Military Engineer Services-MES has published Tender For Additions And Alterations Including Improvements To Living In Billets For Airmen At Air Force Station Utarlai. Submission Date for this Tender is 29-04-2023. Building Work Tenders in utarlai Rajasthan. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 22-Apr-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 29-04-2023 |
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frame with shutter (without taking off shutter from the frame) exc 1.5 Sqm but n exc 4 Sqm each complete all as specified and directed. |
| 2 | Taking down chowkats or frame with shutter (without taking off shutter from the frame) not exc 1.5 Sqm each complete all as specified and directed. |
| 3 | Taking down shutters of any descriptionexc 1 Sqm and n exc 2 Sqm each, resecuring or easing and adjusting and refixing in the same opening complete all as specified and directed |
| 4 | Taking down shutters of any descriptionexc 1 Sqm and n exc 2 Sqm each complete all as specified and directed. |
| 5 | Taking down cement plaster of any description, on brick or stone walls/ceiling etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed |
| 6 | Taking down existing roof treatment of any description and thickness including plastering/screed , leaping plaster/ padding of any description, cutting and uprooting trees roots/vegtation grouth and removing debriss from the premises upto 500m outside the MoD land inclding cleaning and washing down and keeping surface clean complete all as specified and directed |
| 7 | Dismantling floor, hearth or wall tiling including cement mortar beading (but not backing), removing serviceable tiles from site store and rubbish off the premises complete all as specified and directed. |
| 8 | Demolition of brick/stone/block/PCC block work masonry built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar faces and precast concrete articles complete all as specified and directed. |
| 9 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for and removal of demolised materilas to a distance exceeding 250m but not exceeding 500m complete all as specified and directed. |
| 10 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) complete all as specified and directed. |
| 11 | Demolition of precast RCC articles built in cement mortar including all quoins, arches, pillars, etc. and removing from site all as specified and directed. |
| 12 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc.laid, bedded and pointed in any mortar. |
| 13 | Taking up or down 15mm dia steel tubing and connections and fittings, including cleaning for refixing or removal from site complete all as specified and directed. |
| 14 | Taking up or down 20mm dia steel tubing and connections and fittings, including cleaning for refixing or removal from site complete all as specified and directed. |
| 15 | Taking up or down 25mm dia steel tubing and connections and fittings, including cleaning for refixing or removal from site complete all as specified and directed. |
| 16 | Dismantaling of water tanks of capacity exc 250 litres and n.exc 500 litres and removing from site complete all as specified and directed. |
| 17 | Dismantling 75mm bore cast iron soil, waste and vent pipes fixed on walls or laid in floors including fittings and taking out including removing from site complete all as specified and directed. |
| 18 | Dismantling 100mm bore cast iron soil, waste and vent pipes fixed on walls or laid in floors including fittings and taking out including removing from site complete all as specified and directed. |
| 19 | Demolition and breaking up 100mm internal diameter/bore drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar including removing from site complete all as specified and directed. |
| 20 | Demolition and breaking up 150mm internal diameter/bore drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar including removing from site complete all as specified and directed. |
| 21 | Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads including punching or drilling out old glazing pins/springs clips also providing and fixing new ones complete all as specified and directed. |
| 22 | Excavating trenches in soft/loose soil, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, cesspits,manholes, pier holes, water/sewer pipe line, cable line etc not exceeding 10 Sqm area on plan and not exceeding 1.5 m in depth and getting out complete all as specified and directed. |
| 23 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm with soft disintegrated rock complete all as specified and directed |
| 24 | Removing excavated material to a distance exceeding 250 m but not exceeding 500 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed |
