 40 | Providing Weather coat painting two coats ovar a coat of primerto out sidewall with any approved shade of including costconveyance, taxes of all materials and T & P required for the work including cost of paintetc all complete as directed by the Engineer-in-charge. |
| 41 | Painting twocoats anyapproved shade to wood or Iron works over a coat of primingincluding sand papering polishing the surface cost, conveyance, taxes of all materials & T&P required for the work including cost of paints etc complete as per the direction of the Engineer-in-charge. |
| 42 | Earth work in excavation of foundation trenches in hard soil within 50 meter initial leadand 1.5mt. Intial lift including rough dressing and levelling the bed and depositing the soil away from work site including cost of all labour, T&P etc. complete as directed by the Engineer in Charge. |
| 43 | Supplying and filling foundation and plinth with sand well watered and rammed including cost, conveyance, royalties and taxes of all materials and cost of all labour, T&P required for the work etc. complete as directed by the Engineer-in Charge. |
| 44 | Cement concrete (1:4:8) using 4cm size hard granite metal in foundation and floors (below base course) using 4cm (1½ ‘’) size black hard granite metal of approved qualities from approved quarry including lowering laying concrete watering and curingand compacting etc. complete as required level laid in layers not exceeding (0’6’’) 15cm thick including cost, conveyance, royalties & taxes of all materials and cost of all labour T&P required for the work etc. complete in all respect as directed by the Engineer-in-charge. |
| 45 | Cement concrete (1:2:4) using 12 mm(½\") size hard crusher broken granite chips of approved quality from approved quarry including lowering lying concrete watering and curing etc. complete to required levels laid in layers including cost,conveyance,royalities and taxes of all materials and cost of all labour ,T&P required for the work etc. complete as directed by the Engineer-in-charge. |
| 46 | Fly Ashbrick masonry in cement mortar (1:6) in Superstructure usingFly Ashbrick size 25cm x 12cm x 8cm and75 kg/cm2 with dimensional tolerance8% after immersing the bricks for six hours in water before use including splays cutting circular moulding corbelling chamfering and similar such type of work as directed by the Engineer-in-charge including watering and curing cost, conveyance, royalties and taxes of all materials and cost of all labour T&P required for the work and finished item of work shall confirm to relevant I.S. specification and confirm test as per specification as directed by the Engineer-in-charge. |
| 47 | Removing Old lime or cement plaster fromwalls including raking out joints 12 mm deep and removing the debris within 50 mtr. lead. from work site including cost of all labour ,T&P etc. complete asdirected by the Engineer-in-charge |
| 48 | Dismantling and removing oldtile flooring including stacking of the materialsfor reuse and removing the debris within 50 meter lead including cost of all labour, T&P etc. required complete as directed by the Engineer- in- Charge. |
| 49 | Dismantling and removing 2.5 cm grading concrete from roof slab cleaning the surface lowering & removing the debris within 50 meter lead including cost of all labour, T&P etc. required complete as directed by the Engineer- in- Charge. |
| 50 | Repair and Renovation to T.B Ward at SDH Nilgiri for 22-23 under 5T(Ama Hospital) |
| 51 | Dismantling and removing old lime cement plasterfrom brick wall including raking out joints 12 mm deep and removing the debris within 50 mtr. lead. from work site including cost of all labour ,T&P etc. complete asdirected by the Engineer-in-charge |
| 52 | Dismantling and removing 2.5 cm grading concrete from roof slab cleaning the surface lowering & removing the debris within 50 meter lead including cost of all labour, T&P etc. required complete as directed by the Engineer- in- Charge. |
| 53 | Dismantling and removing oldtile flooring including stacking of the materialsfor reuse and removing the debris within 50 meter lead including cost of all labour, T&P etc. required complete as directed by the Engineer- in- Charge. |
| 54 | 4cm thick grading concrete (1:2:4)using12mm size hard broken granite chipsincluding watering and curing cost conveyance, royalties and taxes of all materials, cost of all labour T&P etc. required for the work as directed by the Engineer-in-charge |
| 55 | 12mm(1/2\"\") thick cement Plaster (1:6) finished smooth to outside smooth surface of brick walls after racking out the joints including watering & curing etc. complete with cost, conveyance,royality and taxes of all materials & all labourT&Pdirected for the work etc. complete as directed by the Engineer - in - charge . |
| 56 | 6mm thick cement Plaster (1:4) to RCC surface after chipping the RCC surface and slurry trement including watering & curing etc. complete with cost, conveyance,royality and taxes of all materials & all labour royalty T&Pdirected for the work etc. complete as per directed by the Engineer-in-charge. |
| 57 | Supplying, fitting and fixing vitrifiedcoloured and printed tile of size 600mm x 600mm of approved make in floors,treads or steps and landing on 25mm thick bed of cement mortar 1:4 (1 cement : 4 sand) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete including cost of all materials , taxes,labour,T&P etc required for the work as directed by the Engineer-in charge |
| 58 | Fixing vitrifiedtiles in dado,skirting and rises steps 20cm x 30cm / 20cm x 20cm special plane/ printed series of premium grade havingthickness 6.5mm to 6.7 mmconforming to IS 13753 on 12mm thick bed cement morter 1:3 ( 1 cement :3 Sand) jointed with neat cement slurry mixed with pigments to match theshade of thetiles including rubbing and polishingetc. all complete including cost of tiles and labour etc.required for the work as directed by the Engineer-in charge |
| 59 | Fixing ceramic tiles in dado,skirting and rises steps 20cm x 30cm / 20cm x 20cm special plane/ printed series of premium grade havingthickness 6.5mm to 6.7 mmconforming to IS 13753 on 12mm thick bed cement morter 1:3 ( 1 cement :3 Sand) jointed with neat cement slurry mixed with pigments to match theshade of thetiles including rubbing and polishingetc. all complete including cost of tiles and labour etc.required for the work as directed by the Engineer-in charge |
| 60 | Fixing of marble tiles in floors,treads or steps and landing on 25mm thick bed of cement mortar 1:4(1 cement : 4sand) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete including cost of all materials , taxes,labour,T&P etc required for the work as directed by the Engineer-in charge |
| 61 | Wall painting two coats with plastic emulsion paint of approved shade on new surface to give an even shade including cost of plastic emulsion paint, labour, T&P required for the work etc. all complete as directed by the Engineer-in-charge. |
| 62 | Finishing wall surface with Acrilic wall putty ( water based ) of approved make and finished smooth and even surface to receive painting , cost, conveyance, taxes of all materials and T&P required for the work including cost of scaffolding ,staging charges etc complete as per the direction of the Engineer-in-charge |
| 63 | Providing Weather coat painting two coats to out sidewall with any approved shade of including costconveyance, taxes of all materials and T & P required for the work including cost of paintetc all complete as directed by the Engineer-in-charge. |
| 64 | Suppling fitting & Fixing in position well dressedwellnon sal wood work inchoukaths including two coats of coaltaring to wall side faces and fixed the same with required No. of W.I clamps with approved quality of screws including cost, conveyance,royalities & taxes of all materials,and cost of all labour T&P required for the work etc. complete as directed by the Engineer-in-Charge |
| 65 | Providing fitting, fixing of AL door with anodized Al door section of 9202 as vertical member, 9201 as top member and 9200 as bottam and middle member with frame section no 9221 with tappered clip No 4660 and the frame to be completed by means of jointing angle No 1855 including all cost of labour ,T&P,hire charges of drilling machine,labour charges etc complete as per the direction of the Engineer-in charge excluding cost of laminated board . |
| 66 | .Supplying ,Fitting and Fixing up window (sliding type) made up aluminum section 9778 as windows frame section No 4095 , 4096 and 9777, 3994 as shutter frame with 5mm thick black glass as panel fitted with rubber bending includinglucking arrangement including all fitting including cost of materials all taxes , labour , T&P excluding cost of glass etc complete as per the direction of Engineer-in charge. |
| 67 | Providing fitting and fixing up partition walling OEL aluminum anodized section No.9210 and 9207 as single groove and double groove respectively as horizontal and vertical member and OEL section 4660 as Tapered clip for fixing up 12mm thick pre laminated board (Nove pan make) and jointing angle No. 1855 etc. complete as per direction of Engineer-in-charge. |
| 68 | Supplying, fitting and fixing F.R.P/ PVC doorshutter in position includingmending & cutting to size with cost nails and screw,including cost of materials, cost of labour required for the work etc. complete as directed by the Engineer-in-charge. |
| 69 | SupplyingofM.Sdoor and windowgrill manufactured from standard rolled steel angle with corners of the frame duly matered and electrically welded with one coat of anticorresive red Red-Oxide Zinc Crome Primer including taxes of all materials as per the directed by the Engineer-in-charge. |
| 70 | Labour for fitting and fixingM.S Gate /Grill in position with cement concrete(1:3:6) with 12mm size chrusher broken chips including cost of all materilas, labour, T&P etc. complete.as per direction of the Engineer-in Charge. |
| 71 | Painting twocoats anyapproved shade to wood or Iron works over a coat of primingincluding sand papering polishing the surface cost, conveyance, taxes of all materials & T&P required for the work including cost of paints etc complete as per the direction of the Engineer-in-charge. |
| 72 | Earth work in excavation of foundation trenches in hard soil within 50 meter initial leadand 1.5mt. Intial lift including rough dressing and levelling the bed and depositing the soil away from work site including cost of all labour, T&P etc. complete as directed by the Engineer in Charge. |
| 73 | Supplying and filling foundation and plinth with sand well watered and rammed including cost, conveyance, royalties and taxes of all materials and cost of all labour, T&P required for the work etc. complete as directed by the Engineer-in Charge. |
| 74 | Cement concrete (1:4:8) using 4cm size hard granite metal in foundation and floors (below base course) using 4cm (1½ ‘’) size black hard granite metal of approved qualities from approved quarry including lowering laying concrete watering and curingand compacting etc. complete as required level laid in layers not exceeding (0’6’’) 15cm thick including cost, conveyance, royalties & taxes of all materials and cost of all labour T&P required for the work etc. complete in all respect as directed by the Engineer-in-charge. |
| 75 | Cement concrete (1:2:4) using 12 mm(½\") size hard crusher broken granite chips of approved quality from approved quarry including lowering lying concrete watering and curing etc. complete to required levels laid in layers including cost,conveyance,royalities and taxes of all materials and cost of all labour ,T&P required for the work etc. complete as directed by the Engineer-in-charge. |
| 76 | Fly Ashbrick masonry in cement mortar (1:6) in Superstructure usingFly Ashbrick size 25cm x 12cm x 8cm and75 kg/cm2 with dimensional tolerance8% after immersing the bricks for six hours in water before use including splays cutting circular moulding corbelling chamfering and similar such type of work as directed by the Engineer-in-charge including watering and curing cost, conveyance, royalties and taxes of all materials and cost of all labour T&P required for the work and finished item of work shall confirm to relevant I.S. specification and confirm test as per specification as directed by the Engineer-in-charge. |
| 77 | Scrapingclearing the old paint from plaster surface with soap and soda includingsand papering includingscrffolding charges up to 5m heightincluding cost of all materials, Taxes, Cost of all labour, etc. completeas directed by the Engineer-in-charge |
| 78 | Repair and Renovation to Existing Toilet at SDH Nilgiri for the year 2022-23 under 5T(Ama Hospital) |
| 79 | Earth work in excavation of foundation trenches in hard soil within 50 meter initial leadand 1.5mt. Intial lift including rough dressing and levelling the bed and depositing the soil away from work site including cost of all labour, T&P etc. complete as directed by the Engineer in Charge. |
| 80 | Supplying and filling foundation and plinth with sand well watered and rammed including cost, conveyance, royalties and taxes of all materials and cost of all labour, T&P required for the work etc. complete as directed by the Engineer-in Charge. |
| 81 | ProvidingPlain Cement concrete (1:3:6) using 40mm size clean hard granite crusher metal of approved quality from approved quarry including hoisting, lowering, laying concrete in layer not exceeding 15cm thick and compacting to the required thicknessand curing etc. complete includingcost, conveyance royalty and taxes of all materials and cost of labour ,T&P and other charges of machineries etc. required for the work as per specification & direction of the Engineer-in-charge. |
| 82 | Plain Cement concrete (1:2:4) using 12 mm(½\") size hard crusher broken granite chips of approved quality from approved quarry including lowering lying concrete watering and curing etc. complete to required levels laid in layers including cost,conveyance,royalities and taxes of all materials and cost of all labour ,T&P required for the work etc. complete as directed by the Engineer-in-charge. |
