Military Engineer Services-MES has published Tender For Repair And Maint Of Sewage Pump And Pipe Line, Swimming Pool, Incinerator, Fire Alarm System, Lift And Diesel Gen Set At Tibri Mil Stn Under Ge Gurdaspur.. Submission Date for this Tender is 03-05-2023. Alarm Systems Tenders in gurdaspur Punjab. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 13-Apr-2023 | Corrigendum No 1 | Date | 26-04-2023 |
| 2 | 17-Apr-2023 | Corrigendum No 2 | Other | 26-04-2023 |
| 3 | 17-Apr-2023 | Corrigendum No 2 | BOQ | 26-04-2023 |
| 4 | 26-Apr-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 03-05-2023 |
| Sl. No. | Item Description |
| 1 | Repair to alternater 110 KVA /100 KVA disconnecting electrical connection from site carefully and shifting to repair to workshop dismantling the complete alternator and dismentling stator winding carefully and rewinding of stator with super enamelled existing size of copper winding wire with insulation material and varnish. Reassembling after repair and shifting to site and testing on load with full satisfaction of Engineer-in-Charge.Note : All T&P, Vehicle and labour shall be provided by contractor. |
| 2 | All as per Srl item No 01 above but repair to alternator of 15 KVA to 31 KVA DG Set. |
| 3 | Supply and replacement of self starter Assbly 12 volt complete with battery lead andbattery terminal suitable for 100 to 125 KVA DG Set complete all as specified and directed. Make :- Lucas or equivalent as approved. |
| 4 | Repair overhauling of self starter 12 Volts including replacement of worn out clutch, repair to main AUX fieldcoil, solonoid switch, corbon brushs, spring and rewinding of armature etc for 25 KVAto 63 KVA DG set. Make : Lucas or equivalent as approved. |
| 5 | All as per Srl item No 4 here-in-before but for 100 KVA to 125 KVA DG Set. |
| 6 | M&L for repair /overhauling of dynomo including supply & replacement of new carbon brush and re-winding of armature and testing on loadof the DG set of capacity 100 KVAall as directed by Engineer in Charge. |
| 7 | M&L for taking out existing non clog sewage pump,set of any type and size from sewage sump (alongwith existing column pipe) including all fittings complete all as specified and directed. Note : All T & P vehicle and man power shall be provided by contractor. |
| 8 | M&L for lowering non clog sewage pump,set of any type and size in sewage sump(alongwith column pipe) including all fittingscomplete all as specified and directed. Note : All T & P vehicle and man power shall be provided by contractor. |
| 9 | M&L for disconnecting and taking out motor from non clog sewage pump, dismantaling the burnt motor,rewinding the motor with super enamelled copper winding wire as per existing gauge, size including suitable insulation material cotton tape, varnish , insulation paper , sleeves and dry & baking etcconnections etc and assembling completeafter duly repair installation, commisioning and testing upto the satisfactory working performanceincluding replacing bearingfor NDE & DE side of motors for the capacitiy 12.5 HP, 3 Phase, 415 Volt, complete all as specified and directed. Note:- All T&P vehicle and manpower will be provided by contractor.The repair of pump motor should be carried out within 72 hours after intimation of breakdown to the contractor by means of whats up, massage, phone calls, letter etc.Contractor should carry out testing for smooth functioning of pump motor at existing position within 72 hours failing which a penalty of Rs. 2000/- per day will be levived on the contractor. |
| 10 | S&F in replacement of CI Impeller sutaible for 12.5 HP sewage non clog pumping set complete all as specified. |
| 11 | S&F in replacement of Ball Bearing as per sample for 12.5 HP sewage non clog pumping set etc complete all as specified. |
| 12 | S&F in replacement MS tail piece, 6" dia, length as required, both end flanged, with nuts bolt and rubber flanged complete complete all as specified and directed. |
| 13 | S&F in replacement rubber insertion sheet/ gasket sheet4 mm thick for flanged MS/CI/DI pipe of 80/100mm bore complete all as specified and directed. |