| 25 | S&F 35 mm thick factory made 2nd class hard wood plain, framed , paneled shutters (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS 1003 (Part-I) , kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 26 | S&F 35 mm thick factory made 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze,etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing lass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats. The size of rail and stile as per IS 1003 (Part-I) , kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 27 | S&F solid PVC door frame of size 50mmx47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube fixed in opening as in door and cabinet of wash hand basin counter.as per specifications and making good the plaster of wall in cement mortar (1:6) completeall as per specifications and drawings. |
| 28 | S&F 30mm thick (Style) factory made solid panel shutter (PVC)consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with heat molded plain colour PVC `C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail; Panelling ofplain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement as per specifications and drawings. |
| 29 | S&F 18/19mm Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work in cupboards, alimirah shutters or other placescomplete all as specified and directed |
| 30 | S&F factory made for box steel vantilator (with bottom portion fixed with pin headed glass pane and top portion with two top hungs shutters with one pin headed glass pane and other wiremesh with and including pressed steel frame of size 80X40X1.25mm thick filled with PCC and complete all as specified and shown on Drawings No. CEAA/TD/120 R dated 06 Jun 2002, Sheet no.1/4 to 4/4. Note:- (i) PCC for filling in chowkhats shall be measured and paid saperately. (ii) The cost of iron mongery and fittings as per shown on drgs shall be included in the quoted rate of this item. (iii) Gaurd bar/Grills shall be measured and paid saperately. |
| 31 | S&F factory made steel windows with side hung shutters including box type hinges with steel handle, steel peg stay, locking arrangement etc complete, one shutter with glazing bars for glass pens and other shutter without glazing bars for wiremesh, dovetailed or welded including pressed steel frame of size 80X40X1.25mm thick filled with PCC and complete all as specified and shown on Drawing No CEAA/TD/120 R dated 06 Jun 2002 Sheet No. 1/4 to 4/4. Note:-(i) PCC for filling in chowkhats shall be measured and paid saperately. (ii) The cost of iron mongery and fittings as per shown on drgs shall be included in the quoted rate of this item. (iii) Gaurd bar/Grills shall be measured and paid saperately. |
| 32 | S&F rolled mild steel in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming to Fe-290.Gde-E-165 complete all as specified and directed. |
| 33 | S&F framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-410W.Gde-E-250 Quality "A" complete all as specified and directed. |
| 34 | S&F framed work as in doors or gates or coolar stand or other places with angle, tee, channel or other section with gusset plates, rails, braces, etc, complete drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and incl either hooks and pintal hinges or steel hanging door fittings (exclusive of steel, sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete confirming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 35 | S & F10mm dia and over mild steel TMT bars , cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm diacomplete all as specified and as directed. |
| 36 | S&F for 125x60mm size pressed steel frame for doors with one or more rebates with andincluding necessary lugs, hinges, locks strike plateetccomplete all as specified and directed. |
| 37 | S&F mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples or wooden/aluminiumbeads complete all as specified and directed. |
| 38 | S&F in repairs mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples or wooden/aluminiumbeads complete all as specified and directed. |
| 39 | S&F3mm thick sheet glass ordinaary quality and glazing with oil putty in sqaure n.exc 0.5 sqm in each pane complete all as specified and directed |
| 40 | S&F in repairs, 25mm dia stainless steel curtain rod with brackets and knobs at both ends as per site requirement including taking down old existing PVC conduit pipes with accessories complete all as specified and directed. Note: (i) The cost of brackets and knobs deemed to be included in the quoted rate. Nothing extra shall be paid on this account. (ii) Bulbs andknobs decorative type shall be provided at free end. |
| 41 | S&F 100mm longstainless steel hinges medium weight rolled cold complete all as specified and directed |
| 42 | S&F 100mm longmild steel hinges medium weight rolled cold complete all as specified and directed |
