Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 11-04-2023 | 2nd Corrigendum | Other | 13-04-2023 |
| 2 | 09-04-2023 | 1st Corrigendum | Other | 13-04-2023 |
| Sl. No. | Item Description |
| 1 | Civil WorkDismantling G.C.I. Or A.C. sheet roofing after carefully removing the bolts and nuts including stacking of the materials for reuse adn removing the debris within 50M lead. |
| 2 | Dismantling and removing doors, windows and ventilators including removal of frame, hinges, fastening and stacking the same for re-use and removing the debris within 50M lead. |
| 3 | Dismantling brick or stone masonry in lime or cement mortar above 3M height including stacking the useful materials for reuse and removing the debris within 50M lead per 1 Cum |
| 4 | Dismantling & removing old tiled flooring including removing the base coarse and stacking the useful materials for reuse and removing the debris within 50M lead. |
| 5 | Dismantling & removing old tile cladding from walls including racking out joints 12mm deep stacking the useful materials for reuse and removing the debris within 50M lead. |
| 6 | Removing old lime or cement plaster from walls including raking out joints 12mm deep and removing the debris within 50M lead.and as per direction of Engineer-in- Charge |
| 7 | Removing debris from work site by mechanical within 5km lead etc all complete. |
| 8 | Earthwork in excavation in alltypes of soil for site leveling, foundation, pits, trenchesand other civil works up to and including 1.5 metre lift and stacking the soil upto a lead of 100 metre and including dewatering, removing slush,shoring and strutting (as required), complete as per specification and as directed by the Engineer-In-Charge. |
| 9 | Filling at all depth with available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 15 cm in depth : consolidating each deposited layer by ramming and watering complete (lead upto 100m) as directed by the Engineer-In-charge. |
| 10 | Supplying offilling sand in foundation and over areas including watering, ramming, consolidating and dressing, labours, tools, taxes etc. all complete as per the specification and direction of Engineer-In-charge. |
| 11 | Providing and laying plain cementconcrete 1:3:6 (1 cement: 3 sand: 6 stoneaggregate 40mmnominal size) as levelling course in foundation and plinth etc. includingtempering, curring, shuttering etc. complete all depth and height. |
| 12 | Providing and laying plain cementconcrete 1:4:8 (1 cement: 4 sand: 8 stoneaggregate 40mmnominal size) as levelling course in foundation and plinth etc. includingtempering, curring, shuttering etc. complete all depth and height. |
| 13 | Brick work with Fly ash Bricks in cement mortar (1:6) in Foundation & Plinth having crushing strength not less than 75.00 kg/cm2 immerging the bricks in water not less than six hours before use in masonary. |
| 14 | Providing and laying 600 mm x 600 mm Vitrified Floor Tiles confirming to IS : 15622 of approved make, quality and colour without any warpage laid over an under layer of 20 mm thick base of cement mortar (1:4) (1 cement: 4 coarse sand)including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces with oxlaic acid, machine grinding, mirror polishing including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading,sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge.(Note- Sample of tiles shall be approved before procurement and use. |
| 15 | Supplying fitting and fixing Vitrified Tile on Dado/ skirting on 12mm thick cement plaster etc all complete. |
| 16 | Supplying, fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @0.90mtr. C/C and stainless square pipe barracking of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect. |
| 17 | Brick work with Fly Ash Bricks in cement mortar (1:6) in superstructure having crushing strength not less than 75.00 kg/cm2 immerging the bricks in water not less than six hours before use in masonary . |
| 18 | Providing, lifting, hoisting and laying Reinforced cement concrete of M-200 grade as per approved designs and drawings having a minimum compressive strength (in work test) 250 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed andcleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portlandslag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position.a) Column Base & Footing |
| 19 | a) Plinth beam :- |
| 20 | b) Beam & Column |
| 21 | c) Lintel Beam |
| 22 | d) Roof Slab / Cover Slab |
| 23 | Supplying, straightening, cutting, bending, placing in position and binding reinforcement steel work in RCC/reinforced brick works as per drawing and specification including preparation of respective bar bending schedule and binding (Bindingwire to be used as per the IS code) etc. all complete as per direction of Engineer-In-charge. Cold Twisted bars, Thermo-Mechanically-treated bars. |
| 24 | 12mm (½”) thick cement plaster (1:6) finished smooth to outside smooth surface of brick walls after raking out the joint including watering and curing with cost, conveyance, royalties and taxes of all materials with all labour and T&P required for the work etc. complete in all respect. |
| 25 | 16mm (5/8”) thick cement plaster (1:6) finished smooth to inside roughsurface of9”/10” thick brick walls after raking out the joints including watering and curing with cost with cost, conveyance, royalties and taxes of all materials with all labour, T&P required for the work etc. complete. |
| 26 | providing neat cement punning on plaster surface including all material labour complete. |