| 14 | Taking out, dismantaling the mono block pump motor, from foundation / site, transporting the same to workshop, taking out of all burnt winding wires by strip opening of 3phase electric motor of any make, rewinding the motor with super enamled copperwinding wire of required gauge and quantity including varnishing insulation sheet cotton, glass sleave etc as required, reassembling,testing, transporting back to site from workshop, installing back and making connection and again testing for motor capacity0.5 HP to 1 HP complete all as specified and directed. Note :- All T&P vehicle and manpower will be provided by contractor.The repair of pump motor should be carried out within 72 hours after intimation of breakdown to the contractor by means of whats up, massage, phone calls, letter etc.Contractor should carry out testing for smooth functioning of pump motor at existing position within 72 hours failing which a penalty of Rs. 500/- per day will be levived on the contractor. |
| 15 | All as perSrl item No 14 here-in-before but for motor of capacity 2HP to 4HP |
| 16 | All as perSrl item No 14 here-in-before but for motor of capacity 10 to 12.5 HP. |
| 17 | Supply & fixing Mechanical Oil Seal for 12.5 HP, sewerge submersible motor & pump including taking down old unserviceable one complete all as specified and directed. Make :- Kirloskar or equivalent as approved. |
| 18 | M & L in replacement battery, lead acid type 180 AH, 12 Volts 25 plates, maintenance free complate all as specified and directed. |
| 19 | M & L in replacement battery, lead acid type 120 AH, 12 Volts 25 plates, maintenance free complate all as specified and directed. |
| 20 | M & L in replacement battery, lead acid type 100 AH, 12 Volts 25 plates, maintenance free complate all as specified and directed. |
| 21 | M & L in replacement of PVC insulated battery leadstrandedcopper conductorof size 50 Sqmm complete all as specified & directed . |
| 22 | General servicing of DG Set of 12.5 KVA capacity, Make kirloskar, Model D-9, Air cooled type by cleaning externally, taking out tapet cover and carrying out tappet setting including replacement of tappet cover gasket, tightening of all external fasteners, bolts, nuts etc., cleaning of benjo bolt filter of fuel feed pump, cleaning of fuel filters, oil filters and air filter including replacement of filter elements, engine oil, fan belts, engine hoses, worn out electric wiring, meters, including toping up of coolant, electrolyte of battery etc. all as required and directed for proper designed output of gen set. NOTE: Spares e.g. fuel filter element, oil filter element, air filter element, coolant, engine oil, hose pipes, fan belts, meters etc. as required to be replaced shall be measured and paid seprately as "supply only". Minor parts e.g. bolts, nuts, washers etc. including necessary T & P and cleaning materials as required for servicing shall deemed to be included in the rate quoted. |
| 23 | All as per Srl item No22 here-in-beforebut for DG set of capacity25 KVA to 30 KVA, Make Cromton Greaves / Kirloskar, water cooled type. |
| 24 | All as per Srl item No. 22 here-in-beforebut for DG set of capacity35 KVA 100 KVA, Make :- Cromton Greaves / Kirloskar, water cooled type. |
| 25 | All as per Srl item No. 22 here-in-beforebut for DG set of capacity110 KVA to 160 KVA, Make :- Kirloskar, water cooled type. |
| 26 | Supply only pre filter and fine diesel filter element for 12.5 KVA Gen Set, Make :- Kirloskar |
| 27 | All as per Srl item No 26 here-in-before but for25 KVA Gen Set, Make Cromton Greaves / Kirloskar, water cooled type. |
| 28 | All as per Srl item No 26 here-in-before but for30 KVA to 35 KVA Gen Set, Make Kirloskar, water cooled type. |
| 29 | All as per Srl item No 26 here-in-before but for 40 KVA to 63 KVA Gen Set, Make Kirloskar, water cooled type. |
| 30 | All as per Srl item No 26 here-in-before but for100 KVAto 160KVA Gen Set, Make Jackson/ Cummins and Kirloskar, water cooled type. . |
| 31 | Supply only oil filter element for 12.5 KVA Gen Set, Make Kirloskar. |
| 32 | All as per Srl item No 31 here-in-before but for25 KVA to 35 KVA Gen Set, Make Cromton Greaves / Kirloskar, water cooled type. |
| 33 | All as per Srl item No 31 here-in-before but for40 KVA to 63 KVA Gen Set, Make Kirloskar, water cooled type. |