| 43 | S&F 300mm long aluminium alloy anodized sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and directed. |
| 44 | S&F 200 mm long aluminium anodized barrel tower bolts of extruded section fixed complete all as specified and directed |
| 45 | S&F 150mm size extruded aluminium door handle fabricated type with base plate. anodised complete all as specified and directed |
| 46 | S&F 150 mm long (overall length of cover plate) floor door stopper of brass body and tongue with hard drawn steel spring complete all as specified and directed. |
| 47 | S&F 150mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete complete all as specified and directed. |
| 48 | M&L for 15 mm thick rendering cement plaster in cement mortar (1:6) on surfaces other than of fair faces of brick or concrete wall surfaces/ PCC Block masonry, finished even and smooth without using extra cement complete all as specified and directed |
| 49 | M&L for 15mm thick renderingcement plaster in cement mortar (1:4) on fair faces of brick or concrete wall and ceiling surfaces, mixed with water profing compound @3%by weight of cementfinished even and smooth without using extra cement complete all as specified and directed (Note:-Water proofing compound shall be measured and paid for separately) |
| 50 | M&L for 10mm thick dubbingout cement plaster in cement mortar (1:3) on irregularsurfacesof brick or concrete surfaces of walls and ceilings and finishedevenand smooth without using extra cementcomplete all as specified and directed. |
| 51 | M&L for5mm thick rendering cement plaster in cement mortar (1:3) onon surfaces of fair faces of brick or concrete surfaces in ceilings and finishedevenand smooth without using extra cementcomplete all as specified and directed. |
| 52 | Preparing new plastered surfaces of wallsand distempering with two coats of oil bound distemper (White or tinted) over one coat of primer after smoothening of surfaces complete all as specified and directed. |
| 53 | Preparing new plastered surfaces of wallsand distempering with two coats of cement base paint (White or tinted) over one coat of alkali resistant primer after smoothening of surfaces complete all as specified and directed. |
| 54 | Preparing old plastered surfaces of walls, filling up undulation and distempering with two coats of oil bound distemper(White or tinted) over one coat of 01 mm thick wallcare puttyafter smoothening of surfaces complete all as specified and directed. |
| 55 | Complete removal of existing treatment on walls, filling up undulation and distempering with two coats of cement base paint(White or tinted) over one coat of prmerafter smoothening of surfaces complete all as specified and directed. |
| 56 | Preparing old treated plastered surfaces ofwalls and applying two coats of white wash complete all as specified and directed. |
| 57 | Preparing old treated surfaces of ceiling and applying two coats of white wash complete all as specified and directed. |
| 58 | Preparing new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed. |
| 59 | Preparing new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 60 | Preparing old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 61 | Preparing new steel surfaces of any description, over 10cm in width or girth, not other wise described and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and directed. |
| 62 | Preparing old steel surfaces of any description, over 10cm in width or girth, not other wise described and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 63 | M&L for non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete to match in floor over andincluding 15 mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed. |
| 64 | M&L for Glazed ceramic coloured tiles(450mm x 300mm) x 7 mm thick on verticle surfaces such as skirtings, dados, risers and steps and the like, set and jointed in neat cement slurry and pointed in white or colour cement to match laid over and including 15 mm thick plaster in cement mortar1:4 complete all as specified and as directed. |
| 65 | M&L for 20-25mm thick Mirror-polished Machine cut Kota stone slab flooring over and including 20mm thick screed bed or bedding layerin cement mortar (1:6) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc. complete all as specified and directed. |
| 66 | M&L for 20-25mm thick prepolished Machine cut Kota stone slab flooring over and including 20mm thick screed bed or bedding layerin cement mortar (1:6) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc. complete all as specified and directed. |
| 67 | M&L for 20-25mm thick prepolished Machine cut Kota stone slab as inriser of steps, skirting, dados etcover and including 10 mm thick rendering in cement plaster (1:3) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and directed. |