| 27 | Finishing wall surface of walls with cement based wall putty (water based) of approved make and finished smooth and even surface to receive painting including cost of scaffodling staging charges with cost of all materials, taxes, labour, T&P etc. complete. |
| 28 | Priming one coat to wall surface with water bound cement primer including cost, conveyance, taxes of all materials, labour and T&P etc. complete |
| 29 | Wall painting two coats with plastic emulsion paint of approved shade on old work including cost of paint. |
| 30 | Painting two coats with distemper over a coat of primer to inside wall srface etc all complete. |
| 31 | Painting two coats with weather seal coat paint over a coat of primer to out side wall srface etc all complete. |
| 32 | Painting two coats with any approved enamal painting to wood & iron works over a coat of primer including cost of all charges e.t.c. all complete. |
| 33 | Finishing wall surface of walls with acrylic wall putty (water based) of approved make and finished smooth and even surface to receive painting including cost of scaffodling staging charges with cost of all materials, taxes, labour, T&P etc. complete. |
| 34 | Painting two coats with Plastic emulsion paint over a coat of primer to inside wall surfaceetc all complete. |
| 35 | Dressed seasoned sal wood work framed and fixed (W & P) in trusses purlins frame of doors, windows and door etc.Data for 0.028 Cum |
| 36 | Providing and fixing 35 mm thick Double Leaf Flush Door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters , teak wood lipping around the edges & paste with 1mm thick laminate on both side of the flush doorinclussive of SS 304 Grade 8 No’s Butt Hinges (125mm x 67mm x 2.5mm), 2 No door closer (40 - 80Kg), 2 Pair of D type Pull Handle (200mm x20 mm), 1 No Aldrop (300mm x 16mm),2 nosDoor Stopper , 2 No tower Bolt (300mm x10 mm), and 2 No PVC Buffer with SS Screw etc including the cost of all materials, hardware fittings, cost of all labour, conveyance,loading, unloading, T&P, etc, complete as per the direction of Engineer-in-Charge.(Make: Flush Door: Greenply/Century/Merino, Laminate: Greenply/Century/Merino Hardware Fittings: Godrej/Dorset/Link/Dorma & Colour: Coffee Brown Mica) |
| 37 | Supplying & fitting fixing of un- plasticised poly vinyl chloride (UPVC) (FENESTA/NCL VEKA LTD) casement door-60 series dully manufactured using UPVC reinforce profile of 60mmx55mmx2.5mm for cashment door sash profile and 74mmx60mmx2.5mm mullion profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5mm and product conforming to ASTM D 638-14 EN-477-95 and Other applicable code and standards including multi lock and rollers & proper drainage system shall be provided. window frame will be fixed to the wall with 100mm long and 8mm dia.Fasteners and after fixing the gap between frame and adjucent finished wall shall be filled with weather proof silicon sealant over backer rod of required size, of approved quality complete in all respect as per approved drawing & direction of the Engineer -In-Charge. Note:- Profile Manufacturer & Door/Window manufacturer, installation of windows must be done through Manufacturing company, and then only Manufacturer warranty is acceptable) |
| 38 | Supplying & fitting fixing of un- plasticised poly vinyl chloride (UPVC) (FENESTA/NCL VEKA LTD) casement door-60 series dully manufactured using UPVC reinforce profile of 60mmx55mmx2.5mm for cashment door sash profile and 74mmx60mmx2.5mm mullion profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5mm and product conforming to ASTM D 638-14 EN-477-95 and Other applicable code and standards including multi lock and rollers & proper drainage system shall be provided. window frame will be fixed to the wall with 100mm long and 8mm dia.Fasteners and after fixing the gap between frame and adjucent finished wall shall be filled with weather proof silicon sealant over backer rod of required size, of approved quality complete in all respect as per approved drawing & direction of the Engineer -In-Charge. Note:- Profile Manufacturer & Door/Window manufacturer, installation of windows must be done through Manufacturing company, and then only Manufacturer warranty is acceptable) |
| 39 | Supplying fitting and fixing Vitrified Industrial floor tile on 20mm thick bed of cement mortar (1:4) jointed with neat cement slurry etc all complete. |
| 40 | Providing and fixing M.S grill & Angle Gate of required patterns for Ventilator & RoomShutter etc. with M.S flats, square or round bars etc. including applying a coat of approved steel primer and two or more coats of synthetic enamel paint of approved make & shade, all complete as per drawing & specification. (Allsteel sections contractor\"s own supply). |
| 41 | Providing, fitting and fixing of Armstrong accoustical fine fissured RH-99 board 0.55 sound attention 34db suspended ceiling with Armstrong fine fissured tiles with cost of all charges etc all complete.andas per the instruction of Engineer-in-Charge. |
| 42 | Providing and fixing M.S Truss & Roof frame of required patterns for sheding etc. with M.Ssquare or round bars etc. including applying a coat of approved steel primer and two or more coats of synthetic enamel paint of approved make & shade, all complete as per drawing & specification. (Allsteel sections contractor\"s own supply). |
| 43 | Providing P.C.C. (1:2:4) using 12mm size cbhg chips etc all complete. |
| 44 | Supplying fitting and fixing of durashine colour sheet in roof including cost of all charges etc all complete. |