| 34 | All as per Srl item No 31 here-in-before but for100 KVA to 160 KVA Gen Set, Make Jackson/ Cummins and Kirloskar, water cooled type. |
| 35 | Supply only rubber coupling for 12.5KVA Gen Set, MakeKirloskar. |
| 36 | All as per Srl item No 35 here-in-before but for25 KVA to 35 KVA Gen Set, Make Cromton Greaves / Kirloskar, water cooled type. |
| 37 | All as per Srl item No 35 here-in-before but for40 KVA to 63 KVA Gen Set, Make Kirloskar, water cooled type. |
| 38 | All as per Srl item No 35 here-in-before but for100 KVA to 160 KVA Gen Set, Make Jackson/ Cummins and Kirloskar, water cooled type. |
| 39 | Supply only fan belt for 12.5 KVA Gen Set of existing size. |
| 40 | All as per Srl item No 39 here-in-before but for25 KVA to 35 KVA Gen Set. |
| 41 | All as per Srl item No 39 here-in-before but for40 KVA to 63 KVA Gen Set. |
| 42 | All as per Srl item No 39 here-in-before but for100 KVAto 160 KVA Gen Set. |
| 43 | Supply only Hose Pipe Set with clamp for DG Set of 25 KVA to 35 KVA. |
| 44 | All as per Srl item No 43 here-in-before but for40 KVA to 63 KVA Gen Set. |
| 45 | All as per Srl item No 43 here-in-before but for100 KVA to 160 KVA Gen Set. |
| 46 | Overhauling and calibration of FIP assembly of 12.5 KVA capacity DG Set at an authorised workshop including replacement of worn out rings, plungers, damper plates, gasket etc.and including taking out, transporting, refitting, refixing & testing complete. |
| 47 | Overhauling and calibration of FIP assembly of 25 KVA to 63 KVAcapacity DG Set at an authorised workshop including replacement of worn out rings, plungers, damper plates, gasket etc.and including taking out, transporting, refitting, refixing & testing complete. |
| 48 | Supply only for topping upof water coolent in radiator of DG set all as directed by Engineer-in-Charge. |
| 49 | Supply only engine oil of DG Set of 10W-30/20W40 or equivalent all as directed by Engineer-In-charge |
| 50 | M&L for replacement of rectifire for the DG set of capacity 12.5 KVA to 63 KVA all as specified and directed by Engineer-in-Charge. |
| 51 | M&L for replacement of rectifire for the DG set of capacity 100 KVA to 160 KVA all as specified and directed by Engineer-in-Charge. |
| 52 | S&F in replacement automatic voltage regulator suitable for DG Set for 25 KVA to 160 KVA. |
| 53 | S&F in replacement of starting key of DG Set of capacity 100 to 125 KVA DG Set. |
| 54 | S&F in replacement of rusted doors of DG Set of capacity of 125 KVA DG Set of makeKirloskar/ Cummins. |
| 55 | S&F in replacement of rusted doors of DG Set of capacity of 30 KVA to 63 KVA DG Set of makeKirloskar/ Cummins. |
| 56 | Taking out the radiator assembly of DG set of 110/125 KVA capacity and transporting to work shop dismantling upper and lower tank and cleaning thoroughly, replacement of gasket packing , nuts, bolts, washers, descaling with appropriate chemical and brazing of damazed fins / tubes and reassembling & refixing in same position after testing complete all as specified and directed. |
| 57 | All as per srl item No 56 here-in-beforebut for DG Set of capacity 100 KVA to 63 KVA. |
| 58 | All as per Srl item No 56 here-in-beforebut for DG Set of capacity 30/40 KVA |
| 59 | M & L in replacement battery terminals brass with steel nuts, bolts & washers complete all as specified and directed. |
| 60 | S & F in replacement on load change over switch 100 Amp, TPN, 415 Volts with sheet steel enclosure with side handle complete all as specified and directed. |
| 61 | All as per Srl item No 60 here-in-before but 125 Amp. |
| 62 | All as per Srl item No 60 here-in-before but 250 Amp. |
| 63 | All as per Srl item No 60 here-in-before but 400 Amp. |
| 64 | M & L in replacement of on load change over switch in existing LT panel with fixing arrangements 4 poles, 415 Volts, 160Amp complete all as specified and directed. Make : ABB/ C&S/ HPL/ Havells/ Indo Asian. |
| 65 | Supplying and laying in replacementXPLE insulated armoured (under ground)heavy duty electric cable withstranded aluminium conductor1100 volts grade of cross-sectional area 16sqmm 4 core laid in trenches/ ducts/ through pipes/ along the pole etc complete all as specified and directed by Engineer-in-Charge. Note :-Excavation earth work, brick protection and cushioning shall be measured and paid separately. |
