Indian Oil Corporation Limited-IOCL has published Tender For Construction Of Building For Setting Up Holiday Home. Submission Date for this Tender is 25-04-2023. Building Work Tenders in tirupati Andhra Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | HOLIDAY HOME Tirupati Civil Works |
| 2 | EARTHWORK |
| 3 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms including getting out the excavated soil and disp osal of surplus excavated soil, all works up to any lead and lift, as directed by the Engineer-in-Charge : |
| 4 | In all kinds of soil |
| 5 | Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. |
| 6 | All kinds of soil |
| 7 | Excavating trenches of required width in all kinds of soil for pipes, cables, etc. including excavation for sockets, and dressing ofsides, ramming of bottoms, upto specified depth, including getting out the excavated soil, and then returning the soil as required,in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of su rplus excavated soil, all work up to any lead & lift as directed by the Engineer-in-Charge : |
| 8 | Trench depth upto 1.5m : |
| 9 | Pipes, cables etc. not exceeding 80 mm dia. |
| 10 | Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia |
| 11 | Extra rates for quantities of works, executed in difficult conditions as per following: [Note: The extra percentage rate is applicab le in respect of each item but limited to quantities of work executed in these difficult conditions. The unit, namely, metre depth, to be considered for payment, shall be the depth measured from the sub soil water level upto the centre of gravity of the quantity e xecuted in difficult conditions. The depth shall be reckoned correct to 0.1 metre. 0.05 metre or more shall be taken as 0.1 metre an d less than 0.05 metre ignored.] : |
| 12 | In or under water and/or liquid mud, including pumping out water as required. [Notes: Unit "M" shall mean "PER METRE DEPTH"] |
| 13 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in d epth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5m. |
| 14 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a hei ght of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 15 | Supplying chemical emulsion (Chlorpyriphos/ Lindane emulsifiable concentrate of 20%) in sealed containers including delivery as spec ified. |
| 16 | Diluting and injecting chemical emulsion (Chlorpyriphos/ Lindane E.C. 20% with 1% concentration) for POST-CONSTRUCTIONAL anti-termit e treatment (excluding the cost of chemical emulsion) : |
| 17 | Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling an d plugging holes etc. : |
| 18 | Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 li tres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same : |
| 19 | Supplying and filling selected earth/ moorum (excluding black cotton soil) from Contractor"s own borrow areas including royalty, wit h all leads and lifts in low laying areas and filling to required grade and level including watering, compacting at optimum moisturecontent to 90% of Proctor"s density, consolidation androlling with 8 to 10 tonne power rollerin layers not exceeding 20 cm thic kness, complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. |
| 20 | Providing and laying dry compacted hard base in layers using stone aggregate of 63 mm nominal size over the rammed hard compacted su bgrade (for foundation columns, walls, dykes etc.), including spreading, ramming dry compacting complete in all respects inclusive o f cost of all labour, materials and equipments etc. as per the specifications and direction of the Engineer-in-Charge. |
| 21 | Supplying all labour, materials, tools, chemicals, spray pumps etc. for making pre-constructional anti-termite treatment & creating a continuous chemical barrier under & all round the column pits, wall trenches, top surface of plinth filling, junction of wall & fl oor, along the exterior perimeter of the building, complete in all respects inclusive of cost of all labour, materials, tools, tackl es etc. as per drawings, specifications and direction of Site Engineer. [Note: Total plinth area of the buildingshall be measured for payment]. |
| 22 | CONCRETE WORK : |
| 23 | CEMENT CONCRETE (CAST IN-SITU) : |
| 24 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 25 | 1:2:4 [1 cement : 2 coarse sand (Zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from n atural sources] |
| 26 | 1:4:8 [1 cement : 4 coarse sand (Zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from n atural sources] |
| 27 | CEMENT CONCRETE (PRE-CAST) : |
| 28 | Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in p osition with cement mortar 1:3 (1 Cement : 3 coarse sand), including the cost of required centering, shuttering complete : |
| 29 | 1:1.5:3 [1 cement: 1.5 coarse sand (Zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived fro m natural sources |
| 30 | MISCELLANEOUS CONCRETE WORK : |
| 31 | Extra for laying concrete in or under water and/or liquid mud including cost of pumping or bailing out water and removing slush etc.complete. [Notes: (1) Unit "CUM" shall mean "CUBIC METRE PER METRE DEPTH". (2) The quantity will be calculated by multiplying the d epth measured from the sub-soil water level up to centre of gravity of concrete under sub-soil water level with quantity of concretein cum executed under sub-soil water. (3) The depth of centre of gravity shall be reckoned correct to 0.1 m. (4) 0.05 m or more sha ll be taken as 0.1 m and less than 0.05 m ignored.] |
| 32 | FORM WORK : |
| 33 | Centering and shuttering including strutting, propping etc. and removal of form for all heights : |
| 34 | Foundations, footings, bases of columns, etc. for mass concrete |
| 35 | Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. |
| 36 | Suspended floors, roofs, landings, balconies and access platform |
| 37 | Shelves (Cast in situ) |
| 38 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 39 | Columns, Pillars, Piers, Abutments, Posts and Struts |
| 40 | Stairs, (excluding landings) except spiral-staircases |
| 41 | Small lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anc hor blocks and the like. |
| 42 | Weather shade, Chajjas, corbels, etc. including edges. |
| 43 | STEEL REINFORCEMENT : |
| 44 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete below aswell as above plinth level at all floors |
| 45 | Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 46 | DESIGN MIX CONCRETE : |
| 47 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concr ete work, using coarse aggregate as well as fine aggregate derived from natural sources and cement content as per approved design mi x, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, inc luding admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per directions of the Engineer-in-Charge. [Note : Cement content considered in this item is @ 3 30 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately.] : |
| 48 | All works upto plinth level |
| 49 | All works above plinth level upto floor V level |
| 50 | Extra for providing richer mixes at all floor levels. [Note: Excess/ less cement over the specified cement content used is payable/ recoverable separately] : |
| 51 | Providing M-30 grade concrete instead of M-25 grade BMC/ RMC. [Note: Cement content considered in M-30 is @ 340 Kg/cum] |
| 52 | Add for using extra cement in the items of design mix over and above the specified cement content therein. [Note: Unit "QN" shall me an "QUINTAL"] |
| 53 | MISCELLANEOUS RCC WORK : |
| 54 | Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. |
| 55 | Painting foundation concrete (RCC) with hot bitumen of grade VG-10 @ 17 Kg/10 sqm including cleaning the foundation concrete with br ushes etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. |
| 56 | MASONRY WORK : |
| 57 | Brick work with common burnt clay F.P.S. (non-modular) bricks of class designation 7.5 in superstructure above plinth level up to fl oor V level in all shapes and sizes in : |
| 58 | Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 59 | Providing and laying autoclaved aerated cement blocks masonry with 150 mm/ 230 mm/ 300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive m ortar all complete as per directions of Engineer-in-Charge. [Note: The payment of RCC band and reinforcement shall be made for seper ately]. |
| 60 | CLADDING WORK : |
| 61 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut Granite (of any colour and s hade) for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour an d texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matc hing pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete atall levels : |
| 62 | Area of slab over 0.50 sqm |
| 63 | Providing edge moulding to 18 mm thick Marble/ Granite stone counters, Vanities etc., including machine polishing to edge to give hi gh gloss finish etc. complete as per design approved by the Engineer-in-Charge : |
| 64 | Granite work |
| 65 | Extra for fixing marble/ granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete. |
| 66 | Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar lo cation in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of c ut edges etc. complete. |
| 67 | Providing and fixing cramps of required size & shape in R.C.C./ C.C./ Brick masonry backing with cement mortar 1:2 ( 1 cement : 2 co arse sand), including drilling necessary hole in stones and embedding the cramp in the hole (fastener to be paid separately) : |
| 68 | Stainless Steel cramps |
| 69 | Extra for stone work for wall lining on exterior walls of height more than 10 m from ground level for every additional height of 3 mor part thereof. |
| 70 | TILE WORK IN CLADDING : |
| 71 | Providing and fixing first quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer),of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by the Engineer-in-Charge, inskirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey ce ment slurry @ 3.3 Kg/sq.m., including pointing in white cement mixed with pigment of matching shade complete. |
| 72 | STONE WORK DRY CLADDING |
| 73 | "Providing and fixing dry cladding upto 10 metre heights with 30mm thick gang saw cut stone with machine cut edges of uniform colour and size upto 1mx1m, fixed to structural steel frame work and/ or with the help of cramps, pins etc. and sealing the joints with approved weather sealant as per Architectural drawing and direction of Engineer-in-charge. (The steel frame work, stainless steel cramps and pins etc. shall be paid for separately)." |
| 74 | White sand stone - 30mm thick gang saw cut stone |
| 75 | "Providing and fixing structural steel frame (for dry cladding with 30 mm thick gang saw cut with machine cut edges sand stone) on walls at all heights using M.S. square/ rectangular tube in the required pattern as per architectural drawing, including cost of cutting, bending, welding etc. The frame work shall be fixed to the wall with the help of M.S. brackets/ lugs of angle iron/ flats etc. which shall be welded to the frame and embedded in brick wall with cement concrete block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) of size 300x230x300 mm, including cost of necessary centring and shuttering and with approved expansion hold fasteners on CC/RCC surface, including drilling necessary holes. Approved cramps/ pins etc. shall be welded to the frame work to support stone cladding, the steel work will be given a priming coat of Zinc primer as approved by Engineerin-charge and painted with two or more coats of epoxy paint (Shop drawings shall be submitted by the contractor to the Engineer-in-charge for approval before execution). The frame work shall be fixed in true horizontal & vertical lines/planes. (Only structural steel frame work shall be measured for the purpose of payment, stainless steel cramps shall be paid for separately and nothing extra shall be paid)." |
| 76 | "Providing & fixing in position Phenol bonded Bamboowood wall cladding at all height with planks of sizes 10mm thick, minimum 1800mmlength and minimum 100 mm wide, in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Bu ilding Materials & Technology Promotion Council (BMTPC), with necesasary profiled edges fixed with 40mm SS screws 5 nos in each tileto frame work made of second class teak wood of size 20x15 mm in centre of each tile and bottom and top of work height, 40x15mm pla ced at ends of each tile. The cladding shall be laid over backlayment of 1.00 mm thick expanded polyethylene foam of density 40kg/cum in two layers, first layer on wall surface before fixing wooden frame and second layer on frame under cladding. The bamboowood planks shall have minimum density of 1000 Kg/cum & minimum Hardness 1000 Kgf. with Eco friendly UV coating, all compl ete as per direction of the Engineer in-charge" |
| 77 | WOOD & PVC WORK : |
| 78 | FRAMES AND TRUSSES : |
| 79 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with holdfast lugs or with dash fasteners of required diameter & length [Note: Hold fast lugs or Dash fasteners shall be paid separately und er relevant item of SOR] : |
| 80 | Second class teak wood |
| 81 | Providing and fixing ISI marked flush door shutters conforming to IS:2202 (Part I) decorative type, core of block board constructionwith frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on bot h faces of shutters : |
| 82 | 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 83 | Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). |
| 84 | MISCELLANEOUS-WOOD WORK : |
| 85 | Providing and fixing chromium plated brass curtain rods having wall thickness of 1.25 mm with two chromium plated brass brackets fix ed with C.P. brass screws and PVC sleeves etc., wherever necessary complete : |
| 86 | 25 mm dia. |
| 87 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embe dding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). |
| 88 | STAINLESS STEEL FITTINGS : |
| 89 | Providing and fixing bright finished brass 100 mm mortice latch with one dead bolt and a pair of lever handles of approved quality w ith necessary screws etc. complete. |
| 90 | Providing and fixing bright finished brass night latch of approved quality including necessary screws etc. complete. |
| 91 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. |
| 92 | Providing and fixing in position built-up cupboard, internal framework, shelves, drawers, layon slides partitions and shutters 19 mmthick pre-laminated block boardof BWP Grade, Decorative Type (BWP-DEC) of approved quality or equivalent stamped with IS-1659:200 4 (Latest Edition) and pre-lamination should conform to IS-2046:1995 (Latest Edition) and 3 mm thick teak wood lipping at all edges of the board with polish/ enamel paint fixed with water resistant adhesive on inside and external face as per approved shade includi ng piano type hinges 19x25 mm, best quality teak wood lipping around the shutter edges, 20 mm diameter chrome plated M.S. coat hange r rod, magnetic ball catchers, brass tower bolt, knobs, handles with S.S. roses 150 mm x 19 mm diameter (Ref. Make - DORSER, Model -IP 06 PR SS or approved equivalent) complete as per drawing including spirit polishing/ enamel painted on lipping in required shadematching to the laminate etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawi ngs, specifications and direction of the Engineer-in-Charge. (Measurement of cupboard shall be taken as front area of shutters only) : For room wardrobes. |
| 93 | Providing and fixing in position for crockery case made of internal framework, shelves, drawers, layon slides partitions and shutter s with 19 mm thick pre-laminated block board of BWP Grade, Decorative Type (BWP-DEC) of approved quality or equivalent stamped with IS-1659:2004 (Latest Edition) and pre-lamination should conform to IS-2046:1995 (Latest Edition) including piano type hinges (19x25 mm), best quality teak wood lipping around the shutter edges, magnetic ball catchers, brass tower bolt, knobs, handles with S.S. ros es 150mm x 19mm diameter (Ref. Make - DORSET, Model - IP 06 PR SS or approved equivalent), spirit polishing/ enamel painting on lipp ing in required shade matching to the laminate etc. complete in all respects inclusive of cost of all labour, materials, tools, tack les etc. as per drawings, specifications and directions of the Engineer-in-Charge. (Measurement of cupboard shall be taken as front area of shutters only). |
| 94 | Providing and fixing stainless steel finished pull handle with roses of following size & type complete as per design and directions of the Engineer-in-Charge : |
| 95 | Pull handle with S.S. roses 200mm x 19mm diameter. (Ref. Make: DORSET, Model: IP 08 PR SS or approved equivalent) |
| 96 | Pull handle with S.S. roses 150mm x 19mm diameter. (Ref. Make: DORSET, Model: IP 06 PR SS or approved equivalent) |
| 97 | Providing and fixing approved stainless steel finished tower bolts (barrel type) 10 mm diameter & 200 mm long with screws etc. compl ete as per drawings, specification and directions of the Engineer-in-Charge. |
| 98 | Providing and fixing magic eye piece in front door with necessary screws etc. complete in all respects inclusive of cost of all labo ur, materials, tools, tackles, etc. as per drawings, specifications and directions of the Engineer-in-Charge. |
| 99 | Providing and fixing heavy duty concealed type aluminium alloy hydraulic door closer of "DOORKING" or approved equivalent make & qua lity with necessary accessories, screws etc. and matching colour plate complete in all respects inclusive of cost of all labour, mat erials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. |