| 45 | Supplying, fitting & fixing of Durashine Colour Coated Plain ridge including cost of all charges e.t.c. all complete. |
| 46 | Dismantling and removing 2.5cm thick grading concrete from roof slab cleaning the surface lowering and removing debris within 50M lead. |
| 47 | Dismantling and removing RCC chajja, shelves, fins and parapet including stacking the useful materials for reuseand removing the debris within 50M lead. |
| 48 | Providing 4cm thick grading concrete (1:2:4) on roof slab with 12mm & down graded chips including all cost etc all complete. |
| 49 | Providing drip course/ groove in plastered surface or moulding to R.C.C. projections including cost of all materials, conveyance, royalties, all labour, scaffolding, watering and curing, sundries and T&P etc. complete as per direction of the Engineer-in-charge. |
| 50 | ELECTRICAL WORKSub-Head I (modular Wiring Items)Recessed wirring tolight point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLSH/LSZHPVC insulated copper conductor of ISI markedMake- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI or equievalant reputed makeA catagory ISI marked as approved with 20 mm dia PVC flexible non metallic conduit FRLS , HMS type ISI markedMake-AKG/Anchor/Havells or equievalant reputed make A catagory ISI marked as approved 6A modular type (anti bactorial & flame retradant type)switch ISI marked Make-Schneider/legrand( Arteor) /Panasonic (vision) or equievalant reputed make & model A catagory ISI marked as approved, and ceiling rose ISI marked Make- Anchor/Havells of modular type G.I box with metallic cover plate (both side) (anti bactorial & falme retradant type) Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision)or equievalant reputed make & model A catagory ISI marked as approvedof suitable size, modular box with 1.5 sq. Mm FRLSHPVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. GROUP-A |
| 51 | GROUP-B |
| 52 | GROUP-C |
| 53 | Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type)( (anti bactorial & flame retradant type)) & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision) or equievalant reputed make & model A catagory ISI marked as approved, complete suitable for IPH standard hospital. (Maximum 02 nos point in one circuit). All the switches & sockets should be warrantied for a replacement period of 10 yearsagainstdefects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 54 | Supplying,fixing of 6A Plug on the separate board with complete fitting by 01 no of 6A switch & socket(modular type)( (anti bactorial & flame retradant type))with suitable size modular box & cover(anti bactorial & falme retradant type) including supplying of all requiredaccessoriesof ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision) or equievalant make & model ISI marked as approved , complete suitable for IPH standard hospital.(Maximum 02 nos point in one circuit). |
| 55 | Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch & socket(modular type)((anti bactorial & flame retradant type))with suitable size modular box & cover(anti bactorial & falme retradant type) including supplying of all requiredaccessoriesof ISI marked as approved as per direction of engg-in-charge.. Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision)or equievalant reputed make A catagory ISI marked as approved, (For equipement power) (fOR AC, water filter etc. connections) |
| 56 | Supplying,fixing of 2x6A+1X16A Plug on the separate board with complete fitting by 01 no of 16A+2 no 6Aswitch & socket(modular type) ( (anti bactorial & flame retradant type) with suitable size modular box & metallic cover plate (both side)(anti bactorial & falme retradant type)including supplying of all requiredaccessoriesof ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision)or equievalant reputed make & model A catagory ISI marked as approved, (for Office Computer & Printer system) |
| 57 | Supplying,fixing of 3x6A+1X16A Plug on the separate board with complete fitting by 01 no of 16A+3 nos6Aswitch & socket(modular type) ( (anti bactorial & flame retradant type) with suitable size modular box & metallic cover plate (both side)(anti bactorial & falme retradant type)including supplying of all requiredaccessoriesof ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision)or equievalant reputed make & model A catagory ISI marked as approved, |
| 58 | Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLSH/LSZHinsulated, copper conductor, single core cable (Finolex/Polycab/ HAVELLS/RR KEBLE) or equievalant reputed make A catagory ISI marked as approved, inrecessed PVC conduit Heavy duty FRLS, HMStype of mentioned size (AKG/Anchor/Kinjal or equievalantISI marked as approved) as required as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallicheavy duty flexible conduit (LDB to LSB/LIGHT CKT)(2X1.5+1X1.5) |
| 59 | 2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallicheavy duty flexible conduit.(BDB to LSB/LIGHT CKT/5A PLUG/INVERTER POINT TO EACH QTR) (2X2.5+1X1.5) |
| 60 | 4 nos single core 2.5 sq. mm copper wire for phase and neutral and 02 nos of single core 2.5 sq. mm copper wire for earth continuty conductor .in 25 mm dia non metallicheavy duty flexible conduit(LDB to LSB/5A SOCKET) (4X2.5+2X2.5) |
| 61 | 2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallicheavy duty flexible conduit .(PDB to PSB/ GAYSER POINT/AC POINT/ROOM LIGHT CONTROL TO CORRIDOORPOINT/DG PANELESSENTIAL LOAD) (2X4+1X1.5) |