| 83 | R.C.C. work M-20grade with20mmand down grade C.Bchips having a minimum compressive strength (in work test) 200 kg/cm2 in 15cm cubes at 20 daysafter mixing and test conduct in accordance with I..S 456 and I.S 516 including hoisting lowring laying concrete andcompacting with vibrators, curing for 28 days with smoothcentering and shuttering and finishing the exposed surface smooth providing grooves or beads where necessary including cost, conveyance, royalties& T&Prequired for the work complete in all respect but excluding cost of HYSD and binding wires and labour charges for bending binding and tying the grills as per drawing, specification and direction of Engineer-in-Charge. (Column Base) |
| 84 | Column |
| 85 | Grade Beam |
| 86 | Lintel |
| 87 | Wall Beam |
| 88 | Roof Slab |
| 89 | Supplying HYSD (FE 415)/ (FE 500) of SAIL/TATA/JINDAL STEEL/SHYAM STEEL for reinforcementtying the grills and placing in position as required for the RCC works and for providing fan hooks hoisting and lowering,laying including cost,conveyance & taxes of HYSD bars and binding wires of 18 to 20 gauge required for the work and bending binding and tying the grills ( Payment will be made on weight of HYSD bars only and no separate payment will be made towords the weight of binding wires)etc. complete as per specification and direction of the Engineer - in - charge |
| 90 | Fly Ashbrick masonry in cement mortar (1:6) in foundation and plinth usingFly Ashbrick size 25cm x 12cm x 8cm and75 kg/cm2 with dimensional tolerance8% after immersing the bricks for six hours in water before use including splays cutting circular moulding corbelling chamfering and similar such type of work as directed by the Engineer-in-charge including watering and curing cost, conveyance, royalties and taxes of all materials and cost of all labour T&P required for the work and finished item of work shall confirm to relevant I.S. specification and confirm test as per specification as directed by the Engineer-in-charge. |
| 91 | Fly Ashbrick masonry in cement mortar (1:6) in Superstructure usingFly Ashbrick size 25cm x 12cm x 8cm and75 kg/cm2 with dimensional tolerance8% after immersing the bricks for six hours in water before use including splays cutting circular moulding corbelling chamfering and similar such type of work as directed by the Engineer-in-charge including watering and curing cost, conveyance, royalties and taxes of all materials and cost of all labour T&P required for the work and finished item of work shall confirm to relevant I.S. specification and confirm test as per specification as directed by the Engineer-in-charge. |
| 92 | 2.5 cm(1\") thick grading concrete (1:2:2) on roof slab with 6mm size hard broken granite chips on new work including cost, conveyance, royalties and taxes of all materials, cost of all labour T&P etc. required for the work as directed by the Engineer-in-charge |
| 93 | Supplying, fitting and fixing ceramic tilesof primium grade having thickness 7mm to 8 mmconforming to IS 13755 of section 30x30 cm or 40x40 cm plane or printed in floor treads or steps and landing on 25mm thick bed in cement mortar (1:4) (1 Cement : 4 Sand) jointed with neat cement slurry mixed with pigments to match the dadoes of the tiles including rubbing and polishing etc. all complete including cost of tiles and labour etc.required for the work as directed by the Engineer-in charge |
| 94 | Fixing ceramic tiles in dado,skirting and rises steps 20cm x 30cm / 20cm x 20cm special plane/ printed series of premium grade havingthickness 6.5mm to 6.7 mmconforming to IS 13753 on 12mm thick bed cement morter 1:3 ( 1 cement :3 Sand) jointed with neat cement slurry mixed with pigments to match theshade of thetiles including rubbing and polishingetc. all complete including cost of tiles and labour etc.required for the work as directed by the Engineer-in charge |
| 95 | 16 mm (5/8\") thick cement plasterin Cement Mortar(1:6) finished smooth to inside rough surface ofbrick walls after raking out joints scapping and cleaning the surface including watering and curing for specified period etc. complete with cost, conveyance , royality and taxes of all materials , and cost of all labourT&P directed for the work etc. complete as directed by the Engineer - in - charge . |
| 96 | 12mm(1/2\"\") thick cement Plaster (1:6) finished smooth to outside smooth surface of brick walls after racking out the joints including watering & curing etc. complete with cost, conveyance,royality and taxes of all materials & all labourT&Pdirected for the work etc. complete as directed by the Engineer - in - charge . |
| 97 | 6mm thick cement Plaster (1:4) to RCC surface after chipping the RCC surface and slurry trement including watering & curing etc. complete with cost, conveyance,royality and taxes of all materials & all labour royalty T&Pdirected for the work etc. complete as per directed by the Engineer-in-charge. |
| 98 | Supplying, fitting and fixing F.R.P/ PVC doorshutter in position includingmending & cutting to size with cost nails and screw,including cost of materials, cost of labour required for the work etc. complete as directed by the Engineer-in-charge. |
| 99 | SupplyingofM.Sdoor and window grillmanufactured from standard rolled steel angle with corners of the frame duly matered and electrically welded with one coat of anticorresive red Red-Oxide Zinc Crome Primer including taxes of all materials as per the directed by the Engineer-in-charge. |
| 100 | Labour for fitting and fixingM.S Gate/Grillin position with cement concrete(1:3:6) with 12mm size chrusher broken chips including cost of all materilas, labour, T&P etc. complete.as per direction of the Engineer-in Charge. |
| 101 | Painting twocoats anyapproved shade to wood or Iron works over a coat of primingincluding sand papering polishing the surface cost, conveyance, taxes of all materials & T&P required for the work including cost of paints etc complete as per the direction of the Engineer-in-charge. |
| 102 | Distempering two coats with any approved shade includingcost of distemper and taxes of all materilas and all labour etc. complete as per direction of the Engineer -in- Charge |
| 103 | Providing Weather coat painting two coats to out sidewall with any approved shade of including costconveyance, taxes of all materials and T & P required for the work including cost of paintetc all complete as directed by the Engineer-in-charge. |
| 104 | Construction of Community Toilet for attendant and Patient ( Both Male and Female) at SDH Nilgiri for the year 2022-23 under 5T(Ama Hospital) |
| 105 | Earth work in excavation of foundation trenches in hard soil within 50 meter initial leadand 1.5mt. Intial lift including rough dressing and levelling the bed and depositing the soil away from work site including cost of all labour, T&P etc. complete as directed by the Engineer in Charge. |
| 106 | Supplying and filling foundation and plinth with sand well watered and rammed including cost, conveyance, royalties and taxes of all materials and cost of all labour, T&P required for the work etc. complete as directed by the Engineer-in Charge. |
| 107 | ProvidingPlain Cement concrete (1:3:6) using 40mm size clean hard granite crusher metal of approved quality from approved quarry including hoisting, lowering, laying concrete in layer not exceeding 15cm thick and compacting to the required thicknessand curing etc. complete includingcost, conveyance royalty and taxes of all materials and cost of labour ,T&P and other charges of machineries etc. required for the work as per specification & direction of the Engineer-in-charge. |
| 108 | Plain Cement concrete (1:2:4) using 12 mm(½\") size hard crusher broken granite chips of approved quality from approved quarry including lowering lying concrete watering and curing etc. complete to required levels laid in layers including cost,conveyance,royalities and taxes of all materials and cost of all labour ,T&P required for the work etc. complete as directed by the Engineer-in-charge. |
| 109 | R.C.C. work M-20grade with20mmand down grade C.Bchips having a minimum compressive strength (in work test) 200 kg/cm2 in 15cm cubes at 20 daysafter mixing and test conduct in accordance with I..S 456 and I.S 516 including hoisting lowring laying concrete andcompacting with vibrators, curing for 28 days with smoothcentering and shuttering and finishing the exposed surface smooth providing grooves or beads where necessary including cost, conveyance, royalties& T&Prequired for the work complete in all respect but excluding cost of HYSD and binding wires and labour charges for bending binding and tying the grills as per drawing, specification and direction of Engineer-in-Charge. (Column Base) |
| 110 | Column |
| 111 | Grade Beam |
| 112 | Lintel |
| 113 | Wall Beam |
| 114 | Roof Slab |
| 115 | Supplying HYSD (FE 415)/ (FE 500) of SAIL/TATA/JINDAL STEEL/SHYAM STEEL for reinforcementtying the grills and placing in position as required for the RCC works and for providing fan hooks hoisting and lowering,laying including cost,conveyance & taxes of HYSD bars and binding wires of 18 to 20 gauge required for the work and bending binding and tying the grills ( Payment will be made on weight of HYSD bars only and no separate payment will be made towords the weight of binding wires)etc. complete as per specification and direction of the Engineer - in - charge |
| 116 | Fly Ashbrick masonry in cement mortar (1:6) in foundation and plinth usingFly Ashbrick size 25cm x 12cm x 8cm and75 kg/cm2 with dimensional tolerance8% after immersing the bricks for six hours in water before use including splays cutting circular moulding corbelling chamfering and similar such type of work as directed by the Engineer-in-charge including watering and curing cost, conveyance, royalties and taxes of all materials and cost of all labour T&P required for the work and finished item of work shall confirm to relevant I.S. specification and confirm test as per specification as directed by the Engineer-in-charge. |
| 117 | Fly Ashbrick masonry in cement mortar (1:6) in Superstructure usingFly Ashbrick size 25cm x 12cm x 8cm and75 kg/cm2 with dimensional tolerance8% after immersing the bricks for six hours in water before use including splays cutting circular moulding corbelling chamfering and similar such type of work as directed by the Engineer-in-charge including watering and curing cost, conveyance, royalties and taxes of all materials and cost of all labour T&P required for the work and finished item of work shall confirm to relevant I.S. specification and confirm test as per specification as directed by the Engineer-in-charge. |
| 118 | 2.5 cm(1\") thick grading concrete (1:2:2) on roof slab with 6mm size hard broken granite chips on new work including cost, conveyance, royalties and taxes of all materials, cost of all labour T&P etc. required for the work as directed by the Engineer-in-charge |
| 119 | Supplying, fitting and fixing ceramic tilesof primium grade having thickness 7mm to 8 mmconforming to IS 13755 of section 30x30 cm or 40x40 cm plane or printed in floor treads or steps and landing on 25mm thick bed in cement mortar (1:4) (1 Cement : 4 Sand) jointed with neat cement slurry mixed with pigments to match the dadoes of the tiles including rubbing and polishing etc. all complete including cost of tiles and labour etc.required for the work as directed by the Engineer-in charge |
| 120 | Fixing ceramic tiles in dado,skirting and rises steps 20cm x 30cm / 20cm x 20cm special plane/ printed series of premium grade havingthickness 6.5mm to 6.7 mmconforming to IS 13753 on 12mm thick bed cement morter 1:3 ( 1 cement :3 Sand) jointed with neat cement slurry mixed with pigments to match theshade of thetiles including rubbing and polishingetc. all complete including cost of tiles and labour etc.required for the work as directed by the Engineer-in charge |
| 121 | 16 mm (5/8\") thick cement plasterin Cement Mortar(1:6) finished smooth to inside rough surface ofbrick walls after raking out joints scapping and cleaning the surface including watering and curing for specified period etc. complete with cost, conveyance , royality and taxes of all materials , and cost of all labourT&P directed for the work etc. complete as directed by the Engineer - in - charge . |
| 122 | 12mm(1/2\"\") thick cement Plaster (1:6) finished smooth to outside smooth surface of brick walls after racking out the joints including watering & curing etc. complete with cost, conveyance,royality and taxes of all materials & all labourT&Pdirected for the work etc. complete as directed by the Engineer - in - charge . |
| 123 | 6mm thick cement Plaster (1:4) to RCC surface after chipping the RCC surface and slurry trement including watering & curing etc. complete with cost, conveyance,royality and taxes of all materials & all labour royalty T&Pdirected for the work etc. complete as per directed by the Engineer-in-charge. |
| 124 | Supplying, fitting and fixing F.R.P/ PVC doorshutter in position includingmending & cutting to size with cost nails and screw,including cost of materials, cost of labour required for the work etc. complete as directed by the Engineer-in-charge. |
| 125 | SupplyingofM.Sdoor and window grillmanufactured from standard rolled steel angle with corners of the frame duly matered and electrically welded with one coat of anticorresive red Red-Oxide Zinc Crome Primer including taxes of all materials as per the directed by the Engineer-in-charge. |
| 126 | Labour for fitting and fixingM.S Gate/Grillin position with cement concrete(1:3:6) with 12mm size chrusher broken chips including cost of all materilas, labour, T&P etc. complete.as per direction of the Engineer-in Charge. |
| 127 | Painting twocoats anyapproved shade to wood or Iron works over a coat of primingincluding sand papering polishing the surface cost, conveyance, taxes of all materials & T&P required for the work including cost of paints etc complete as per the direction of the Engineer-in-charge. |
| 128 | Distempering two coats with any approved shade includingcost of distemper and taxes of all materilas and all labour etc. complete as per direction of the Engineer -in- Charge |