| 68 | M&L for cement concrete (1:4:8)type D-2using 40mm graded stone aggregateas in foundations, filling and mass concrete in sunken portion filling after carrying out testing of CI pipes and joints and slab and walls by filling with water for 72 hours retention complete all as specified and directed. |
| 69 | M&L for 100mm thick cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as insunken floorfilling finished even and smooth without using extra cement including form work and filling joints with sealing compound all as specified and directed. |
| 70 | M&L for cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in roof padding andsurfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 71 | M&L for 75mm thick cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate as in plinth protection finished even and smooth without using extra cement including form work and filling joints with sealing compound all as specified and directed. |
| 72 | M&L for cement concrete (1:2:4) type B-0, using 10 mm graded crushed stone aggregate as incoved fillet 75mm radius to be provided at the junction of RCC slab andadjoining walls and on the top of sunken floor (surface of RCC slab) shall be finished to slope 1:40 towards spout pipe ,and the likeincluding weathering, slightly rounded or chamfered angles and throating, as directed including necessary form work etccomplete all as specified and directed. |
| 73 | M&L for precast reinforced cement concrete (1:2:4) type B-1, using 20 mm graded crushed stone aggregate as inmanhole cover slabs, chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain facesand the like and set in cement mortar (1:4); including weathering, slightly rounded or chamfered angles and throating including necessary form work as complete all as specified and directed. (Note : Reinforcement shall be measured and paid for separately) |
| 74 | M&L for precast cement concrete solid blocks masonry cement concrete (1:3:6) type C-I using 20mm graded stone aggregate, exc 10cm in width and set in cement mortar (1:6) etc complete all as specified and directed. |
| 75 | M&L for providing cement concrete (1;3:6) type C-1, using 20 mm graded crushed stone aggregate as in coping, surface channel of manholes/ drains, cills, hold fast, backfill of PS chowkhats, benching for manhole and the like; including weathering, slightly rounded or chamfered angles and throating including necessary form work as complete all as specified and directed. |
| 76 | M&L for25mm thick (measured solid) precast cement concrete solid blocks masonry cement concrete (1:2:4) type B-I using 10mm graded stone aggregate louvres and jallies, , including all mouldings but excluding frame (Pre cast frame shall be measured separately) and set in cement mortar (1:4) complete all as specified and directed. |
| 77 | S&F 0.50mm thick Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheetof an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified ®complete all as specified and directed. |
| 78 | Supply only integral water proofing compound complete all as specified and directed. |
| 79 | S&F stack clamps for 75mm bore CI pipe made out of 50mm x 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roofe complete all as specified and directed. |
| 80 | S&F stack clamps for 100mm bore CI pipe made out of 50mm x 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roofe complete all as specified and directed. |
| 81 | S&F 150 mm bore (internal dia) SGSW, laid on concrete bed to required slope in trenches and jointed complete all as specified and directed. Note:- Excavation, Earth workand Concrete bed shall be measured and paid separately) |
| 82 | M&L for cement concrete (1:3:6) type C-2 using 40 mm gradedcrushed stone aggregate as in concrete bed for 150 mm bore reinforced cement concrete pipes including packing under haunching against the sides of pipe after they are laid and tested complete all as specified and directed. |
| 83 | S&F 15mm bore galvanised steel water tubing ISI marked medium grade with necessary fittings unions, tees, elbows, bends, nipples, sockets, reducers and fixtures etc including necessary cutting, threading,laid in trenches/floors, fixed to walls and ceilingsetc complete all as specified and directed |
| 84 | S&F 20mm bore galvanised steel water tubing ISI marked medium grade with necessary fittings unions, tees, elbows, bends, nipples, sockets, reducers and fixtures etc including necessary cutting, threading,laid in trenches/floors, fixed to walls and ceilingsetc complete all as specified and directed |