| 62 | 4 nos single core 4 sq. mm copper wire for phase and neutral and 02 nos of single core 2.5 sq. mm copper wire for earth continuty conductor in 32 mm dia non metallicheavy duty flexible conduit.(PDB to PSB/GAYSER. POINT/AC POINT/DG PANEL ACCL TO EACH QTRESSENTIAL LOAD) (4X4+2X2.5) |
| 63 | 4 nos single core 6 sq. mm copper wire for phase and neutral and 02 nos of single core 2.5 sq. mm copper wire for earth continuty conductor in 32mm dia non metallicheavy duty flexible conduit.(LFDB TO LBDB/power unit/point) (4X6+2X2.5) |
| 64 | 4 nos single core 10 sq. mm copper wire for phase and neutral and 02 nos of single core 4 sq. mm copper wire for earth continuty conductorin 32 mm dia non metallicheavy duty flexible conduit .(LFDB TO FLOOR PANEL TO TPN BDB light ) (4X10+2X4) |
| 65 | Supplying and fixing following size/ modules, GI box along with modular base & metallic cover plate (both side)(anti bactorial type) plate for modular switches in recess etc as required as per direction of Engg.-in-Charge. MAKE-Legrand/Siemens/Panasonic/ Schneider or equievalant reputed make & model A catagory ISI marked as approved .All the Components should be warrantied for a replacement period of 5 yearsagainstdefects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.4 moudle(125mmx75mm) |
| 66 | 12 moudle(200mmx150mm) |
| 67 | Supply and fixing of 5 Amp modular switches on existing modular board including cover plate screw etc complete as required(for MCH Building) |
| 68 | Supplying and fixing of following sizes of medium class PVC FRLS, HMS conduitISI marked along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required as per direction of Engg.-in-Charge .MAKE KINJAL/ AKG/Anchor or equievalant reputed make A catagory ISI marked as approved20 MM |
| 69 | 25 MM |
| 70 | Supplying and installation of AC starter Modular type, Equievalant higher model of Schneider/Hager/Siemens/Panasonicmake or equievalant reputed make & model A catagory ISI marked as approved coil voltage-415 Volt A.C. & O/L range of 9-14A range on mod Box of suitable size including modular coveras required as per direction of Engg.-in-Charge .All the Components should be warrantied for a replacement period of 5 yearsagainstdefects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 71 | Supply and fixingCALL bell (Ding dong type) /Buzzer on the existing switch box/cover. Equievalant higher model ofSchneider/Hager/Siemens/Panasonicmake or equievalant reputed make & model A catagory ISI marked as approved .as required as per direction of Engg.-in-Charge.All the Components should be warrantied for a replacement period of 5 yearsagainstdefects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 72 | S/F of Bakelite angle holder/batten holder (make-Anchor/Havells/Panasonic or equievalant reputed make A catagory ISI marked as approved )of ISI marked conforming to IS-1258/1987 in place of ceiling roseas per direction of Engg.-in-Charge .All the Components should be warrantied for a replacement period of 5 yearsagainstdefects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 73 | Supplying,laying of 3cx2.5 sq.mm copper flexible cable with insulated cover of reputed make,ISI marked with all other concerned materials as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials (for Street light connection at roof of MCH Building) |
| 74 | Sub-Head II (Light fitting Fixture & Fan)Supplying, installation, of exhaust fan of heavy duty 300 mm sweep(Make-Equievalant higher model with 5 star ratedof Havells/almonard/Usha or equievalant reputed make & model A catagory ISI marked as approved) of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg.-in-Charge. Replacement Warranty will be 5 years. |
| 75 | Supplying, installation, testing and commssioning of 1400 mm sweep white/milky colour ceiling fan Make-Equievalant higher model with 5 star ratedof Havells/Almonard/Panasonic/Ushaor equievalant reputed make & model A catagory ISI marked as approved) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required.(With fan Regulator) as required as per direction of Engg.-in-Charge.Replacement Warranty will be 5 years. |
| 76 | Supplying, Ceiling Fan regulator as required as per direction of Engg.-in-Charge. |
| 77 | Supplying and fixing of Energy efficient surface mounted square shape 20 W LED luminaireof dimension of 225x 225 x 35 mm consists ofwhite powder coated , die-castAlluminiumhousingwith high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 20 watt and lumen output of 1500 lumens, , CRI not lessthan 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 2.5 KV , L70 B50: 30000 hrs (2 yrs warranty)and all other accessories suitable for operationon 220 V to 240 Vsupply as required as per direction of Engg.-in-Charge. ( Make : Panasonic /Trilux/Osram/PHILIPS/Wipro or equievalant reputed make & model A catagory ISI marked as approved).The luminaire should be Replacement Warranty will be 5 years |
| 78 | SITC of energy efficient LED tube light fittings with decorative alluminiumbatten and LED tube light having power rating not more than 20 watt and lumen output not less than 2200 lumen complete with electronic driver and all other accessories withdiffuser having 5 years warrantyi/c connection etc as requiredas per direction of Engg.-in-Charge. (Similar to Panasonic /PHILIPS/LT/wipro or equievalant reputed make & model A catagory ISI marked as approved.). The luminaire should be Replacement Warranty will be 5 years . |