| 129 | Providing Weather coat painting two coats to out sidewall with any approved shade of including costconveyance, taxes of all materials and T & P required for the work including cost of paintetc all complete as directed by the Engineer-in-charge. |
| 130 | Construction of Parking Shed at SDH Nilgiri for 2022-23 under 5T(Ama Hospital) |
| 131 | Supplying fitting and fixingsteelM.S Angle A.C sheet roof ofsize 50mm.x50mm.x6mmand 40mm x 40 mm x 6mm corners of the frame rafter and purline duly matered andelectrically welded with one coat of anticoressiveRed-Oxide Zine Crome Primer with taxes of all materials and labour etc. complete as per direction of the Engineer - in Charge |
| 132 | Suppling fitting & Fixing in Tata Blue schope sheet drilling holes in wind ties including fixing of ridges valleys wind ties etc including the cost of fittings cost of Tata Blue schope sheet with all fitting & drilling holes in wind ties including cost of sheets and fittings with all labour T&P and taxes etc completeas directed by the Engineer-in-Charge |
| 133 | Fly Ashbrick masonry in cement mortar (1:6) in foundation and plinth usingFly Ashbrick size 25cm x 12cm x 8cm and75 kg/cm2 with dimensional tolerance8% after immersing the bricks for six hours in water before use including splays cutting circular moulding corbelling chamfering and similar such type of work as directed by the Engineer-in-charge including watering and curing cost, conveyance, royalties and taxes of all materials and cost of all labour T&P required for the work and finished item of work shall confirm to relevant I.S. specification and confirm test as per specification as directed by the Engineer-in-charge. |
| 134 | 12mm(1/2\"\") thick cement Plaster (1:6) finished smooth to outside smooth surface of brick walls after racking out the joints including watering & curing etc. complete with cost, conveyance,royality and taxes of all materials & all labourT&Pdirected for the work etc. complete as directed by the Engineer - in - charge . |
| 135 | Providing Weather coat painting two coats ovar a coat of primerto out sidewall with any approved shade of including costconveyance, taxes of all materials and T & P required for the work including cost of paintetc all complete as directed by the Engineer-in-charge. |
| 136 | Painting twocoats anyapproved shade to wood or Iron works over a coat of primingincluding sand papering polishing the surface cost, conveyance, taxes of all materials & T&P required for the work including cost of paints etc complete as per the direction of the Engineer-in-charge. |
| 137 | Providing fitting and fixing of L. Hook & Washerincluding taxes of all materials and all labour and T&P etc. completeas per direction of the Engineer-in-charge |
| 138 | Earth work in excavation of foundation trenches in hard soil within 50 meter initial leadand 1.5mt. Intial lift including rough dressing and levelling the bed and depositing the soil away from work site including cost of all labour, T&P etc. complete as directed by the Engineer in Charge. |
| 139 | Supplying and filling foundation and plinth with sand well watered and rammed including cost, conveyance, royalties and taxes of all materials and cost of all labour, T&P required for the work etc. complete as directed by the Engineer-in Charge. |
| 140 | Cement concrete (1:4:8) using 4cm size hard granite metal in foundation and floors (below base course) using 4cm (1½ ‘’) size black hard granite metal of approved qualities from approved quarry including lowering laying concrete watering and curingand compacting etc. complete as required level laid in layers not exceeding (0’6’’) 15cm thick including cost, conveyance, royalties & taxes of all materials and cost of all labour T&P required for the work etc. complete in all respect as directed by the Engineer-in-charge. |
| 141 | R.C.Cwork M-20 grade 20mmsize hardcrusher broken granite chips fixed position including watering, curing cost, conveyance, royalties, taxes of all l materials and all labour T&P etc complete as per direction of the Engineer-in-charge. |
| 142 | Providing laying nad fixing 80mm thick factory made cement concrete interlocking paver Blocks of M30 grade made by machine with strong vibratory completion of approved size and shape laid in colour and pattern over 50mm thick complacted bed of course sandfilling the joints with fine sand etc complete including costconveyance, royalty, taxes of all materials and T & P required for the work including cost of paintetc all complete as directed by the Engineer-in-charge. |
| 143 | Repair to Entrance Gate with ACB Board, Stainless Steel Lettering at SDH Nilgiri under 5T for 2022-23 |
| 144 | Providing,fitting and fixing ACB Boardincluding of all materials, labour, conveyance, sundries, tools and plants etc complete in all respect as per the direction of Engineer-in-charge. |
| 145 | Stainless Steel Letteringetc complete in all respect as per the direction of Engineer-in-charge. |
| 146 | Construction of RCC Drain with Cover Slab at SDH Nilgiri for 2022-23 under 5T(Ama Hospital) |
| 147 | Earth work in road works and drainage works in ordinary soilwithin 50mt. initial lead and 1.5mt initial lift including rough dressing and breaking clods to 5 cm. to 7 cm. size laying in layers not more than 30 cm.in depth as per MoRT&H Specifications for Road and Bridge works(4th Revision) complet including all labours,hire and running charges of all machineries,T&P ,sundries etc. complete as per spcification and direction of Engineer-in-Charge.. |
| 148 | Filling road formationwith sand watered and rammed complete including cost,conveyance,Royalities, Taxes of all materials,all labours,hire and running charges of all machineries,T&P ,sundries etc. complete as per spcification and direction of Engineer-in-Charge. |
| 149 | Cement concrete(1:3:6) with 4cm size hard granite metal including mixing,conveying,laying,compacting the mix to required level and grade,cureing upto specified period with cost,conveyance, royality, taxes of all materials ,all labours, T&P, Sundries complete as per direction of Engineer-in-Charge. |
| 150 | R.C.C. work of M-20 grade with 20mm and down graded black hard granite crusher broken chips including mixing, hoisting, conveying, laying, compacting the mix to required level and grade, cureing upto specified period with cost, conveyance, royality, taxes of all materials , all labours, hire and running charges of all machineries,T&P,Sundries complete as per drawing, specification and direction of Engineer-in-Charge. |
| 151 | Supplying, fitting and placing uncoated HYSD reinforcement bars for RCC work including ,cutting ,bending ,binding,tying the grill with 18 to20 gauge binding wire and placing in position including cost,conveyance,taxes of reinforcement bars, binding wire etc and with , all labours, T&P, Sundries complete as per drawing, technical specification and direction of Engineer-in-Charge.(Linear length of reinforcement to be measured excluding overlaps, chairs, stays, hangers, spacer bars,wastage as cost ofthese items included in the rates for reinforcement and weight calculated basing on IS:1732.) |
| 152 | Providing 6mm thick cement plaster with (1:4) cement mortar to RCC surfacewith closed deep chipping and cement slurry treatment including cost,conveyance, royalty,taxes of all materials ,all labours, scaffolding,T&P sundries etc.complete as per specification and direction of Engineer-in-Charge. |
| 153 | Providing weep holes in Reinforced cement concrete wall with 100mm dia AC pipe,extending through the full width of the structure with slope of 1V:20H towords drawing face Complete as per drawing and Technical specification including cost,conveyance, royalty,taxes of all materials ,all labours,scaffolding, T&P sundries etc. complete as per direction of Engineering-in-charge. |
| 154 | Construction and Raising of Boundary Wall at SDH Nilgiri for the year 2022-23 under 5T(Ama Hospital) |
| 155 | Earth work in excavation of foundation trenches in hard soil within 50 meter initial leadand 1.5mt. Intial lift including rough dressing and levelling the bed and depositing the soil away from work site including cost of all labour, T&P etc. complete as directed by the Engineer in Charge. |
| 156 | Filling road formationwith sand watered and rammed complete including cost,conveyance,Royalities, Taxes of all materials,all labours,hire and running charges of all machineries,T&P ,sundries etc. complete as per spcification and direction of Engineer-in-Charge. |
| 157 | Cement concrete (1:4:8) using 4cm size hard granite metal in foundation and floors (below base course) using 4cm (1½ ‘’) size black hard granite metal of approved qualities from approved quarry including lowering laying concrete watering and curingand compacting etc. complete as required level laid in layers not exceeding (0’6’’) 15cm thick including cost, conveyance, royalties & taxes of all materials and cost of all labour T&P required for the work etc. complete in all respect as directed by the Engineer-in-charge. |
| 158 | R.C.C. work of M-20 grade with 20mm and down graded black hard granite crusher broken chips including mixing, hoisting, conveying, laying, compacting the mix to required level and grade, cureing upto specified period with cost, conveyance, royality, taxes of all materials , all labours, hire and running charges of all machineries,T&P,Sundries complete as per drawing, specification and direction of Engineer-in-Charge. ( Column Base) |
| 159 | Column |
| 160 | Grade Beam |
| 161 | Copping |
| 162 | Supplying, fitting and placing uncoated HYSD reinforcement bars for RCC work including ,cutting ,bending ,binding,tying the grill with 18 to20 gauge binding wire and placing in position including cost,conveyance,taxes of reinforcement bars, binding wire etc and with , all labours, T&P, Sundries complete as per drawing, technical specification and direction of Engineer-in-Charge.(Linear length of reinforcement to be measured excluding overlaps, chairs, stays, hangers, spacer bars,wastage as cost ofthese items included in the rates for reinforcement and weight calculated basing on IS:1732.) |
| 163 | Dismainteling brickor stone masonary in lime orcement mortarunder 3M (10\"\") height including stacking the useful materials for reuse and removing the debries within 50M lead as perdirection by theEngineer-in-charge |
| 164 | Fly Ashbrick masonry in cement mortar (1:6) in Superstructure usingFly Ashbrick size 25cm x 12cm x 8cm and75 kg/cm2 with dimensional tolerance8% after immersing the bricks for six hours in water before use including splays cutting circular moulding corbelling chamfering and similar such type of work as directed by the Engineer-in-charge including watering and curing cost, conveyance, royalties and taxes of all materials and cost of all labour T&P required for the work and finished item of work shall confirm to relevant I.S. specification and confirm test as per specification as directed by the Engineer-in-charge. |
| 165 | Fly ash brick masonry in cement mortar (1:6) in Superstructure with( Departmetal bricks)includingcost all labour T&P required for the work and finished item of work shall confirm to relevant I.S. specification and confirm test as per specification as directed by the Engineer-in-charge. |
| 166 | 6mm thick cement Plaster (1:4) to RCC surface after chipping the RCC surface and slurry trement including watering & curing etc. complete with cost, conveyance,royality and taxes of all materials & all labour royalty T&Pdirected for the work etc. complete as per directed by the Engineer-in-charge. |
| 167 | 12mm(1/2\"\") thick cement Plaster (1:6) finished smooth to outside smooth surface of brick walls after racking out the joints including watering & curing etc. complete with cost, conveyance,royality and taxes of all materials & all labourT&Pdirected for the work etc. complete as directed by the Engineer - in - charge . |
| 168 | 16 mm (5/8\") thick cement plasterin Cement Mortar(1:6) finished smooth to inside rough surface ofbrick walls after raking out joints scapping and cleaning the surface including watering and curing for specified period etc. complete with cost, conveyance , royality and taxes of all materials , and cost of all labourT&P directed for the work etc. complete as directed by the Engineer - in - charge . |
| 169 | Providing Weather coat painting two coats ovar a coat of primerto out sidewall with any approved shade of including costconveyance, taxes of all materials and T & P required for the work including cost of paintetc all complete as directed by the Engineer-in-charge. |
| 170 | SupplyingofM.S grill and gate manufactured from standard rolled steel anglewith corners of the frame duly matered and electrically welded with one coat of anticorresive red Red-Oxide Zinc Crome Primer including taxes of all materials as per the directed by the Engineer-in-charge. |
| 171 | Labour for fitting and fixingM.S Gate in position with cement concrete(1:3:6) with 12mm size chrusher broken chips including cost of all materilas, labour, T&P etc. complete.as per direction of the Engineer-in Charge. |
| 172 | Painting twocoats anyapproved shade to wood or Iron works over a coat of primingincluding sand papering polishing the surface cost, conveyance, taxes of all materials & T&P required for the work including cost of paints etc complete as per the direction of the Engineer-in-charge. |
| 173 | Providing and laying of interlocking paved Block ( Internal Area) at SDH Nilgiri for 2022-23 under 5T(Ama Hospital) |
| 174 | Earth work in excavation of foundation trenches in hard soil within 50 meter initial leadand 1.5mt. Intial lift including rough dressing and levelling the bed and depositing the soil away from work site including cost of all labour, T&P etc. complete as directed by the Engineer in Charge. |
| 175 | Filling road formationwith sand watered and rammed complete including cost,conveyance,Royalities, Taxes of all materials,all labours,hire and running charges of all machineries,T&P ,sundries etc. complete as per spcification and direction of Engineer-in-Charge. |
