Public Works Department-PWD has published Tender For Construction Of New Model Anganwadi Centre At Amini (Nand Ghar). Submission Date for this Tender is 15-04-2023. Building Work Tenders in amini Lakshadweep. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Surface dressing of the ground including removing vegetation and inequalitiesnot exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil |
| 2 | Earth work excavation in foundation trenches or drains not exceeding 1.5m in width or 10 sq.m on plan including dressing of sides and ramming of bottoms, lift up to 1.5m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m. |
| 3 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc layers not exceeding 20cm plinth, sides of foundations etc layers not exceeding 20cm and watering lead up to 50 mtr and lift up to 1.5 |
| 4 | Felling trees of girth (measured at a hight of 1mtr above ground level) including cutting of trunks and branches removing the roots and stacking of servicable materials and disposal of unservicable materials . |
| 5 | Beyond 30 cms and upto 60 cm in girth |
| 6 | Beyond 60 cms and upto 120 cm in girth |
| 7 | Beyond 120 cms and upto 240 cm in girth |
| 8 | Providing and laying cement concrete 1:4:8 (1 cement 4 M-sand 8 granit chips) excluding the cost of centering and shuttering and reinforcement for foundation and plinth |
| 9 | Providing and laying cement concrete 1:5:10 (1 cement 5 M-sand 10 granit chips) excluding the cost of centering and shuttering and reinforcement for foundation and plinth |
| 10 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources) for ramp. |
| 11 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources) |
| 12 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 M- sand, 3 granite chips 20 mm nominal size) a) foundation and plinth |
| 13 | Reinforced cement concrete work in beams, suspended floors, roofs havingslope up to 15 degree landings, shelves chajjas, lintel bands plain window sills staircase and spiral staircase up to floor five level excluding cost of centring,shuttering and reinforcement 1:1.5:3 (1 cement 1.5 M Sand3 granite chipps 20mm nominal size) |
| 14 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement :1:1:2 (1 cement: 1 coarse sand : 2 graded stone aggregate 20 mm nominal size) |
| 15 | Providing and fixing precast cement concrete 1:1.5:3 (1 cement : 1.5 M-sand : 3 graded stone aggregate 20mm nominal size) sety in position with cement mortar 1:2 (1 cement, 2 corse sand) and finished smooth with 6mm thick cement plaster 1:3 (1 Cement : 3 fine sand) on exposed surface includig centering and shuttering. |
| 16 | Centering and shuttering including strutting propping etc and removal of form work |
| 17 | Foundation, footings, bases for columns |
| 18 | Lintel and beam grider, bressummers, cantilivers |
| 19 | Column, piller, piers and abutments |
| 20 | Suspended floor, roofs, landings, balconies and acess platform. |
| 21 | Providing plaster drip course/ groove in plastered surface or modular to RCC projection |
| 22 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Thermo-Mechanically Treated bars of grade Fe-500D or more. With provision for fusion bounded epoxy coating by mechanised and qualified process including cleaning the surface, heating by iduction heater, electrotatically spraying the epoxy powder, complete fusion to give a coating thickness of 150 to 300 microns gradual cooling without affectiing the properties of steel, testing as per ISI 13260/ ASTMA 775, flexibility/ bend tests etc. and other test for ASTM standard. |
| 23 | Providing and laying factory made Precast concrete solid blocks of size 40x20x15 cm of grade M10 made of C&D waste from approved manufacturer in foundation and plinth with Cement mortar 1:6 (1 cement : 6 M-sand) |
| 24 | Providing and laying factory made Precast concrete solid blocks of size 40x20x15 cm of grade M10 made of C&D waste from approved manufacturer in superstructure above plinth level up to floor V level with Cement mortar 1:6 (1 cement : 6 M-sand) |
| 25 | Providing and laying half block masonry with factory made Precast concrete solid blocks of 40x20x10 cm of grade M10 made of C&D waste from approved manufacturer in superstructure above plinth level up to floor V level withCement mortar 1:4 (1 cement : 4 coarse sand) |
| 26 | Providing wood work in frames of doors, windows, clerestory windows and other frames wrought, framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or dasg fastener shall be paid for separately) - Second Class Teak ood |
| 27 | Providing and fixing 30 mm thick panelled, glazed or panelled and glazed shutters for doors windows and clerestory windows fixing with butt hinges of required size with necessary screws excluding panelling which will be paid for separately, all complete as per direction of Engineer in charge (Butt hinges and necessary screws shall be paid separately) SecondClass Teak Wood |