| 85 | S&F 25mm bore galvanised steel water tubing ISI marked medium grade with necessary fittings unions, tees, elbows, bends, nipples, sockets, reducers and fixtures etc including necessary cutting, threading,laid in trenches/floors, fixed to walls and ceilingsetc complete all as specified and directed |
| 86 | Relaying or refixing 15mm bore galvanised steel water tubing ISI marked medium grade with necessary fittings unions, tees, elbows, bends, nipples, sockets, reducers and fixtures etc including necessary cutting, threading,laid in trenches/floors, fixed to walls and ceilingsetc complete all as specified and directed. (Note:- Old retrieved serviceable GI pipe shall be reused) |
| 87 | Relaying or refixing 20mm bore galvanised steel water tubing ISI marked medium grade with necessary fittings unions, tees, elbows, bends, nipples, sockets, reducers and fixtures etc including necessary cutting, threading,laid in trenches/floors, fixed to walls and ceilingsetc complete all as specified and directed. (Note:- Old retrieved serviceable GI pipe shall be reused) |
| 88 | Relaying or refixing 25mm bore galvanised steel water tubing ISI marked medium grade with necessary fittings unions, tees, elbows, bends, nipples, sockets, reducers and fixtures etc including necessary cutting, threading,laid in trenches/floors, fixed to walls and ceilingsetc complete all as specified and directed. (Note:- Old retrieved serviceable GI pipe shall be reused) |
| 89 | S&F 32mm bore galvanised steel water tubing ISI marked medium grade as in spout projecting 30cm beyond external surface of wall for sunken floor including providing gravel at mouth to prevent chocking of pipe complete all as specified and directed |
| 90 | S&F in repair vitreous china wash down water closet (Pedestal pattern) including connection to drain (or out going pipe) and fixing to flushing pipe, anti-sypohonage pipe etc. withplastic water closed seat cover (white) closedpattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device hinge device, complete all specified and directed. (Note:- PVC seat cover, flushing cistern and flush pipe shall be measeued and paid for supply only under respective items) |
| 91 | S & F in repairs vitreous China water closet Sqatting pan, "Orissa Pattern" size 580x440mm white with "P" or "S" trap front or back inlet and integral foot rests any pattern including connecting pipe of CI at suitable bore and length and including fixing of Cistern, flush pipe including provision of lean cement concrete bedding in PCC (1:5:10) type E-2 and making good to disturbed surface etc but excluding supply offlushing cistern and flush pipe complete all as specified and directed. (Note:-PVC seat cover, PVC flushing cistern and flush pipe shall be measeued and paid for supply only under respective items) |
| 92 | S&F in repairs wash hand basins, vitreous china( flat back) white of size 550mm X 400mm including cutting for and pinning in ends of brackets or erecting standincluding waste fittings, 32 mm bore PVC flush pipe with long screwed shucks and fly nuts and including PVC discharge pipe complete all as specified and directed. |
| 93 | S&F500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), double layered, ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. including 20mm dia ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 94 | S&F in repairs 10 litres capacity low level PVC valveless syphonic action type white flushing cistern with inlet ball valve, float and handle, 32mm bore PVC flush pipeincluding bracketscomplete all as specified and directed. |
| 95 | S & F in repair 20 mm bore gun metal, globe or gate valve with Iron wheel head screwed both ends for iron pipe complete all as specified and directed. |
| 96 | S&F in repairs 15mm bore brass chromium plated (fancy type) stop valve with long shank and cupconcealed type, crutch or butterfly handle, screwed down both ends for high pressure, as per ISI suitable for 15mm dia iron pipe complete all as specified and directed. |
| 97 | S&F in repairs 15mm bore brass chromium plated (fancy type) angle cock/valve, with crutch or butterfly handle, screwed down both ends for high pressure, as per ISI suitable for 15mm dia iron pipe complete all as specified and directed. |
| 98 | S&F in repair 15 mm dia bib tap cast copper alloy, Chromium plated ,"with crutch or butterfly handle, screwed down high pressure for iron pipe or for brass ferrule complete all as specified and directed. |
| 99 | S&F in repair 15 mm size PVC connection 600mm long with chromium plated brass nuts/adaptorscomplete all as specified and directed. |
| 100 | S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as spcified and directed. |
| 101 | Fix only old retrieved serviceable 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as spcified and directed. |