| 100 | "Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered f rame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel sectio n made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropr iate dimension, EPDM Gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc.Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded inc luding drilling of holes for fixing hardware"s and drainage of water etc. After fixing frame the gap between frame and adjacent fini shed wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately ). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be ac ceptable" |
| 101 | Casement window single panel with S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series)frame 67 x 60 mm & sash 67 x 80 mm bo th having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window abo ve 0.75 sqm.) |
| 102 | "Providing and fixing factory made uPVC white colour fixed glazed windows/ ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from rol l forming process of required length (shape & size according to uPVC profile), , uPVC extruded glazing beads of appropriate dimensio n, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainle ss steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusi on welded including drilling of holes for fixing hardware"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge.(Single / double glass panes and silicon sealant shall be pai d separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be a cceptable." |
| 103 | Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm an d single glazing bead of appropriate dimension. (Area upto 0.75 sqm.) |
| 104 | "Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi- chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steelsection made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC e xtruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to f inished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners,including drilling of holes for fixing hardware"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all compl ete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made . Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable ." |
| 105 | Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big serie s) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of a ppropriate dimension. (Area of window above 1.75 sqm). |
| 106 | "Providing and fixing factory made uPVC white colour sliding glazed door comprising of uPVC multi-chambered frame with in-built roll er track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming pr ocess of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc al loy (white powder coated) cresent lock (if required), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weig ht bearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel scr ews etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardwa re"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather pro of silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid se parately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable ." |
| 107 | Three track three panels sliding door with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series)frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of app ropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm) |
| 108 | Providing and fixing double glazed hermetically sealed glazing in aluminium / UPVC windows, ventilators and partition etc. with 6 mmthick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants,sealant (both primary and secondary sealant) etc. as per specifications, drawings and directions of the Engineer-in-Charge complete . |
| 109 | STEEL WORK : |
| 110 | Providing and fixing carbon steel galvanised (minimum coating 5 micron) dash fastener of 10 mm dia. double threaded 6.8 Grade (YieldStrength 480 N/sq.mm.), counter sunk head, comprising of 10 m dia. Polyamide PA 6 Grade sleeve, including drilling of hole in frame, concrete/ masonry, etc. as per the directions of Engineer-in-Charge : |
| 111 | 10x120 mm |
| 112 | Supplying, fabricating, erecting, placing and fixing in position M.S. structural works using rolled/ built up sections for truss, cl addings, bracings, purlins, supporting frames made of joists, tubes, pipes, channels, angles, plates, flats, bars etc. including cut ting to required size welding of joints, fixing anchor plates, including bolts, theading, nuts, washers, sleeves etc. includingpre paration of detailed fabrication drawings & submission to the Engineer-in-Charge for approval before start of fabrication, supplying& applying painting with two coats of epoxy paint "EPILUX 155 High Build Enamel over a coat of "EPILUX 610" Primer of M/s BERGER orany other approved equivalent make as per manufacturer’s recommendation, complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. (Excluding the cost of conc rete work). |
| 113 | FLOORING : |
| 114 | TILE FLOORING : |
| 115 | Providing and laying machine cut, mirror polished, 18 mm thick Italian Marble Stone slab (Perlato, Rosso verona, Fire Red or Dark Em peradore, etc.) flooring laid in required pattern in linear portion of the building all complete as per architectural drawings, with18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with w hite cement slurry @ 4.4 Kg/sq.m., including pointing with white cement slurry admixed with pigment to match the marble shade includ ing rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. |
| 116 | GRANITE STONE FLOORING : |
| 117 | Providing and laying Polished Granite stone slab (Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent) flooring in required de sign and patterns, in linear as well as curvilinear portions of the building, all complete as per the architectural drawings, with 1 8 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand), laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing and polishing etc. al l complete as specified and as directed by the Engineer-in-Charge. |
| 118 | VITRIFIED FLOOR TILES : |
| 119 | Providing and laying Double Charge Vitrified Tiles (polished finish) of specified sizes (thickness to be specified by the Manufactur er) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacture, in all colours and shades, la id on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 Kg/sqm including grouting thejoints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of til es will be done with the notch trowel, plier, wedge, clips of required thickness, levelling system and rubber mallet for placing thetiles gently and easily : |
| 120 | Size of Tile 800 x 800 mm |
| 121 | Size of Tile 1000 x 1000 mm |
| 122 | Providing and laying Glazed Vitrified Tiles (Matt/ Antiskid finish) of specified sizes (thickness to be specified by the Manufacture r) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacture, in all colours and shades, lai d on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 Kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tile s will be done with the notch trowel, plier, wedge, clips of required thickness, levelling system and rubber mallet for placing the tiles gently and easily : |
| 123 | Size of Tile 600 x 600 mm |
| 124 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than0.08 % and conforming to IS:15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of c ement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 Kg/sq.m. including grouting the joint with white cement & matching pigments etc. complete : |
| 125 | Size of Tile 600x600 mm |
| 126 | Size of Tile 800x800 mm |
| 127 | Size of Tile 1000x1000 mm |
| 128 | Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 Kg of organic coated filler of desi red shade (0.10 Kg of hardener and 0.20 Kg of resin per Kg), including filling/ grouting and finishing complete as per directions ofthe Engineer-in-Charge : |
| 129 | Size of Tile 600x600 mm |
| 130 | Size of Tile 800x800 mm |
| 131 | Size of Tile 1000x1000 mm |
| 132 | OTHER FLOORING WORKS : |
| 133 | Providing and fixing Glass mossaic tiles on finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design , fixing in approved design. The glass mosaic tiles shall be fixed on the wall surface with the help of approved adhesive applied at the rateof 2.5 Kg/sq.m. and grouting of the same. All complete as per the directions of Engineer-in-Charge. |
| 134 | ROOFING & CEILING : |
| 135 | Providing gola 75x75 mm (in 75x75 mm deep chase) in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and do wn gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design. |
| 136 | FALSE CEILING : |
| 137 | Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595x595 mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanised steel sections (g alvanising @ 120 grams/sq.m. including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length andof size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross "T" of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main "T" at 600 mm centre to centre to form a grid of 1200x600 mm and second ary cross "T" of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be interlocked at middle of the 1200x 600mm panel to from grid of size 600x600 mm, resting on periphery walls/ partitions on a Perimeter wall angle pre-coated steel of size24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wallscrews @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, inc luding cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever require d. Main "T" runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia an d 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85x30x0.8 mm, spaced at 1200 mm cen tre to centre along main "T", bottom exposed with 24 mm of all "T" sections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by the Engineer-in-Charge. [Note: Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/ opening (cut outs) having area less than 0.30 sqm . The calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection > 85%, non-combustible as per B.S. 476 (Part-IV), 100% humidity resistance and also having thermal conductivity < 0.043 w/mK.] |
| 138 | Providing and fixing G.l. clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing "C" wall angle of si ze 20x30x20 mm made of 0.5 mm thick pre-painted steel along the perimeter of the room with help of nylon sleeves and wooden screws a t 300 mm center to centre, suspending the main "C" carrier of size 10x38x10 mm made of G.I steel 0.7 mm thick from the soffit with h elp of soffit cleat 37x27x25x1.6 mm, rawl plugs of size 38x12 mm and "C" carrier suspension clip and main carrier bracket at 1000 mmcentre to centre. Inverted triangle shaped Spring Tee having height of 24 mm and width of 34 mm made of G.l. steel 0.45 mm thick isthen fixed to the main "C" carrier and in direction perpendicular to it at 600 mm centers with help of suspension brackets. Whereve r the main "C" carrier and spring "T" have to join, "C" carrier and spring "T" connectors have to be used. All sections to be galvan ized @ 120 gms/sq.m. (both side inclusive), fixing with clip in tiles into spring "T" with : |
| 139 | G.I. Metal Ceiling Clip in plain Beveled edge global white color tiles of size 600x600 mm and 0.5 mm thick with 25 mm height, made o f G.I. sheet having galvanizing of 100 gms/sq.m. (both sides inclusive) and 20% perforation area with 1.8 mm dia. holes and having N RC of 0.5, electro-statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending andperforation. |
| 140 | Providing and fixing of Acoustical Suspended Ceiling System at all heights 600 mm x 600 mm x 15 mm with Tegular Edged Tiles having r eal sandon the front face, the back of the tiles should have duly sanded and finished with a coat of protective coating on exposed g rid system. (a) Main Runner : To comprises main runner T-shaped section with single rotary stiching made of G.S. sheet and of size 2 4 mm x 32 mm and 3600 mm long spaced at 1200 mm centres securely fixed to the structural sockets by approved hanger at 1200 mm maxim um center. (b) Cross Runners : T-shaped with double rotary stitching made of G.S. sheet and of 24 mm x 27 mm and 1200 mm long and ofsize 24 mm x 25 mm and 600 mm long. The last hanger at the end of each main runner should not be greater than 450 mm from the adjac ent wall. (c) Perimeter Trim : Wall angles or channel, made from 0.45 mm thick G.S. sheet and of size 22 mm x 22 mm and 3600 mm long , white colour secured to walls at 450 mm maximum center. The specification of the tiles should be Humidity Resistance RH99, Fire Pe rformance Class 0/Class-I (BS:476), Noise Reduction Coefficient (NRC) 0.5 (Average), Sound Attenuation 34 dB, Light Reflectance 85%,Thermal Conductivity 0.052-0.057 w/m degree, Acoustical Punchers 24000 sm (10 mm deep) complete as per specifications and direction s of the Engineer-in-Charge. |
| 141 | "Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power press ed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cl eats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flang e of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling s ection 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, sha ll be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G. I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the peri meter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm inter val, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush fi nish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compoundin 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer"s specification and also including the cost of making openings for light fittings , grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and d irection of the Engineer in Charge but excluding the cost of painting with :" |
| 142 | "12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks)" |
| 143 | Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratioof 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbi ng and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in thesame manner. |
| 144 | FINISHING |
| 145 | CEMENT PLASTER (IN FINE SAND) : |
| 146 | 12 mm cement plaster of mix : |
| 147 | 1:4 (1 cement : 4 fine sand) |
| 148 | CEMENT PLASTER IN TWO COATS : |
| 149 | 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick c ement plaster 1:3 (1 cement : 3 coarse sand) finished rough with sponge. |
| 150 | 6 MM CEMENT PLASTER : |
| 151 | 6 mm cement plaster of mix 1:3 (1 cement : 3 fine sand) |
| 152 | MISCELLANEOUS PLASTER WORK : |
| 153 | Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof. |
| 154 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth comple te. |
| 155 | Providing & fixing galvanized chicken wire net 20 Gauge, 20 mm mesh size in plastering work at the junction of RCC Columns/ Beams & brickwork as directed by the Engineer-in-Charge. |
| 156 | INTERIOR FINISHING : |
| 157 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : |
| 158 | New work (two or more coats) over and including water thinnable priming coat with cement primer. |
| 159 | EXTERIOR FINISHING : |
| 160 | Finishing walls with textured exterior paint of required shade : |
| 161 | New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm |
| 162 | Finishing walls with Acrylic Smooth exterior paint of required shade : |
| 163 | New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 164 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : |
| 165 | Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr/10 sqm |
| 166 | French spirit polishing : |
| 167 | Two or more coats on new works including a coat of wood filler. |
| 168 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wa ll surface to prepare the surface even and smooth complete. |
| 169 | Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, blac k finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of me mbrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemi cal parameters of the membrane shall be as under : (a) Joint strength in longitudinal and transverse direction at 23°C as 650/450N/5 cm. (b) Tear strength in longitudinal and transverse direction as 300/250N. (c) Softening point of membrane not less than 150°C. (d)Cold flexibility shall be up to -2°C when tested in accordance with ASTM, D-5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane. |
| 170 | Disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, tr ansporting, unloading to approved municipal dumping ground or as approved by the Engineer-in-Charge, beyond 50 m initial lead, for a ll leads including all lifts involved. |
| 171 | ROAD WORK : |
| 172 | Preparation and consolidation of sub-grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the s ub grade and disposal of surplus earth with lead up to 50 metres. |
| 173 | Extra for compaction of earth work in embankment under optimum moisture conditions to give at least 95% of the maximum dry density ( proctor density). |
| 174 | Providing and laying design mix cement concrete of M-30 grade in roads/ taxi tracks/ runways, using cement content as per design mix , using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design c riteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by usin g needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work withsturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints (10 mm wide x50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per di rection of the Engineer-in-Charge. [Notes: (1) Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separate ly. (2) Cement content considered in M-30 is @ 340 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separa tely]. |