| 79 | Supplying and fixing of Energy efficient Recess mounted LED luminaire made up of CRCA powder coatedsheet steel housingof 595 X 595 mm x 70 mmsize with of not more than25W and system lumens output not less than 3250lumens (120 lm/ wt)withdiffusers for better light transmission and pure effect with High luminous flux LEDs for better light output, CRI not less than 80, CCT of 5700-6500 degree K, THD less than 10%,internal surge protection of 3 KV,complete with Non integrated isolated electronic driver(protects the output /secondary side from any disturbance on the input / primary side ensuring safe operation)and all other accessories suitable for operation on140- 270 V, 50 Hz ,L70 @50,000 burning hrs (5 years warranty)supply .as required as per direction of Engg.-in-Charge (Make: Panasonic / LT/Trilux /Philips/Wipro/jaquaror equievalant reputed make & model A catagory ISI marked as approved) |
| 80 | SITC of IP 20 Non-integral flexible LED strip light,High optically efficient diffuser,, 4000K with 12 w/mtr @ 5Mtrpool with Driver extra as required as per direction of Engg.-in-Charge ( Make : Panasonic/PHILIPS/Wipro/jaquar or equievalant reputed make & model A catagory ISI marked as approved. )The luminaire should be Replacement Warranty will be 5 years |
| 81 | Supplying and fixing of small focus light for small monuments as 30W , 5700 Krequired as per direction of Engg.-in-ChargeMake : Panasonic/PHILIPS/LT/WIPRO or equievalant reputed make & model A catagory ISI marked as approved.)The luminaire should be Replacement Warranty will be 5 years |
| 82 | BDBS,DB,AC DB,FLOOR PANELS,MCBSSupplying and fixing of following mentionedway, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts shall be as per IEC 61439-3,integrated door earthing system offering additional safety to the user,High quality polyurethane Gasket,the box and cover shall be fabricated to withstand IK09,the DB should be properly pre-treated with 7 tank process and duly powder coated, phosphatized with powder coated finish, on surface/recess, complete with terminal blocks,with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/ /ABB(Equivalant model) or equievalant reputed make & model A catagory ISI marked as approved.as per direction of Engg.-in-Charge. The Distribution boardsshould be Replacement Warranty will be 5 years 4 Way(8+12) Way TPN MCB DD DB Horizontal Type as per IEC 61439-3 suitable for Flush mounting and Surface mounting with 100A Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar & Cable ties for cable management, prefitted masking sheet, IP43-IK09 with metal door(FOR LIGHT,POWER INDOOR,3-PH,POWER LOAD) Warranty on DB is 2 years. |
| 83 | Supply and fixing of 12 wayDD single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) (ALL LIGHT WITHCORRIDOOR/COMMON AREA,EM LIGHT,UPS LOAD, EM LOAD LIGHT LOAD,POWER LOAD ) |
| 84 | 2+4 way MCB EnclosureDB (GLAZEDdoor)(only each EM. CONNECTION UPS LOAD) |
| 85 | Supplying and fixing 20 amps rating, 240 volts, C series, Double poles MCB of Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/L&T (Equievalant model)/ABB(Equivalant model) or equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DB complete with connections as per direction of Engg.-in-Charge.The MCBshould be Replacement Warranty will be 5 years .MCB should have the fault indication system in different colour for ON, OFF & TRIP condition or Mid trip position for Trip conditions for easier identification of fault.Warranty on MCB is 5 years. |
| 86 | Supplying and fixing 6 amps to 32 amps rating, 240 volts, C series, single poles MCB of Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/L&T (Equievalant model)/ABB(Equivalant model)or equievalant reputed make & model A catagory ISI marked as approved.the existing MCB DB complete with connections as per direction of Engg.-in-Charge.The MCBshould be Replacement Warranty will be 5 years.MCB should have the fault indication system in different colour for ON, OFF & TRIP condition or Mid trip position for Trip conditions for easier identification of fault.Warranty on MCB is 5years. |
| 87 | Supplying and fixing 40 Amps rating, TPN, 415 volts, RCCB,300mA .Make-Equievalant highermodel ofLegrand/Snheider/Siemens / L&T/ABBor equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. .(4W TPN BDB IC)AC ODU CONTROLLER). TheRCCBshould be Replacement Warranty will be 5 years |
| 88 | Supplying and fixing 40Amps DP 240 volts, RCCB,300mA Make-Equievalant highermodel ofLegrand/Snheider/Siemens / L&T/ABB or equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DBin the existing MCB DB complete with connections as per direction of Engg.-in-Charge. TheRCCBshould be Replacement Warranty will be 5 years |
| 89 | Supplying and fixing 63Amps DP 240 volts, RCCB,300mA Make-Equievalant highermodel ofLegrand/Snheider/Siemens / L&T/ABBor equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge.TheRCCBshould be Replacement Warranty will be 5 years |
| 90 | Supplying and fixing 63Amps TPN 415 volts, RCCB,300mA Make-Equievalant highermodel ofLegrand/Snheider/Siemens / L&T/ABB or equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DBin the existing MCB DB complete with connections as per direction of Engg.-in-Charge.(for power BDB & AC ODU, 8 way TPN BDB IC).The RCCBshould be Replacement Warranty will be 5 years |
| 91 | (Earthing) INSTALLATIONS/IT/C Of Earthing with copper earth plate 600 mm x 600mm x 6 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc (WITHcharcoal and salt) as required as per direction of Engg.-in-Charge.The entire earthing systemshould be Replacement Warranty will be 5 years |