| 28 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : 4mm thick float glass panes |
| 29 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. |
| 30 | Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. |
| 31 | Providing and fixing to existing door frames. 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames. |
| 32 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak three ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 33 | Providing 40 x5 mm Iron hold fast 40 cm long including fixing to frames with 10 mm dia bolts nuts , wooden plugs and embedding in cement concrete block of size 30 x10 x15 cm of mix 1:3:6 ( 1 cement : 3 river sand : 6 graded stone agrigate of 20 mm nominal size) |
| 34 | Providing and fixing Bright finished brass door latch with necessary screws etc complete. 300x16x5 mm |
| 35 | Providing and fixing Bright finished brass casement stays (stright peg type) with necessary screws etc complete. 250 mm weighing not less than 280 gms |
| 36 | Providing and fixing Bright finished brass tower bolt (barral type) with necessarysscrews etc complete. 250x10mm |
| 37 | 100x10mm |
| 38 | Providing and fixing Bright finished brass handle with necessarys screws etc complete. 125 mm |
| 39 | 100 mm |
| 40 | Providing and fixing nickel plated M.S pipe curtain rods with nickel plated brackets 20mm dia (Heavy duty) |
| 41 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 42 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. complete. Size of Tile 600 x 1200 mm |
| 43 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600 x 1200 mm |
| 44 | Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. |
| 45 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete. |
| 46 | Providing and laying rectified Glazed Ceramic floor tiles of size 1200x600 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete. |
| 47 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble. Area of slab upto 0.50 sqm |
| 48 | Extra for providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Marble work |
| 49 | 6mm cement plaster 1:3 (1cement :3 metal sand) |
| 50 | 12mm cement plaster of mix 1:6 (1cement :6 metal sand) |
| 51 | 15mm cement plaster 1:6 (1cement :6 metal sand) |
| 52 | 15mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:3 (1cement : 3 metal sand) |
| 53 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre(Birla/ Nerolac or equivalent). |
| 54 | Providing and applying wall putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete. (Birla/ Nerolac or equivalent) |
| 55 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coat (Birla/ Nerolac or equivalent) |
| 56 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) (Birla/ Nerolac or equivalent) |
| 57 | Painting Wood work with Deluxe Multi surface paintto give an even shade.Two or more coats applied on @0.90ltr/10 sqm) over under coat of primer applied @ 0.75 ltr/10 sqm of approved and manufacture |
| 58 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture |
| 59 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittingsi/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes &fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,) |
| 60 | 20 mm nominal bore |
| 61 | 32 mm nominal bore |
| 62 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. (External work). |
| 63 | 20 mm nominal bore |
| 64 | 32 mm nominal bore |
| 65 | Providing and fixing C.P. Brass bib cock of approved quality and manufacture complete. 15 mm nominal bore |
| 66 | Providing and fixing C.P. Brass stop cock of approved quality and manufacture complete. 15 mm nominal bore |
| 67 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore |
| 68 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 1000 liter capacity |
| 69 | Providing and fixing nominal guage PVC Pipe of approved quality compleate with special flang compression type fittings including trenching and re filling etc. External work. 110 mm nominal bore |
| 70 | 63 mm nominal bore |
| 71 | Providing anf fixing white vitrous China water closet Pedestal pan (European) type WC pans with white plastic seat and lid and rubber buffers, 15 white vitrous China low level flushing system of approved make with fittings and brackets 40mm flush bend, 20mm over flow pipe with complete including cutting and making good the walls and floors where required. White EWC pan with plastic seat and lid (Jaquar or equivalent) (Model No. SLS- WHT-0311/ SLS-WHT-0318) or Model No CNS-WHT-363SPPZ |