| 175 | Cement concrete prepared with batch mixing machine |
| 176 | ROAD SIGNS & ACCESSORIES : |
| 177 | Providing Retro-reflective regulatory sign board of size 900 mm dia meter made out of 2 mm thick aluminium sheet, face to be fully c overed with high intensity encapsulated lens type retro-reflective sheeting as approved by the Engineer-in-Charge. Letter, symbols, borders etc. will be as per IRC:67 with required colour scheme on the boards and with the high intensity Grade-A. The aluminium shee t to be riveted to M.S. frame of angle iron of size 40x40x4 mm. The boards will be fixed to 1 No. 50x50 mm square post made of M.S. angle 50x50x4 mm, 4 m long welded to the frame with adequate anti-theft arrangement .Sheet work to be painted with two or more coatsof synthetic enamel paint over an under coat (primer) and back side of aluminium sheet to be painted with two or more coats of epox y paint including appropriate priming coat complete in all respects as per directions of the Engineer-in-Charge. |
| 178 | Providing and applying 2.5 mm thick road marking strips (retro-reflective) of specified shade/ colour using hot thermoplastic materi al by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank hea ter and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the ro ad surface of all dirt, seals, oil, grease and foreign material etc. complete as per directions of the Engineer-in-Charge and accord ance with applicable specifications. |
| 179 | MISCELLANEOUS : |
| 180 | Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm) to wet mix macadam (WMM) specifica tion including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paverfini sher in sub-base/ base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve thedesired density, complete as per specifications and directions of the Engineer-in-Charge. |
| 181 | Construction of dry lean cement concrete sub-base over a prepared sub-grade with coarse and fine aggregate conforming to IS:383, thesize of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be a s per specifications, cement content not to be less than 150 Kg/cum, optimum moisture content to be determined during trial length c onstruction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, for all leads &lifts, laid with a mechanical paver, compacting with 8-10 tonne vibratory roller, finishing and curing etc. complete as per directi ons of the Engineer-in-Charge. |
| 182 | Providing, laying and making kerb channel 30 cm wide and 50 mm thick with cement concrete 1:3:6 (1 cement: 3 coarse sand:6 graded st one aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted wi th fine sand, including finishing the top smooth etc. complete and as per directions of the Engineer-in-Charge. |
| 183 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line,level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thi ckness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc . as per directions of the Engineer-in-Charge. [Notes: (1) Length of finished kerb edging shall be measured for payment. (2) PrecastC.C. kerb stones shall be approved by the Engineer-in-Charge.] |
| 184 | ALUMINIUM WORKS |
| 185 | Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod ofapproved quality as per architectural drawings and directions of the Engineer-in-Charge complete : |
| 186 | Up to 5 mm depth and 5 mm width |
| 187 | Providing and fixing Anodised Aluminium grill (Anodised transparent or dyed to required shade according to IS:1868 with minimum anod ic coating of grade AC-15) of approved design/ pattern, with approved standard section and fixed to the existing window frame with C .P. Brass/ Stainless Steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and opera tion of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and dire ctions of the Engineer-in-Charge. [Note: Only weight of grill to be measured for payment]. |
| 188 | Providing and fixing sensor based sliding glass door system of approved make for main entrance door of size 2.0m x 2.4m, comprising of D.C. Motor controller, transmission belt, aluminum profile, sensor and necessary accessories including 10mm thick toughened glasswith required framing, fittings, accessories etc.complete in all respect as per manufacturer"s specifications, drawings and direc tions of the Engineer-in-Charge. |
| 189 | WATERPROOFING : |
| 190 | Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the lik e consisting of : (a)First course of applying cement slurry @ 4.4 Kg/sqm mixed with water proofing compound conforming to IS:2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (b) Second course of 20 mm cement pla ster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (c) Third course of applying blown or residual bitumen applied hot at 1.7 Kg/ sqm of area. (d) Four th course of 400 micron thick PVC sheet. [Note: Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/sqm]. |
| 191 | Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) After surface preparation, first layer of slurry of cement @ 0.488 Kg/sqm mixed with water proofing cem ent compound @ 0.253 Kg/sqm. (b) Laying second layer of fibre glass cloth when the first layer is still green. Overlaps of joints offibre cloth should not be less than 10 cm. (c) Third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 Kg/sqm mixed with water proofing cement compound @ 0.670 Kg/sqm and coarse sand @ 1.289 Kg/sqm. This will be allowed to air cure for 4 hours foll owed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet a ll around. (d) Fourth and final layer of brick tiling with cement mortar (which will be paid for separately). For the purpose of mea surement the entire treated surface will be measured. |
| 192 | Grading roof for water proofing treatment with : |
| 193 | Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 194 | Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like r etaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels/ subway and bri dge deck etc., prepared by mixing in the ratio of 5:2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces an d 3:1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) si de with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressur e on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be car ried out all complete as per specification and directions of the Engineer-in-Charge. The product performance shall carry guaranteed for 10 years against any leakage : |
| 195 | For vertical surface two coats @ 0.70 kg per sqm per coat |
| 196 | For horizontal surface one coat @ 1.10 kg per sqm |
| 197 | GENERAL WORKS : |
| 198 | Providing and making Construction/ Contraction joint by mechanically cutting 12mm x 25mm deep groove and filling with bituminous sea ling compound including cleaning etc. complete as per drawing, specifications and directions of the Engineer-in-Charge. |
| 199 | Providing and fixing of graphics/ signages (including printing of direction, entry, exit, department name, etc.) with self glowing/ back lit signs 12"x6" as per specification and directions of the Engineer-in-Charge. |
| 200 | Providing barricading of 3.0 m height made of 1mm thick G.S. corrugated sheet with steel angle post (ISA65x65x6) at every 1.5 m inte rval and steel angle bracings (ISA 50x50x6) at every 3.0m interval, embeding posts in cement concrete (1:2:4) padestals of size 450m m x 450mm x 750mm), providing necessary bolts, nuts, fixing, etc. including painting of steel sheet and angles with two coats of alu minium/ synthetic enamel paint over a coat of red oxide zinc chrome primer, inclusive of cost of all labour, material, tools, tackle s, etc. complete in all respects as per drawing, specifications and directions of the Engineer-in-Charge. [Note: This item shall be operated under specific approval of the Engineer-in-Charge]. |
| 201 | Providing and fixing Scaffolding net of required width made of high density Polyethylene UV stabilized knitted on warp knitting mach ines having density 100 gm/sqm and shading coefficient minimum 75% around the construction site/ for vertical extension as per requi rement including fastening/ tying with building/ scaffolding pipes or with any other fixtures etc. complete as per directions of theEngineer-in-Charge. [Note: One time payment shall be made for providing Scaffolding net from start of work till completion of work including shifting if any. The Scaffolding net shall be the property of the Contractor on completion of the work]. |
| 202 | HORTICULTURE & LANDSCAPING : |
| 203 | Supplying and stacking of good earth at site including royalty and carriage up to any lead complete. [Note: Volume of earth measuredin stacks will be reduced by 20% for payment]. |
| 204 | Supplying and stacking of well decayed cattle manure at site including royalty and carriage up to any lead complete. [Note: Volume o f cattle manure measured in stacks will reduced by 8% for payment]. |
| 205 | Spreading of sludge, dump manure and/or good earth in required thickness including removal of debris/ un-wanted material, consolidat ion, dressing, levelling and watering etc. complete as per directions of the Engineer-in-Charge. [Note: Cost of sludge, dump manure and/or good earth shall be paid separately under relevant item of SOR]. |
| 206 | Providing and laying Neelgiri/ Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level an d ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning w ith sprinkler and maintenance for 30 days or more till the grass establish properly, complete as per direction of the Engineer-in-Ch arge. |
| 207 | Plantation of Trees, Shrubs and Hedges at site including watering and removal of unserviceable materials as per direction of the Eng ineer-in-Charge (excluding cost of plant & water): |
| 208 | Tree Plant |
| 209 | Shrub Plant |
| 210 | Hedge Plant/ Ground Cover |
| 211 | Supply and planting sapling (not less than 45 cm in height and 60 cm centre to centre) of Casurina, Labrum, Gulmohar, Ashokas, Bottl e Palm, Bougenvilla, Hibiscus, Roses or other approved type of variety of plants, watering & maintenance for 30 days minimum complet e in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per specifications and directions of the Engine er-in-Charge. |
| 212 | Providing and fixing M.S. flat iron tree guard 60 cm dia and 2.0 m high, above ground consisting 4 Nos. 25x6 mm, 2.25 m long and 8 N os 25x3 mm, 2.0 m long vertical M.S. flats, riveted to 3 nos 25x6 mm M.S. flat iron rings in two halves, fixing together at site wit h required six numbers of 8 mm dia and 30 mm long bolts, including painting two coats with synthetic enamel paint of approved brand and manufacture over a coat of primer. One name plate of 1 mm thick M.S. sheet of size 250x100 mm shall be welded to the tree guard near the middle height and lettered IOCL or any other approved name. The tree guard shall be suitably fixed to the ground by embeddi ng four legs of tree guard in pits of suitable dia and to a depth of 25 cm, refilling the pits with soil and ramming, complete in al l respect as per satisfaction and direction of the Engineer-in-Charge. |
| 213 | Providing & fixing of White River (Stone) Pebbles size of 2" to 2.50" dia in natural colour at site of work including loading, unloa ding, carriage and all taxes paid etc.and as per directions of the Engineer-in-Charge. |
| 214 | MISC ITEMS |
| 215 | "Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shopdrawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of ex truded aluminium frame work. Nothing extra shall be paid on this account). The weight of aluminium extruded section shall be taken f or purpose of payment." |
| 216 | "Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (w ith open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including: (a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, sc rews, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)- cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire haza rd including: (b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5 brackets of required sizes, sections andprofiles etc. to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/structural steel framework of building structure using stainless steel anchor fasteners/ bolts, n ylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers." |
| 217 | "Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment, including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass.(d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building str ucture and all its interfaces with curtain glazing to make it watertight. (e) Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporating principles of pressure equalization, providing suitable gu tter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc. complete. This item includes cost of all inputs of designing, labour for fabricating and installation of aluminium grid, installation of glaze d units, T&P, scaffolding and other incidental charges including wastages etc., enabling temporary structures and services, cranes o r cradles etc. as described above and as specified. The item includes the cost of getting all the structural and functional design i ncluding shop drawings checked by a structural designer, dully approved by Engineer-in-charge. The item also includes the cost of all mock ups at site, cost of all samp les of the individual components for testing in an approved laboratory, field tests on the assembled working structural glazing as specified, cleaning and protection till the handing over of the building for occupation. In the end, the Contractor shallprovide a water tight structural glazing having all the performance characteristics etc. all complete as required, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engi neer- in-Charge." |
| 218 | "Note:- 1. The cost of providing extruded aluminium frames, shadow boxes, extruded aluminium section capping for fixing in the groov es of the curtain glazing and vermin proof stainless steel wire mesh shall be paid for separately under relevant items under this sub- head. However, for the purpose of payment, only the actual area of structural glazing (including width of groo ves) on the external face shall be measured in sqm. up to two decimal places. Note:-2. The following performance test are to be conducted on structural glazing system if area of structural glazing exceeds 2500 Sqm from the certified laboratories accreditated by NABL(National Accreditation Board for Testing and Calibration Laboratories), Department of Science & Technologies, I ndia. Cost of testing is payable separately." |
| 219 | "The NIT approving authority will decide the necessity of testing on the basis of cost of the work, cost of the test and importance of the work. Performance Testing of Structural glazing system Tests to be conducted in the NABL accredited lab or any other accredit ation body which operates in accordance with ISO/ IEC 17011 and accredits labs as per ISO/IEC 17025 1. Performance Laboratory Test f or Air Leakage Test (-50pa to - 300pa) & (+50pa to +300pa) as per ASTM E-283-04 testing method for a range of testing limit 1 to 200 mVhr 2. Static Water Penetration Test. (50pa to 1500pa) as per ASTME- 331-09 te sting method for a range up to 2000 ml. 3. Dynamic Water Penetration (50pa to 1500pa) as per AAMA 501.01- 05 testing method for a range upto 2000 ml 4. Structural Performance Deflection and deformation by static air pressure test (1.5 times design wind pressure without any failure) as per ASTME -330-10 testing method for a range upto 50 mm 5. Seismic Movement Test (upto 30 mm) as per AAMA 501.4-09 testing method for Qualitat ive test, Tests to be conducted on site. 6. Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 m l" |
| 220 | "Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (doubleglazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm th ick, of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade, an inner Heat strengthne d clear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. allcomplete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as d irected by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor. (Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.25.2) For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm." |
| 221 | (i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 1 5%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properti es of performance glass shall be decided by technical sanctioning authority as per the site requirement. |
| 222 | Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardware s for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cre mone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bo lts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed bythe Engineer- in-Charge. |
| 223 | "Providing and fixing factory made single extruded exterior grade WPC (Wood Polymer Composite) solid board one side white color and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesiveetc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/ mm2, modulusof elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinge s of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. Fixing on M.S (mild steel) frame madeof 25 x 25 x 1.5 mm square hollow box section including applying a primingcoat of approved steel primer, placed at grid made at 1.0 x 1.0 m or as per requirement at site with necessary stainless steel fast eners and SS screws etc., all complete as per direction of Engineer-In- Charge. (Note: M.S (mild steel) framework with priming coat and necessary SS fasteners and SS screws shall be paid separately." |