| 176 | Cement concrete (1:4:8) using 4cm size hard granite metal in foundation and floors (below base course) using 4cm (1½ ‘’) size black hard granite metal of approved qualities from approved quarry including lowering laying concrete watering and curingand compacting etc. complete as required level laid in layers not exceeding (0’6’’) 15cm thick including cost, conveyance, royalties & taxes of all materials and cost of all labour T&P required for the work etc. complete in all respect as directed by the Engineer-in-charge. |
| 177 | Providing laying nad fixing 80mm thick factory made cement concrete interlocking paver Blocks of M30 grade made by machine with strong vibratory completion of approved size and shape laid in colour and pattern over 50mm thick complacted bed of course sandfilling the joints with fine sand etc complete including costconveyance, royalty, taxes of all materials and T & P required for the work including cost of paintetc all complete as directed by the Engineer-in-charge. |
| 178 | P.C.Cwork M-20 grade 20mmsize hardcrusher broken granite chips fixed position including watering, curing cost, conveyance, royalties, taxes of all l materials and all labour T&P etc complete as per direction of the Engineer-in-charge. |
| 179 | Repair and Renovation to BMW Storage Point & Approach Road to BMW at SDH Nilgiri for 2022-23 under 5T(Ama Hospital) |
| 180 | Supplying fitting and fixingsteelM.S Angle A.C sheet roof ofsize 50mm.x50mm.x6mmand 40mm x 40 mm x 6mm corners of the frame rafter and purline duly matered andelectrically welded with one coat of anticoressiveRed-Oxide Zine Crome Primer with taxes of all materials and labour etc. complete as per direction of the Engineer - in Charge |
| 181 | Suppling fitting & Fixing in Tata Blue schope sheet drilling holes in wind ties including fixing of ridges valleys wind ties etc including the cost of fittings cost of Tata Blue schope sheet with all fitting & drilling holes in wind ties including cost of sheets and fittings with all labour T&P and taxes etc completeas directed by the Engineer-in-Charge |
| 182 | Fly Ashbrick masonry in cement mortar (1:6) in foundation and plinth usingFly Ashbrick size 25cm x 12cm x 8cm and75 kg/cm2 with dimensional tolerance8% after immersing the bricks for six hours in water before use including splays cutting circular moulding corbelling chamfering and similar such type of work as directed by the Engineer-in-charge including watering and curing cost, conveyance, royalties and taxes of all materials and cost of all labour T&P required for the work and finished item of work shall confirm to relevant I.S. specification and confirm test as per specification as directed by the Engineer-in-charge. |
| 183 | 12mm(1/2\"\") thick cement Plaster (1:6) finished smooth to outside smooth surface of brick walls after racking out the joints including watering & curing etc. complete with cost, conveyance,royality and taxes of all materials & all labourT&Pdirected for the work etc. complete as directed by the Engineer - in - charge . |
| 184 | Providing Weather coat painting two coats ovar a coat of primerto out sidewall with any approved shade of including costconveyance, taxes of all materials and T & P required for the work including cost of paintetc all complete as directed by the Engineer-in-charge. |
| 185 | Painting twocoats anyapproved shade to wood or Iron works over a coat of primingincluding sand papering polishing the surface cost, conveyance, taxes of all materials & T&P required for the work including cost of paints etc complete as per the direction of the Engineer-in-charge. |
| 186 | Providing fitting and fixing of L. Hook & Washerincluding taxes of all materials and all labour and T&P etc. completeas per direction of the Engineer-in-charge |
| 187 | Earth work in excavation of foundation trenches in hard soil within 50 meter initial leadand 1.5mt. Intial lift including rough dressing and levelling the bed and depositing the soil away from work site including cost of all labour, T&P etc. complete as directed by the Engineer in Charge. |
| 188 | Supplying and filling foundation and plinth with sand well watered and rammed including cost, conveyance, royalties and taxes of all materials and cost of all labour, T&P required for the work etc. complete as directed by the Engineer-in Charge. |
| 189 | Providing Cement concrete (1:3:6) using 40mm size clean hard granite crusher metal of approved quality from approved quarry including hoisting, lowering, laying concrete in layer not exceeding 15cm thick and compacting to the required thicknessand curing etc. complete includingcost, conveyance royalty and taxes of all materials and cost of labour ,T&P and other charges of machineries etc. required for the work as per specification & direction of the Engineer-in-charge. |
| 190 | R.C.Cwork M-20 grade 20mmsize hardcrusher broken granite chips fixed position including watering, curing cost, conveyance, royalties, taxes of all l materials and all labour T&P etc complete as per direction of the Engineer-in-charge. |
| 191 | Cement concrete (1:2:4) using 12 mm(½\") size hard crusher broken granite chips of approved quality from approved quarry including lowering lying concrete watering and curing etc. complete to required levels laid in layers including cost,conveyance,royalities and taxes of all materials and cost of all labour ,T&P required for the work etc. complete as directed by the Engineer-in-charge. |
| 192 | Providing fixing expansion joint in proper position as required for concrete road including cost, conveyance & taxes of all materials etc. complete as per specification and direction of Engineer in charge |
| 193 | Installation of Site Map and Signage at Hospital Entrance and their key location at SDH Nilgiri under 5T for 2022-23 |
| 194 | SIGNAGES :- Directional & Fire Exit - Providing and fixing 8mm thick clear acrylic autoglow sheet with vinyl text matching to specified colour, both sideS lettering as approved. Cost to be inclusive of wastage, suspension by means of SS strings,including of all materials, labour, conveyance, sundries, tools and plants etc complete in all respect as per the direction of Engineer-in-charge. |
| 195 | Fire Signages - Providing and fixing 8mm thick clear acrylic autoglow sheet with vinyl text matching to specified colour, both sideS lettering as approved. Cost to be inclusive of wastage, suspension by means of SS stringsincluding of all materials, labour, conveyance, sundries, tools and plants etc complete in all respect as per the direction of Engineer-in-charge. |
| 196 | Room Signage:- Type - 1, Size - 300mm x 100mm made of SS grade 202 plate with reversed etched letters in approved colour, pasted with 3M tape on desired surface including of all materials, labour, conveyance, sundries, tools and plants etc complete in all respect as per the direction of Engineer-in-charge. |
| 197 | Type - 2, Size - 300mm x 100mm made of SS grade 202 plate backing and acrylic slider with imported vinyl-cut letters, pasted with 3M tape on desired surface including of all materials, labour, conveyance, sundries, tools and plants etc complete in all respect as per the direction of Engineer-in-charge. |
| 198 | Type - 1, Size - 150mm x 100mm made of SS grade 202 plate with reversed etched letters in approved colour, pasted with 3M tape on desired surface to indicate Push & Pull including of all materials, labour, conveyance, sundries, tools and plants etc complete in all respect as per the direction of Engineer-in-charge. |
| 199 | Outer Signage :- SS English Letter of Size 400mm |
| 200 | SS Odia Letter of Size 300mm |
| 201 | Provision for Site Map for SDH,Nilgiri |
| 202 | Installation of Uniform Branding Mo Sarkar at SDH Nilgiri for 2022-23 under 5T |
| 203 | Installation of Uniform Branding Mo Sarkar Sign Board etc complete as per the direction of the Engineer -In-Charge |
| 204 | Construction of Ramp to 50 Bedded IPD Building and OPD complex at SDH Nilgiri for 2022-23 under 5T |
| 205 | Earth work in excavation of foundation trenches in hard soil within 50 meter initial leadand 1.5mt. Intial lift including rough dressing and levelling the bed and depositing the soil away from work site including cost of all labour, T&P etc. complete as directed by the Engineer in Charge. |
| 206 | Supplying and filling foundation and plinth with sand well watered and rammed including cost, conveyance, royalties and taxes of all materials and cost of all labour, T&P required for the work etc. complete as directed by the Engineer-in Charge. |
| 207 | Providing Cement concrete (1:3:6) using 40mm size clean hard granite crusher metal of approved quality from approved quarry including hoisting, lowering, laying concrete in layer not exceeding 15cm thick and compacting to the required thicknessand curing etc. complete includingcost, conveyance royalty and taxes of all materials and cost of labour ,T&P and other charges of machineries etc. required for the work as per specification & direction of the Engineer-in-charge. |
| 208 | R.C.C. work M-20grade with20mmand down grade C.Bchips having a minimum compressive strength (in work test) 200 kg/cm2 in 15cm cubes at 20 daysafter mixing and test conduct in accordance with I..S 456 and I.S 516 including hoisting lowring laying concrete andcompacting with vibrators, curing for 28 days with smoothcentering and shuttering and finishing the exposed surface smooth providing grooves or beads where necessary including cost, conveyance, royalties& T&Prequired for the work complete in all respect but excluding cost of HYSD and binding wires and labour charges for bending binding and tying the grills as per drawing, specification and direction of Engineer-in-Charge. ( Base/ Footing) |
| 209 | Grade Beam |
| 210 | Column |
| 211 | Prtico (F/Foor ) |
| 212 | Beam |
| 213 | 1St Floor |
| 214 | Roof Slab |
| 215 | 1St Floor |
| 216 | Supplying HYSD (FE 415)/ (FE 500) of SAIL/TATA/JINDAL STEEL/SHYAM STEEL for reinforcementtying the grills and placing in position as required for the RCC works and for providing fan hooks hoisting and lowering,laying including cost,conveyance & taxes of HYSD bars and binding wires of 18 to 20 gauge required for the work and bending binding and tying the grills ( Payment will be made on weight of HYSD bars only and no separate payment will be made towords the weight of binding wires)etc. complete as per specification and direction of the Engineer - in - charge |
| 217 | 1St Floor |
| 218 | Fly Ashbrick masonry in cement mortar (1:6) in Superstructure usingFly Ashbrick size 25cm x 12cm x 8cm and75 kg/cm2 with dimensional tolerance8% after immersing the bricks for six hours in water before use including splays cutting circular moulding corbelling chamfering and similar such type of work as directed by the Engineer-in-charge including watering and curing cost, conveyance, royalties and taxes of all materials and cost of all labour T&P required for the work and finished item of work shall confirm to relevant I.S. specification and confirm test as per specification as directed by the Engineer-in-charge. |
| 219 | 1St Floor |
| 220 | 12mm(1/2\"\") thick cement Plaster (1:6) finished smooth to outside smooth surface of brick walls after racking out the joints including watering & curing etc. complete with cost, conveyance,royality and taxes of all materials & all labourT&Pdirected for the work etc. complete as directed by the Engineer - in - charge . |
| 221 | 1St Floor |
| 222 | 16 mm (5/8\") thick cement plasterin Cement Mortar(1:6) finished smooth to inside rough surface ofbrick walls after raking out joints scapping and cleaning the surface including watering and curing for specified period etc. complete with cost, conveyance , royality and taxes of all materials , and cost of all labourT&P directed for the work etc. complete as directed by the Engineer - in - charge . |
| 223 | 1St Floor |
| 224 | 12 mm (½\") thick cement plaster (1 : 4) with neat cement punning finished smooth to outside surface of brick walls after raking out joints including watering and curing etc complete including cost , conveyance , royality and taxes of all materials , cost of all labour and T&P required for the work etc complete as directed by the Engineer - in - charge . |
| 225 | 6mm thick cement Plaster (1:4) to RCC surface after chipping the RCC surface and slurry trement including watering & curing etc. complete with cost, conveyance,royality and taxes of all materials & all labour royalty T&Pdirected for the work etc. complete as per directed by the Engineer-in-charge. |
| 226 | 1St Floor |
| 227 | Supplying, fitting and fixing of vitrified Industrialtile coloured and printed tile of size 300mm x 300mm of approved make in floors,treads or steps and landing on 25mm thick bed of cement mortar 1:4 (1 cement : 4 sand) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete including cost of all materials , taxes,labour,T&P etc required for the work as directed by the Engineer-in charge |
| 228 | Fixing ceramic tiles in dado,skirting and rises steps 20cm x 30cm / 20cm x 20cm special plane/ printed series of premium grade havingthickness 6.5mm to 6.7 mmconforming to IS 13753 on 12mm thick bed cement morter 1:3 ( 1 cement :3 Sand) jointed with neat cement slurry mixed with pigments to match theshade of thetiles including rubbing and polishingetc. all complete including cost of tiles and labour etc.required for the work as directed by the Engineer-in charge |
| 229 | 1st Floor |
| 230 | Supplying,fitting and fixing of approved quality of stainless steel of 304 grade inhand railing using50mm dia assing 2mm. thick circular pipe with palmtread size 32mm x 32mmx 2mm @ 0.90 mtr C/C and stainless square pipe of size 32mmx32mmx2mm in 3 rows in staircaefixing in position including cost of stainless still cost, conveyance,and taxes of all materials and all labour etc complete as per direction of the Engineer - in Charge . |
| 231 | 1st floor |
| 232 | SupplyingofM.S grill and gate manufactured from standard rolled steel anglewith corners of the frame duly matered and electrically welded with one coat of anticorresive red Red-Oxide Zinc Crome Primer including taxes of all materials as per the directed by the Engineer-in-charge. |
| 233 | Labour for fitting and fixingM.S Gate/Grillin position with cement concrete(1:3:6) with 12mm size chrusher broken chips including cost of all materilas, labour, T&P etc. complete.as per direction of the Engineer-in Charge. |