| 66 | All as per Srl item No 65 above but 95 Sqmm 3.5 core. |
| 67 | All as per Srl item No 65 above but 70 Sqmm 3.5 core. |
| 68 | All as per Srl item No 65 above but 50 Sqmm 3.5 core. |
| 69 | Excavation in trenches not exc 1.5 m wide and n. exc 1.5 min depth for in soft loose soil for poles, stay, cable, pipes etc, including cable protection, getting out all as specified and directed. |
| 70 | Returning filling in including spreading levelling watering and well ramming in layers nexc 25 cm thick in soft loose soil complete all as specified and directed. |
| 71 | Removal of excavated surplus/spoil on a distance n.exc 50 m and deposting where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed. |
| 72 | Supply and lay brick common burnt sub class "B" old size for protection of cables laid in trenches complete all as specified and directed. |
| 73 | M&Lfor sand cushioning trenches using fine sand to under ground cable, laid in two layers complete all as specified and directed. |
| 74 | M & L for earthing complete with galvansed steel earth plates electrode 60cmX600cmX6mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below the ground level) with edge of the plate not less then 1.5 mtr below the ground level connection to GI galvanised Iron strip 25mmX4mm as earthing lead by means of bolts/nuts chick nut & washers of GI or steel all as shownin electrical plate No 5 of SSR Part-I, connection to feeder piller all as specified including watering GI pipe 40mm bore medium grade PCC chamber using PCC 1:3:6 type C2 and PCC C-1 forcover funnel & wire mesh all as specified & directed by Engr-in-charge |
| 75 | Supply only copper sulphate of approved make by HQ E-in-C"s Branch. |
| 76 | Supply only Soda ash made of 100%sodium cabonate all as specified and directed. |
| 77 | Supply only Chlorine test kit with coloured sample complete with all testing fitmtnts and OT solution in suitable box make CHLOROMAX or equivalent and approved. |
| 78 | M&L for water suction PVC hose pipe 50mm dia make Deep/ Jyoti. |
| 79 | M&L fornylone rope 25mm dia of approved quality as as directed. |
| 80 | Supply only aluminum ferric white (Crystal type) make as per approved make by HQ E-in-C"s Branch. |
| 81 | Supply only bleaching powder Gde-ll confirming to IS-1065/89 revised with minimum chloride available 33.3% packed in 25/50 kg tight screwed bags complete all as specified and directed. Make: As per approved make by HQE-in-C"s Branch. |
| 82 | Comprehensive maintanance of stretcherlift at Military Hospital , Tibri of Make: OTIS,including periodical inspection and servicing, replacement of minor defective parts, safety test etc complete all as per manufacture"s specifications complete all as directed by Engineer-in-charge. Note :- Comprehensive maint includes all type of minor repair works to be carried out to make the lift smoothly functioning at all the times.Routine maint to be carried out minimum once inb a month, failing which a penalty of Rs. 5000/- will be levived on the contractor. In case of any breakdown the complaint to be attended withing 24 hours of time frame, failing which a penalty of Rs 100/- per hour will be levied on the contractor. |
| 83 | Supply and fixing in repair of car ceiling for BED elevator of lift installed at MH complete all as specified and directed. |
| 84 | Supply and fixing in repair of electronic door protection complete kitall as specified and directed. |
| 85 | M&L for Infrared sensor of closing and opening of door including dismantling the old one all as directed. |
| 86 | M&L for repair of LT panel including supply andreplacement of wiring of the Lift Panel upto the Header of the lift door with control wiring including supply and repalcement of the defective parts of the panel including contactors, timer, phase preventor, relay etc and testing of the panel for improved performance all as directed by the Engineer-In-charge |
| 87 | Supply and fixed in repair electronic hooterindustrial type of range 5 KM single phase 230 volt ,6000 RPMaluminium body complete all as directed and specified |