| 224 | 25MM THK |
| 225 | "Providing and fixing factory made 18 mm thick single extruded WPC (Wood Polymer Composite) solid plain white colour board Jali, CNC(Computer numeric control) routed of approved design by Engineer-in -charge which are machine cut for duct/ shaft covering, partiti ons and facades comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium corbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and sc rew withdrawal strength of 1800 N (Face) minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to sp read of flame of Class A category with properties of being termite/borer proof, water/moisture proof and fire retardant and fixing o n M.S (mild steel) frame madeof 25 x 25 x 1.5 mm square hollow box section including applying a priming coat of approved steel prime r, placed at grid made at 1.0 x 1.0 m or as per requirement at site with necessary stainless steel fasteners and SS screws etc., allcomplete as per direction of Engineer-In- Charge. (Note: M.S (mild steel) framework with priming coat and necessary SS fasteners and SS screws shall be paid separately." |
| 226 | Designing, providing, fabricating, transporting and fixing in position sandwich PUF (Poly Urethane Foam) insulated panels (Insulatin g Material Core thickness-50 mm & Density 40 Kg/cum) for Roofing and Wall cladding of pre-engineered buildings including fixing nece ssary flashing, etc. complete as per Technical Specifications. |
| 227 | Applying breathable, non-reactive, antifungal, and water repellant Silane/Siloxane chemical as approved by Archaeological Survey of India/ Engineer-in-charge, of approved brand and manufacture, diluted with solvent mineral Turpentine oil in the ratio of 1:12 (One part of approved chemical :12 Part of Turpentine oil), on the existing sand stone masonry surface with two or more coats to give uni form application of chemical on the surface, all complete as per direction of Engineer-In-charge |
| 228 | "Constructing brick masonry Septic Tank with brickwork in cement mortar 1:6 including R.C.C. 1:2:4 (1 cement : 2 sand : 4 graded coa rse aggregate) top slab, C.I. cover all as per standard drawing, etc. complete in all respects inclusive of cost of all materials, l abour, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge : a. For 50 Users" |
| 229 | "Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm dia meter, 1.8 m long complete as per standard design : a. With common burnt clay F.P.S. (Non-modular) bricks of class designation 7.5" |
| 230 | Providing and fixing of Motorized telescopic two equal leaf sliding MS gate (total clear width 6mtr & overall width 8mtrs & 1.8 mtr height) sliding on one side duly finished with 1 coat of epoxy primer along with two coats of epoxy paint along with accessories suc h as electromechanical actuator , three station push button, pair of photocells with anodised aluminium vertical mountings, bottom r ail & flashing light etc complete in all respects including cabling/wiring from security post/ nearest point as per requirement. MS framework shall be as per drawing enclosed /GFC drawing with any amendments, if any. Any accessory not mentioned above but required for proper functioning of Gate shall be deemed to be included in the quote by bidder and nothing extra shall be payable. |
| 231 | Supply, installation, testing and commissioning of 6mtr clear long boom barrier of model : Securo Plus 6C of Gandhi Automation /equi lavent in Avians/ID TECHsingle sided operation with three station push button, LED lightening system with variable flashing, pair of photocells with anodised aluminium vertical mountings and fixed support etc complete in all respects. Any accessory not mentionedabove but required for proper functioning of Gate shall be deemed to be included in the quote by bidder and nothing extra shall be payable. |
| 232 | Providing and fixing of 1200 mm high balcony railing with Stainless steel 304 grade profiles such as SR-25 S BASE , SS Handrail 42MM(1.5MM THICK), Wall concealed 42mm, Modular $ Bend 42mm, of Make :- S-Grip or equilavent in Technorailalong with 12mm thick cleartoughened glass ,all accessories such as fasteners, weatherproof clear silicone etc complete in all respects including transportati on, installation, wastage, taxes, profits etc. |
| 233 | Providing and fixing of staricase railing (Clear 900mm High)with stainless steel 304 grade profiles such as SGS HR 42 (1.5mm wall th ickness) - Handrail, SGS BH 2020 (Bottom Spigot),SGS AWC 42 SL wall concealed, SGS AGB 1212 (Glass to Handrail Bracket), SGS AMPS 42 (Main Post)of Make :- S-Grip or equilavent in Technorailalong with 12mm thick clear toughened glass ,all accessories such as fa steners, weatherproof clear silicone, bonding chemicaletc complete in all respects including transportation, installation, wastage , taxes, profits etc. |
| 234 | Providing and Fixing channelled wooden panelling/false ceiling (Make:- Anutone/Armstrong) of perforated panels of minimum thickness of 15mm , standard length 2400 mm, 125 mm or as per site , made of a high density fibre board with minimum NRC value of 0.55, minimu m density of 800 Kg/M3 density substrate with a laminated facing / wood veneer as per the approved shade/ species & finish and a mel amine balancing layer on the reverse side. The boards shall have a perforation pattern perforation of 2mm & width of minimum 14mm ofvisible panel each. The panels shall provide a fire reaction of Class of 1 as per Part 7 of BS 476. The panels shall be “tongue-and -grooved or interlocking” with each other for intermediate fixing & suitable approved coloure powder coated aluminium beading/mouldi ng at ends, top as per site requirement. The back of the perforated panel shall have sound absorbing non-woven acoustical fleece . T he panels shall be mounted using aluminium splines/channels using clips-section of appropriate size as per recommendation by manufac turer & Engineer-in-Charge.Suitable GI hangers of 8mm diaalong with fasterners shall be used for hanging of panels. |
| 235 | Supply & installation of 12mm thick fixed toughened glassin glazingwith (Patch fitting make :- dormakaba Crown series/equivalentin Geze)Wall Connecting Profileincl of clamping parts with screws and gasketfor 12 mm glass with SS cover profile on both sid e having std lenth of3000mm x40mm x32 mm,Finish : SS , The Wall Connecting profileshould be used around the walls surrounding the toughened glass partition ,Final certifications of products should be submitted be from the product manufacturer for the origina lity of the productand manufacturer should be have its own service team to install . The above work complete in all respect and sh ould be as per approved drawings and to the satisfaction of Architect /Engineer-in-Charge. |
| 236 | Supply and installation of RFID card based entrance mortise locks (Model no X1 Pro Rose Gold in Delta Home/Equivalent in Dolphy/Tait on/Ozone) made of aluminium alloy duly powder coated in black/rose gold/approved colour of minimum size 250x65mm for door thickness 30-70mm along with free supply of05 nos cards complete in all respects including cutting, installation, making good of door finish ing etc as per directions of Engineer-in-charge. |
| 237 | Supply and installation of energy savings switch compatible with entrance lock RFID card and also having provision to control (On/Of f) all electrical/mechncial fixtures in room (Model no DHDL0004-W of Doplhy/Equivalent in Taiton/Ozone)complete in all respects in cluding cutting, installation, making good ofwall finishing etc as per directions of Engineer-in-charge. |
| 238 | Provding and fixing of perforatedAluminium Screen façade system (Make :-Hunter-Douglas/Kingspan Jindal) with minimum 50 micronpo wder coating (Approved colour)made out of 2mm thickness single skin sheet with normal panel size of900mmX2300mmand diameter ofperforaton ranging from 50 to 600mm. The sheet shall be fixed to wall cladding surface with 5 mm thicknss aluminium bracket of size50*50/ 75 mm length and other necessary accessories such as fasterners, cleats etc complete in all respects as per directions of En gineer-in-charge. As the work is of specialized nature and requires skilled workmanship, hence, it should be got executed directly f rom manufacturer/authorized fabricator/dealer of manufacturer. |
| 239 | Fibre Reinforced plastic Artwork on Front Elevation including Fixing on site along with paintingwith polymer-based—epoxy and polye ster paints of required shade and shape complete in all aspects including Transportation to site, Skilled man power, Materials requi red for completion of work in all aspects as per directions of Engineer in charge. Copy of same is enclosed with tender document. |
| 240 | Providing and fixing white vitreous china pedestal type water closet (European type) (Ref. Make: HINDWARE, Model: Cat No.-20058 or e quivalent approved in Jaquar/Cera) with seat and lid, 10 litre low level white vitreous china dual flushing cistern (Ref. Make: HIND WARE, Model: Cat No.-21028 or equivalent approved) & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arran gement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fitti ngs and brackets, cutting and making good the walls and floors wherever required :(For Servant) |
| 241 | "Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore " |
| 242 | Providing & fixing of white vitreous china Under counteroval wash basin 595 x 420 mm with CP brass waste assembly, wall flanges an d rubber adapters for waste connection complete including CI/MS brackets duly painted, nuts, washers, cutting and making good the wa lls floors wherever required as per direction of Engineer-Incharge. (For Servant - Make Kohler K-2211IN-O+K-45432IN - CP OR EQUIVALE NT) |
| 243 | Providing and fixing Stainless Steel A ISI 304(18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm,including painting of fittings and brackets, cutting and making good the walls wherever required : |
| 244 | "kitchen sink with drain board 510x1040 mm bowl depth 225 mm " |
| 245 | "Providing and fixing 15mm diameter C.P. brass shower mixer (Ref. Make: JAQUAR, Model: Cat. No. 7273 or approved equivalent) and sho wer (Ref. Make: JAQUAR, Model: Cat. No. 7489N or approved equivalent) including cutting & making good the walls wherever required, e tc. complete in all respects inclusive of cost of all materials, labour, tools, tackles etc., as per specifications and directions o f the Engineer-in-Charge. " |
| 246 | "Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of ap proved make and shade with 6 mm thick hard board backing : " |
| 247 | "Rectangular shape 1500x450 mm " |
| 248 | "Providing and fixing toilet paper holder : C.P. Brass (Ref. Make: JAQUAR, Model: Cat. No.-1151 or approved equivalent). " |
| 249 | "Providing & Fixing Glass bodyliquid soap dispenser with single push lever fitted with liquid soap (one time) includingcutting a nd making good the walls, wherever required.(MAKE KOHLER K-10712IN-AF OR EQUIVALENT) " |
| 250 | "Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineerin- charge. " |
| 251 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 252 | Flexible pipe 40 mm dia |
| 253 | Providing and fixingCP Brass 600mm Long Towel Rail with fittings, cutting and making good the walls wherever required complete as per directions of Engineer-Incharge. |
| 254 | Providing & fixing C.P. Brass battery based infrared sensor operated pillar cock, having foam flow technology : |
| 255 | 15 mm nominal bore |
| 256 | Providing and fixing wall Mounted C.P brass sink cock with swinging type casted spout with wall flange complete to the satisfaction of Engineer in charge.(MAKE KOHLER K-20591IN-4-CP OR EQUIVALENT) |
| 257 | Providing and Fixing of cp COAT Hookcomplete, including cutting and making good the walls where required.(Make Kohler K-5635IN-CP or equivalent) |
| 258 | Providing & fixing Angle Valve(Ref. Make: JAQUAR, Model: Cat. No. 563 or approved equivalent) and Health Faucet with flexible tube8mm diameter x 1.5 m long (Ref. Make: JAQUAR, Model: Cat. No. 549 or approved equivalent). |
| 259 | "Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gm s. " |
| 260 | "15 mm nominal bore " |
| 261 | "Providing and fixing Heavy class SS grating with Cockroach proof SS strainer with ring and two nos ss screw of approved design incl uding setting in floor with cement motor to match with floor finish as per architect requirement " |
| 262 | "Location: for all Floor trap / Floor Drain (Except Urinal Floor trap) " |
| 263 | Supply installation, testing and commissioning of water cooler with Inbuilt Aquagaurd RO purification + UV(50LPH) .Cooling capacity shall be 60 liter & 80 liter shall be storage capacity.Its should have 7 stages purification process,fully automatic,rectangular tan k with Forced fin and tube condenser,Non-corrosive SS-304 outer body,Food-grade SS-304 stainless steel inner tank (18/8 or 18/10),PU F insulation,Reciprocating compressor with R22 Refrigerant.Water outlet temp is aprrox 17 deg c ,Operating power supply 230 + 10% V AC,50 Hz,1 PH,No of Cold water Faucet-2.Dimension (660W x 480DX1355H) (Make Bluestar or equivalent) |
| 264 | Providing ,Fixing, Unloading &Handlingof white vitreous China wall mountingwater closet with CP bolts, nuts, CI chair hanging arrangements, bakelite seat & cover with CP hinges & rubber buffers, CP brass screw, washer with all accessorieswith Rubber Lip / Buffer and side gap filled with silicon sealant wherever required with chrome finished brassConcealed Cistern+ dual operated coverplate or approved equivalent) comprising of actuator button facia assembly including brass / SS screws and washer etc., all complet e including cutting, making good the walls, floors, slab wherever required as per direction of Engineer-Incharge.For Guest Toilet (M AKE:- K-6321IN-SS-0 VEIL WALL HUNG ELOGANTED BOWL,CISTERN-K-26352IN-P-NA, DUAL PLATE-K-20189IN-P-CP in Kohler or equivalent) |
| 265 | Providing ,Fixing, Unloading &Handlingof white vitreous china oval wash basin forundercounter mounting, specially fabricated brackets, painted white, 32mm C.P.waste,connection pipe & rubber adopter for waste connection, complete including cutting and ma king good thewalls, wherever required. (MAKE:-K-2200IN-7 KOHLER- , WASTE COUPLING-K-45432IN-CP in Kohler/ Equivalent in ROCA/H INDWARE) |
| 266 | Providing ,Fixing of 15mm C.P brass sensor type Pillar cockwith C.P brass threaded flange complete, including cutting and making g ood the walls wherever required.For Guest Toilet (MAKE:- K-24270IN-ND-CP Kohler/ Equivalent in ROCA/HINDWARE) |
| 267 | Providing ,Fixing ofC.P brass towel ring complete with C.P brass brackets fixed to wooden cleats with C.P. brass screws.For Guest Toilet (MAKE:- KOLHER -CAT NO-K-97498T-CP in Kohler/ Equivalent in ROCA/HINDWARE) |
| 268 | Providing ,Fixing ofHealth faucet with PVC Flexible Tube with wall hook wherever required.For Guest Toilet (MAKE:- KOHLER -CAT NO- K-12927IN-AF in Kohler/ Equivalent in ROCA/HINDWARE) |
| 269 | Providing ,Fixing of Soap Dispenser with Glass Bottlecomplete, including cutting and making good the walls wherever required.For G uest Toilet (MAKE:- KOHLER -CAT NO-K-10712IN-AF in Kohler/ Equivalent in ROCA/HINDWARE) |
| 270 | Providing ,Fixing of straight / offset type flexible single body push fit type WC pan connector ofwith integral single mould seali ng fins made of flexible EVA body to be fixed with manufacture supplied grease, including rubber bush / adaptor for use with C.I pip e as supplied with the pan connector.(MAKE:- Mcalpine-MAC1/Kohler K-1036902 or equivalent) |
| 271 | Providing ,Fixing of15mmangle valve with C.P copper connecting pipe 375mm long and nuts, washer with C.P. brass flange complete,including cutting and making good the walls, wherever required.For Guest Toilet (MAKE:- KOHLER -CAT NO-K-23515IN-4-CPin Kohler/ E quivalent in ROCA/HINDWARE)) |
| 272 | Providingfixing of SDG Frameless Beveledmirror of size 600x450mm (oval/rectangular) with C.P. brass screws, studs and washers co mplete as per approval Complete in all respects.For Guest Toilet |
| 273 | Providing ,Fixing of Bottle Trapcomplete including cuttingandmaking goodthe walls wherever required.For Guest Toilet (MAKE:-KOHLER -CAT NO-K-75823IN-CP in Kohler/ Equivalent in ROCA/HINDWARE)) |
| 274 | Providing and Fixing 3 way diverter & Bath Spout with shower arm (Make-K-22787IN-4-BV,K-16346IN-BV,K-10385IN-BV) |
| 275 | Providing and Fixing Glass Shower inclosures complete including cuttingandmaking goodthe walls/floor wherever required. (Make- K-705190IN-SHPin Kohler/ Equivalent in ROCA/HINDWARE)) |
| 276 | Providing and Fixing shower panel complete including cuttingandmaking goodthe walls/floor wherever required. (Make-K-24470IN-C Pin Kohler/ Equivalent in ROCA/HINDWARE) |
| 277 | WATER SUPPLY |
| 278 | "Internal Work - Concealed in wall: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for h ot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same incl uding testing of joints complete as per directions of the Engineer-in-Charge : " |
| 279 | "15 mm nominal outer dia pipe " |
| 280 | "20 mm nominal outer dia pipe " |
| 281 | "25 mm nominal outer dia Pipes " |
| 282 | Internal Work - Exposed on Wall: Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and makin g good the walls etc. : |
