Tender For Work Of Purchasing New Led Lights Of 70 Watt And Other In Central Electric Store, Municipal Corporation Greater Jaipur, jaipur-Rajasthan

Work Of Purchasing New Led Lights Of 70 Watt And Other In Central Electric Store, Municipal Corporation Greater Jaipur , (E181300) Providingof Ik07 Ip 66 Protected Led Street Light Luminaire On Existing Bracket/Pole. Fixture Made Of Powder Coated Single Piece Pressure Die Cast Aluminum Lm6/ Adc12 Material With Heat Dissipation Fins On Housing With Uv Stabilized Pc/Toughened Glass Cover (Uv Stablzation Report Submitted For Uv Cover ) And Secondary Lens On Each Led & Should Be Smd Type . The System Level Luminaire Efficacy >=120 Lm/ Wt With High Power Leds Is To Be Used And Potted Driver Must Be Potted & Has A Unique Bis R Number With Input Voltage Ac 120 To 270 V Ac With High Voltage Cutoff @>=300 V Ac And Auto Resetting Safety ,Input Frequency 50Hz±3% Power Factor >0.95 Driver Efficiency >85% ,Thd(I) <10% Humidity 10% To 90% Rh Working Temp -5C To 45C . Driver Current <1000Ma Shown In Lm79 Report. The Luminaire Shall Be Bis Certified And T.C. Certified. Life Expectancy Equal Or More Than 50000 Burning Hrs With Minimum 70% Lumen Maintened ,Color Rendering Index >70 And Cct 5700K +355K. Surge Protection Shall Be Min = 4 Kv Internal And Min 10 Kv External. Driver Should Be Phase To Phase Protection Of 440 V For 4 Hrs. Manufactures Word Mark/Name Engraved/Embossing On Die Cast Housing To Allow Traceability/Authenticity. Fixture Shall Be As Per Is 10322 Complianced. Oem Must Have Its Own In House Nabl Lab Setup For All Testing Facilities For Led Fixtures. (Lm79/Lm80) Certificate/ Report With Liable Warranty Of Product/Accessories From Oem Shall Be Submitted. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure A Attached With This Bsr . , (E181301) Led Street Light Fixture 20 Watt , (E181302) Led Street Light Fixture 30 Watt , (E181305) Led Street Light Fixture 70 Watt , (E040100) Supplying Offr Pvc Insulated & Unsheathed Flexible Copper Conductor As Per Pwd Specification For Electrical Works With Isi Marked (Is:694) And As Per Is 8130 : 2013 Of 1.1 Kv Grade . Wire Should Be Made From 99.99% Purity Copper, Class 5 Stranding In Acc. To Iec 60228 For Lower Watt Loss , Oxygen Free ( <10 Ppm) For Less Chances Of Oxidization And Higher Silver Content For Gives Better Conductivity , Insulation Pvc Type A Or C ,Flame Retardant As Per Is 10810-53, Better Amperage Rating As Per Vde 0298 Part 4, , In Existing Surface Or Recessed Pvc/ Ms Conduit/Casing Capping Including All As Per Pre Approved By Engineer In Charge,Making Connections, Etc. As Required. Oem Must Have Its Own In House Nabl Lab Setup For All Testing Facilities For Wires. For Additional Technical Parameters Of Products/ Work , Refer Annexure A Attached With This Bsr . , (E040102) 2 X 1.5 Sq.Mm , Note : -Fixing Of Led Lights Will Be Done Ny Nagar Nigam , So The Labour Charges (Installation Charges) 10% Reduced From Bsr Rates.

INR 1000 /-

INR 161365.0 /-

INR 80.68 Lakhs /-

Name of Work:Supply of 70W LED & other Street lights in the Central Electricity Store Nagar Nigam Greater Jaipur

Sl. No.	Item Description
1	(E181300) Providingof IK07 IP 66 protected LED Street Light Luminaire on existing bracket/pole. Fixture made of powder coated single piece pressure die cast aluminum LM6/ ADC12 material with heat dissipation fins on housing with UV stabilized PC/Toughened Glass cover (UV stablzation report submitted for UV cover ) and secondary lens on each LED & should be SMD type . The System level Luminaire efficacy >=120 lm/ wt with High Power LEDs is to be used and potted driver must be potted & has a unique BIS R number with Input Voltage AC 120 to 270 V AC with High voltage Cutoff @>=300 V AC and Auto resetting Safety ,Input Frequency 50Hz±3% Power Factor >0.95 driver Efficiency >85% ,THD(I) <10% Humidity 10% to 90% RH Working Temp -5C to 45C . driver current <1000mA shown in LM79 report. The luminaire shall be BIS certified and T.C. certified. Life Expectancy Equal or more than 50000 burning hrs with Minimum 70% lumen maintened ,color Rendering Index >70 and CCT 5700K +355K. Surge protection shall be min = 4 KV internal and min 10 KV external. driver should be Phase to phase protection of 440 V for 4 Hrs. Manufactures Word Mark/Name Engraved/Embossing on die cast housing to allow traceability/authenticity. Fixture shall be AS PER IS 10322 Complianced. OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
2	(E181301) LED Street Light fixture 20 Watt
3	(E181302) LED Street Light fixture 30 Watt
4	(E181305) LED Street Light fixture 70 Watt
5	(E040100) Supplying ofFR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from 99.99% purity copper, class 5 stranding in acc. to IEC 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation PVC type A or C ,flame retardant as per IS 10810-53, better amperage rating as per VDE 0298 part 4, , in existing surface or recessed PVC/ MS conduit/casing capping including all as per pre approved by Engineer in charge,making connections, etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
6	(E040102) 2 x 1.5 sq.mm
7	Note : -Fixing of LED lights will be done ny Nagar Nigam , so the labour charges (Installation charges) 10% reduced from BSR Rates.