| 92 | Providing and fixing 4 mm dia copper wire on surface or in recess for loop earthing as required.as per direction of Engg.-in-Charge. |
| 93 | Providing and fixing 25mm x 5mm copper strip on surface or in recess for connections etc. as required as per direction of Engg.-in-Charge. |
| 94 | Providing and fixing 50mm x 5mm copper strip on surface or in recess for connections including insulator etc. as required as per direction of Engg.-in-Charge. |
| 95 | Supplying and making brick massonary pedastal with extra super structure including cement plastering etc as required as per direction of Engg.-in-Charge. |
| 96 | CABLINGAND END TERMINATIONMAIN AREASupplying of one number PVC insulated armoured and PVC sheathed XLPE propertyAL. conductor power cable of 1.1 KV gradePOLYCAB/HAVELLS/Finolex or equievalant reputed make ISI marked as approved of following size cables as per direction of Engg.-in-Charge.Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials3.5core x 35 sq mm ( FOR DG 2 RUNS,FDB POWER 01 RUN ) |
| 97 | 4core x 16 sq mm (For Street light) |
| 98 | 4 core x 4 sq mm (for small power) |
| 99 | 3.5core x 35 sq mm (To FDB LIGHT / power BDB/UPS PANEL,separate panel) |
| 100 | LAYINGOF CABLELaying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kvgrade size not exceeding 25 SQ. MMin surface with shaddle and screw etc as required as per direction of Engg.-in -charge. |
| 101 | Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kvgrade size not exceeding 400 SQ. MM From 120 SQ. MM in surface with shaddle and screw etc as required as per direction of Engg.-in -charge. |
| 102 | Supplying and making end termination with brass compression gland and aluminium lugs for following mentioned size cable.as per direction of Engg.-in-Charge. 4 core x16sq mm |
| 103 | 3.5 core x35 sq mm |
| 104 | 3.5 core x95 sq mm |
| 105 | Providing,fixing and laying offollowing dia G.I. pipe (medium class) in ground complete with G.I fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge. 50 mm dia |
| 106 | Providing,fixing and laying of fallowing dia HDPE pipe (medium class) in ground complete withfitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge. 100 mm dia |
| 107 | CABLE TRAY /RACE WAY FOR DISTRIBUTION OF POWERHOT DIPP GALVANIZED(GC) AS PER EN-ISO-1461 , FLOOR RACE WAY WITH JUNCTION with internal dimensions ofsize 34mm(H) x 225mm(W),of Legrand - Cablofil makeor equievalant reputed make ISI marked as approved.The Load bearing capacity of the Cable Traysshould be minimum of104.8Kg/meter at the span of1.5Meter as per UL specifications.(With all accessories,bend,cover,supporter)WITH REQUIRED SIZED JUNCTION BOX ,COVER CONNECTORas required as per direction of Engg.-in-Charge. |
| 108 | Main Panel for CHC Building (Indoor Unit)Supply,installation,testing&commissioning of distribution control panel board wallmounted size 30\"x18\"x10\" made out of 16SWG cr sheet painted with one coat of gray enameled paint & two coat of red oxide paint with following arrangement. Incoming-160A 36KA 4P MCCB-1no.,200A TPN bus bar Cu.-1set Outgoing- 63A 25KA 4P MCCB-5no, 40A 25KA 4P MCCB-1no. 32A DP MCB 10ka-2nos. DIgital Instrument- LED Indicating lamp (RYB)- 1set, 440V danger board, 1nos 160A/5A CT operated Digital MFM duly factory wired as per SLD.as per IE rules.(make-Ligrand/ Schnider/ Siemens) |
| 109 | Repairing of AC Machines such as gas filling for 1.5/2 ton Split & Window A.C machine, replacement of Capacitor, swing motor inindoor, sensor to indoor unit, PCB display of indoor, Outdoor unit repairing, re-installation of A.C, washing & cleaning, stabilizer repairing, proper drain pipe connection etc. complete |
| 110 | Campus LighteningSupplying ,installation & fixing of 11W(BOLLARD), High efficient LED with extruded Aluminium housing with PC diffuser.CRI>70, IP65, CCT - 6500K, Ambient temp-0 to 45DegC, Driver efficiency>80%,THD<25%, Powerfactor>0.9, Surge protection-2 kV, Multistage Isolated Constant Current-Constant Voltage driver and Safety Extra Low Voltage Safe level<60V DC as per IEC standard. Luminaire lumen = 565 lumens (51 lm/W). Similar to Wipro / Bajaj/Philips/ LT/Trilux make. including with foundation as per the drawing for inspection as required & as perdirection of Engg.-in-Charge. |
| 111 | Supply of materials and installation of pipe earth electrode made out of 50mm dia class B G.I. pipe of 3.0 metre long with arrangements for fitting/ terminationofG.I. flat / wire withG. I. nutbolts& washers including cost of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCC cover complete with labour for excavation of pit in all kinds of soil & rock as required and as per direction of Engineer-in-charge.The entire earthing systemshould be Replacement Warranty will be 5 years |
| 112 | Providing and fixing 4 mm dia copper wire on surface or in recess for loop earthing as required as per direction of Engg.-in-Charge. |
| 113 | CABLINGSupplying and laying of one number PVC insulated armoured and PVC sheathed XLPEAL. conductor power cable of 1.1 KV grade POLYCAB/FINOLEX/HAVELLS or equievalant reputed ISI MARKED MAKE of following size cables as per direction of Engg.-in-Charge.Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials3.5core x 35 sq mm |
| 114 | Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kvgrade size not exceeding 120 SQ. MM From 25 SQ. MM in surface with shaddle and screw etc as required as per direction of Engg.-in -charge. |
| 115 | Supplying and making end termination with brass compression gland and aluminium lugs for following mentioned size cable.as per direction of Engg.-in-Charge. 3.5 core x35sq mm |
