Tender For Repairs To Damaged Flooring Of Danger Building No. 93 And 95 By Antistatic Conductive Epoxy Flooring At Primer Filling Section Inside Factory At Ordnance Factory Varangaon, Varangaon-Maharashtra
TDR : 37040353
Tender Notice
Corrigendum Details
BOQ
Expired
Varangaon
Maharashtra
Corrigendum : Tender For Repairs To Damaged Flooring Of Danger Building No. 93 And 95 By Antistatic Conductive Epoxy Flooring At Primer Filling Section Inside Factory At Ordnance Factory Varangaon
Name of Work: Repairs to damaged flooring of danger building No 93 & 95 by antistatic conductive epoxy flooring at Primer filling section inside factory at OFV.
Sl. No.
Item Description
1
Items :
2
Dismantling wall/floortiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises as per SSR 2020.
3
Dismantaling of reinforced cement concrte in ground floors and pavings n exc 15 cm thickness (reinforcement cut as required to facilitate demolition) and removing excavated material exc. 250 m but n exc. 500 m etc complete as per SSR.
4
Excavating over areas, n exc 1.5 m deep and getting out Removing excavated material exc. 250 m but n exc. 500 m and depositing where directedetc complete as per SSR 2020.
5
M & L, broken stone hardcore of gauge n exc 63 mm deposited, spread & levelled in layers n exc 15 cm thick, watered and rammed with mechanical vibrator to a true surface etc complete as per SSR 2020.
6
Soling or sub base with 200mm & above size broken boulders or quarried stone, interstices filled, surface formed and rolled & consolidated to required gradient and camber etc complete as per SSR 2020.
7
Reinforced cement concrete type B1 1:2:4 (20mm graded) Foundations, including rafts and mass concreteetc completeas per SSR 2020.
8
Formwork to flat sides of concrete in plinth or ground Beams with Rough finish surfaces of concrete etc completeas per SSR 2020.
9
Deformed or twistted mild steel bars 6mm to 8mmdia & over cut to length bent to shape required including crank by bending spirally for hooping for column , hooking ends & binding with steel wire etc complete as per SSR 2020.
10
Taking down & refixing of door shutters in same opening exc 1 sq. m and n exc 2 sq. m each etc complete as per SSR 2020.
11
Rendering 15 mm thick in 1:4 cement mortar on fair faces of brick work & concrete surfaces including neeru finish etc completeas per SSR 2020.
12
Preperation of old untreated surfaces by brooming down, rubbing downincluding filling holes of nails and uneveness by putty & applying two coat of heat & fire resistence paint, as per SSR 2020.
13
Providing and applying 3 mm thick Antistatic conductive Epoxy Floor coating (Electro Static Discharge Coating) which consist of Epoxy Primer, underlay coat, conductive primer, copper grid of 25mm width, 50 to 100 mm microns applied in each 1 sq mt area and surface resistivity which will not exceed 10 Ohms, the cured surface shall be tested with Megohm Meter ESD (Electro Static Discharge) Coating Make:- Krayon, Nagpur Chemicals, ITW Chemin (Devcon) or substantial equivalent as directed by EIC
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
