|
| 1 | M & L for preparation of old distempered and paintedsurfaces including washing, stopping by brooming down , scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, removing nails from wall surfaces etcand applying one coatDistemper oil emulsion complete all as specified and directed. |
| 2 | M & L Preparation of old distempered and paintedsurfaces including washing, rubbing down and stopping by brooming down , scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coats of Distemper oil emulsion on wall surfacesto achieve smooth surface without visiable of brush/hair mark complete all as specified and directed . |
| 3 | M&Lfor preparation of old decorated plastered surfaces of ceiling and applying one coat of distemper oil emulsionon ceiling complete all as specified and directed. |
| 4 | M&L for preparation of old decorated plastered surfaces of including washing, stopping by brooming down , scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, removing nails from wall surfaces etcand applying one coat of acrylic emulsion paint(exterior weather coat) of any tint as approved on wall surfaces to achieve smooth surface etc complete all as specified and directed. |
| 5 | M&L for preparation of old decorated plastered surfaces of ceiling including cornices, plasters etc and applying one coat of white wash complete all as specified and directed. |
| 6 | Complete removal existing treatment and applying2mm thick of Birla white putty after prepration of old plastered surfaces of wall complete all as specified and directed. |
| 7 | M & Lfor preparation of old decorated surfaces of walls (plastered or unplastered) and cornices, by brooming down , scrapping down smoke soot, moss and efflorescent salts if required and applying One coat of cement basepaint on surfaces of wall complete all as specified and directed. |
| 8 | M & Lfor preparation of old decorated surfaces of walls (plastered or unplastered) and cornices, by brooming down , scrapping down smoke soot, moss and efflorescent salts if required and applying two coat of cement basepaint on surfaces of wall complete all as specified and directed. |
| 9 | M & Lfor preparation of old decorated surfaces of walls (plastered or unplastered) and cornices, by brooming down , scrapping down smoke soot, moss and efflorescent salts and trading oil and greasy spots etcand applying one coat of white wash on walls all as specified and directed by Engr-in-Charge. |
| 10 | M&L for preparation of old paintedwooden surfaces of any description over 10 cm width or girth and applyingone coat of synthetic enamel paint complete all as specified and directed. |
| 11 | M&L for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 12 | M&L for preparation of old painted wooden surfaces of any description n.exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 13 | M&L for French polishing onsurface of any description, width or grit including cleaning and preparation the surface including a coat of wood filler with two or more coats all as specified and directed. |
| 14 | M&L preparation of old painted steel roof surfaces of CGI sheet, over 10cm in with or girth and applying one coat of synthetic ename roof paint complete all as specified and directed. |
| 15 | M&L Non-skid ceramic colour tiles (premium/special quality) 7 to 8 mm thick , (square/rectangular), area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 15 mm thick screed bed in cement sand mortar 1:6 including dismanthing floor/hearth or wall tilling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off premises complete all as specified and as directed. |
| 16 | M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.11 Sqm but not exc. 0.18 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface including 15 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes finished fair and even complete all as specified and directed.of tile including dismanthing floor/hearth or wall tilling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off premises complete all as specified and as directed. |
| 17 | M&L Vitrified ceramic tiles light shade, 10 mm thick (square/rectangular) polished, area of each tiles n. exc 0.36 Sqm in floors, set and jointed in cement slurry and pointed in white or colour cement to match over and including screed bed 15 mm thick in cement sand mortar 1:4including dismanthing floor/hearth or wall tilling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off premises complete all as specified and as directed. |