| 116 | S.I.T.C of LT OUT DOOR FLOOR mounted cubical type MCB ENCLOSUREmade out by 2mm CRCA steel sheet duly derusted & pented by simens gray powder cote paint is designed asG.A drawing. (FOR USE) with 20A TPN MCB 1 no Legrand/Schneider/L&T/ABB or equievalant make & model as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period 2 years ofacceptance of materials |
| 117 | Supplying,laying of 3cx2.5 sq.mm copper flexible cable with insulated cover of reputed make,ISI marked with all other concerned materials as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials |
| 118 | Providing,fixing and laying of fallowing dia HDPE pipe (medium class) in ground complete withfitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials50 mm dia |
| 119 | Supply, Installation, Testing & Commissioning of 16M high mast shaft in three sections suitable for 180KM/HR wind speed along with head frame, luminaires carriage suitable for 9 luminaires in symmetrical arrangement and other accessories manufactured in factory. Supply of LED floodlight type BARFEG 250W Supply of LED type single dome aviation obstruction light. Supply of outdoor stand mounted feeder pillar with 32A TPN incomer, single dial time switch, 25A TP contactor for the automatic switching of luminaries, power tool control with 2 no 9A contactors and raise lower push button, Incoming 35 sq. mm and out going 16 & 2.5 sq. mm terminals. Supply of raising lowering system comprising double drum winch, 6mm diameter SS wire rope, trailing cable, connector, integral power tool motor, manual handle, junction box, lightning finial. (Wiring material from JB to individual luminaire & MCB in base compartment are not included and are a part of installation). Supply of foundation boltsanufactured from special steel along with nuts, washers, anchor plate |
| 120 | S/I/T&Commissioning of LT OUT DOOR FLOOR mounted cubical type timer panel with 32A 4P MCB ,40A TP CONTACTOR ,TIMER with 15 nos 10A SP MCB C as per direction of Engg.-in-Charge. .(Equievalant modeleach item of Legrand/Schneider/L&T/ABB or equievalant make & model)Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for 2 years after acceptance of materials. |
| 121 | P.H WorkSupplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor PVC pipes conforming to ASTM-D-1785/89 of the following nominal bore, tube fittings and clamps including making the wall good. ceiling and floor, testing all complete as per specification and direction of the Engineer in charge.(Oriplast/Supreme/Finolex)20mm dia PVC ASTM pipe (sch-80)Ground floor |
| 122 | 25mm dia PVC ASTM pipe (sch-80) |
| 123 | 32mm dia PVC ASTM pipe (sch-80) |
| 124 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 20mm dia C - PVC pipe Ground floor |
| 125 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materialsincluding cost & conveyance of all materials to worksite, payment oftaxes etc. allcomplete as per P.H specification and direction of the Engineer-in-charge.15mm dia CP angle stop cock(FLR-ACR-5053N) |
| 126 | 15mm dia CP two way bib cock(FLR-CHR-5041N) |
| 127 | 15 mm dia CP S.B. Bib cock(CON-CHR-037KN) |
| 128 | 15 mm dia CP L.B. Bib cock(CON-CHR-107KN) |
| 129 | 15mm dia CP Pillar Cock (FLR-ACR-5015) |
| 130 | WALL MIXER WITH PROVISION FOR OVERHEAD Shower (FLR-ABR-5273UPR) |
| 131 | 20mm dia CP Con. stop cock (CON-CHR-089KN) |
| 132 | 25mm dia brassfull way valve (Shakti make) |
| 133 | 32mm dia brassfull way valve (Shakti make) |
| 134 | 15mm dia CP Health faucet (Con-ALD-MCH-573 Jaquar make) |
| 135 | 15mm CP Extension piece |
| 136 | 125mm CP grating |
| 137 | 15mm size C.P. flange |
| 138 | Supplying all materials , labour, T&P and fixing rotational mouldedpolyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr widthKBbrickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxesetc.all complete as per approved drawing , P.H. specification and direction ofEngineer-in-charge. 2000 liters capacityPVC water storage tank top of 1st floor |
| 139 | supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite,payment of royality, taxes etc. all complete as perdirection ofEngineer-in-charge.Ground floor |
| 140 | Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proofas per P.H. specification and direction of Engineer-in-chargeGround floor |
| 141 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damagesincluding watering ,curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge.Ground floor |
| 142 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer\"s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment oftaxes etc.all complete as per P.H specification and direction of the Engineer-in-charge. 110mm U-PVC SWR Pipe (Supreme/Ashirvad) |
| 143 | 110mm U-PVC‘P’ Trap(Ori Plast/Finolex/Supreme Make) |
| 144 | 110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make) |
| 145 | 110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make) |
| 146 | 110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make) |
| 147 | 100mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make) |
| 148 | 110mm U-PVC S/Jn door(Ori Plast/Finolex/Supreme Make) |
| 149 | 110mm U-PVC D/Jn door(Ori Plast/Finolex/Supreme Make) |
| 150 | 110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make) |
| 151 | Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI \"p\" or \"s\" trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.580mm size Orissa pan (Hindware/Parryware/Neycer make) |