| 72 | Providing anf fixing white vitrous China wash basin with RS or CI brackets painted white, 15mm C.P bras pillar tap and C.P brass chain and rubber plug 32mm C,P. brass waste of standrad pattern 32mm diametre and waste pipe complete including cutting and making good the walls and floors where required. White vitreous China Flat back wash basin 550x400mm with one 15mm C.P. brass pillar tap. (Jaquar or equivalent) (Model No. FNS- WHT-0606/ FNS-WHT-1503/FLS- WHT-0606) |
| 73 | Providing anf fixing mirror of superior glass (approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing (Jaquar or quivalent) Mirror size 700x500mm. |
| 74 | Providing and fixing health faucet (hand shower) 15mm dia (Jaquar or quivalent) |
| 75 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. |
| 76 | Providing and Fixing PTMT liquid soap container109 mm wide,125 mm high and 112 mm distance from wall of standard shape with brackets of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms |
| 77 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931. 15mm nominal bore |
| 78 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board:- 510x1040 mm bowl depth 250 mm |
| 79 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 80 | Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. |
| 81 | Providing material and labour for painting artistick work as approved by Engineer in charge with synthetic enamel paint of approved brand and manufacture of required colour on wall surface etc. complete |
| 82 | Wiring of light point/ fan point exhuast fan point/ call bell point with 1.50 sq. mm FR PVC insulated copper conducted single core cable in surface/ recessed medium class PVC conduct/ casing caping with piano type switch, phelonlic laminated sheet suitable size MS bars and earthing the point with 1.50 sq.mm FR PVC insulated copper counductor single core cable etc. as required group A. |
| 83 | Point wiring for looped PLUG with tissino type single pole ISI marked 6A. Switch and 6A socket errected with necessary connections errected on polished wooden block/ Metal/ PVC box covered with 3mm thick lamination sheet for open/ concealed wiring. |
| 84 | Wiring circuit/ submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductors, single cover cable in surface/ recessed medium class PVC conduit as required 2X2.5 sq.mm +1X2.50 sq.mm earth wire. |
| 85 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductors, single core cable in surface/ recessed medium class PVC conduit as required 2X4 sqm.mm earth wire. |
| 86 | 6 amps to 32 amps ratings, SP MCB. "C" curve, 10 KA breaking capacity. |
| 87 | Providing and ererrcting , Three pole MCB isolator AC 22 duty confirms to IS 13947.3 in existing box (a) for 40 Amp Cat. III |
| 88 | Providing and errecting sheet steel powder coated MCB distribution board, flush/ surface mounted fitted with busbar, neutral link, earth bar and DIN rail, confirming to IS 13032 and BS 5486:1986 without MCB to house approprire nos. of MCB"s (The DBs should be used for same company of MCB to be used) (F) Single phase 8 way SS double door. |
| 89 | Earthing with copper earth plate 600mmX600mmX3mm thick including accessories and providing masionary enclosure with cover plate having locking arrangement and watering pipe of 2.70 meter long etc. with charcaol/ coke and salt as required. |
| 90 | Supply of One No SP 16Aswitch & One No. 6/16 A Universal socket combined with indicator & Fuse. |
| 91 | Providing and errecting approved make ceiling fan with double ball bearing ISI mark with condensor AC 230V 50 c/s 1200mm sweep complete canopy and 30 cm, down rod errected on existiing hook or clamp with 24/0.20, 3 core flexible wire with earthing (make shall be approved by Engineer in charge) |
| 92 | Providing and errecting fresh air fan 250mm dia with square frame make ABS body with louvers Cat.III |
| 93 | Providing and errecting decorative box type with plastic/ polyster cove fluresent fitting with electronic ballest finished with anti rust threaded white stove enamelled with end plates and holders with errection on site with lead wire and connection with 1 tube 40 Watt 120 cm and adapter if required. |
| 94 | Supplying and errecting LED street light/ fled light fittings with high power white LED"s wattage of 1 watt and above assembled on single MCPCB, efficiency 130 m/w and corrosion free high pressure die cast aluminium housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and polycarbonate optics/ lenses with company mark/ name encrave or embosees 120 to 300 V power factor more than 0.95, THD less than 10% CCT 5000K uniformity ration greater than 0.45, Luminaire efficiency greater than 85 CREE/ OSRAM/ Philips lumileds/ NICHIA/ SEOUL/ Bridge Lux (USA) make LED used for luminaire (each fittings required LM 79M and LM 80 certificates) (A) Street light (IP-65) surge-4KV (e) above 48 to 60 Watt |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