| 18 | M&L Vitrified ceramic tiles light shade,10 mm thick (square/rectangular) polished, area of each tiles n. exc 0.36 Sqm in vertical surfaces such as dado, skirting and riser etc, set and jointed in cement slurry and pointed in white or colour cement to match over and including 10 mm thick backing course in cement sand mortar 1:4including dismanthing floor/hearth or wall tilling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off premises complete all as specified and as directed. |
| 19 | M&LGlazed ceramiccolour tiles of size 350 x 250 x 7mm thick (premium/special quality) in vertical wall etc set and jointed with neat cement slurry and pointed in white or colour cement to match with the colour of tile over and including 10 mm thick backing course in cement sand mortar 1:4including dismanthing floor/hearth or wall tilling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off premises complete all as specified and directed. |
| 20 | M & L for glazed ceramic coloured tiles 300 mm X 200 mm X 7 mm thick as on vertical surface of wall such as skirting, dado, riser etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tiles including 10mm thick rendring in CM (1:4) on fair faces of brick or concrete surfaces finished fair and even on vertical surfaces of wallincluding dismanthing floor/hearth or wall tilling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off premises complete all as specified and directed. |
| 21 | Demoltion ofstone slabs and granitelaid, bedded and pointed in any mortar of any description or thickness in floors, aprons cills or plateform etc all as specified and directed. |
| 22 | M &for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 23 | M&L for rounding to edges of stone slabs one edge, such as in steps cooking plateform, and other similar situation complete all as specified and directed. |
| 24 | Taking down cement plaster in cement or cement lime mortar on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, Including removal of debries out side MoD land all specified and directed. |
| 25 | M&L for 10mm thick plaster in cm (1:6) on fair faces of brick or concrete surfaces including finishing even & smooth without using extra cement complete all as specified and as directed. |
| 26 | M&L for 5 mm thick plaster in cm (1:4) on fair faces of concrete surfaces of ceiling including finishing even & smooth without using extra cement complete all as specified and directed. |
| 27 | M&L for solid block wallingwith PCC solid blocks (1:3:6) type C1 (20 mm graded aggregate) exc 10 cm in width and setting in cement mortar (1:6) including demolition of PCC block walling of any description and in any position not oher wise described specifically provided complete all as specified and directed. |
| 28 | M&L for preparation of new plastered surface and applyingtwo coat of white or tinned with cement base paint over priming coat on exterior wall complete all as specified and directed by Engr-in-Charge. |
| 29 | M&L for preparation of new plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed. |
| 30 | S & F of 0.63 mm thick galvanized corrugated iron (CGI) sheeting with two corrugation side lap sheets having zinc coating @ 120 gram per sqm inclusive of both sides, fixed with coach screws/\"J\" type hook or L type hook and washers as in roof covering etc including dismantlingany gauge, thickness, including Nainital or similar pattern roof cverings complete all as specified and directed. |
| 31 | S & F 0.63mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating@ 120 gram per sqm including dismantling any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specifid and as directed. |
| 32 | Dismantling timber scantling infillets, rails, posts, rafters/purlins under 40 sqcm as in unframed work complete all as specified and directed. |
| 33 | M&L 2nd class HW plain fillets square rectangular triangular in section, clean sawn secured with nails sectiona area exc. 13 sqcm but n.exc 25 sqcm |
| 34 | S& F of 4 mm thick Non asbestos cement plain building boards, fixed to timber framework with screws fixed in ceiling,flat or sloping including dismantling of ceiling board of any description complete all as specified and directed. |
| 35 | M&L 2nd class HW plain fillets square rectangular triangular in section, clean sawn secured with nails sectiona area exc. 6 sqcm but n.exc13 sqcm |
| 36 | M&L 2nd class HW plain fillets square rectangular triangular in section, clean sawn secured with nails sectiona area exc 3 sqcm & n.exc 6 sqcm. |
| 37 | S&F 2nd class HW boarding 20mm thick fixed with nails as in eaves board planed one side with butt joint including dismantling boarding of any description complete all as specified andas directed. |