| 88 | Supply and fixing in repair of suction sweeper including electric motor of 3 HP capacity 440 volt 50 Hz with a head of minimum 20m including suction header, suction provision, electric cable, angle iron frame and wheel for heavy and extensive uses all as directed by Engineer in charge.Contractor shall submit written gurantee for one year for the suction sweeper for smooth functioning. |
| 89 | M&L for repair / serviceing of DOL Starter of pump motor of capacity 15HP of swimming pool including replacement of burnt items, defective parts etc all as directed by Engineer-in-charge |
| 90 | M&L for disconnecting and taking out pump motor of capcity 10 to 15HP from existing position,dismantaling the burnt motor,rewinding the motor with super enamelled copper winding wire as per existing gauge, size including insulation material cotton tape, varnish , insulation paper , sleeves, lugs etc and testing for improved performance as per the satisfaction of Engineer-in-charge |
| 91 | Supply and fixing in replacement of Nylon brush of superior quality for suction sweeper machine of existing size directed by Engineer-in-charge |
| 92 | Supply and fixing in replacement of PVC pipe corrugated type as per existing of size 40/50mm dia all as directed by Engineer-In-charge |
| 93 | Supply and fixing in replacement of pressure gauge of range 0 to 100 Kg/CM2 of existing make all as directed by Engineer-in- Charge |
| 94 | Supply & fixing in replacement of CI fittings including Tee, bends, nippel, coupling etc complete all as directed . |
| 95 | M & L for cleaning of UG sump of capacity 50000 Gallons (Swiming pool collection sump) as described below ):- (i) Dewatering with submersible / sludge pump to empty the sump tank upto base level (ii) Removing sludge from sump wall and bottom with the help of special sludge pump and remaining dirt which may have hidden in rogh slots of the bottom mannually with brush (iii) After cleaning the sump apply bleaching powder for disinfection of sump (iv) The sludge / waste removed from the sump shall be disposed off in dumping ground as directed by Engineer - in - charge |
| 96 | M&L in repair air termination single pointed aluminium rod,30 Cm long of dia 12mm including suitable insulatorscomplete all as directed and specified |
| 97 | Supply and fixing in repair aluminium strip 25mm x 3mm complete with saddle and fixing screws for fixing strip above ground. |
| 98 | Supply and fixing in repair GI strip 32mm x 6mm complete with saddle and fixing screws for fixing strip above ground. |
| 99 | Supply and fixing in repair test point terminal block made of GI plate size 75x75x25mm drilled and screwed including 3 Nos8mm dia 25mm long hex. head screws all as specified and directed |
| 100 | Supply and fix in repair, installaton commissioning and testing of All in One solar street lighting system complete with solar Panel, with IP 65 protection, solar panel, battery, charging circuit, LED driver are integrated in single casing, mounted on existing pole, connecting cable battery box reflector on its back including LED light of 40W, Aluminum alloy case, built in pipe mounting bracket, 120degrees wide lighting angle, efficiency min 95%. Make: Bajaj, Halonix, Philips, Crompton, Havells |
| 101 | Supply and fixingin replacementof flatsubmersible electric cable, PVCinsulated, sheathed with bare bunched copper conductor for submersible pump,1100 volts grade, 3 core,cross-sectional area 6 sqmm complete all as specified and directed. |
| 102 | All as per Srl item No 101here-in-before but cross-sectional area 10 sqmm. |
| 103 | S & F MCCB 250 Amp 25 KA 415 volt FP adjustable thermal & fixed Magnetic settingphase indication lampsall as specified and directed by Engineer-in-Charge. |
| 104 | S & F MCCB 160 Amp 25 KA 415 volt TP adjustable thermal& fixed Magnetic settingall as specified and directed by Engineer-in-Charge. |
| 105 | S & F MCCB 100 Amp 16 KA, 415 volt FP adjustable thermal& fixed Magnetic settingindication lampsall as specified and directed by Engineer-in-Charge. |
| 106 | S & F MCCB 63Amp 16 KA, 415 volt FP adjustable thermal& fixed Magnetic settingindication lampsall as specified and directed by Engineer-in-Charge. |
| 107 | S&F Isolator 4 pole 63 Amps in the existing panel of sewage motor panel all as directged and dpecified by Engineer-in-Charge. |