| 234 | 2.5 cm(1\") thick grading concrete (1:2:2) on roof slab with 6mm size hard broken granite chips on new work including cost, conveyance, royalties and taxes of all materials, cost of all labour T&P etc. required for the work as directed by the Engineer-in-charge |
| 235 | Finishing wall surface with Acrilic wall putty ( water based ) of approved make and finished smooth and even surface to receive painting , cost, conveyance, taxes of all materials and T&P required for the work including cost of scaffolding ,staging charges etc complete as per the direction of the Engineer-in-charge |
| 236 | Priming onecoatover new plaster surface with any approved shade including sand papering polishing the surface cost, conveyance, taxes of all materials & T&P etc. complete as per direction ofthe Engineer-in-charge. |
| 237 | Wall painting two coats with plastic emulsion paint of approved shade on new surface to give an even shade including cost of plastic emulsion paint, labour, T&P required for the work etc. all complete as directed by the Engineer-in-charge. |
| 238 | 1St Floor |
| 239 | Providing Weather coat painting two coats to out sidewall with any approved shade of including costconveyance, taxes of all materials and T & P required for the work including cost of paintetc all complete as directed by the Engineer-in-charge. |
| 240 | 1St Floor |
| 241 | Painting twocoats anyapproved shade to wood or Iron works over a coat of primingincluding sand papering polishing the surface cost, conveyance, taxes of all materials & T&P required for the work including cost of paints etc complete as per the direction of the Engineer-in-charge. |
| 242 | 1St Floor |
| 243 | .Supplying ,Fitting and Fixing up window (sliding type) made up aluminum section 9778 as windows frame section No 4095 , 4096 and 9777, 3994 as shutter frame with 5mm thick black glass as panel fitted with rubber bending includinglucking arrangement including all fitting including cost of materials all taxes , labour , T&P excluding cost of glass etc complete as per the direction of Engineer-in charge. |
| 244 | Ribaringof RCC Structure steel of different size including drilling hole and fixing steel with appoxy grouting of Wurth-PE-500 including all cost taxes of all materials labour T&P etc completeas per the direction of Engineer-in charge.(12mm) |
| 245 | 16MM |
| 246 | 20MM |
| 247 | Repair and Renovation to EYE Ward at SDH Nilgiri for 2022-23 under 5T(Ama Hospital) |
| 248 | Dismantling and removing old lime cement plasterfrom brick wall including raking out joints 12 mm deep and removing the debris within 50 mtr. lead. from work site including cost of all labour ,T&P etc. complete asdirected by the Engineer-in-charge |
| 249 | Dismantling and removing 2.5 cm grading concrete from roof slab cleaning the surface lowering & removing the debris within 50 meter lead including cost of all labour, T&P etc. required complete as directed by the Engineer- in- Charge. |
| 250 | Dismantling and removing mable chippsflooring including stacking of the materialsfor reuse and removing the debris within 50 meter lead including cost of all labour, T&P etc. required complete as directed by the Engineer- in- Charge. |
| 251 | Dismainteling brick mesonary in cement morter under 3M(10\"\") height including stacking the useful materials for reuse and removing the debries within 50M lead including cost of all labour, T&P etc. required complete asdirection by theEngineer-in-charge |
| 252 | Desmentling and removing door and windows after carefully removing the bolts and nuts including staking the useful materials for re-use and removing the debries with 50m leads as per direction of the Engineer-in-charge |
| 253 | Fly Ashbrick masonry in cement mortar (1:6) in Superstructure usingFly Ashbrick size 25cm x 12cm x 8cm and75 kg/cm2 with dimensional tolerance8% after immersing the bricks for six hours in water before use including splays cutting circular moulding corbelling chamfering and similar such type of work as directed by the Engineer-in-charge including watering and curing cost, conveyance, royalties and taxes of all materials and cost of all labour T&P required for the work and finished item of work shall confirm to relevant I.S. specification and confirm test as per specification as directed by the Engineer-in-charge. |
| 254 | 4cm thick grading concrete (1:2:4)using12mm size hard broken granite chipsincluding watering and curing cost conveyance, royalties and taxes of all materials, cost of all labour T&P etc. required for the work as directed by the Engineer-in-charge |
| 255 | Supplying, fitting and fixing vitrifiedcoloured and printed tile of size 600mm x 600mm of approved make in floors,treads or steps and landing on 25mm thick bed of cement mortar 1:4 (1 cement : 4 sand) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete including cost of all materials , taxes,labour,T&P etc required for the work as directed by the Engineer-in charge |
| 256 | Fixing vitrifiedtiles in dado,skirting and rises steps 20cm x 30cm / 20cm x 20cm special plane/ printed series of premium grade havingthickness 6.5mm to 6.7 mmconforming to IS 13753 on 12mm thick bed cement morter 1:3 ( 1 cement :3 Sand) jointed with neat cement slurry mixed with pigments to match theshade of thetiles including rubbing and polishingetc. all complete including cost of tiles and labour etc.required for the work as directed by the Engineer-in charge |
| 257 | Fixing ceramic tiles in dado,skirting and rises steps 20cm x 30cm / 20cm x 20cm special plane/ printed series of premium grade havingthickness 6.5mm to 6.7 mmconforming to IS 13753 on 12mm thick bed cement morter 1:3 ( 1 cement :3 Sand) jointed with neat cement slurry mixed with pigments to match theshade of thetiles including rubbing and polishingetc. all complete including cost of tiles and labour etc.required for the work as directed by the Engineer-in charge |
| 258 | Fixing of marble tiles in floors,treads or steps and landing on 25mm thick bed of cement mortar 1:4 (1 cement : 4sand) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete including cost of all materials , taxes,labour,T&P etc required for the work as directed by the Engineer-in charge |
| 259 | Fixing of marble tiles in dado on 12mm thick bed ofcement mortar 1:4 (1 cement : 4 sand) joint withneat cementslurry mixed with pigments to match theshade of thetiles including rubbing and polishing complete excluding cost of tiles or stone etc. all complete including cost of tiles and labour etc.required for the work as directed by the Engineer-in charge |
| 260 | 12mm(1/2\"\") thick cement Plaster (1:6) finished smooth to outside smooth surface of brick walls after racking out the joints including watering & curing etc. complete with cost, conveyance,royality and taxes of all materials & all labourT&Pdirected for the work etc. complete as directed by the Engineer - in - charge . |
| 261 | 6mm thick cement Plaster (1:4) to RCC surface after chipping the RCC surface and slurry trement including watering & curing etc. complete with cost, conveyance,royality and taxes of all materials & all labour royalty T&Pdirected for the work etc. complete as per directed by the Engineer-in-charge. |
| 262 | Wall painting two coats with plastic emulsion paint of approved shade on new surface to give an even shade including cost of plastic emulsion paint, labour, T&P required for the work etc. all complete as directed by the Engineer-in-charge. |
| 263 | Finishing wall surface with Acrilic wall putty ( water based ) of approved make and finished smooth and even surface to receive painting , cost, conveyance, taxes of all materials and T&P required for the work including cost of scaffolding ,staging charges etc complete as per the direction of the Engineer-in-charge |
| 264 | Providing Weather coat painting two coats to out sidewall with any approved shade of including costconveyance, taxes of all materials and T & P required for the work including cost of paintetc all complete as directed by the Engineer-in-charge. |
| 265 | Providing fitting, fixing of AL door with anodized Al door section of 9202 as vertical member, 9201 as top member and 9200 as bottam and middle member with frame section no 9221 with tappered clip No 4660 and the frame to be completed by means of jointing angle No 1855 including all cost of labour ,T&P,hire charges of drilling machine,labour charges etc complete as per the direction of the Engineer-in charge excluding cost of laminated board . |
| 266 | .Supplying ,Fitting and Fixing up window (sliding type) made up aluminum section 9778 as windows frame section No 4095 , 4096 and 9777, 3994 as shutter frame with 5mm thick black glass as panel fitted with rubber bending includinglucking arrangement including all fitting including cost of materials all taxes , labour , T&P excluding cost of glass etc complete as per the direction of Engineer-in charge. |
| 267 | Providing fitting and fixing up partition walling OEL aluminum anodized section No.9210 and 9207 as single groove and double groove respectively as horizontal and vertical member and OEL section 4660 as Tapered clip for fixing up 12mm thick pre laminated board (Nove pan make) and jointing angle No. 1855 etc. complete as per direction of Engineer-in-charge. |
| 268 | Supplying, fitting and fixing F.R.P/ PVC doorshutter in position includingmending & cutting to size with cost nails and screw,including cost of materials, cost of labour required for the work etc. complete as directed by the Engineer-in-charge. |
| 269 | SupplyingofM.Sdoor and window grillmanufactured from standard rolled steel angle with corners of the frame duly matered and electrically welded with one coat of anticorresive red Red-Oxide Zinc Crome Primer including taxes of all materials as per the directed by the Engineer-in-charge. |
| 270 | Labour for fitting and fixingM.SGrill/ Gate in position with cement concrete(1:3:6) with 12mm size chrusher broken chips including cost of all materilas, labour, T&P etc. complete.as per direction of the Engineer-in Charge. |
| 271 | Painting twocoats anyapproved shade to wood or Iron works over a coat of primingincluding sand papering polishing the surface cost, conveyance, taxes of all materials & T&P required for the work including cost of paints etc complete as per the direction of the Engineer-in-charge. |
| 272 | Earth work in excavation of foundation trenches in hard soil within 50 meter initial leadand 1.5mt. Intial lift including rough dressing and levelling the bed and depositing the soil away from work site including cost of all labour, T&P etc. complete as directed by the Engineer in Charge. |
| 273 | Supplying and filling foundation and plinth with sand well watered and rammed including cost, conveyance, royalties and taxes of all materials and cost of all labour, T&P required for the work etc. complete as directed by the Engineer-in Charge. |
| 274 | Cement concrete (1:4:8) using 4cm size hard granite metal in foundation and floors (below base course) using 4cm (1½ ‘’) size black hard granite metal of approved qualities from approved quarry including lowering laying concrete watering and curingand compacting etc. complete as required level laid in layers not exceeding (0’6’’) 15cm thick including cost, conveyance, royalties & taxes of all materials and cost of all labour T&P required for the work etc. complete in all respect as directed by the Engineer-in-charge. |
| 275 | Cement concrete (1:2:4) using 12 mm(½\") size hard crusher broken granite chips of approved quality from approved quarry including lowering lying concrete watering and curing etc. complete to required levels laid in layers including cost,conveyance,royalities and taxes of all materials and cost of all labour ,T&P required for the work etc. complete as directed by the Engineer-in-charge. |
| 276 | Fly Ashbrick masonry in cement mortar (1:6) in Superstructure usingFly Ashbrick size 25cm x 12cm x 8cm and75 kg/cm2 with dimensional tolerance8% after immersing the bricks for six hours in water before use including splays cutting circular moulding corbelling chamfering and similar such type of work as directed by the Engineer-in-charge including watering and curing cost, conveyance, royalties and taxes of all materials and cost of all labour T&P required for the work and finished item of work shall confirm to relevant I.S. specification and confirm test as per specification as directed by the Engineer-in-charge. |
| 277 | Scrapingclearing the old paint from plaster surface with soap and soda includingsand papering includingscrffolding charges up to 5m heightincluding cost of all materials, Taxes, Cost of all labour, etc. completeas directed by the Engineer-in-charge |
| 278 | Repair and Renovation to Labour Room and OG Ward at SDH Nilgiri for the year 2022-23 under 5T(Ama Hospital) |
| 279 | Dismantling and removing old lime cement plasterfrom brick wall including raking out joints 12 mm deep and removing the debris within 50 mtr. lead. from work site including cost of all labour ,T&P etc. complete asdirected by the Engineer-in-charge |
| 280 | Dismantling and removing 2.5 cm grading concrete from roof slab cleaning the surface lowering & removing the debris within 50 meter lead including cost of all labour, T&P etc. required complete as directed by the Engineer- in- Charge. |
| 281 | 2.5 cm(1\") thick grading concrete (1:2:2) on roof slab with 6mm size hard broken granite chips on new work including cost, conveyance, royalties and taxes of all materials, cost of all labour T&P etc. required for the work as directed by the Engineer-in-charge |
| 282 | Dismantling and removingOldtile flooring including stacking of the materialsfor reuse and removing the debris within 50 meter lead including cost of all labour, T&P etc. required complete as directed by the Engineer- in- Charge. |
| 283 | 12mm(1/2\"\") thick cement Plaster (1:6) finished smooth to outside smooth surface of brick walls after racking out the joints including watering & curing etc. complete with cost, conveyance,royality and taxes of all materials & all labourT&Pdirected for the work etc. complete as directed by the Engineer - in - charge . |