| 283 | 25mm nominal bore |
| 284 | 32 mm nominal bore |
| 285 | 40mm nominal bore |
| 286 | "Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approvedquality for new work : " |
| 287 | 25mm nominal bore |
| 288 | 32 mm nominal bore |
| 289 | 40mm nominal bore |
| 290 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 291 | "25 mm nominal bore " |
| 292 | "32 mm nominal bore " |
| 293 | "40 mm nominal bore " |
| 294 | "50 mm nominal bore " |
| 295 | "Providing and fixing thermal insulation over hot water pipes in chase having Japanese Red Oxide Primer Coat with 6mm thick Kaiflex,nitrile or approved equivalent thermal insulation tubing, a elastomeric flexible material having hermetic blister closed cell struc ture of expanded synthetic rubberhaving density of 60-90 Kg/m3 over pipes of following sizesincluding all required accessories c omplete as per Manufacture"s specifications and finishing complete in all respect as directed by Engineer-in-charge. " |
| 296 | "15 mm nominal bore " |
| 297 | "20 mm nominal bore " |
| 298 | "25 mm nominal bore " |
| 299 | Providing & fixing Auto Air vent for cold water supply risers, suitable for pressure not less than 15 Kg/Sq.cm. |
| 300 | 15mm |
| 301 | "Providing and fixing gun metal non- return valve of approved quality (screwed end) : Horizontal" |
| 302 | 50 mm dia |
| 303 | "Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New wor k) : " |
| 304 | "20 mm dia nominal bore " |
| 305 | "25 mm nominal bore " |
| 306 | " 32 mm nominal bore " |
| 307 | 40 mm nominal bore |
| 308 | "50 mm nominal bore " |
| 309 | "Providing and placing on terrace (at all floor levels) polyethylene water storage tank (Ref. Make: SINTEX or approved equivalent), IS:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but wit hout fittings and the base support for tank. " |
| 310 | Providing, fixing, testing and commissioning moterise Ball valve of following sizes, for filling of overhead tanks complete with hig h & low level switchs & pressure switch to control the valve. The level controller shalll be installed in over head tank. The level switch will close the valve when water level is high & open the valve when level is low in the tank. The system should be complete i n all respect with accessories, 220V AC / 24 V DC, IP 67 water level control unit, Control Panel, copper control wiring in whether p roof casing etc. |
| 311 | 32mm dia. |
| 312 | DRINAGE |
| 313 | "Providing and fixing soil, waste and vent pipes " |
| 314 | "Providing and Fixing uPVCpipes type -B conforming to IS: 13592 for soil, waste and vent pipes including all fittings rubber ring type (plain or with access door) e.g. bends, junctions, cowls, offsets, access pieces, clean out plug,jointing with rubber ring jo ints with lubricant etc. fixed with clamps to walls with cement concrete 1:2:4 blocks complete in all respects. Location: Shaft & Inside (From Terrace to Ground floor)" |
| 315 | "110 OD mm dia Pipes " |
| 316 | Supplying and fixing uPVC pipes for waste pipes as per IS 4985: 2000of 10 kg/cm2 and moulded/fabricated fittingswith solvent cem ent joint. Includes fittings (plain or door) tees, bends, collars, crosses, reducers etc.and making good the walls etc. for concea led pipe and testing of pipelines, etc all complete as per specifications. |
| 317 | 40mm OD Pipes |
| 318 | 50 mm OD Pipes |
| 319 | Floor trap WITH Boss"T" in Toilets - Suspended below slabs |
| 320 | Supply and fixing of custom made PVC floor Trap made out of 110 mm OD, 10Kg/cm2. class PVC pipe, with depth to suit as per site cond itions and multiple inlets to suit as per site conditions with inlet sizes ranging from 40 mm to 50 mm and outlet pipe of 110mm. Thebottom of the sump shall be dummied water tight. Wherever, sumps are shown to have water seal, the seal depth shall be minimum 40 m m. The top of the trap shall be provided with threaded Boss and shall have a threaded seal cover. The trap shall be used for connect ing the urinal drain. |
| 321 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. |
| 322 | Making Khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggr egate of 20 mm nominal size) over P.V.C. sheet 1 m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse s and) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. |
| 323 | Providing and fixing rain water Upvc pipes of6 kg./cm2 conforming to IS: 4985 including all fittings with or without access door o r without access i.e bends, junctions, cowls,offsets,etc., and jointing with solvent cementand excavation, refilling and dispo sal ofsurplus earth, including cutting holes inwalls and floors, excavation, refilling and disposal of surplusearthwherever required and making good the same, complete as directed by the Engineer-in-Charge. |
| 324 | 160 mm dia |
| 325 | SOLAR WATER SYSTEM |
| 326 | "400LPD FPC solar water heating system, with 2.0mm SS Inner Tank and GI Pre Coated Outer Cladding after 50mm PUF Insulation and withprovision of 2x3KW Electrical Heater. The tank stand of MS Hot Dip Galvanised frame of suiltable size. With 4 Nos. Flat Plate colle ctor. The Collector shall be copper based - with copper tubes and copper fins as per MNRE specification and as per IS12933. Collecto rapprox size 2080mmx1070mmx100mm EA (125 litres/day capacity EA Panel). Complete with suitable MS Powder Coated Stand. Including N on Return Valve, Three Gate Valve for Tank and Collector, Temperature Gauge, System Internal Piping and Air Vent of system with heig ht as per cold water tank.Excluding minimum civil work of grouting for 400LPD FPC solar water heating system " |
| 327 | EXTERNAL WATER SUPPLY |
| 328 | Providing and fixing GI pipes complete with GI fittings including trenching and refilling etc. |
| 329 | External Work |
| 330 | 32mm dia nominal bore |
| 331 | 50mm dia nominal bore |
| 332 | Painting GI pipes and fittings with two coats of anti corrosive bitumestic paint of approved quality. |
| 333 | 32mm dia nominal bore |
| 334 | 50mm dia nominal bore |
| 335 | Providing and filling sand of grading zone V or coarser grade alround the GI pipes in external work. |
| 336 | 32mm dia nominal bore |
| 337 | 50mm dia nominal bore |
| 338 | Constructing masonary chamber 60x60x75cm, inside with 75 class designation brick work in cement mortar 1:4(1 cement : 4 coarse san d) for sluice valve,with C.I. Surface box 100mm top diameter , 160 mm bottom diameter and 180 mm deep ( inside ) with chained lid and RCC top slab 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement:5 fine sand: 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarsesand) 12mm thick finished with a floating coat of neat cement complete as per standard design with F.P.S. bricks. |
| 339 | with common burnt clay F.P.S.(non module) brick of class designation 7.5 |
| 340 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end): |
| 341 | 32 mm nominal bore |
| 342 | 50 mm nominal bore |
| 343 | Providing and fixing enclosed type water meter (bulk type) conforming to IS : 2373 and tested by Municipal Board complete with bolts ,nuts, rubber insertions etc. (The tail pieces if required will be paid separately) : |
| 344 | 80 mm nominal bore |
| 345 | Providing and fixing tanker filling hopper made of 100 mm dia GI pipe with locking arrangement and 10 Meter length of GI pipe mediumduty 100mm dia with anti corrosive coating complete as per detail. |
| 346 | SEWERAGE SYESTEM |
| 347 | Excavating trenches of required width in all kinds of soil for pipes, cables, etc. including excavation for sockets, and dressing ofsides, ramming of bottoms, upto specified depth, including getting out the excavated soil, and then returning the soil as required,in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of su rplus excavated soil, all work up to any lead & lift as directed by the Engineer-in-Charge : |
| 348 | Trench depth upto 1.5m : |
| 349 | Pipes, cables etc, exceeding 80mm dia but not exeeding 300 mm dia |
| 350 | Excavating trenches of required width forpipes, cablesetc.Including excavation for sockets, depth upto1.5M including getti ngout the excavated materials, returmingthesoilas required, in layers not exceeding20 cms in depth including consolidatingeach depositedlayerbyramming, watering etc., stacking serviceable material for measurementsAnd disposing of u nserviceable material as directed within a lead of 50 m. |
| 351 | Ordinary rock |
| 352 | Pipes, cables etc, exceeding 80mm dia but not exeeding 300 mm dia |
| 353 | Excavating trenches of required width in hard rock (requiring blasting) for pipes, cables, etc. including excavation for sockets, an d dressing of sides, ramming of bottoms, upto specified depth, including getting out the excavated soil, and then returning the soilas required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and di sposing of surplus excavated soil, all work up to any lead & lift as directed by the Engineer-in-Charge : |
| 354 | Pipes, cables etc, exceeding 80mm dia but not exeeding 300 mm dia |
| 355 | Earthwork in excavation by mechanical means ( Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1. 5m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5m, including getting out the excava ted soil and disposal of surplus excavated soil as directed, with in a lead of 50m. |
| 356 | All kind of soil |
| 357 | Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in widt h or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. |
| 358 | Ordinary rock |
| 359 | Hard rock (blastig prihibited) |
| 360 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conformi ng to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excava tion and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. |
| 361 | 150 mm diameter |
| 362 | Providingandlayingcement concrete 1:5:10 ( 1cement:5 coarse sand: 10 gradedstone aggregate40 mm nominal size) up to hunches RCC pipes sewer/storm drainage includinginbedfor pipes to belaidintrenches as per standard details. |
| 363 | 150 mm diameter |
| 364 | Constructing brick masonry manhole with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in cement mortar 1:4 (1 cement : 4 coarse sand) with R.C.C. top slab with 1:1.5:3 mix [1 cement : 1.5 coarse sand (Zone-III): 3 graded stone aggregate 20mm nominal size], foundation concrete 1:4:8 mix [1 cement : 4 coarse sand (Zone-III): 8 graded stone aggregate 40 mm nominal size],inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and maki ng channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floati ng coat of neat cement complete as per standard design : |
| 365 | Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cov er and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : |
| 366 | Extra for depth for manholes |
| 367 | For rectangular manhole size 90x80 cm (Constructed with common burnt clay F.P.S. (non modular) bricks of class designation 7.5) |
| 368 | Providingorange colour safety foot rest of minimum 6mm thickplasticencapsulated as per IS : 10910 on12mm dia steelbar confor mingto IS :1786 having minimum cross section as 23mm x 25mm and over allminimum length 263mm andwidth as 165mmwith minimum 1 12mm space between protrude legshaving2mm tread on top surface by ribbing or chequering besides necessary andadequate anchorin g projections on tail length on 138mmas per standard drawing and suitable to with dtand the bendtest andchemical resistancet est as per specifications and havingmanufacture"spermanent identification make to be visible even afterfixing, including fixin g in manholes with 30x20x15cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) co mplete as per design. |
| 369 | DRAINAGE SYSTEM |
| 370 | Excavating trenches of required width in all kinds of soil for pipes, cables, etc. including excavation for sockets, and dressing ofsides, ramming of bottoms, upto specified depth, including getting out the excavated soil, and then returning the soil as required,in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of su rplus excavated soil, all work up to any lead & lift as directed by the Engineer-in-Charge : |
| 371 | Trench depth upto 1.5m : |
| 372 | Pipes, cables etc, exceeding 80mm dia but not exeeding 300 mm dia |
| 373 | Excavating trenches of required width forpipes, cablesetc.Including excavation for sockets, depth upto1.5M including getti ngout the excavated materials, returmingthesoilas required, in layers not exceeding20 cms in depth including consolidatingeach depositedlayerbyramming, watering etc., stacking serviceable material for measurementsAnd disposing of u nserviceable material as directed within a lead of 50 m. |
| 374 | Ordinary rock |
| 375 | Pipes, cables etc, exceeding 80mm dia but not exeeding 300 mm dia |
| 376 | Excavating trenches of required width in hard rock (requiring blasting is prohibited) for pipes, cables, etc. including excavation f or sockets, and dressing of sides, ramming of bottoms, upto specified depth, including getting out the excavated soil, and then retu rning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, waterin g, etc. and disposing of surplus excavated soil, all work up to any lead & lift as directed by the Engineer-in-Charge : |
| 377 | Pipes, cables etc, exceeding 80mm dia but not exeeding 300 mm dia |
| 378 | Providing and laying Non pressure NP2 RCC Pipes with collars jointed with stiff mixture of cement mortar in the propoertion of 1:2 ( 1 cement : 2 fine sand) including testing and jointing etc complete. |
| 379 | 150mm dia RCC Pipe |
| 380 | 250mm dia RCC Pipe |
| 381 | Providingandlayingcement concrete 1:5:10 ( 1cement:5 coarse sand: 10 gradedstone aggregate40 mm nominal size) alroun d DWC/RCC pipes sewer/storm drainage includinginbedfor pipes to belaidintrenches as per standard details. |
| 382 | 150 mm diameter |
| 383 | 250 mm diameter |
| 384 | Constructing brick masonry road gully chamber with common burnt clay F.P.S. (Non-modular) bricks of class designation 7.5 in cement mortar 1:4 (1 cement : 4 coarse sand) complete as per standard design : |
| 385 | Chamber size 50x45x60 cm including 500x450 mm pre-cast R.C.C. horizontal grating with frame |
| 386 | Earthwork in excavation by mechanical means ( Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1. 5m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5m, including getting out the excava ted soil and disposal of surplus excavated soil as directed, with in a lead of 50m. |
| 387 | All kind of soil |
| 388 | Providingorange colour safety foot rest of minimum 6mm thickplasticencapsulated as per IS : 10910 on12mm dia steelbar confor mingto IS :1786 having minimum cross section as 23mm x 25mm and over allminimum length 263mm andwidth as 165mmwith minimum 1 12mm space between protrude legshaving2mm tread on top surface by ribbing or chequering besides necessary andadequate anchorin g projections on tail length on 138mmas per standard drawing and suitable to with dtand the bendtest andchemical resistancet est as per specifications and havingmanufacture"spermanent identification make to be visible even afterfixing, including fixin g in manholes with 30x20x15cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) co mplete as per design. |
| 389 | 12 mm cement plaster finished with a floating coat of neat cement of mix : |
| 390 | 1:4 (1 cement: 3 fine sand) |
| 391 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 392 | 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 393 | Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in: |
| 394 | Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 395 | Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including c ollecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all eq uipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, |
| 396 | All types of soil |
| 397 | 300 mm dia |
| 398 | Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of requ ired dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all dep ths, as per direction of Engineer -in-charge. |
| 399 | 200 mm nominal size dia |
| 400 | Supplying, assembling, lowering and fixing in vertical position in bor well unplasticized PVC medium well screen (RMS) pipes with ri bs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direc tion of Engineer-in-charge. |
| 401 | 200 mm nominal size dia |
| 402 | Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, forall leads & lifts, all complete as per direction of Engineer-in-charge. |
| 403 | Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulde rs, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. |
| 404 | Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravellayer, for all leads & lifts, all complete as per direction of Engineer -in-charge. |
| 405 | Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality |
| 406 | H D - 20 - Circular shape 560 mm internal diameter |
| 407 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishi ng and reinforcement - All work up to plinth level : |
| 408 | 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) |
| 409 | Steel reinforcement for R.C.C. work including straightening, cutting, bending,placing in position and binding all complete upto plin th level. |
| 410 | Mild steel and Medium Tensile steel bars |
| 411 | WATER SUPPLY PUMPS & EQUIPMENTS AND WATER TREATMENT UNIT |
| 412 | Domestic Water Supply Pump (Hydropneumatic System With variable Speed System) |