| 108 | Supply & fixing digital type Voltmeter 0 to 500 volts LEDdisplaywith slector switch complete all as directed and specified |
| 109 | Supply & fixing digital type Ameter 0 to 100 Amps LEDdisplaywith slector switch complete all as directed and specified |
| 110 | Supply & fixing in repair CI sluice valve class PN-1.6 ISI marked with stainless steel spindal and flanged both ends of size 100mm dia borewith hand wheel all as directed. |
| 111 | Supply & fixing in repair CINon return valve with forged brass disc 100 mm bore PN 1.6 complete with flanged on both ends all as specified and directed. |
| 112 | Sypply & fixing in repair 50mm dia cast iron air release valves with single air outlets, confirming to IS-14845 complete all as specified and directed. |
| 113 | S&F in repair offire bricks of primary and secondary fire chamber in double layer, set, jointed and pointed in fireclay including dismantling the old damaged bricks and testing for fire resistance all as dircted by Engineer-in-Charge. |
| 114 | Supply and fixing in repair of temp control gauge as per existing all as directed |
| 115 | Repair / replacement of glass type control wiring of control paneland of whole plant with new wire including testing all as direced by Engineer-in-Charge |
| 116 | M & L for preparing the surface by scraping out the old paint and painting of the whole chimney of the incenerator, applying one coat of red oxide primer and two coat of sliver colour glosy paint and scrubing out the old paint of primary, seconday chember, ID Fans, Motors, Sign boards, Pipes, Angle Irons, Channels etc and applying two coats of Alluminium paint with all colour codes to the full satisfaction of Engineer in charge all as directed and specified |
| 117 | M & L in repair 3 pole power contractor MNX - 45 of make L&T or equivalent all as directed by Engineer - in - Charge |
| 118 | M & L in repair 3 pole power contractor MNX - 25 of make L&T or equivalent all as directed by Engineer - in - Charge |
| 119 | M & L in repair 3 pole power contractor 3TF 35 of make Siemens or equivalent all as directed by Engineer - in - Charge |
| 120 | M & L of overload relay of range 15-25 Amps capacity all as directed by Engineer in Charge |
| 121 | M & L in repair of overload relay of range 30-50 Amps capacity all as directed by Engineer in Charge |
| 122 | M & L in repair of 3 phase Timer, 230 Volt, 50 Hz, Amps 15 upto 50Amp capacity all as directed by Engineer in Charge |
| 123 | M & L in repair of single phase preventor 230 Volt, 50 Hz all as directed by Engineer in Charge |
| 124 | Supply and fixing in replacement of push button of Red, green, and exiting colour 230 Volt all as specified and directed |
| 125 | M & L in repair 3 pole power contractor model TC1D2510 of make Siemens or equivalent all as directed by Engineer - in - Charge |
| 126 | M&L for attending of complaint of non working ofsewage pump, motors, defects in pump motor panel with minor defects rectification whenever arises, the mechanic/ electrician should visit the site and rectify the minor defects in panel and pump motor if there, in respect of non operation of pump due to phase change, tripping, terminal burnt etc all as directed by Engineer-in-Charge. Note :- AllT&Pand manpower will be provided by contractor.The repair of work should be carried out within 48 hours after intimation ofbreakdown to tghe contraccotr by means of what up, massage, phone calls, letter etc .Contractor should carry out testing for smooth functioning of pump motor at existing position within 48 hours failing which a penalty fo Rs 1000/- per daywill be levied on the contractor. |
| 127 | Repair / servicing of the firing motor of the incinerator of 20Kg/Hr capacity including repair / replacement of the solenoid valves, transformer, relays, winding etc with full satisfaction of the Engineer- in-Charge all as directed |
| 128 | Supply and fixing in replacement of heatingelements suitable for drying tumbler of20 kg capacityall as specified and directed |
| 129 | S&F automatic voltage regulator suitable for100 KVA Servo Voltage Stabilizer all as directed by Engineer in Charge |