| 284 | 6mm thick cement Plaster (1:4) to RCC surface after chipping the RCC surface and slurry trement including watering & curing etc. complete with cost, conveyance,royality and taxes of all materials & all labour royalty T&Pdirected for the work etc. complete as per directed by the Engineer-in-charge. |
| 285 | Wall painting two coats with plastic emulsion paint of approved shade on new surface to give an even shade including cost of plastic emulsion paint, labour, T&P required for the work etc. all complete as directed by the Engineer-in-charge. |
| 286 | Providing fitting, fixing of AL door with anodized Al door section of 9202 as vertical member, 9201 as top member and 9200 as bottam and middle member with frame section no 9221 with tappered clip No 4660 and the frame to be completed by means of jointing angle No 1855 including all cost of labour ,T&P,hire charges of drilling machine,labour charges etc complete as per the direction of the Engineer-in charge excluding cost of laminated board . |
| 287 | .Supplying ,Fitting and Fixing up window (sliding type) made up aluminum section 9778 as windows frame section No 4095 , 4096 and 9777, 3994 as shutter frame with 5mm thick black glass as panel fitted with rubber bending includinglucking arrangement including all fitting including cost of materials all taxes , labour , T&P excluding cost of glass etc complete as per the direction of Engineer-in charge. |
| 288 | SupplyingofM.S grill and gate manufactured from standard rolled steel anglewith corners of the frame duly matered and electrically welded with one coat of anticorresive red Red-Oxide Zinc Crome Primer including taxes of all materials as per the directed by the Engineer-in-charge. |
| 289 | Labour for fitting and fixingM.SGrill/ Gate in position with cement concrete(1:3:6) with 12mm size chrusher broken chips including cost of all materilas, labour, T&P etc. complete.as per direction of the Engineer-in Charge. |
| 290 | Painting twocoats anyapproved shade to wood or Iron works over a coat of primingincluding sand papering polishing the surface cost, conveyance, taxes of all materials & T&P required for the work including cost of paints etc complete as per the direction of the Engineer-in-charge. |
| 291 | Scrapingclearing the old paint from plaster surface with soap and soda includingsand papering includingscrffolding charges up to 5m heightincluding cost of all materials, Taxes, Cost of all labour, etc. completeas directed by the Engineer-in-charge |
| 292 | Repair and Renovation to OT Room at SDH Nilgiri for 2022-23 under 5T(Ama Hospital) |
| 293 | Dismantling and removing old lime cement plasterfrom brick wall including raking out joints 12 mm deep and removing the debris within 50 mtr. lead. from work site including cost of all labour ,T&P etc. complete asdirected by the Engineer-in-charge |
| 294 | Dismantling and removing 2.5 cm grading concrete from roof slab cleaning the surface lowering & removing the debris within 50 meter lead including cost of all labour, T&P etc. required complete as directed by the Engineer- in- Charge. |
| 295 | Dismantling and removingOldtile flooring including stacking of the materialsfor reuse and removing the debris within 50 meter lead including cost of all labour, T&P etc. required complete as directed by the Engineer- in- Charge. |
| 296 | Dismantling and removingMarble chips dado,skirting from wallincluding stacking of the materialsfor reuse and removing the debris within 50 meter lead including cost of all labour, T&P etc. required complete as directed by the Engineer- in- Charge. |
| 297 | Dismainteling brick mesonary in cement morter under 3M(10\"\") height including stacking the useful materials for reuse and removing the debries within 50M lead including cost of all labour, T&P etc. required complete asdirection by theEngineer-in-charge |
| 298 | Fly Ashbrick masonry in cement mortar (1:6) in Superstructure usingFly Ashbrick size 25cm x 12cm x 8cm and75 kg/cm2 with dimensional tolerance8% after immersing the bricks for six hours in water before use including splays cutting circular moulding corbelling chamfering and similar such type of work as directed by the Engineer-in-charge including watering and curing cost, conveyance, royalties and taxes of all materials and cost of all labour T&P required for the work and finished item of work shall confirm to relevant I.S. specification and confirm test as per specification as directed by the Engineer-in-charge. |
| 299 | Supplying, fitting and fixing vitrifiedcoloured and printed tile of size 600mm x 600mm of approved make in floors,treads or steps and landing on 25mm thick bed of cement mortar 1:4 (1 cement : 4 sand) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete including cost of all materials , taxes,labour,T&P etc required for the work as directed by the Engineer-in charge |
| 300 | Fixing vitrifiedtiles in dado,skirting and rises steps 20cm x 30cm / 20cm x 20cm special plane/ printed series of premium grade havingthickness 6.5mm to 6.7 mmconforming to IS 13753 on 12mm thick bed cement morter 1:3 ( 1 cement :3 Sand) jointed with neat cement slurry mixed with pigments to match theshade of thetiles including rubbing and polishingetc. all complete including cost of tiles and labour etc.required for the work as directed by the Engineer-in charge |
| 301 | Supplying, fitting and fixing ceramic tilesof primium grade having thickness 7mm to 8 mmconforming to IS 13755 of section 30x30 cm or 40x40 cm plane or printed in floor treads or steps and landing on 25mm thick bed in cement mortar (1:4) (1 Cement : 4 Sand) jointed with neat cement slurry mixed with pigments to match the dadoes of the tiles including rubbing and polishing etc. all complete including cost of tiles and labour etc.required for the work as directed by the Engineer-in charge |
| 302 | Fixing ceramic tiles in dado,skirting and rises steps 20cm x 30cm / 20cm x 20cm special plane/ printed series of premium grade havingthickness 6.5mm to 6.7 mmconforming to IS 13753 on 12mm thick bed cement morter 1:3 ( 1 cement :3 Sand) jointed with neat cement slurry mixed with pigments to match theshade of thetiles including rubbing and polishingetc. all complete including cost of tiles and labour etc.required for the work as directed by the Engineer-in charge |
| 303 | Supplying, fitting and fixing of vitrified Industrialtile coloured and printed tile of size 300mm x 300mm of approved make in floors,treads or steps and landing on 25mm thick bed of cement mortar 1:4 (1 cement : 4 sand) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete including cost of all materials , taxes,labour,T&P etc required for the work as directed by the Engineer-in charge |
| 304 | 2.5 cm(1\") thick grading concrete (1:2:2) on roof slab with 6mm size hard broken granite chips on new work including cost, conveyance, royalties and taxes of all materials, cost of all labour T&P etc. required for the work as directed by the Engineer-in-charge |
| 305 | 12mm(1/2\"\") thick cement Plaster (1:6) finished smooth to outside smooth surface of brick walls after racking out the joints including watering & curing etc. complete with cost, conveyance,royality and taxes of all materials & all labourT&Pdirected for the work etc. complete as directed by the Engineer - in - charge . |
| 306 | 6mm thick cement Plaster (1:4) to RCC surface after chipping the RCC surface and slurry trement including watering & curing etc. complete with cost, conveyance,royality and taxes of all materials & all labour royalty T&Pdirected for the work etc. complete as per directed by the Engineer-in-charge. |
| 307 | Wall painting two coats with plastic emulsion paint of approved shade on new surface to give an even shade including cost of plastic emulsion paint, labour, T&P required for the work etc. all complete as directed by the Engineer-in-charge. |
| 308 | Finishing wall surface with Acrilic wall putty ( water based ) of approved make and finished smooth and even surface to receive painting , cost, conveyance, taxes of all materials and T&P required for the work including cost of scaffolding ,staging charges etc complete as per the direction of the Engineer-in-charge |
| 309 | Providing Weather coat painting two coats ovar a coat of primerto out sidewall with any approved shade of including costconveyance, taxes of all materials and T & P required for the work including cost of paintetc all complete as directed by the Engineer-in-charge. |
| 310 | Painting twocoats anyapproved shade to wood or Iron works over a coat of primingincluding sand papering polishing the surface cost, conveyance, taxes of all materials & T&P required for the work including cost of paints etc complete as per the direction of the Engineer-in-charge. |
| 311 | Suppling fitting & Fixing in position well dressedwellnon sal wood work inchoukaths including two coats of coaltaring to wall side faces and fixed the same with required No. of W.I clamps with approved quality of screws including cost, conveyance,royalities & taxes of all materials,and cost of all labour T&P required for the work etc. complete as directed by the Engineer-in-Charge |
| 312 | Providing fitting, fixing of AL door with anodized Al door section of 9202 as vertical member, 9201 as top member and 9200 as bottam and middle member with frame section no 9221 with tappered clip No 4660 and the frame to be completed by means of jointing angle No 1855 including all cost of labour ,T&P,hire charges of drilling machine,labour charges etc complete as per the direction of the Engineer-in charge excluding cost of laminated board . |
| 313 | .Supplying ,Fitting and Fixing up window (sliding type) made up aluminum section 9778 as windows frame section No 4095 , 4096 and 9777, 3994 as shutter frame with 5mm thick black glass as panel fitted with rubber bending includinglucking arrangement including all fitting including cost of materials all taxes , labour , T&P excluding cost of glass etc complete as per the direction of Engineer-in charge. |
| 314 | Providing fitting and fixing up partition walling OEL aluminum anodized section No.9210 and 9207 as single groove and double groove respectively as horizontal and vertical member and OEL section 4660 as Tapered clip for fixing up 12mm thick pre laminated board (Nove pan make) and jointing angle No. 1855 etc. complete as per direction of Engineer-in-charge. |
| 315 | Supplying, fitting and fixing F.R.P/ PVC doorshutter in position includingmending & cutting to size with cost nails and screw,including cost of materials, cost of labour required for the work etc. complete as directed by the Engineer-in-charge. |
| 316 | SupplyingofM.S grill and gate manufactured from standard rolled steel anglewith corners of the frame duly matered and electrically welded with one coat of anticorresive red Red-Oxide Zinc Crome Primer including taxes of all materials as per the directed by the Engineer-in-charge. |
| 317 | Labour for fitting and fixingM.S Gate in position with cement concrete(1:3:6) with 12mm size chrusher broken chips including cost of all materilas, labour, T&P etc. complete.as per direction of the Engineer-in Charge. |
| 318 | Scrapingclearing the old paint from plaster surface with soap and soda includingsand papering includingscrffolding charges up to 5m heightincluding cost of all materials, Taxes, Cost of all labour, etc. completeas directed by the Engineer-in-charge |
| 319 | (E.I Work) Recessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metallic PVC flexible conduit with 5Amp, 250V modular type switch ISI marked and modular ceiling rose ISI marked mounted on modular MSbox having front modularcover plate of suitable size, modular MSbox with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection (Make of wire- Legrand/Schneider/L&T anti bacterial type) Group-AL.P. |
| 320 | Group-BL.P. |
| 321 | Group-CL.P. |
| 322 | Group-AF.P. |
| 323 | Group-BF.P. |
| 324 | Group-CF.P. |
| 325 | S/F of Modular Computer point consisting of 3 no. of 6/16 Ampswitch and sockets(make- Legrand/Schneider/L&T anti bacterial type) |
| 326 | S/F of 6 Amp modular switch and socket on separate board (make- Legrand/Schneider/L&T anti bacterial type) |
| 327 | S/F of 6 Amp modular switch and socket on existing board (make- Legrand/Schneider/L&T anti bacterial type) |
| 328 | S/F of 16 Amp modular switch and socket on separate board (make- Legrand/Schneider/L&T anti bacterial type) |
| 329 | S/F of AC point modular type including 15 Amp socket, starter,32 Amp DP MCB and top as required (make- Legrand/Schneider/L&T anti bacterial type) |
| 330 | Recessed wiring to submain in the following sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in the following mm dia non-metallic heavy duty flexible conduit 1.6 mm thick along with the following sq.mm FR PVC insulatedsingle core multistrand copper conductoras earth wire as (Make of wire- Havells/Polycab/Finolex) 2 X 1.5 sq.mm +1 X 1.5 sq.mm in 20 mm dia |
| 331 | 2 X 2.5 sq.mm +1 X 1.5 sq.mm-do- |
| 332 | 2X4 sqmm. + 1x1.5 sqmm. |
| 333 | 4X6 sqmm.+ 1x2.5 sqmm. |
| 334 | 4X10 sqmm. +1X 4 sqmm. In 32 mm dia |
| 335 | Supply and fixing of following way double pole/ triple pole steel MCB distribution board 240/400 V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator)12 way single pole DB Double door (make- Legrand/Schneider/L&T ) |
| 336 | 4 way (4+12) way double door TPN DB (make-Legrand/Schneider/L&T) |
| 337 | 100 Amp TPN Main Switch (make-Legrand/Schneider/L&T) |
| 338 | 63 Amp DP Main Switch(make-Legrand/Schneider/L&T) |
| 339 | 63 Amp TPN Main Switch (make-Legrand/Schneider/L&T) |
| 340 | 63 Amp TPN MCB (make-Legrand/Schneider/L&T) |
| 341 | 5amp-32 Amp SP mcb B/C series (make-Legrand/Schneider/L&T) |
| 342 | 32 A DP MCB (make-Legrand/Schneider/L&T) |
| 343 | S/F of ceiling fan modular regulator(make- Legrand/Schneider/L&T ) |
| 344 | Maintenance free chemical earthing GI electrode, 80-100 micron Galvanization, IS 3043/IEEE-837, Earthing fault capacity 25 KA & Peak Fault current at 50 KA for 1 sec, 0.2%/year deviation of earthing value with respect to time, 58 mm dia of electrode, 2000 mm length of electrode, Approx 8 KG weight of electrode, crystalline conductive mixture inside filling material, 3000x25x3 mm connection strip, 10 mm terminal hole dia, Ground filling material (BFC) as per IS3043/IEEE 837, Standard chemical composition, 0.12 ohm per meter resistivity value, 1089 degree centrigrade melting temperature, 7.89 PH Value, 0.5 solubility in water, color greyor black , 10% moisture capacity at 105 degree, weight of chemical used/earthing pit 1 bag of 25 KG, 20 times water absorbing capacity and eco friendly. |