| 102 | S&F 100mm bore cast iron, sand cast, soil, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floors or fixed to walls complete all as specified and directed. |
| 103 | Fix only old retrieved serviceable100mm bore cast iron, sand cast, soil, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floors or fixed to walls complete all as specified and directed. |
| 104 | S&F 75mm bore cast iron, sand cast, soil, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floors or fixed to walls complete all as specified and directed. |
| 105 | Fix only old retrieved serviceable75mm bore cast iron, sand cast, soil, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floors or fixed to walls complete all as specified and directed. |
| 106 | S&F in repairs 75mm bore of outlet, cast iron floor trap,with stainless steel grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4)complete all as specified and directed. |
| 107 | S&F 75mm bore cast iron Bends (any radius), diminishing pieces or tapers (larger bore measured) bends/elbo with oval access door etc complete all as specified and directed. |
| 108 | S&F 100mm bore cast iron Bends (any radius), diminishing pieces or tapers (larger bore measured) bends/elbo with oval access door etc complete all as specified and directed. |
| 109 | S&F 75mm bore cast iron vent cowl complete all as specified and directed. |
| 110 | S&F 100mm bore cast iron vent cowl complete all as specified and directed. |
| 111 | S&F in repairs 150mm x 150mm salt-glazed stoneware gully traps, square or round mouthed, type "P" of sizewith 150mm dia outlet pipe set and jointed in cementmortar (1:1) complete all as specified and directed. |
| 112 | S&F 75mm bore Cast iron Tee, socket, Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed. |
| 113 | S&F 100mm bore Cast iron Tee, socket, Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed. |
| 114 | S&F in repair grating dome 125/150 mm dia of stainless steelwith or without hole complete all as specified and directed. |
| 115 | S&F in repairs Chromium plated shower rose 100 mm dia with 125mm long CP arms, with or without swivel joints, including fixing complete to steel pipe or union complete all as specified and directed. |
| 116 | M&L for 15 mm thick rendering cement plater in cement mortar (1:4) finished even & smooth without using extra cementandfor water proof surface of sunken floor mixed with water proofing compound as per manufacturer"s instructions complete all as specified and directed. |
| 117 | S&F in repairs20mm dia brass chromium plated tubular towel rail , "D" type, 60 cm long between flanges complete all as specified and as directed. |
| 118 | S&F 600mmx450mm size of specified thickness looking mirror, bevelled edge of selected quality glass with aluminium frame made of channel around, mounted on 6mm thick commercial ply or AC building board, fitted to wooden plug with chromiumplated brass screws and cup washers complete all as specified and directed. |
| 119 | S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 120 | M&L for 10mm thick screed bed in cement mortar (1:4) complete mixed with 3% water proofing compound as per manufacturer"s instructionsover roof top surface finished even and smooth using extra cement and application of water proofing treatment using APP modified roof membrane over existing assessible RCC roof slab/chajjah/ canopy/ parapet wall to be executed through apporved applicator of the membrane manufacturer with following specification etc complete all as specified and directed :- (a)Cleaning existing surface properly. (b) Applying oil bound bitumen primer @ 0.30 litre/ Sqm manufactured by the same agency as that of APP membrane with a density 0.87-0.89 Kg per liter at 25 degree centigrade on prepared surface. (c)Supply and lay not less than 3mm thick APP modified water proofing membrane weighing not less than 3.00 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160gsm/Sqm using butane torch by torch application with 10cm side laps and 15cm end laps. Physical property of membrane shall be as under:- (d)App membrane shall be laid using butane torch by torch application with minimum10cm side overlap and 15cm end lap. (Note :-Water proofing compound shall be measured and paid for seprerately under respective item of this BoQ) |