| 413 | "Supply of Horizontal monoblock centrifugal pump, Each pump shall have TEFC2900 RPM three phase electric motor.The pump shall ha ve CI body, bronze impelleer.Pumps shall be provided with mechanical seal.The pump shall be suitable for auto / manual operationwith "Y"-Strainer (flanged),Expansion bellows complete with all respect. 1. Pump capacity- 1.5LPS/ each (1set=1 Working+1 Stand by) 2. Head - 55MWC 3. RPM- 2900 Purpose: Domestic Water transfer to OHT Location:PHE Pump room" |
| 414 | "To switch on the pumps (includingRaw Water Pump,Domestic water supply pump etc.) when the level of water in the supply water tankis lowandto cut off the pump when the level in thereceiving watertank is high and switch off the pumps when the level of wa ter in the supply water tank is low. a. To indicate 5 levels of water in all tanks through a control panel with LEDs b. To start the pumps in a cyclic order. c. The system shall be complete to ensure automatic quotation of pump in accordance to water level in respective tanks. d. The Contractor will include all the under ground and over head tanks and all the pumps as required for level control in this item " |
| 415 | Providing and fixing G.I. pipes to IS 1239 (heavy class) with GIfittings, flanges & clamps & galvanized MS structural supports inc luding cutting and making good the walls etc. complete. |
| 416 | 40 mm dia |
| 417 | 50 mm dia |
| 418 | Painting GI pipes (heavy class) with two or more coats of synthetic enamel paint of approved quality and shade over a coat of approv ed prming coat including galvanized MS supports and clamps as directed by the Engineer-in-charge (shade as per pipe colour code). |
| 419 | 40 mm dia |
| 420 | 50 mm dia |
| 421 | Providing & fixing of following sizes of butterfly valve of rating PN 16, wafer type, in cast iron body with Ductile Iron disc, EPDMseal, SS single piece shaft, conforming to IS-13095 of the following sizes complete with cast iron hand lever companion flanges, bo lts, nuts, washers & inserted rubber gaskets, as required and as per enclosed specification. |
| 422 | 50mm dia |
| 423 | Supplying & installation submersible pumping motor pumpsets ISI marked of approved , equivalent, making connection suitable for tube -well/D.C.B. The job includes screwing and welding of flanges on G.I. riser pipes (65 mm dia B-classminimum 120 meter length with two coat paint) installation, complete fittings accessories with riser pipes jointing of electrical cables other connections making switch board electrical connections including panel, all labour for testing of submersible pump and supply of water to water mains c omplete in all respects, 10.0 H.P app. motor having discharging capacity 12to 15 cum/hour against a head of 100 metres. |
| 424 | Supply, installation, testing and commissioning ISI marked (IS:15683) Fire Extinguisher, Carbon-di-oxide type capacity 4.5 Kg. Flat base including valve, discharge hose of not less than 10 mm dia, 1M long and complete in all respects including initial fill with CO 2 gas conforming to IS:307-1966 and walll suspension braket as required as per specifications.(Make-Newtech,Andex,Minimax) |
| 425 | Supply, installation, testing and commissioning ISI marked (IS:15683) portable fire extinguisher, water (gas pressure) type capacity9 ltr. with gun metal cap and nozzle and complete in allrespectsincluding initial fill and wall suspension brackets as requiredas per specifications.(Make-Newtech,Andex,Minimax) |
| 426 | Supply, installation, testing and commissioning of 6kg ABC (Powder Type) Fire Extinguisher. Mild Steel Cylinders ISI marked fitted w ith pressure indicating gauge, internal tube, squeeze lever type valve fully charged with ABC 90 powder (Mono Ammonium Phosphate) pr essured by Nitrogen complete in all respects including wall suspension bracket and conforming to IS:15683 as required as per specifi cations.(Make-Newtech,Andex,Minimax) |
| 427 | Providing and fixing Clean Agent Modular (ceiling mounted) Type Capacity 5 Kg CE certified Fire Extinguisher filled with HFC 236FACl ean Agent Gas. Complete in all respect.(Make-Newtech,Andex,Minimax) |
| 428 | Providing and fixing CO2 type fire extinguishers consisting of welded M.S. cylindrical body automatic modular CO2 type extinguisher actuated through a sprinkler head mounted on The extinguisher body finished externally with red enamel with trolly mounted complete with internal charge.(Capacity 22.5 Kg.)(Make-Newtech,Andex,Minimax) |
| 429 | "Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single corecable etc. as required." |
| 430 | Group C |
| 431 | "Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required." |
| 432 | "Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper con ductor single core cable etc. as required." |
| 433 | Group C |
| 434 | "Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required." |
| 435 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single corecable in surface/ recessed steel conduit as required. |
| 436 | 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 437 | 2 X 6 sq. mm + 1 X 6 sq. mm earth wire |
| 438 | 4 X 4 sq. mm + 2 X 4 sq. mm earth wire |
| 439 | 4X6 sq.mm + 2X6 sq.mm earth wire |
| 440 | 4X10sq.mm + 2X 6 sq.mm earth wire |
| 441 | 4 X 16 sq. mm + 2 X 6 sq. mm earth wire |
| 442 | Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper bra id and protected with PVC sheath in the existing surface/ in heavy duty PVC ISI Mark conduit as required. |
| 443 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface recess including cutting the w all and making good the same in case of recessed conduit as required. |
| 444 | 25 mm |
| 445 | "Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required." |
| 446 | Telephone socket outlet |
| 447 | TV antenna socket outlet |
| 448 | RJ-45 Internet socket for Cat 6 |
| 449 | "Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required." |
| 450 | 1 or 2 Module (75mmX75mm) |
| 451 | 4 Module (125mmX75mm) |
| 452 | Supplying and fixing suitable size/module GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 Nos. 3 pin 5/6 Amp modular socket outlet and 1 No. 16 Amp modular switch, connection, painting etc. as required (For co mputer power applications). ( For Computer point) |
| 453 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fix ing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in no n residential buildings). |
| 454 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fix ing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. |
| 455 | Providing and fixing following rating and breaking capacity and 4 pole MCCB in existing cubicle panel board including drilling holesin cubicle panel, making connections, etc. as required(D.N series). |
| 456 | 40/63/100/ Amp, 25KA, FPMCCB |
| 457 | 300/400 A,50KA,FPMCCB |
| 458 | "Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)" |
| 459 | 8 way , Double door (UPS DB) |
| 460 | Supplying and fixing following way, horizontal type three phase and neutral, sheet steel, MCB distribution board, 415 volts, on surf ace/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including ea rthing etc. as required. (But without MCB/RCCB/Isolator) |
| 461 | 6way (4 + 18), Double door |
| 462 | 8 way (4 + 24), Double door (For power ckt. DBs + Light Load ckt. DB & UPS DBs ) |
| 463 | "Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)" |
| 464 | 8 way (4 + 24), Double door (For Light Load ckt. DB ) |
| 465 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of fo llowing poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 466 | Single pole |
| 467 | Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 468 | 40 amps 4P |
| 469 | 63 amps 4P |
| 470 | Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), havi ng a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 471 | 40 A |
| 472 | 63 A |
| 473 | Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled whi te on both sides, and with inscription in single red colour on front side as required. |
| 474 | "Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required." |
| 475 | 150 mm width X 50 mm depth X 1.6 mm thickness |
| 476 | EARTHING |
| 477 | "Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charc oal/ coke and salt as required.(Feeder Pillar = 2 No. ) " |
| 478 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. (LIGHTNING ARRESTER=4N o. , Main Panel = 2 No. , VDB= 2 No. ) |
| 479 | Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plat e having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. (DG+Lift) |
| 480 | "Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)" |
| 481 | Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipeearth electrode including connection with brass nut, bolt, sp ring, washer excavation and re-filling etc. as required. |
| 482 | "Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required." |
| 483 | "Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required." |
| 484 | Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required. |
| 485 | "Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required." |
| 486 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ su bmain wiring/ cable as required. |
| 487 | LIGHTNING ARRESTER |
| 488 | "Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required." |
| 489 | "Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run)" |
| 490 | "Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run)" |
| 491 | "Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required." |
| 492 | "Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly in ground as required." |
| 493 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. |
| 494 | Upto 35 sq. mm |
| 495 | Above 95 sq. mm and upto 185 sq. mm |
| 496 | MV CABLE JOINTING & END TERMINATION |
| 497 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC she athed / XLPE aluminium conductor cable of 1.1 KV grade as required. |
| 498 | 2 X 6 sq. mm (19mm) |
| 499 | 2 X 10 sq. mm (25mm) |
| 500 | 3½ X 120 sq. mm (45mm) |
| 501 | 4 X 25 sq. mm (28mm) |
| 502 | "Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole/wall including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nu ts, bolts and washer, painting the flat iron with primer and finish paint etc. as required." |
| 503 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conformi ng to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excava tion and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. |
| 504 | 63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 505 | 90 mm dia (OD-90 mm & ID-76 mm nominal) |
| 506 | "Supplying,installation,testing and commissioning of Passive Infrared(PIR) technology based occupancy sensor having high preformance, non regulating programmable type, suitable for connected load upto 10Amp , for mounting height up to 2.8 mtr and for 5 m diameter coverage area along with necessary fixing arrangements i/c programming at site etc. complete as required. " |
| 507 | "Supplying,installation,testing and commissioning of Astronomical time switch of following configuration to be mounted in feeder pillars / Lighting DBs for automatic switching On & OFF of street lights at sun set & sun rise or twilight(Auto ON, Auto OFF, Auto modes) with manual override facility with 12/24 hour display format with suitable battery and indication for relay status i/c programming at site complete as required." |
| 508 | "3 output (1output per phase) and suitable for three phase supply" |
| 509 | "Supply, Installation, Testing and Commissioning of LED RGB/RGBW Linear Wall Washer luminaire for Facade lighting with aluminium ext ruded housing, of following wattage. Luminaire shall be capable of producing dynamic color changing light with 16 million colors by DMX/Ethernet based control. The beam angle of the fitting shall be narrow, medium, wide or asymmetric as per the requirement. Lumina ire shall be complete with driver and capable of operating at line voltage without any separate power supply from 100 to 270 V AC, 5 0 Hz, power factor > 0.9 . Fixture shall be suitable to operate at ambient temperature range of -10°C to +50°C and shall be IP 65 and IK06 rated. Lifetime should be at least L70:50000 burning hour s at 50°C. Luminaire shall be conforming to BIS and shall be complete with all necessary accessories required for proper working of fixture including weather proof connection cables, water proof connectors etc. as required. " |
| 510 | Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC ) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Powe r Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 3 74-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pi n, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. |
| 511 | Supplying and fixing 40 amps to 63 amps rating, 415 volts, "C" curve, miniature circuit breaker suitable for inductive load of follo wing poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make:- Schneider, Legrand ,Havells. |
| 512 | MCB TP 40A |
| 513 | MCB TP 63A |
| 514 | "Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 250 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note: Vertical type MCCB TPDB is normally used where 3 phase outlets are required.) Make:- Schneider, Legrand , Havells." |
| 515 | 6 way (4 + 18), Double door |
| 516 | SupplyTesting and Commisioning of Combi Euro Socket and USB type A+type C 3.1 A in existing modular box complete in all respect in cluding necessary connections etc. |
| 517 | SupplyTesting and Commisioning of Skirting Light 2M in existing modular box complete in all respect including necessary connection s etc. |
| 518 | SupplyTesting and Commisioning of 25A Motor Starter in existing modular box complete in all respect including necessary connection s etc. |
| 519 | SupplyTesting and Commisioning of KEY CARD SWITCH 15A AND KEY FOBin existing modular box complete in all respect including neces sary connections etc. |
| 520 | SupplyTesting and Commisioning of DND Internal Unit in existing modular box complete in all respect including necessary connection s etc. |
| 521 | SupplyTesting and Commisioning of DND External Unit in existing modular box complete in all respect including necessary connection s etc. |
| 522 | Supply and fixing in position approved shock treatment chart written in English, Hindi nd local language. These charts shall be fram ed in wooden frame and covered with clear glass. |
| 523 | "Supply, installation, testing and commissioning of powder coated of Siemens grey of approved colour compartmentlised cubicle MV Pan el fabricated out of 14 SWG thick CRCA sheet steelsuitable for operation on 415 Volts, 50Hz, 3 Phase 4 wire AC supply . The panel shalll be indoor free standing, floor mounting, dust and vermin proof type, adeqate size cable alley with front operated rotary hand les for MCCB"s complete with gland plates, lifting hooks, ventillating louvers, busbars, Inter connections, earthing, labelling, ele ctrically and Mechanically interlocking ,as per specification and drawings, suitable for termination of cables as per single line diagram including. supply and fixing of following switchgear and accessories complete as required. A separate earth copper bus bar o f size 25 mm x 5 mm to be provided throughout the length of the panel. The Panel should be extendable type. (Make of panel, Tricolit e, International Switchgear, Embit ,Kalyani switchgear). Having CPRI test certificate breaking capacity 70 KA and ISO 9001-2008. Note:- The cost ofMCCBs, etc. are not included in the panel"s cost and shall be paid under separate head. All acccessories include d in the panel cost such asMCBs , COS, rotary handles and its accessories & metering etc.The panel should be got inspected / tes ted in the factory premises from the Engineer-in-charge / consultant before brought at site after approval of all drawings of the pa nel. INCOMER FEEDER MCCB 300A.FP 36KA TM Based=1No. Spreader Links =1No. Extended Rotary Handle=1No. 300A FP COS =1No. METERINGSET Voltmeter with VSS =1No. Ammeter with ASS =1No. RYB Indication Lamp LED =3No. 100/5Amp. 15 VA CL-1 Current Transformer =3No 06Amp. Control SP MCB.=3No CT Short Link =1No " |
| 524 | "OUTGOING FEEDER For Terrace Pump 450 LPM MCCB 40A. FP 25KA =1No Spreader Links =1No. Extended Rotary Handle =1No. FORSPARE MCCB 40A. FP 25KA=1No Spreader Links=1No Extended Rotary Handle=1No For Street light feeder pillar MCCB 63A. FP 25KA =1No Spreader Links =1No Extended Rotary Handle =1No For VDB Light Load 6way MCCB 63A. FP 25KA=1No Spreader Links=1No Extended Rotary Handle =1No For VDB Power Load 8way MCCB 100A. FP 25KA =1No Spreader Links=1No Extended Rotary Handle=1No For UPS MCCB 63A. FP 25KA=1No Spreader Links=1No Extended Rotary Handle=1No" |
| 525 | "For Lift MCCB 63A. FP 25KA =1No Spreader Links =1No Extended Rotary Handle =1No FORSPARE MCCB 100A. FP 25KA=1No Spreader Links =1No Extended Rotary Handle =1No ForElectric Pump 2280 LPM MCCB 63A. FP 25KA =1No Spreader Links =1No Extended Rotary Handle =1No FOR FireFighting Panel MCCB 100A. FP 25KA =1No Spreader Links=1No Extended Rotary Handle =1No Dummy=2No ENCLOSURE & ACCESSORIES Fabrication in 1.6/2mm.CRCA Sheet Powder Coating in SiemensGray Shade, Cable Entry will be Top & Bottom Suitablefor Cable ,Lock,Rubber Gasket,hardwareetc. BUS BAR & HARDWARE 500A. Aluminium Main Bus Bar,Load wise Sub Feeder Bus Bar Colour Coated Heat ShrinkBus Bar sleave Nut-Bolt,Washer ,Hardwareetc. WIRING & ACCESSORIES Power & Control Wiring will be (ISI 1100V) flamc smoke FRLS PVC Single Core Copper Wire,Copper Lugs, PVC Sleeve, Ferruels Numbers,Hardware & Labour etc." |