| 152 | Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C pan) with integral ‘P’or ‘S’ trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1), fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer in charge.One piece commod(Hindware)ELEMENT Cat No.92084. |
| 153 | Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral \"p\" or \"s\" trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-chargeEuropean water closet with ‘S’ trap plain (Hindware)No.20040 |
| 154 | Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment oftaxes etc. all complete as perP.H specification and direction of the Engineer-in-charge10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make ) |
| 155 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered \"Hot\" and \"Cold\" with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment oftaxes etc. all complete as perP.H specification and direction of the Engineer-in-chargeWash Basin Counter Top Hindware(Cat No.91008) |
| 156 | 550mmx400mm W.H.basin (Hindware/Parryware/Neycer make)with 15mm dia C.P.pillar cock (Jaquar make) with PEDESTRAL |
| 157 | Supplying all materials, labour, T&P for fitting & fixing Kitchen sink of all standard sizes with a pair of bracket, C.P. waste, trap & P.V.C. waste pipe & painting brackets including supply of cement concrete & mortar etc. all complete. 24” x 18” x 10” sink of nirali make. |
| 158 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge25mm x 600mm long CP towel rail(Jaquar)ACN-ACR-1111N |
| 159 | CP towel Ring(Jaquar)ACN-ACR-1121N |
| 160 | Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge.600 x 125mm plate glass shelf with CP guard rails(Jaquar)AKP-CHR-35771P |
| 161 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.600mmx450mm size B.E mirror (swivelled type) |
| 162 | Design Large Mirror.14 .00mtx0.90m x 0.90mt = |
| 163 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in chargeCP soap holder (Jaquar)ACN-ACR-1131N |
| 164 | Elena prime manual 10 ltr gyser (Jaguar make) EPM-WHT-V010 |
| 165 | Supplying all materials labor T&P & Fitting & fixing CP shower with rim with supply of red lead and yarn nail complete as per direction of Engineer in charge.15mm CP revolving shower (Jaquar)CON-CHR-209KN |
| 166 | Supplying all materials , labour, T&P and cutting holes through existing brickor laterite masonry wall for takingU-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge |
| 167 | Supplying all materials , labour, T&P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge |
| 168 | Supplying all materials labour T&P filling sand in lavatories well watered and rammed including lead of materials to work site.Ground floor |
| 169 | Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-chargeGround floor |
| 170 | Supplying the waterproofing material Pidifin 2K of Dr.fixit or equivalent water proofing material and appling in two coat over the concrete floor and dado upto 1’6\" in wall including cleaning,applying and mending as per specification including all labour charges as per direction of Engineer-in-charge. |
| 171 | Supplying all materials, labour, T&P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tilesincludingwatering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size 30cmx30cm Kajaria/Jhonson/Orient make to be pre-approved by the Engineer-in-charge )Kajaria/Somany/Johnson tile 60cmx60cmGround floor |
| 172 | Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,paymentof royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. Ground floor - (Qnty same as Wall Tiles in G.F) |
| 173 | Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirtingon 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tilesincludingwatering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size 30cmx45cm Kajaria/Jhonson/Orient make to be pre-approved by the Engineer-in-charge )Kajaria/Somany/Johnson tile 60cmx30cmGround floor |
| 174 | Granite Tiles 20mm thickGround floor |
| 175 | Factory made single leaf Solid WPC (Wood polymer) composite door shutter of 25mm thickcompacted with wood grain finishstructural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material,The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre\"s standards and specifications and the door shutters Conforming to relevant I.S.specification. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter. |
| 176 | Factory made Solid WPC door frame of size 95mmx55mm fabricated .The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The WPC frame shall be provided with The material and process for manufacturing the door frames shall conform to Relavent I.S.specification. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigmentscomplete in all respect as per specification and direction of the Engineer in charge |
| 177 | Supplying all materials, labour, T&P & constructing mesonary drain of size 0.30mtr x 0.45mtr drains as per P.H. design & specification including lead of all materials to site. |
| 178 | Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) pure chill 120 PSS UV of size 750 x 570 x 1350mm hight with water storage capacity 120 liter\"s along with 3 noa of faucets 2 for cold water and 1 for normal water including a flow of 1.5 ltr per munite etc all complete as per approved drawing , specification and direction of the Engineer in chargeAqua guard pure Chill 120 PSS UV |
| 179 | Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture\"s specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge110mm dia P.V.C. pipe |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