| 121 | M&L for Chipping of slab/columans/beams/chajjas/parapet/roof projection/balcony/staircase and removing loose mortar with chisel hammer without much impact on concrete surface, clean the surface by sand blasting the surface using river sand with minimum of 6 Kg pressure at the nozzle or air blow by electric pressure blower by mechanical compressor, cleaning the exposed reinforcement with wire brush & appliying CICO Clean-o-rust rust remover or equivalent in two coats over rusted reinforcement surface and providing anti corrosive coating with two component epoxy based zinc rich primer/Rust passivation Inhibitor coat at the rate of 5 Sqm/Litre with CICO ZINCIALTE-500 or equivalent ot reinforcement surface as per manufacturer"s instrucitons including all scaffolding, machinery, tools tackels and men materials and clearing of debries complete all as specified and as dierected. Make: CICO clean-O-rust, CICO ZINCILATE-500 or equivalent in Fosroc/Dr Fixit/ACC/L&T/DTPTP.Note :-The work shall be carried out upto 03 storey building or 12m ht. through authorised applicator or agent of the main manufacturer. |
| 122 | M&L for applying injection grouting through the nozzles, Driling the holes of 12 mm dia upto 10mm deep and fixing of nozzel of 10mm with using CICO NO.3 hardner chemicals. Inject the polymer based cement grount CICO NSPGC grout with cement to RCC wall/ ceilling in adequate pressure and seal the nozzel complete as per manufacturer"s instructions. Item rates are inlusive of all labour, chemicals, supervision, tools an tackles and transportation etc including extra cement, complete as per specificationsand as directed. Make : CICO No. 3 NSPGC grount hardner or equivalent in Dr Fixit/Fosroc/STP. Note :-The work shall be carried out upto 03 storey building or 12m height. through authorised applicator or agent of the main manufacturer. |
| 123 | M&L for applying bond coat with CICO-latex SBR or equivalent in Fosroc/Dr Fixit/STP/ Sikka as per manufacturer"s instructions, after preparing old surface of RCC to receive Polymer modified one component repair mortar or micro concrete. Laying of polymer modified one component repair mortar or micro concrete shall be completed within the overlay time of bonding coat. This bond coat act as bonding agent between old and new concrete. Item rate inclusive of all materials, labours, supervision, tools, tackles, transportaion, fixing etc complete all as directed. Make CICO latex SBR or equivalent in Fosroc/Dr Fixit/STP. Note :-The work shall be carried out upto 03 storey building or 12m height. through authorised applicator or agent of the main manufacturer. |
| 124 | M&L for preparation the surface and applying 20mm thick in two layer, each layer n.exc. 10mm thick with polymer modified mortar(PMM) on surface of slab/column/roof/chajjas/roof projection/balconies/staricase etc as dierected with polymer modified one component repair mortar of PMM CICO repocem or equivalent in Fosroc/Dr Fixit/STP. Inclusive of all materials, labours, supervision, tools, tackles, transportaion, fixing etc complete all as dierected.Note :-The work shall be carried out upto 03 storey building or 12m height. through authorised applicator or agent of the main manufacturer. |
| 125 | M&L for 20 mm thickcement plaster in cement mortar (1:3) mixed with and including liquid water proofing compound @ 100ml/50Kg of cement or as per manufacturer"s instructions of CICO-super or equivalent inFosroc/Dr Fixit/STP. Note:- The work shall be carried out upto 03 storey bulding or 12m height. through authorised applicator or agent. Note :-The work shall be carried out upto 03 storey building or 12m height. through authorised applicator or agent of the main manufacturer. |
| 126 | M&L for two layer with two component modified polymer coating. The glass fiber mesh 2mm x 2mm between 1st coat and 2nd coat shall be provided immediately after application of 1st coat of polymer modified coating separated by a gap of specified time as per manufacturer"s instrucitons complete all as specified and directed at site. |
| 127 | M&L for water proofing treatment to sunken roof with APP based polymeric membrane, 3mm thick (minimum), weighing 3.0 Kg/Sqm reinforced with polyester non woven fabric (weighing not less than 160 gms/qm) shall be applied over and inlcuding applying one coat of cold applied bituminous primer @ 0.25Kg/Sqm shall be applied on platered surfaces, thereafter a layer of APP modified membrane as specified above shall be laid by torch application method and all overlaps shall be minimum with 10cm side laps and 15cm end laps. |
| 128 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as spcified and directed. |
| 129 | Taking down unserviceable submain wiring with any size aluminium/copper cable from existing concealed conduit/surface conduit/PVC casing caping and making good the disturbed surfaces complete all as specified and directed |
| 130 | Taking down unserviceable main switch/DB/MCBs incl disconnection from mains and making good the disturbed surfaces complete all as specified and directed. |