| 526 | "Supply, installation, testing and commissioning of UPS PANEL FOR UPS OF 10KVA complete in all respect INCOMER FEEDER MCB 63A. FP 10KA = 2NO. Voltmeter with VSS=1No. Ammeter with ASS =1No.Indication Lamp LED= 6NO. 63/5Amp. 15 VA CL-1 Current Transformer = 2NO. 06Amp. Control SP MCB = 6NO. CT Short Link = 6 NO. OUTGOING FEEDER MCB DP 32 A10KA. = 6 NO. MCB DP 32 A10KA.SPARE=2NO. MCB DP 16 A10KA. SPARE = 1NO. Dummy = 1NO. ENCLOSURE & ACCESSORIES Fabrication in 1.6/2.0.CRCA Sheet Powder Coating in SiemensGray Shade,75x40mm.Channel Base Frame, Cable Entry will be Top & Bott om Suitablefor Cable ,Lock, Rubber Gasket,hardwareetc. BUS BAR & HARDWARE100A, FP AluminiumMain Bus Bar,Load wise Sub Feeder Bus Bar Colour Coated Heat ShrinkBus Bar sleave Nut-Bolt ,Washer ,Hardwareetc. WIRING & ACCESSORIES Power & Control Wiring will be (ISI 1100V) Flame Retardent Low Smoke PVC Single Core Copper Wire,Copper Luggs, PVC Sleeve, ferrules,Numbers, Hardware & Labour etc." |
| 527 | "UPS System Description:- Supply, installation, testing and commissioning of10KVA/ 10KW True Online , DSP Controlled online UPS wi th1 phase AC input and 1 phase AC output with 30 minbackup with 12V SMF batteries Bank with Rack( min. VAH required =10,080 VA H) ,The UPS should bewith IGBT Based Rectifier andIGBTbased Inverter bothand with bothLCD & LEDdisplay for monitoring ofits statusalong withsame OEM make inbuilt Galvanic Isolation Transformerat input side Input (Rectifier) :- Technology :- IGBT PWM BASED TECHNOLOGY for Rectifier & Inverter both Primary source voltage :- 230 VAC 1 Phase Input Voltage Range :- 180-295V AC Power device :- IGBT Based Rectifier Input Frequency :- 50Hz /60 Hz (Auto Sensing) Input Frequency Range :- 45Hz-55Hz /55Hz-65Hz Galvanic Isolation:- UPS Should be of same OEM makeInbuilt Galvanic Isolation Transformer at Input side Input power factor :- > 0.99 Output (Inverter) Technology:- IGBT Based Inverter DC volts :- 240VDC Output voltage :- 220/230/240V AC 1 Phase Output frequency :- 50 Hz /60 Hz (+/- 0.1Hz) Output wave form :-Pure Sine Wave Output Power Factor :- not less than unity Harmonic distortion :- THD <2% for linear loads, < 5% for non - linear loads. overall Efficiency :- upto 94%without Isolation Tx. Crest factor:- 3:1 Overload :- up to 130% for 5 Min. , upto 150% for60sec General LCD Pannel :- DSP Controlled LCD Pannel Smart Battery Managmnt :- Should be inbuilt within the UPS System Cold Start Feature :- Cold start feature required as standard in UPS Back-up:- 30 min with Min VAH Required -10080 VAH on 12V SMF batteries Battery Make :- Exide /Amaron-Quanta/Panasonicor other approved makes warranty :- 2 years on UPS & 2 years on Batteries LCD Display information :- Normal Mode/Load on Battery/Load on Bypass/System Fault Audible Alarm :-Mains Failure/Low battery /UPS Warning /Overload/Fault & Bypass Mode etc Communication interface :-RS232/USB port for software interface and SNMPoptionalfor remote Monitoring Ambient temperature :- Standard: 0 - 40 Deg.C Noice Level :- <50dB at 1 Meter Cooling :- Forced Air CERTIFICATIONS& Standard :- Latest ISO 9001 & 14001 &Indian BIS Certified, CE & PEP certified product with EN 62040-1,2 & 3 comp liance& ROHS Compliance & Make in India product Compatibility :- DG Set Preffered/Approved Brand :-APC /Emerson -Vertiv /Legrand-Numeric Other Terms & Conditions :- OEM should have 2-3 own /ASPbased service centersin the state for better & timely service support , need to share atleast 2 engineers contact details with service centre addressdetailsin the region of installation and OEM Turnov er should not be less than 300 Crores/year in last 3 financial years with profitability. 10 years presence of OEM in Govt. project s egment And Quoted product should be available on OEM Website with as per asked technical compliance." |
| 528 | "Supply, installation, testing and commissioning of powder coated of Siemens grey of approved colour compartmentlised cubicle MV Pan el fabricated out of 14/16 SWG thick CRCA sheet steelsuitable for operation on 415 volts, 50Hz, 3 Phase 4 wire AC supply . The pan el shalll be OutDoor free standing,Double Door floor mounting, dust and vermin proof type, adeqate size cable alley with front opera ted rotary handles for MCCB"s complete with gland plates, lifting hooks, ventillating louvers, busbars, Inter connections, earthing,labellingas per specification and drawings, suitable for termination of cables as per single line diagram including. supply and f ixing of following switchgear and accessories complete as required. A separate earth copper bus bar of size 25 mm x 3 mm to be provi ded throughout the length of the panel.The Panel should be extendable type. (Make of panel, Tricolite, Ambit, International Switch gear, Amco,Kalyani switchgear)l). Having CPRI test certificate breaking capacity 70 KA and ISO 9001-2008. Note:- The cost of MCCBs, MCBs are not included in the panel"s cost and will be paid under separate head. All acccessories included in the panel cost such as rotary handles, Spreader link and its accessories & metering etc.The panel should be got inspected / tes ted in the factory premises by the Engineer-in-charge / consultant before brought at site after approval of all drawings of the pane l. " |
| 529 | "INCOMER MCCB FP 63A.= 1 NO. Spreader Link = 1 NO. Rotary Handle = 1 NO. Voltmeter With VSS = 1 NO. Ammeter With ASS = 1 NO. RYB Indication Lamp LED= 3 NO. 63/5Amp. 15 VA CL-1 Current Transformer = 3 NO. 06Amp. Control SP MCB= 3 NO. CT Short Link = 3 NO. OUTGOING MCB FP 40A. 10KA.= 3 NO. MCB FP 32A. 10KA. =2 NO. MCB DP 32A. 10KA.= 1 NO. Space for Controller Light = 1 NO.ENCLOSURE & ACCESSORIES Fabrication in 14/16G.CRCA Sheet Powder Coating in SiemensGray Shade,75x40mm.Channel Base Frame, Cable Entry will be Top & Botto m Suitablefor Cable ,Lock, Rubber Gasket,hardwareetc.PANEL SIZE :- :-1740MM.(H) X1200MM.(W) X 450MM. (D) BUS BAR & HARDWARE 200A.Aluminium Main Bus Bar,Load wise Sub Feeder Bus Bar Colour Coated Heat ShrinkBus Bar sleave Nut-Bolt,Washer ,Hardwareetc. WIRING & ACCESSORIES Power & Control Wiring will be (ISI 1100V) flamc smoke FRLS PVC Single Core Copper Wire,Copper Lugs, PVC Sleeve, Ferruels Numbers,Hardware & Labour etc." |
| 530 | "Providing, installation testing & commissioning of "Silent Type" Diesel Generating Set along with having prime power rating 62.5 KV A, 415 Volts at 1500 RPM, 0.8 lagging Factor at 415 V suitable for 50 Hz, 3 phase system and for 0.80 load factor as given in tendertechnical specification including the followings:- Diesel Engine Diesel Engine 4 stroke radiator cooled, electric start, of suitable BHP not less than 102 at 1500 RPM suitable for above output of a lternator at 400C, 50% RH & at 1000 metre MSL and confirming to BS 5514, BS 649, is 10000, capable of taking 10% overloading for onehour after 12 hours of continuous operation. The engine will be fitted complete with all the required accessories. Make:- Kirloskar Green, Cummins ,CAT Engine Mounted Instrument Panel fitted with and having digital display for following: Start- stop switch with key. Water Temperature indication Lubrication Oil pressure indication Battery charging indication RPM indication Over Speed trip Indication Low lubrication oil trip indication Engine Hours Indication IOT enabled (KRM) " |
| 531 | "Alternator: Synchronous alternator rated at 62.5 KVA, 415 Volts at 1500 RPM, 3 phase 50 Hz, AC Supply with 0.8 lagging power factor at 400C, 50%RH & at 1000 metre MSL. The alternator shall be having SPDB enclosure, brushless, continuous duty, self-excited and self-regulated through AVR confirming to IS:4722/ BS 2613 suitable for tropical conditions and with class- H insulation. Alternator shall have end termination of Cable Box on alternator to terminate the suitable runs of Aluminium Armoured Cable. Make:- Kirloskar Green, Stamford, Leroysomer Base Frame & Foundation Both the engine and alternator shall be mounted on suitable base frame made of sheet with necessary reinforcement which shall be ins talled on suitable cement concrete foundation and vibration isolation arrangement as per recommendations of manufacturer. Fuel Tank: fuel tank of 150 litres capacity, fabricated out of 3mm thick M.S. sheet complete with all standard accessories and fuel piping betw een fuel tank and diesel engine with MS class "C pipes of suitable dia. Complete with valves level indication & accessories as requi red as per specifications. Exhaust System : Dry exhaust mainfold with hospital / Residentail grade exhaust silencer. " |
| 532 | "Starting System: 12V DC starting system comprising of starter motors: voltage regulator and arrangement for initial excitation complete with 1 No of batterie (120 AH) lead Acid type as required as per specifications. Accoustic and weather proof enclosure with arrangement for fresh air intake for cooling of the engine & alternator, extraction, disc harging hot air into the atmosphere as per specifications.The Acoustic Enclosure shall be factory fitted by the OEM. Diesel Generating Set 62.5 KVA including Acoustic Enclosure. described as above. EXHAUST PIPING Supply, Installation, Testing and Commissioning of following sizes MS exhaust piping heavy duty conforming to IS:3589 completewithall accessories such asbends, flanges, stainless steel flexible bellows etc.as required.125 mm dia MS pipe. (5.0 mm thick)Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in pos ition and applying a priming coat of approved steel primer using structural steel etc. as required.The contractor shall submit thestructure strength calculation for approval before execution. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. D.G. AMF PANEL Srandard AMF consists of two contractor of 125 amps (Mains & Genset) with one MCCB of DG set, all the arrangement to start/off the G enset when power supply off/on with auto changeover of load" |
| 533 | XLPE/ PVC INSULATED ARMOURED CABLES : |
| 534 | Supply, testing and commissioning of aluminium / copper conductor XLPE/ P.V.C. insulated armoured and served cable to be laid as perrequirement at the site of workincluding all petty material required to complete the job. upto entire satisfaction of the Eingeer -in-charge/ Consultant. |
| 535 | SupplyTesting and Commisioning of Copper conductor XLPE insulated armoured and served cableas per requirement at the site of wor k upto entire satisfaction of the Eingeer-in-charge. :-(Make Polycab / KEI / Havells/SVARN) 6sq.mm 3Core |
| 536 | SupplyTesting and Commisioning of Copper conductor XLPE insulated armoured and served cableas per requirement at the site of wor k upto entire satisfaction of the Eingeer-in-charge. :-(Make Polycab / KEI / Havells/SVARN) 10sq.mm 2Core |
| 537 | Supply Testing and Commisioning ofaluminium conductor XLPE insulated armoured and served cableas per requirement at the site of work upto entire satisfaction of the Eingeer-in-charge. :-(Make Polycab / KEI / Havells/SVARN) 25sq.mm 4Core |
| 538 | Supply Testing and Commisioning ofaluminium conductor XLPE insulated armoured and served cableas per requirement at the site of work upto entire satisfaction of the Eingeer-in-charge. :-(Make Polycab / KEI / Havells/SVARN) 120 sq.mm 3.5Core |
| 539 | Supply, installation, testing and commissioning of IP20 led fixture 12 W +/- 2 W LED Surface Mounted Downlighter Round Shape with mi nimum system lumen efficacy of 100 lm/W with Polycarbonate housing,pressure die cast heat sink and P.F.>0.95 with THD<10% ,CRI 80.Th e LED with Useful life of 50000 Hrs at L70. The LEDs used in the luminaire shall have CCT of ANSI Bin 5700 K with CRI of minimum 80. The Input voltage range shall be 100V to 265V. including cost of all petty materials required to complete the job in all respect. Ma ke: Phlips, Wipro, or any other approved vendor. |
| 540 | Supply, installation, testing and commissioning ofIP20 led fixture 15 W +/- 2 W LED Surface Mounted Downlighter Round Shape with m inimum system lumen efficacy of 100 lm/W with Polycarbonate housing,pressure die cast heat sink and P.F.>0.95 with THD<10% ,CRI 80.T he LED with Useful life of 50000 Hrs at L70. The LEDs used in the luminaire shall have CCT of ANSI Bin 5700 K with CRI of minimum 80 .The Input voltage range shall be 100V to 265V. including cost of all petty materials required to complete the job in all respect. M ake: Philips, Wipro, or any other approved vendor. |
| 541 | Supply, installation, testing and commissioning of led fixture 9 W +/- 2 W LED Recess Mounted Downlighter with Deep inset diffuser f or glare free lighting. Round Shape Fixture having Die Cast Heat housing and minimum system lumen efficacy of 100 lm/W with P.F.>0.9 5 and THD<10% ,CRI 80.The LED with Useful life of 50000 Hrs at L70 ,CCT of 5700 K with CRI of minimum 80.The Input voltage range sha ll be 150V to 270V .Fixture have Surge Protection 2kV. including cost of all petty materials required to complete the job in all res pect.Make: Philips, Wipro, or any other approved vendor. |
| 542 | Supply, installation, testing and commissioningled fixture 12 W +/- 2 W LED Recess Mounted Downlighter with Deep inset diffuser fo r glare free lighting. Round Shape Fixture having Die Cast Heat housing and minimum system lumen efficacy of 100 lm/W with P.F.>0.95and THD<10% ,CRI 80.The LED with Useful life of 50000 Hrs at L70 ,CCT of 5700 K with CRI of minimum 80.The Input voltage range shal l be 150V to 270V .Fixture have Surge Protection 2kV.including cost of all petty materials required to complete the job in all res pect.Make: Philips, Wipro, or any other approved vendor. |
| 543 | Supply, installation, testing and commissioning of led fixture 15 W +/- 2 W LED Recess Mounted Downlighter with Deep inset diffuser for glare free lighting. Round Shape Fixture having Die Cast Heat housing and minimum system lumen efficacy of 100 lm/W with P.F.>0. 95 and THD<10% ,CRI 80.The LED with Useful life of 50000 Hrs at L70 ,CCT of 5700 K with CRI of minimum 80.The Input voltage range sh all be 150V to 270V .Fixture have Surge Protection 2kV. including cost of all petty materials required to complete the job in all re spect.Make :-Phlips, Wipro, or any other approved vendor. |
| 544 | Supply, installation, testing and commissioning of surface mounted cylindrical led downlighter 10W +/- 2W Fixture having inset clearglass diffuser with extruded aluminium black housing having system lumen efficacy of 80 lm/W with P.F.>0.95 and THD<10% with beam a ngle 36 degree .The LEDs with minimum life of 50000 Hrs. The LEDs used in the luminaire shall have CCT of ANSI Bin 4000 K and CRI ofminimum 80 with surge protection of 2 KV. including cost of all petty materials required to complete the job in all respect.Make:Phlips, Wipro, or any other approved vendor. |
| 545 | " Supply, installation, testing and commissioning of Led fixture 600mmX600mm 36 W+/- 2W Recess mounted fixture with HET Plastic diff user with minimum system lumen output of 3600 lumens and system lumen efficacy of 100 lm/W with CRCA housing having P.F.>0.95 with T HD<10% ,CRI 80.The LED with Useful life of 50000 Hrs at L70. The LEDs used in the luminaire shall have CCT of 5700 K with CRI of min imum 80. The Input voltage range shall be 150V to 270V .Fixture have Surge Protection 2kV .Driver Output voltage shall be less than SELV Limits for safe operation and maintenance.includ ing cost of all petty materials required to complete the job in all respect. Make: Philips,Wipro,or any other approved vendor ." |
| 546 | " Supply, installation, testing and commissioning of IP20 Led fixture 10 W+/- 2W with Surface Mounted 2 Feet with Polycarbonate diffuser with Extruded aluminium housing minimum system lumen output 1000 lumens and system efficacy of 100 lm/W with P.F.>0.95 with THD<20% ,CRI 80 .The LED with Useful life of 50000 Hrs at L70. The LEDs used in the luminaire shall have CCT of ANSI Bin 6500 K with CRI of minimum 80.The Input voltage range shall be 150V to 270V.including cost of all petty materials required to complete the job in all respect. Make:Philips,Wipro,or any other approved vendor." |
| 547 | " Supply, installation, testing and commissioning ofIP20 Led fixture 20 W+/- 2W with Surface Mounted 4 Feet with Polycarbonate diffuser with Extruded aluminium housing minimum system lumen output 2000 lumens and system efficacy of 100 Lm/W with P.F.>0.95 with THD<20% ,CRI 80 .The LED with Useful life of 50000 Hrs at L70. The LEDs used in the luminaire shall have CCT of ANSI Bin 6500 K with CRI of minimum 80.The Input voltage range shall be 150V to 270V.including cost of all petty materials required to complete the job in all respect.Make Philips,Wipro,or any other approved vendor." |
| 548 | Supply, installation, testing and commissioning of 35 W +/- 2W Round Hollow ring suspended fixture having Housing made up of extrude d Aluminum powder coated White/Black Housing with 100lm/W ,THD<10%,PF>=0.95 CRI 80 and CCT of 4000K only with High efficiency, non-y ellowing PMMA diffuser having dia of 600 mm.including cost of all petty materials required to complete the job in all respect.Ma ke: Philips, Wipro, or any other approved vendor. |
| 549 | " Supply, installation, testing and commissioning ofIP40 Led fixture 40 W+/- 2W with Surface Mounted 4 Feet with with anodised aluminium reflector Polycarbonate diffuser with aluminium housing minimum lumen output 4400 lumens and system lumen efficac y of 110 lm/W with P.F.>0.95 with THD<10% ,CCT 5700K, CRI 80,Surge Protection 3 KV .The LEDs with minimum life of 50000 burning hour s. The Input voltage range shall be 150V to 270V. including cost of all petty materials required to complete the job in all respect.Make: Phlips, Wipro, or any other approved vendor." |