| 38 | S & F of 2nd class hardwood scantling, clean sawn in any position and any description as in unframed work including dismantling of timber scantling 40 sqcm and over in section in any position complete all as specified and as directed. |
| 39 | S & F in repair of 110 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint fixed to walls including clamps for securing pipe complete all as specified and directed. |
| 40 | S & F in repair75 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint fixed to walls including clamps for securing pipe complete all as specified and directed. |
| 41 | S & Fin repair 110 mm bore PVC (SWR) branch piece, single (Single ‘Y’ or \"T\") equal or unequal complete all as specified and directed |
| 42 | S & Fin repair 110 mm bore PVC (SWR) reducers complete all as specified and directed. |
| 43 | S & Fin repair110 mm bore PVC (SWR) bend any radius complete all as specified and directed. |
| 44 | S & F in repair75 mm bore PVC (SWR) bend any radius complete all as specified and directed. |
| 45 | S & F 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all specified and as directed. |
| 46 | S & F 15 mm bore steel water tubing medium grade galvanised with and including all fittings and fixed to walls and ceilings or laid under floors including taking down up or down complete all as specified and directed. |
| 47 | Refixing GI Tubing 15mm bore old steel tubing and connections in new or old position including tacking down complete all as speicified and directed. |
| 48 | S & F 20 mm bore steel water tubing medium grade galvanised with and including all fittings and fixed to walls and ceilings or laid under floors including taking down complete all as specified and directed. |
| 49 | Refixing GI Tubing 20 mm bore old steel tubing and connections in new or old position including tacking down complete all as speicified and directed. |
| 50 | M&L for Cutting chases, of girth not exceeding 10 cm for concealed water tubing or concealed conduit wiring, etc. in stone / brick masonry wall built in cement mortar and making good, disturbed surface in Cement mortar 1:3 complete all as specified and directed. |
| 51 | S & F 500 litres capacity double layer, rotational molded, polythene (white colour), double layer water storage tank, ISI Marked (Cylindrical vertical with closed top),colour white ,hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including dismantling complete all as specified and as directed. Make : Sintex, Polycon, waterwell. |
| 52 | S & F 1000 litres capacity white double layer, rotational molded, polythene water storage tank, ISI Marked (Cylindrical vertical with closed top),colour white ,hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc anddismantling water tanks complete all a specified and as directed. Make : Sintex, Polycon, waterwell. |
| 53 | S&F in repair 20 mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) complete all as specified and as directed. |
| 54 | S & F in repair 15 mm bore CP fancy type bib tap longbody cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 55 | S & F in repair Stop valves 15mm dia fancy type, cast copper alloy, screwed down, high pressure with crutch or butterfly handles, screwed both ends for iron pipe or for unions and fixed (concealed type) complete all as specified and directed. |
| 56 | S & F in repair bib tap of 15 mm dia in PTMT any colour high pressure screwed for iorn pipe and fixed. (minimum weight 90 gm) complete all as specified and as directed. |
| 57 | S&F in repair Stop valve of 15mm dia in PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 90 gms) complete all as specified and as directed. |
| 58 | S&F in repair of 15mm dia pillar taps fancy type, cast copper alloy, with capstan heads chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and flynuts screwed for iron pipe fixed complete all as specified and directed. |
| 59 | S & F in repairs PVC Connection 15mm size with PTMT nuts of length 600mm complete all as specified and as directed. |
| 60 | S & F in repairs to 600 mm long PVC flexible Waste pipe to WHB/urinals/Sink complete all as specified and as directed. |
| 61 | S&F stainless steel sink with draining board, made out of 1.00 mm thick sheet for kitchen withplug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915 mm X 460mm with bowl size 410mm X 330mm X 160mm, all as directed. |
| 62 | S&F in repairkitchen plate rack made of stainless steel sheet not less than 0.63mm thick of over allsize 36\"\" x 36\"\" x 10\"\" fixed to wall with brass screws etc complete all as specified and as directed.Make:- Prayag Cat part no. P-348 or equivalent make of Hindware / Bluestar |