| 131 | M&L for concealed point wiring for controlled by one switch with PVC insulated but unsheathed single core FRLSH multistranded copper conductor cable IS-694 markedof size 1.5 Sqmm (nominal area)(Phase and Neutral) in and including non metallic rigid PVC conduit 20 mm dia by cutting chases in walls by cutter and making good the surface in cement mortar (1:3) and to the original specification and PVC conduit on ceiling for steel structure/surface conduit with clamps, gutties etc for RCC ceilingfor one light point controlled by one, one way switch including one run of PVC insulated FRLSH copper conductor cable of size 1.5 Sqmm with green insulation as earth wire and connected to earth dolly complete, for one light/fan point controlledby one switch one way all as specified and directed. |
| 132 | All as per Item No 101 here-in-before but One ceiling/exhaust fan point controlled by one, one way switch |
| 133 | All as per Item No 101 here-in-before but One 5 Amp socket point controlled by one, one way switch |
| 134 | M&L for concealed point wiring for controlled by one switch with PVC insulated but unsheathed single core FRLSH multistranded copper conductor cable IS-694 markedof size 2.5 Sqmm (nominal area)(Phase and Neutral) in and including non metallic rigid PVC conduit 20 mm dia by cutting chases in walls by cutter and making good the surface in cement mortar (1:3) and to the original specification and PVC conduit on ceiling for steel structure/surface conduit with clamps, gutties etc for RCC ceilingfor one light point controlled by one, one way switch including one run of PVC insulated FRLSH copper conductor cable of size 2.5 Sqmm with green insulation as earth wire and connected to earth dolly complete, for one 3/5 pin 16 Amp socket outlet point controlledby one switch one way on independent boardall as specified and directed. |
| 135 | S&F switch 5 Amps piano flush type single pole one way complete all as specified and directed. |
| 136 | S&F switch socket combination flush type 5/15 Amps 3/3 pin universal multipurpose complete all as specified and directed. |
| 137 | S&F socket outlet flush type 2/3 pin 5 Amps complete al as specified and directed |
| 138 | S&F ceiling rose surface bakelite 65x50mm three terminal complete all as specified and directed. |
| 139 | S&F LED tube light fitting 1x20W, 230V, including LED (tube rod), 4 feet batten fitting fixtures, complete with all accessories internally pre-wired and including connectiong up with three core twisted flexible copper conductor cable with suitable size complete all as specified and directed |
| 140 | S&Fsub-main wiring with two run of single core (FRLSH) PVS insulated and unsheathed cable with copper condutor (multistranded) having nominal area 4.0 Sqmm drawn through conduit concealed type and making electric connections including one run (FRLSH) PVC insulated single core copper conductor cable 4.0 Sqmm as a earth continuity conductor drawn through PVC conduit, including cutting chases in brick wall whereever necessary, replastering and making good to match the existing specifications including taking down ofld submain wiring complete all as specified and directed. Note :- (i) Unit rates qouted by the contrator shall be deemed to be included for cuttingchases in brick/stone/concrete masonry wall/ceiling/floor for passing in or through conduit and making good tp match with existing surface. (ii) Two run of 4.0 Sqmm single core (FRLSH) PVC insulated copper conductor cable one run of 4.0 Sqmm copper conductor cable (FRLS) as a earth lead and one run od PVC conduit with fittings will be measured as a one unit. |
| 141 | S&F sheet metal enclosures single pole and neutral (SPN), 8 ways, 240 Volts with 200 Amps rated copper bus bar with double doorscomplete all as specified and directed |
| 142 | S&F MCBs single pole and neutral, 240 Volts 6 to 32 Amps, 10 KA"C" Curve series complete all as specified and directed |
| 143 | S&F exhaust fan 300mm sweep, AC single phase, 230/240 V , 1400 RPM, steel body, double ball bearings heavy duty motor with louvers etc with mounting accessories like fastener grounting to wall, including electrical connection upto ceiling rose, cutting through stone masonry wall for providing opening suitable for the exhaust fan, fininshing the disturbed surface making good with PCC (1:2:4) and cement mortar 1:4 etc complete all as specified and directed. |
| 144 | S&F 15mm bore brass chromium plated (fancy type) stop valve, crutch or butterfly handle, screwed down both ends for high pressure, as per ISI suitable for 15mm dia iron pipe complete all as specified and directed. |
| 145 | S&F in relacement 15 mm size PVC connection 450mm long with PTMT nuts/adaptorscomplete all as specified and directed. |
| 146 | Supply and Instal Solar water heating system, Flat plate collector type with heat exchanger of 500 liter per day capacity with electrical heating back up complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