| 345 | S/L of 8 SWGcopperon surface or in recess |
| 346 | S/F of45 watt LED street lightwith 5700 CCT (K), 70 CRI, Almn. Die cast powder coated in matt black, polycarbonate IP Lens Module, 4 KV inbuilt in Driver, P.F. >=0.95, ITHD < 10%, IP66complete in all respect (make- Havells/Philips/Halonix/Wipro) |
| 347 | S/F of 20 watt LED Tube Light with efficacy upto 110 lm/W, high performance diffuser for soft and glare free light, LM 80 tested LED technology, Driver with high voltage protection technology, Driver with high voltage protection upto 380 VAC, Surge protection upto 2.5 KV, 6500 CCT (K), 2000 Lm (make- Havells/Philips/Halonix/Wipro) |
| 348 | 630Amp Main Panel:- SUPPLY AND FIXING OF 1no. of cubicle panelof 2mm thick CRCA panel box of follwing dimensuion:-1.2 m x 1.2 m(30 cm depth)= 1.44sqmtrin complete fabrication of metal clad,powder coated,compartmentalised cubicle panel as per CPWD Electrical specification including insulated busbars,supports,interconnections,erection of switchgears and making provisions of incoming/outgoing cables etc.- |
| 349 | S/F of Ammetter (0 to 500A) with selecter switch including Make- AE all accessories, Make - A.E./L&T/C&S or equivalent |
| 350 | S/F of Voltmeter(0 to 500A) with selecter switch including all accessories, Make - A.E./L&T/C&S or equivalent |
| 351 | S/F ofIndicator lamp with toggle switch and fuse. Make- A.E./L&T/C&S or Equivalent |
| 352 | S/F of C.T. Coll upto 400/5amps including all connection. |
| 353 | S/F of 63 Amp 4 pole DU 100 H type 30 KA MCCB with adjustable setting thermal range of 50 to 63 Amp (make-Legrand/Schneider/L&T) |
| 354 | S/F of 250 Amp DU250 36 KA 4 Pole MCCB with adjustable setting thermal range of 200-250 Amp (make-Legrand/Schneider/L&T) |
| 355 | S/F of 320 Amp DU400N 50 KA 4 Pole MCCB with adjustable setting thermal range of 320-400 Amp (make-Legrand/Schneider/L&T) |
| 356 | S/F of 630 Amp 4 pole MCCB with thermal magnetic release range 500-630 Amp DN3-630N Type, Breaking capacity 70 KA(make-Legrand/Schneider/L&T) |
| 357 | Provision for cable glands,lugs, cable marker etc. |
| 358 | 250Amp DG Panel :- SUPPLY AND FIXING OF 1no. of cubicle panelof 2mm thick CRCA panel box of follwing dimensuion:-1 m x 1 m(30 cm depth)= 1 sqmtrin complete fabrication of metal clad,powder coated,compartmentalised cubicle panel as per CPWD Electrical specification including insulated busbars,supports,interconnections,erection of switchgears and making provisions of incoming/outgoing cables etc.- |
| 359 | S/F of Ammetter (0 to 500A) with selecter switch including Make- AE all accessories, Make - A.E./L&T/C&S or equivalent |
| 360 | S/F of Voltmeter(0 to 500A) with selecter switch including all accessories, Make - A.E./L&T/C&S or equivalent |
| 361 | S/F ofIndicator lamp with toggle switch and fuse. Make- A.E./L&T/C&S or Equivalent |
| 362 | S/F of C.T. Coll upto 400/5amps including all connection. Make- A.E./L&T/C&S or Equivalent |
| 363 | S/F of 250 Amp DU250 36 KA 4 Pole MCCB with adjustable setting thermal range of 200-250 Amp(make-Legrand/Schneider/L&T) |
| 364 | S/F of 100 Amp DU100H Type 30 KA 4 PoleMCCB with adjustable setting thermal range of 80-100 Amp. (make-Legrand/Schneider/L&T) |
| 365 | S/F of 63 Amp 4 pole DU 100 H type 30 KA MCCB with adjustable setting thermal range of 50 to 63 Amp (make-Legrand/Schneider/L&T) |
| 366 | S/F of 250 Amp Changeover switch (make-Legrand/Schneider/L&T) |
| 367 | Provision for cable glands,lugs, cable marker etc. |
| 368 | 4 way (4+12) way double door TPN DB (make-Legrand/Schneider/L&T) |
| 369 | 63 Amp TPN Main Switch (make-Legrand/Schneider/L&T) |
| 370 | 63 Amp TPN MCB (make-Legrand/Schneider/L&T |
| 371 | 5amp-32 Amp SP mcb B/C series (make-Legrand/Schneider/L&T |
| 372 | S/F of 63 Amp MCCB Enclosure (make-Legrand/Schneider/L&T |
| 373 | S/F of 63 Amp 4 pole DU 100 H type 30 KA MCCB with adjustable setting thermal range of 50 to 63 Amp (make-Legrand/Schneider/L&T |
| 374 | S/F of 100 Amp Busbar (make-Legrand/Schneider/L&T ) |
| 375 | Supply of followingAl.PVC Armoured Cable (make-Havells/Polycab/KEI) :-120 sqmm. 3.5 core cable |
| 376 | 95 sqmm. 3.5 core cable |
| 377 | Supply of 3.5 C 35 sqmm. Al. armoured cable |
| 378 | Supply of 4 C 16 sqmm. Al. armoured cable |
| 379 | Supply of 10 Sqmm. Al. service wire |
| 380 | Cable laying on surfaceupto 25 sqmm. |
| 381 | Cable laying on surfaceupto 120 sqmm. |
| 382 | Maintenance free chemical earthing GI electrode, 80-100 micron Galvanization, IS 3043/IEEE-837, Earthing fault capacity 25 KA & Peak Fault current at 50 KA for 1 sec, 0.2%/year deviation of earthing value with respect to time, 58 mm dia of electrode, 2000 mm length of electrode, Approx 8 KG weight of electrode, crystalline conductive mixture inside filling material, 3000x25x3 mm connection strip, 10 mm terminal hole dia, Ground filling material (BFC) as per IS3043/IEEE 837, Standard chemical composition, 0.12 ohm per meter resistivity value, 1089 degree centrigrade melting temperature, 7.89 PH Value, 0.5 solubility in water, color greyor black , 10% moisture capacity at 105 degree, weight of chemical used/earthing pit 1 bag of 25 KG, 20 times water absorbing capacity and eco friendly. |
| 383 | S/L of 8 SWGcopperon surface or in recess |
| 384 | Supply, Installation,Testing and Commissioning of 40 watt, Solar PV Module 12 V 60 W-Mono-crystalline, Battery(LiFeP04) with BMS, with 2 days with dimming, MPPT Solar charge controller, 12 V, 6 A solar charge controller capacity, >93% efficiency, LED make OSRAM, 120 degree LED make, 5700 K Color temperature, > 125 lumen/watt luminous efficacy, >5000 lumen lumen output, > 50000 hours life span, inbuilt DC-DC type driver, Almn. extruded body , IP 65 Standard dust and water protection, Red LED Low-Voltage indication, Green LED Charging indication, Other Protection- 1) Over charge protection, 2) deep-discharge protection, 3) over current protection, 3) short circuit protection, 4) over voltage protection,mounting height 5 Mtr., humidity 0 to 95% range (non-condensing), -10 to 55 deg Celcius temperature range, 1230x382x55 mm Dimension, 18 Kg weight complete in all respect as per the direction of engineer in charge. (Havells/Panasonic/Philips) |
| 385 | Supply, Installation, Testing and erection of 5 mtr octagonl pole with 4 nos. foundation bolt ISI marked as per the Indian standard as per the direction of engineer in charge. |
| 386 | Construction of RCC Civil foundation and erection of pole & fixing solar street in the pole with the help of suitable machinery |
| 387 | Supply & trsnportaion ofof 11M high Octagonal GIpole is having bottom/top 240mm/100mm,3mmthick,pole in single / two section with ladder arrangement, base plate 350x350x20mm,PCD 300mm.(make- Bajaj/Consoul) |
| 388 | Supply of foundation bolts manufactured from special steel along with nuts, washers, anchor plate and common template. |
| 389 | Supply ofGI round arm bracket suitable holding 5nos flood light fixtures |
| 390 | Supply of LED floodlight 200W (make- Bajaj/Havells/Halonix) |
| 391 | Construction of shallow foundation with M20 grade concrete for the highmast considering the safe soil bearing capacity at site as 10 T/sqmtr at 1.5 metre depth with all materials and labour. |
| 392 | Erection of the octagonal pole with the help of suitable tools and plants, wiring of luminaires with all wiring materials like PVC insulated PVC sheathed flexible cable of suitable copper conductor cores of 1.5 sq. mm, lugs, MCB and all labour. |
| 393 | Provision of GI pipe earthing for High mast with 3 M long 40mm dia GI Pipe including connection to High mast earth terminal with 25 x 3 mm GI flats with all materials and labour. (2nos per mast required) |
| 394 | Supplying and laying 25mm X 5mm G.I strip on surface or in recess for connection etc as required. |
| 395 | wiring of flood light 3cx1.5sqmm2 cable (40mtr ) (Make of wire- Havells/Polycab/Finolex) & service cable 3c 4sqmm2 30mtr.With out door timer panel. |
| 396 | Supply of 4 Core 10 sqmm. Alm. Armoured cable |
| 397 | Cable laying |
| 398 | (P.H WORK)Supplying allmaterials, labour, T&P and providing and fixing to wall or ceiling and floor pvc pipes confirming to C-PVC / ASTM-D- 1785/89 (Sch-80) and pipe fittings of the following nominal borewith clamps including making good the wall , ceiling and floor, testing all complete as per specification and direction of the Engineer in charge. In Ground Floor(A)20 mm dia C-PVC Pipe |
| 399 | 25 mm dia C-PVC Pipe |
| 400 | 25 mm dia PVC ASTM(Sch.80)Pipe |
| 401 | 32 mm dia PVC ASTM(Sch.80)Pipe |
| 402 | 40 mm dia PVC ASTM(Sch.80)Pipe |
| 403 | Supplying all materials, labour, T&P and cutting holes through existing brick work including makinggood thedamagesincementmortar ( 1:4) for takingGI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge.In groundFloor - 250mmthick wall |
| 404 | Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking HCI pipes and fittings including making good the damages etc all completeas per PH specification and direction of the Engineer in charge |
| 405 | Supplying allmaterials, labour, T&P and cutting grooves in pucca floors and walls for takingGI/PVC pipes and making good the damages as per the direction of the Engineer in charge. In Ground Floor |
| 406 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials complete as per specification and direction of the Engineer in charge. (Fixtures make of Brass / G.M / C.P fittings are to be pre-approved by the E.I.C) . 15mm dia CP BIB COCK WITH WALL FLANGE.(Jaguar-FLR-CHR-5047N) |
| 407 | 15mm dia CP Long body bib cock (Jaguar-FLR-CHR-5043NMI) |
| 408 | 15mm dia CP angle stop cock (Jaguar-FLR-MCH-5053N) |
| 409 | 20mm dia CP Concealed stop cock (Jaguar-FLR-MCH-5089N) |
| 410 | 15mm dia CP two Way bib cock (Jaguar-FLR-CHR-5041N) |
| 411 | 15mm dia C.P.Hand Shower (Health Faucet) with 8mm Dia,1.2 Meter Long Flexible Tube & Wall Hook ALD CHR -573 of JAQUAR |
| 412 | 25mm dia Grass or G.M. Full way Valve |
| 413 | 32mm dia Grass or G.M. Full way Valve |
| 414 | 40mm dia Grass or G.M. Full way Valve |
| 415 | 15mm dia Extension Piece |
| 416 | 15mm dia CP Flange |
| 417 | 125mm dia. CP grating |
| 418 | 15mm dia CPPillar cock (Jaguar Make FLR-CHR-5031NG) |
| 419 | 32mm diaPVC waste pipe with brass coupling nut |
| 420 | Supplying all materials ,labour ,T&P and fitting and fixing CP shower with 15mm or 20mm inlet including polishingetc.all complete as perspecification and direction of Engineer-in-charge. 15mm CP Revolving shower with shower Arm.(Plaza/Amber/Aquatic) |
| 421 | Supplying all materials, labour, T&P and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701--1996 including cutting holes through the tank and fixing mild steel ltubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting up to a height of 5 meters above ground level and placing the tank to the required position and providing 1st class K.B.Brick work in cement mortar (1:6) of 0.46mt. height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C.slab of size 1.60mt.x1.60mt. and 0.10mt. thick, R.C.C. beam of 0.25mt.x0.30mt. and 2.60mt. average length in cement concrete (1:2:4) using 12mm size h.g.chips including centering and shuttering, watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the E.I.C. 1000 litre capacity water storage tanks (Sintax/Supremo make) In 1st Floor |
| 422 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method /as per manufacturer\"s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the engineer in charge. (A)110mm diameter U-PVC SWR pipes (Asirvad / Supreme Make) |
| 423 | 75mm diameter U-PVC SWR pipes (Asirvad / Supreme Make) |
| 424 | 110mm dia U-PVCplain Bend |
| 425 | 110mm dia U-PVCDoor bend |
| 426 | 110mm dia U-PVCDoor Tee |
| 427 | 110mm dia U-PVCDoor cross Tee |
| 428 | 110mm dia U-PVC plain Tee |
| 429 | 110mm dia socket plain |
| 430 | 110mm dia plain shoe bend |
| 431 | 110mm dia U-PVC Offset without ear |
| 432 | 110mm dia U-PVC Cowl |
| 433 | 110mm dia P-trap |
| 434 | Supplying all materials, labour, T&P and cutting by chiselling in brick masonry wall for fixing H.C.I pipes of following nominal size and fittings including making good the same with brickwork in cement mortar (1:3) including plastering etc all complete as per PH specification and direction of the Engineer in charge. |
| 435 | supplying all materials, labour, T&P and fitting and fixing 10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge.10 litres capacity PVC LL cistern (Slimline-Deluxe-white-Parryware make) |
| 436 | Half stall urinal (Hindware)No.60020 (Eureka) |
| 437 | 32mm dia CP dome waste |
| 438 | Spreader |
| 439 | Supplying all materials , labour, T&P andfixing Vitreous chinawater closet ,squattingpan ( Indian type W.C. pan / Orissa pattern squatting pan ) duly embedded in cement concrete 1:5:10 using hard granite metal 4cm nominal sizeincluding fixing a pair of vitreous china 250mmx130mmx30mm foot rest, fixing 100mm dia hci \"P\" or \"S\" trap for water closet squatting pan including jointing the trap with pan in cement mortar (1:1), cutting the floor and mending good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge.(a)580mmx440mm size Orissa pan (Hinware/Parryware or equivalent make) |
| 440 | Supplying all materials, labour, T&P and fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification and direction of the Engineer in charge.(Hinware/Parryware or equivalent make) EWC |
| 441 | Supplying all materials, labour, T&P and fixing glazed earthenware squatting plate of size 600mmx350mm with integral longitudinal flushing pipe including embedding the plate in 25mm cement mortar (1:8) laid over 150mm cement concrete (1:5:10) using 40mm hard granite metal all complete as per specification and direction of the Engineer in charge Squatting urinal |
| 442 | 100mm half round porcelain channel |