| 130 | Taking out, dismantaling theServo Voltage Stabilizer from foundation andtransporting the same to workshop, taking out of all burnt winding wires by strip opening of 3phase voltage stabilizer of any make, rewinding the stabilizer with super enamled copper winding wire of required gauge and quantity including varnishing insulation sheet cotton, glass sleave etc as required, reassembling,testing, transporting back to site from workshop, installing back and making connection and again testing for 100 KVA Servo Voltage Stabillizer for improved performance all as specified and directed by Engineer-in-Charge.Note: -Supply only winding wire, transformer oil shall be measured and paid separately under relevant items |
| 131 | Supply only Copper winding wire of different gauge and size for servo voltage stabilizer, alternator rewinding and other works as directed by Engineer-in-charge |
| 132 | Supply only transformer oil for voltage stabilizer for replacememtall as directed by Engineer-In-charge |
| 133 | S & F in repair of chain pully block of 5 ton capacity insudtrial type heavy duty complete all as specified and directed. |
| 134 | M & L for cleaning of UG sump of sewage collection sump of capacity 50000 Gallons (Sewage collection sump) as described below ):- (i) Dewatering with submersible / sludge pump to empty the sump tank upto base level. (ii)Removing sludge from sump wall and bottom with the help of special sledge pump and remaining dirt which may have hidden in rogh slots of the bottom mannually with brush.(iii)After cleaning the sump apply bleaching powder for disinfection of sump.(iv) The sludge / waste removed from the sump shall be disposed off in dumping ground as directed by Engineer - in - Charge. |
| 135 | M&L for making connection of 48 Volt DC SMPS (100 Amps) for spectum at NFS at ASCON Node Batala and repair the same for non operation and replacement of all small defective parts like diode, timbles, connectors etc and makde smoothly operatational of SMPS all as directed and specified by Engineer-in-Charge. |
| 136 | Disconnecting and taking out motor from non clog sewage pump horizontal type 65 LPS , 30 mtr head 3 phase 440 volt including pump, dismantling the burnt motor, rewinding the motor with supper enamelled copper winding wire as per existing gauge, size including suitable insulation material cotton type, varnish, insulation paper, sleeves and dry and baking etc connections etc connections etc and assembling complete after duly repair installation, commissioning andtesting upto the satisfactory working performance complete all as specified and directed. Note :- All T&P vehicle and manpower will be provided by contractor.Therepair of pump motor should vbe carried out within 72 hours after intimation of breakdown to ghe contractor by means of whats up, massage, phone calls, letter etc.Contractor should carry out testing for smooth functioning of pump motor at existing position within 72 hours failing which a penalty of Rs. 2000/- per day will be levied on the contractor. |
| 137 | S&F in replacement of impeller bronze sutaible for sewage pump horizontal type 65 LPS, 30 mtr head 3 phase 440 volt pumping set complete all as specified and directed. |
| 138 | S&F in replacement of ball bearing as per sample for sewage pump horizontal type 65 LPS, 30 mtr head 3 phase 440 volt for both side front and rear side bearing of existing size etc complete complete all as specified. |
| 139 | Disconnecting and taking out motor from non clog sewage pump horizontal type 45 LPS , 30 mtr head 3 phase 440 volt including pump, dismantling the burnt motor, rewinding the motor with supper enamelled copper winding wire as per existing gauge, size including suitable insulation material cotton type, varnish, insulation paper, sleeves and dry and baking etc connections etc connections etc and assembling complete after duly repair installation, commissioning andtesting upto the satisfactory working performance complete all as specified and directed. Note :- All T&P vehicle and manpower will be provided by contractor.Therepair of pump motor should vbe carried out within 72 hours after intimation of breakdown to ghe contractor by means of whats up, massage, phone calls, letter etc.Contractor should carry out testing for smooth functioning of pump motor at existing position within 72 hours failing which a penalty of Rs. 2000/- per day will be levied on the contractor. |