| 63 | S & F in repair PVC low level white flushing cistern 9/10 litre capacity valve less, syphonic action type, complete with inlet, ball valve, float valve, bends, brackets, brass screws, handle, 32 mm dia PVC flush pipe of suitable length and making all connection and making good disturbed surface complete all as specified and directed. |
| 64 | S&F in repairs Vitreous China wash down water down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete. |
| 65 | S & F in repair Vitreous china squatting pan of pattern Orissa Pattern of size 580x 440 mm whitewith 110mm bore PVC ‘P’ or ‘S’ trap , front or back inlet but excluding flushing cistern and flush pipe including placing in position in floor and embedded in cushion of PCC type E2 ( 1:5:10, using 40 mm graded stone aggregates),and finishing the top surfaces to match with the existing flooring as in repairs. |
| 66 | S&F in repair ABS Body Hand Faucet with Rubbit cleaning system, 1.25 metre longeasy flex tube in chrome finish & wall hook , fixed in position all as specified and as directed. Make:-HindwareCat No. F 160027 equivalent series in KOHLER / Roca. |
| 67 | S&F in repair stainless steeldecorative pattern holder/end brackets suitable for drapery rod of 25 mm diacomplete. |
| 68 | S&F in repair stainless steeldecorative pattern end support suitable for drapery rod of 25 mm diacomplete. |
| 69 | S&F in repair25 mm dia stainless steeldrapery rod not less than 1mm thick cut to size and fixed in position, including Standard screw complete all as directed. |
| 70 | S & F in repairVitreous china wash hand basin, white, flat back of size 550 mm x 400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32mm dia, PVC flexible waste pipe of adequate length and dia and PVC connection 15mm size 450mm length with PTMT nuts, as in repairs, complete all as specified and as directed by Engineer-in-Charge.\" |
| 71 | S&F in repair brass chromium plated tubular towel rail 600mm long between the flanges and 20mm dia complete all as specified and directed. |
| 72 | S&F in repair Brass CP wall mixer for mixing hot & cold water screwed down for 15mm dia iron pipe and fixed complete all as specified and directed. |
| 73 | S & F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed. |
| 74 | S&Fin repairs corner glass selfincluding bracket etc.complete all as specified and directed.Make :Jaquar cat No ACN-1173 equivalent series in KOHLER/Roca. |
| 75 | S&F in repair Plastic water closet seat, white, closed patternhydraulic seat cover for wall hung water closet complete all as specified and directed. Make: Jaquar Cat. No.CNS-WHT-WCS1 or equivalenteries in KOHLER/Roca |
| 76 | Taking down chowkhats or frame with shutter without taking off shutter from the frame n exc 1.50 sqm each & removing from site complete all as specified and directed. |
| 77 | Taking down chowkhats or frame with shutter without taking off shutter from the frame exc 1.50 sqm but not exc 4 sqm each & removing from site complete all as specified and directed. |
| 78 | Taking down shutter of any description n.exc 1 Sqm each & removing from site of work complete all as specified and directed. |
| 79 | Taking down shutter of any description exc 1 Sqm & n. exc 2 Sqm each & removing from site of work complete all as specified and directed. |
| 80 | S&F 2nd class HW plain solid straight chowkhats/frame wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed. |
| 81 | Supply and fixing 2nd class HW 35mm thick plain framed panelled shutters (any number of panels), with panel of timber flats on both sides or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats complete all as specified and directed. |
| 82 | S&F 2nd class HW 30 mm thickGlazed and skeleton window or ventilator shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares(with sash bars any numbers), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats. complete all as specified and directed. |
| 83 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, all as specified. |
| 84 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube all as specified. |
| 85 | S & F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed. |
| 86 | S & F Anodised aluminium window and ventilator shutters, movable (minimum two track) type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, handle , rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed. |
| 87 | S & F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed. |
| 88 | S&F in repairs door closer hydraulically regulated, cast iron body, designation no. 3, universal type, suitable for door shutter of 851 to 1000mm in width and of weight between 61 to 80 kg complete all as specified and as directed. |