| 550 | Supply, installation, testing and commissioning of Garnet Indoor Wall light with 360 Degree light 9W +/- 2W Fixture. The LEDs used i n the luminaire shall have CCT of ANSI Bin 2700 K . including cost of all petty materials required to complete the job in all respec t. Wipro Cat. DW10927 or Equivalent in Philips & or any other approved vendor. |
| 551 | Supply, installation, testing and commissioning of Wall Light suitable for LED lamp with E27 holder. including cost of all petty mat erials required to complete the job in all respect. Wipro Cat. LM91-L180-CRWH or Equivalent in Philips & or any other approved vendo r. |
| 552 | Supply, installation, testing and commissioning of IP65 Bulkhead led fixture 10 W +/- 2 W Wall Mounted with minimum system lumen eff icacy of 100 lm/W with Pressure Die Cast Aluminum housing, Polycarbonate Opal Diffuser and P.F.>0.95 with THD<10% ,CRI 80.The LED sh all be tested with LM80-08 standard with Useful life of 50000 Hrs at L70. The LEDs used in the luminaire shall have CCT of ANSI Bin 5000K- 5700 K only with CRI of minimum 80.The Input voltage range shall be 140V to 280V with 2.5 kV Surge Protection. including costof all petty materials required to complete the job in all respect. Make: Philips, Wipro, or any other approved vendor. |
| 553 | Supply, installation, testing and commissioning of Decorative Teardrop having dia of 320mm for LED lamp with E27 holder. including c ost of all petty materials required to complete the job in all respect. Wipro Cat. Code: LM87-D320-BLGD or Equivalent in Philips/or any other approved vendor. |
| 554 | " Supply, installation, testing and commissioning of Led fixture 600mmX600mm 36 W+/- 2W Surface mounted fixture with HET Plastic dif fuser with minimum system lumen output of 3600 lumens and system lumen efficacy of 100 lm/W with CRCA housing having P.F.>0.95 with THD<10% ,CRI 80.The LED with Useful life of 50000 Hrs at L70. The LEDs used in the luminaire shall have CCT of 5700 K with CRI of mi nimum 80. The Input voltage range shall be 150V to 270V .Fixture have Surge Protection 2kV .Driver Output voltage shall be less than SELV Limits for safe operation and maintenance. includi ng cost of all petty materials required to complete the job in all respect. Make: Philips,Wipro,or any other approved vendor." |
| 555 | Supply, installation, testing and commissioning of 7 W+/-1 W LED Whistling Speaker Bollard, Floor Mounted, Extruded Aluminium Housin g with PC lens Diffuser, minimum system lumens of 209, Height 800mm. The luminaire shall have CCT of 3000K and CRI of minimum 70, PF >0.90 and THD<25%. The luminaire shall have IP65 protection. The LED shall be compliant with Useful L70 life of 50000 Hrs. Driver ef ficiency should be 80% to operate in input voltage range of 180V to 270V (nominal rated voltage – 230V) with 2 KV internal surge pro tection. including cost of all petty materials required to complete the job in all respect.Make: Philips, Wipro, or any other appr oved vendor. |
| 556 | Supply, installation, testing and commissioning of 45 W+/-2 W LED Post Top Luminaire Pole mounted, Al Die cast Housing , High PurityPC lens Diffuser, minimum system lumens of 3500. The luminaire shall have CCT of 4000K and CRI of minimum 70, PF>0.95 and THD<10%. The luminaire shall have IP66 and IK08 protection. The LED shall be compliant with Useful L70 life of 50000 Hrs. Driver efficiency s hould be 85% to operate in input voltage range of 150V to 300V (nominal rated voltage – 240V) with 4 KV internal surge protection. including cost of all petty materials required to complete the job in all respect. Wipro Cat. No: Wipro LP09-501-XXX-40-XX or Equiva lent in Philips/or any other approved vendor. |
| 557 | " Supply, installation, testing and commissioning of architectural 6 W Floor mounted, Al Die cast Housing , powder coated, Tempered Frosted Step Glass. Fixture consruction shall be of aluminium die cast Hosuing having High Purity Lens and clear tempered glass withdeep inset LEDs for achieveing desired beam angle and Glare free light with minimum system lumens of 450 with silicone gasket for use in Dry,Damp and wet locations. Fixture designed to directly install o n the ground with help of mounting screws . LED have useful life 50000 Hrs as per LM80.Fixture should withstand input voltage range form 100V-240V and operating temperature range form -20degC to 40degC .Fixture should have beam angle of 30 degree with CCT of 3000K . The luminaire shall have IP67 protection. The LED shall be compliant with Useful L70 life of 50000 Hrs.including cost of all pet ty materials required to complete the job in all respect. Make: Philips, Wipro,or any other approved vendor." |
| 558 | " Supply, installation, testing and commissioning of architectural throw adjustable LED Bushlight in 8W. Fixture consruction shall b e of Aluminium Hosuing having High Purity Lens and clear tempered glass with deep inset LEDs for achieveing desired beam angle and Glare free light with minimum system lumens of 600 with IP>=67 for use in Dry,Damp and wet locatio ns. Fixture designed to directly install on the ground with help of adjsutable mounting brackets screws for ease of mounting. LED ha ve useful life 50000 Hrs as per LM80.Fixture should withstand input voltage range form 100V-240V and operating temperature range for m -20degC to 40degC with CCT of 2700K .Fixture should have beam angle of NB/WB distribution degree alongwith throw adjustment option . .Fixture Should be BIS ,EN62471 and IS 10322 approved.including cost of all petty materials required to complete the job in all respect. Make: Philips, Wipro,or any other approved vendor." |
| 559 | Supply, installation, testing and commissioning ofIP67 S/T type Connector Suitable for 2C for Connecting multiple Fixtures with Si ngle Driver to increase system efficiency.including cost of all petty materials required to complete the job in all respect. Make:Philips, Wipro,or any other approved vendor. |
| 560 | Supply, installation, testing and commissioning of 100W > IP 65 LED Driver Suitable for Driving LEDs with input operating volatge of150V-270V having inbuilt surge protection of 3KV minimum and Minimum conversion efficiency of 85%.including cost of all petty mat erials required to complete the job in all respect. Make: Philips, Wipro,or any other approved vendor. |
| 561 | " Supply, installation, testing and commissioning of 25 W+/- 1W All-In-One Hybrid Solar Streetlight, Pole Mounted, Al Die cast Housi ng, PC lens Diffuser, minimum system lumen efficacy of 150 lm/W, System voltage 12.8V, Output Current: 0.225A-0.800A, No load loss < 20mA, Charging Current 2A, Solar input voltage <22V, Over voltage protection 14.8V, Charging Voltage limit 14.6V. The luminaire shal l have CCT of 5700K and CRI of minimum 70. The luminaire shall have IP65 and IK08 protection. The LED shall be compliant with UsefulL70 life of 50000 Hrs. The luminaire have 40Wp High Efficiency Monocrystalline Silicon Panel, 24Ah LiFePO4 Battery, High EfficiencyBattery with higher life of >2000 cycles, Full Power up to 10Hrs, Saving mode up to 30Hrs at fully charged battery, Integral PIR se nsor for motion detection, MPPT charge controller with 90-96% efficiency with 4 KV internal surge protection.including cost of all petty materialsrequired to complete the job in all respect. Wipro Cat. No: Wipro LR19-461-XXX-57-HY or Equivalent in Philips/or any other Register ed vendor with MNRE." |
| 562 | Supply, installation, testing and commissioning of IP20 LED Strip Light in 5mtr spool in 5W/ Mtr with minimum system lumen output of375 lm/mtr having Polymide double Side PCB Housing with CCT of 4000K having surge protection of 3 KV. Fixture designed to directly install on Floor,wall with aluminium profile included with the fixture. included Driver. including cost of all petty materials req uired to complete the job in all respect. Wipro Cat. No: Wipro LS06-005-120-40-50 or Equivalent in Philips/or any other approved ven dor. |
| 563 | Supply, Installation, Testing and Commissioning and erection of Exhaust fan 15"" heavy duty 900 rpm complete with shutter (ISI mark)including cost of petty material required to complete the job in all respect.Make:- Crompton (Alpahabriz), Usha (Swift) , Armonar d, AncharPanasonic( ANMOL). |
| 564 | Supply, Installation, Testing and Commissioning and erection of FRESH AIR fan 10""900 rpm complete with shutter (ISI mark) includi ng cost of petty material required to complete the job in all respect.Make:- Crompton ( Alpahabriz), Usha (Swift) , Armonard, Anchar Panasonic( KOOLAIR). |
| 565 | Supply, Installation, Testing and Commissioning and erection of wall fan complete with shutter (ISI mark) including cost of petty ma terial required to complete the job in all respect.(Make Crompton, Havells or Armonard , panasonic) |
| 566 | """ Supply, Installation, Testing and commissioning of 8 Passenger elevator with 4 stops without machine room as per specification M AKE:- KONE, OTIS, SCHINDLER."" Basic elevator data Elevator Type :- Passenger elevator PWI08/10-19 Product :- IMonospace Gearless Machineroom less Elevator No of Units :- 1 Load & Capacity :- 544 kg or 8 persons Speed :- 1 m/s Stops & Openings :-4 stops & 4 openings, Single entrance car ""Elevator Grouping :- Simplex Full Collective Control"" Well Dimension :- 1750 mm width and 1620 mm depth (required) Head Room height :- 3700 mm (required) Pit Height :-1500 mm (required) MAP Floor Position :- Topmost floor (TOP) Car dimensions :- 1100 mm wide x 1300 mm deep x 2300 mm high Door dimensions :- 800 mm wide x 2100 mm internal height Door type :- Two-panel centre opening Plain Pane Finishes Car design :- SS -Moon rock Finish Car Panel Finish :- SS -Moon rock Finish Handrail :- Round Bend Handrail Silver brushed stainless steel (ST4) at Rear Wall Ceiling & Lighting :- Integrated Roof RL20 Stainless Steel Ring Lighting LED Flooring :- Flooring 20 mm recess for flooring ,flooring in customer scope Car skirting material: Stainless steel Hairline AISI441 Car Door Finish :- SS -Moon rock Finish Floor number :- 1-5 Floor Mark :- 0, 1, 2, 3, 4 ""Interfloor distance :- 2950 mm, 3500 mm, 3500 mm, 3500 mm"" Landing door material :- SS -Moon rock Finish Car operating panel:- 1 Full Height Stainless Steel Face Plate Silver brushed StSt Segmented LCD display Square surface mounted Bu ttons KDS90 Landing Signalization :- Stainless Steel 7 segment display Flush Mounted Silver brushed StSt Square ,surface mounted KDS90 Features ""Standard :- Car Emergency Light Fireman Drive Curtain of Light 169 Beams Accurate Relevelling, Automatic, Closed Door"" ""Emergency Rescue Device with audio announcer 2 Way Dedicated Intercom Nudging service Attendant Service Ring Lighting LED"" ""Advance Safety Features :- ? Automatic Brake Inspection -Every Day automatic brake testing to ensure safe and smooth travel. ? Manual Rescue Lever-Mechanical Operated ? Full Height Door Sensors-169 beams ? Inbuild Car Gate lock for safety of Passenger-Automatic locks the car doors when stuck between floors. ? 2 Hours fire rated landing doors"" Other Features :- ?Battery Operated Emergency Light with Rechargeable Battery ?Battery Operated Emergency Alarm with Rechargeable Battery ?Micro Movement L.E.D. based Buttons ?Load Weighing device with overload Bypass feature ?Automatic Phase Reversal Protection ?Handrail on Rear Side ?Double Phase - Fire Man Drive ?Fire Man Switch at Main Lobby ?Motor compatible for 180 Starts Per hour. ?Power Saving Mode in Ideal Condition" |
| 567 | "SITC of intelligent addressable 2 Loop Main Fire alarm panel complete with sufficient number of loops to accommodate all the BOQ qu antity with at least 20% spare capacity on each loop, LCD/VGA display with at least 160 character, Zonal LED indication, Network com munication module for peer to peer networking of more panels, Repeater interface, USB port and power supply unit with battery back-u p for at least 30 min during alarm and 48 hours standby. Each loop should be capable of accommodating at least 99 detectors and 99 m odules. The panel shall be complete and approved by EN/LPCB/UL/VdS. (Bidder may propose a different panel/loop configuration and per manufactuer"s capacity suitable to accommodate at least 200 detecto rs and 200 modules) " |
| 568 | 2 Loop Panel |
| 569 | "SITC of Intelligent addressable ACTIVE repeater panel with VGA /LCD display with minimum 160 character, Controls, networkable,pow er supply unit with battery backup for at least 48 hours. Panel should have its own standalone battery back-up and should be LPCB/UL /VdS/EN approved. " |
| 570 | DETECTORS & CALL POINTS |
| 571 | "SITC of Intelligent addressable multi-criteria (Photo smoke + Rate of Rise heat + Fixed temp) heat detectors with decentralised int elligence and base. Detector shall beLPCB/UL/VdS/EN approved. (For True ceiling and below false ceiling) " |
| 572 | "SITC of Addressable Manual Call point complete with back boxes and as per technical specifications (LPCB/UL/VdS/EN approved). " |
| 573 | "SITC of Intelligent addressable multi-criteria (Photo smoke + Rate of Rise heat + Fixed temp) heat detectors with Sounder with dece ntralised intelligence and base with at least 4 selectable tone setting and 2 volume setting. Detector shall beLPCB/UL/VdS/EN appr oved. " |
| 574 | HOOTER CUM STROBES |
| 575 | "SITC Hooters cum strobe of the same make and listing as fire alarm panel complete with at least 4 selectable tone setting and 2 vol ume setting. (LPCB/UL/VdS approved) " |
| 576 | "SITC Addressable control module for hooter cum strobes complete as per specifications (LPCB/UL/VdS approved) " |
| 577 | 24VDC, 10 AMP Power supply unitsfor the Hooter cum strobes. |
| 578 | "SITC of Addressable monitor modules for monitoring the health of power supply unit through main fire alarm panel (LPCB/UL/VdS appro ved) " |
| 579 | MODULES |
| 580 | "Supplying, installation, testing and commissioning of Fault isolator Base capable of monitoring shorted loop circuit and automatica lly restore communications when shorted conditions are corrected - (LPCB/UL/VdS approved) " |
| 581 | "SITC of Control/Relay module for controlling third party equipment like AHU, Pressurisation fans, Smoke extraction fans, Ventilatio n fans, Lifts, Water curtains, Access control system, etc. in case of fire complete as per specifications (LPCB/UL/VdS approved) " |
| 582 | "SITC of addressable monitor module for integration of third party equipment like Flow switches, pressure switches, deluge valves, C O sensors, etc through fire alarm panel. " |
| 583 | CABLES FOR FIRE ALARM SYSTEM SYSTEM |
| 584 | "Supply & installation of Fire Survival unarmoured cable (300/500V) To be clamped directly to the robust ceiling complete with termi nation and testing as per requirement.(For fire alarm loop components) " |
| 585 | "Supply & installation of Fire Survival unarmoured cable (300/500V) To be clamped directly to the robust ceiling complete with termi nation and testing as per requirement.(For hooter cum strobes) " |
| 586 | EPABX |
| 587 | "SITC of EPBAX for total of 29 Extension points for each room and toilet in Guest House. " |
| 588 | "Supply & installation of Fire Survival unarmoured cable (300/500V) To be clamped directly to the robust ceiling complete with termi nation and testing as per requirement.(For EPBAX System) " |
| 589 | CCTV |
| 590 | "Supply, installation, testing & commissioning of 2 MP IP Dome Camera, 1/2.9"" CMOS, 2.8mm Fixed Lens, F2.0, Fixed Iris, Digital WDR , 30m IR, 0.02Lux, 1920x1080@30fps, 512 GB SD card slot, Built-in Mic, Reset Button, IP67, PoE. " |
| 591 | Supply, installation, testing and commissioning of Outdoor IP Bullet camera 1/2.9" CMOS, F2.0, Fixed Iris, Digital WDR, 50m IR, 0.02 Lux, 1920x1080@30fps, Built-in Mic, Reset Button, IP67, Progressive Scan, Day/Night, Automatic day/night, HDTV 1080p, Dual streaming , 25 FPS, Motion Detection, Wide dynamic Range, PoE & standard 12VDC/24VAC power input, as per detailed specifications. cost shall b e inclusive of fixing accessories such as stand etc. Camera should be POE Enabled & also ONVIF compliant Make : Avtron |
| 592 | 32" Commercial Series LED |
| 593 | "Supply, installation, testing & commissioning of 20CH Standalone NVR,120Mbps/100Mbps, recording resolution up to 8MP, decoding ab ility 1*8MP, 4*1080p, 8*720p, video output: 1 HDMI & 1VGA simultaneous output, alarm I/O 4/1, USB interface: 2xUSB 2.0, ANR, N+M, Su pport 1SATA with 8 TB HDD and support upto 10 TB. " |
| 594 | "SITCof:HDMI/VGA Cable5Meter Gold Plated forControl room Monitor " |
| 595 | "Supply,installation,testing and commissioning of8 port 10/100/1000 POE switch power budget 60 watt complete with all fixing acces sories as per site requirements as required. " |
| 596 | Supply, Installation, Testing & Commissioning of CAT-6 Cable for video & Power signal in existing recessed/surface and in ground PVC /MS/GI pipe complite with termination as required. |
| 597 | "Supply & fixing heavy duty FRLS25 mm dia PVC conduitConduit complite with fixing accessories in surface/recessed,painting as re quired. " |
| 598 | "Supply Installation testing commissioing of Rack 6U 500mm (Depth) with front glass door Fan Housing Unit with fans, Cable manager, PDU, Mounting Hardware , complete with all accessories. " |
| 599 | "Supply, Installation, Testing & Commissioning of Patch Cord and patch panel as required. " |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