| 140 | S&F in replacement of impeller bronze sutaible for sewage pump horizontal type 45 LPS, 30 mtr head 3 phase 440 volt pumping set complete all as specified and directed. |
| 141 | S&F in replacement of ball bearing as per sample for sewage pump horizontal type 45 LPS, 30 mtr head 3 phase 440 volt for both side front and rear side bearing of existing size etc complete complete all as specified. |
| 142 | S&F in repair fully automatic star delta starter (FASD)suitable for 10-15 HP motor all as specified and directed by Engineer-in-Charge. |
| 143 | S&F of PVC insulated, sheathed cable 3 core 16 Sqmm copper conductor stranded for connection the sewage pump from panel all as specified and directed. |
| 144 | Supply and installation in repairs of monoblock pump set with electric driven motor, single phase, 230 volts, 2800 rpm, 01/0.7 KW having suction 25mm bore and delivery 25mm bore all as specified and directed. |
| 145 | Supply and fixing in repair of battery charger of 12 volt 30 amps capacity fo charging minimum 4 batteries at a time all as specified and directed by Engineer-in-Charge. |
| 146 | Suppy and fixing in replacement of steel hinges of canopy as per existing of DG set of all type and capacity complete all as directed by Engineer-in-Charge. |
| 147 | M&L for repair of leakages of GI pipes of size 20mm by replacing the Tees, bends, sockets unions etc completeincluding all accessories with necessary exacavation and earth work returning filing & removal for that job , dewater arrangement is contractors reponsibility all as specified and directedby Engineer-in-Charge. Note :- One supervisor should report to JE in charge on daily basis with complaint register.The minor complaints should be done by 24 hours of time and major complaints within 48 hours of time frame.Failing which 200/- per day will be levied from the contractor as penalty.The contractor will arrange the security passes fo himself/ supervisor andhis work force as per the exising security of the station without any extra cost. |
| 148 | All as per Srl item No 147 here-in-before but size 25mm bore. |
| 149 | All as per Srl item No 147 here-in-before but size 50mm bore. |
| 150 | M&L for repair of leakages of CI/DI pipes of size 80mm by replacing the Tees, bends, sockets and providing the other material required at site such as lead joint, to complete the job including excavation and other earth work complete as specified and directedby Engineer-in-Charge. Note:- CI/DI bends, sockets , Y juctgion, cross, collars, cap, lead joint/ tighten joint and connected items will be measuredand paid separately. |
| 151 | All as per Srl item No 150 here-in-befor but size 100mm bore. |
| 152 | All as per Srl item No 150here-in-befor but size 150mm bore. |
| 153 | M&L in replacement for ISI marked CI/DI pipe fittings upto size 80 to 150mm dia such as bends, tapers tail pieces, Tee pieces, dummy plates, clamps to block leakages , caps and plug set including rubber ring push on joints complete all as specified and directed. |
| 154 | Taking out existing 20mm GI pipe lines for relaying/ refixing at site existing/ connected including cleaning complete all as specified and directed. |
| 155 | All as per Srl item No 154 here-in-before but 25mm bore. |
| 156 | All as per Srl item No 154 here-in-before but 50mm bore. |
| 157 | All as per Srl item No 154 here-in-before but 80mm bore. |
| 158 | S&F in repair GI tubing, medium grade, galvanised, with all fittings, laid in trenches of size 20mm borecomplete all as specified and directed. |
| 159 | All as per Srl item No 158 here-in-before but 25mm bore. |
| 160 | All as per Srl item No 158 here-in-before but 50mm bore. |
| 161 | All as per Srl item No 158here-in-before but 80mm bore. |
| 162 | Note: A Schedule of Credit for old/unserviceable demolished/dismantled items has been catered for in the tender.The Schedule of Credit is pre-priced by MES.The final amount of the tender shall be arrived at after deducting the total amount of Schedule of Credit from the total amount of BoQ as per General Summary sheet catered for after Schedule of Credit. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