| 443 | Supplying all materials ,labour ,T&P andfixing Wash basin with hole for pillar taps with cast iron or MS brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc. fixing pedestralfor wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered \"Hot\" and \"Cold\" with long screws, shanks and back nuts of 15mm dia nominal bore, fixing15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin , fixing 12mm dia CP brass waste etc.all complete as perspecification and direction of Engineer-in-charge. 550mmx400mm size wash hand basin with Porcelain pedestal(Parryware/Hindware/ Somany/Cera) |
| 444 | Supplying all materials ,labour ,T&P and fixing wash laboratory sinkwith outlet at end and weir overflow including fitting and fixing a pair of cast iron or MS brackets painted white, fixing 50mm/40mm dia CPbrass waste , fixing 50mm/40mm dia PVC waste pipe 910mm long with supply of wooden plugs, screws and cement etc. including cutting holes in walls and making good the damages etc.all complete as perspecification and direction of Engineer-in-charge.600mmx450mmx250mm size porcelain Sink |
| 445 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted minimum 5m thick on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the Engineer in charge.Mirror of best quality of 2100mmx600mm 600mmx450mm size B.E mirror |
| 446 | Supplying all materials,labour, T&P and fixing standard sized CP towel rail complete withCP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge.CP Towel ring |
| 447 | 600mmx125mm glass shelf with CP/NP guard rails |
| 448 | Fixing 25mmx600mm long CP towel rail |
| 449 | Supplying all materials ,labour ,T&P andfixing CP Soap Holder complete with CP brass bracketsfixed to wooden plugs with chromium plated brass screws etc.all complete as perspecification and direction of Engineer-in-charge. CP soap holder |
| 450 | Supplying all materials,labour,T&P and cleaning and polishing seat and lead of water closet including fitting as per direction of the Engineer in charge. |
| 451 | Supplying all materials,labour,T&P and cleaning and washing glazed urinal channel with acid as per direction of the Engineer in charge. |
| 452 | Supplying all materials,labour,T&P and cleaning and washing water closet, urinal plates and porcelain cisterns etc with acid as per direction of the Engineer in charge. |
| 453 | Supplying all materials, labour, T&P and cleaning and washing glazed tile surface with acid including polishing as per direction of the Engineer in charge. |
| 454 | Dismantling and removing cement concrete including stacking the useful materials for reuse and removing the debris within 50 m lead etc all complete as per specification and direction of the Engineer in charge. |
| 455 | Dismantling and removing cement concrete including stacking the useful materials for reuse and removing the debris within 50 m lead etc all complete as per specification and direction of the Engineer in charge. |
| 456 | Dismantling and removing old tiled cladding from walls including racking out joints 12mm deep, stacking the useful materials for reuse and removing the debris within 50 m lead etc all complete as per specification and direction of the Engineer in charge |
| 457 | Dismantling and removing old tiled flooring including removing the old base and stacking the useful materials for reuse and removing the debris within 50 m lead etc all complete as per specification and direction of the Engineer in charge . |
| 458 | Dismantling and removing old lime or cement plaster from walls including racking out joints 12mm deep and removing the debris within 50 m lead etc all complete as per specification and direction of the Engineer in charge. |
| 459 | Dismantling and removing doors, windows and ventilators including removal of frame, hinges, fastening and stacking of the useful materials for reuse and removing the debris within 50 m lead etc all complete as per specification and direction of the Engineer in charg |
| 460 | Supplying all materials,labour,T&P and dismantling thedamaged squatting type water closet and urinal plates etc and mending good the damages to the floors and removing the debris at a safe distance as per direction of the Engineer in chargepayment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 461 | Supplying all materials, labour, T&P and dismantling HCI pipes and fittings as per direction of the Engineer in charge.100mm dia HCI pipes and fittings |
| 462 | Supplying all materials, labour, T&P andDamaged EWC, AIWC, basin, cistern pipes and fittings as per direction of the Engineer in charge.100mm dia HCI pipes and fittings |
| 463 | Supplying Un-Skilled labour for disposing of dismantled materials at a suitable place etc.all complete as per direction of the Engineer-in-charge.Un-skilled labour |
| 464 | Supplying all materials,labour,T&P and dismantling thedamaged hand wash basin removing the debris at a safe distance as per direction of the Engineer in chargepayment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 465 | Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge. |
| 466 | Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size crusher broken hard black granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge.(a) Groundfloor |
| 467 | Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,paymentof royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. G.F |
| 468 | Supplying all materials, labour, T&P and providing and fixing of porcelain glazed tiles in dado skirtingon 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tilesincludingwatering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge.Glazed tile 45cmx30cm Kajaria/Somany/Johnson premium or equivalent. G. Floor |
| 469 | Glazed tile 60cmx30cm Kajaria/Somany/Johnson premium or equivalent. G. Floor |
| 470 | Supplying all materials, labour, T&P and providing and fixing of porcelain tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tilesincludingwatering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge .Ceramic tile Kajaria(400x400mm)Fog parla (GF) |
| 471 | Supplying all materials, labour, T&P and providing Granite slab urinal partition wall including cutting grooves in wall and making good the damages including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge ,(20mm thick) |
| 472 | Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge.IN G.F |
| 473 | Supplying all materials, labour, T&P and providing 6mm thick cement plaster (1:4) to RCC surfaces finished smooth including closed deep chipping and slurry tratment including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge. |
| 474 | Finishing wall surface of walls with Acrylic wall putty (Water based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete. |
| 475 | Supplying all materials, labour, T&P and providing cement washing 2 coats including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge. |
| 476 | Supplying all materials, labour, T&P and distempering two coats to walls with distemper of approved shade on new work to give an even shade etc all complete as per specification and direction of the Engineer in charge. |
| 477 | Supplying and fitting-fixing of Un-plasticised Poly Vinyl Chloride (UPVC) (FENESTA / NCL VEKA LTD) Casement ToiletDoor – 60- Series duly manufactured using UPVC reinforced profiles of 60 mm x 55 mmx2.5 mm for outer frames, 102 mm x 60 mm x 2.25 mm for casement Door Sash Profile and 74 mm x 60 mm x 2.5mm mullion profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 2.0 mm prefabricated & welded through fusion welding.The Door sash shall be fitted with 12mm thick WPC Board of Greenply make duly fixed with EPDM weathering seal resistantaccessories like Bathroom locking system made of aluminium 1 No., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges. The materials and product confirming to ASTM D 638-14, EN-477-95 and other applicable codes and standards. |
| 478 | External:- Supplying all materials, labour, T&P and constructing inspection chamber of the following sizewith cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6),moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge( Inspection chamber Inside size 760mmx760mmx 460mm |
| 479 | Supplying all materials, labour, T&P and constructing man hole chamber of the following sizewith cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class K.B brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge. |
| 480 | Supplying all materials, labour, T&P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, K.B brickwork in c.m (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat ofneat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size C.I grating etc all complete as per approved drawing, specification and direction of the Engineer in charge |
| 481 | Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and 1st class K.B brickwork in cement mortar (1:6) for the remaining height at top, cement concrete (1:4:8) using 40mm size hg chips on bed, 12mm thick cement plaster (1:4) inside and outside over masonry brickwork, gravel backing in the rear of well steining, RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge . Brick masonry soakway pit 1.80 m dia x 2.60m deep |
| 482 | Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasingincluding concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge.110mm dia u-pvc pipe alround concrete |
| 483 | 50 UserRCC Septic tank- (1 No For O.G Ward)Earthwork in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to minimum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of the Engineer in charge. Initial lift |
| 484 | ……… do ………. with 1st extra lift of 1.50m(1 x 6.80 x 2.74 x 1= |
| 485 | Supplying all materials, labour, T&P and providing shoring and shuttering foundation trenches, pits etc with close wooden planks or sheets shuttering etc all complete as per direction of the Engineer in charge. |
| 486 | Supplying all materials, labour, T&P and filling in foundaton and plinth with sand well watered and rammed including conveyeance of all materials to worksite,payment of royalty, taxes etc all complete as per direction of the Engineer in charge. |
| 487 | Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in chargeIn ground floor |
| 488 | Supplying all materials, labour, T&P and providing cement concrete (1:1.5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge.In ground floor |
| 489 | Supplying all materials, labour, T&P and providing M.Sreinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in chargeIn ground floor |
| 490 | Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling then after casting including cost of materials complete in ground floor. |
| 491 | R.C.C floor and roof slabs, landings, balconies, projecting sunshades and chajjas up to4.30m height |
| 492 | Supplying all materials, labour, T&P and providing 6mm thick cement plaster (1:4) on RCC work including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in chargeIn ground floor (inside) |
| 493 | Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) including watering,curring and conveyance of all materials to site. |
| 494 | Supplying all materials, labour, T&P and providing cement punning including watering, curring and conveyance of all materials to site. |
| 495 | Supplying all materials, labour, T&P and futting and fixing 20mm dia MS/CI step iron including supply of necessary C.C(1:2:4) for fixing etc complete as per P.H.D. specification. |
| 496 | Supplying all materials, labour, T&P and fitting and fixing S.W.Tee of size 150mx150mx150m as per P.H.D.specification and direction of the E.I.C. |
| 497 | Supplying all materials, labour, T&P and constructing vent base as per P.H.D specification etc all complete. |
| 498 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer\"s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the engineer in charge. 110mm diameter U-PVC SWR pipes(Supreme/Ashirvad) |
| 499 | 110mm U-PVC cowl |
| 500 | Supplying allmaterials, labour, T&P for removingthe excavated earthby mechanical meansetc . |
| 501 | Construction of 30user Septic Tank-1 no for Dairrohea ward:- Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of theEngineer-in-Charge. |
| 502 | Extra lifts of 1.50 mtr or part thereof over the initial lift of 1.5 mtr in all kinds of embankments and road works and ordinary earthwork in general. |
| 503 | Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including cost,conveyance of all material to work site payment ofroyalty,taxes etc all complete as per the direction of Engineer-in-Charge.1*4.09*2.09*0.20= |
| 504 | Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 505 | Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12m size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 506 | Supplying all materials, labour, T&P and providing brick work with FA bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:6) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge.G.F |
| 507 | Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 508 | Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials toworksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 509 | Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 510 | Supplying all materials, labour, T&P and providing M.Sreinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 511 | Supplying all materials, labour, T&P and providing cement concrete (1:1.5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 512 | Supplying all materials, labour, T&P and providing,fitting and fixing 100mm x 100mm x 100mm SW Tee in wall including filling the recess with cement concrete (1:3:6) with 12mm size h.g chips all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification anddirection of the Engineer in charge |
| 513 | Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls ofman hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge. |
| 514 | Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge |
| 515 | Cost of washed gravel |
| 516 | Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) PRO THERMAPURE 120 PSSRO ACH of size 750x720x1440mm height with water storage capacity 120 liters along with 3 nos of faucets 1 for Hot water,1 for cold water and 1 for normal wateretc all completeas per approved drawing,specification and direction of the Engineer in charge. |
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail