Increasing Capacity Of Transformers In Business Plan, In Area Of Edd-Garh- 1 Increasing Capacity Of 250 To 400Kva At Various Places As Per Sanctioned Estimate. ( All Work Will Be Completed As Per Sanctioned Estimate ) . 2 Carriage Of 3 Phase Distribution Box From Electricity Store Center, Hapur To Site Of Work With Loading And Unloading At Both Ends On Kachha Packka Road. 3 Opening Of The Jumper Of Lt & Ht Side At Double Pole. 4 Safely Removal Of Old 250Kva Transformer From Double Pole And Loading Of The Same, With The Help Of Crane. 5 Safe Loading Of New 400Kva Transformer At Je, Store / Ctr / Esc, Hapur, With The Help Of Crane. 6 Carriage Of New 400Kva Transformer From Je Store / Ctr / Esc, Hapur To Site Of Work. 7 Safe Unloading Of New 400Kva Transformer From Vehicle, With The Help Of Crane At Lt Sub-Station And Installing Of The Same On Double Pole / Plinth. 8 Connecting Of The Jumper Of Lt & Ht Side And Fixing All Required Accessories At Double Pole / Plinth. 9 Carriage Of Old 250Kva Transformer From Site Of Work To Je Store / Ctr / Esc, Hapur And Safley Unloading The Same. 10 Laying Of Abc Cable ( 3X120+1X95+1X16 ) Sqmm., And Completion Of Work Properly As Per Respo / Norms. 11 Installation Of 3-Phase Distribution Box, Including Fixing Of All Accessories By Providing All Required Materials ( Like Suitable Clamps, Nuts & Bolts Etc. ) As Per Respo / Drawing Norms. 12 Increasing Capacity Of 100 To 250Kva At Various Places As Per Sanctioned Estimate, ( All Work Will Be Completed As Per Sanctioned Estimate ) . 13 Carriage Of Line Material ( Like: Clamps, Channel, Conductor Etc. ) From Electricity Store Center, Hapur To Site Of Work With Loading And Unloading At Both Ends On Kachha Packka Road. 14 Carriage Of Pcc Pole 8.5 Mtrs. Long From Electricity Store Center, Hapur / J.E. Store To Site Of Work With Loading And Unloading At Both Ends On Kachha Packka Road. 15 Carriage Of Single Phase Distribution Box From Electricity Store Center, Hapur To Site Of Work With Loading And Unloading At Both Ends On Kachha Packka Road. 16 Erection & Fixing Of Pcc Pole 8.5 Mtr. In L.T. Line After Digging Of Suitable Pits Including Fixing Of All Accessories By Providing L.T. Pin Clamp Made Of M.S. Flat Of Size 50X6mm & Shackle Insulator Of Size90x75 Mm & Proper Size Nuts And Bolts As Per Respo Drawing / Norms. 17 Fabrication, Erection And Fixing Of Double Pole On Pcc Pole 8.5 Mtr. Long With Fixing Of M.S. Top & Dropper Channel, M.S. S / S Angle, E-Bracket, 11 Kv Pin Insulator With Pin, Disc Insulator With Disc Fitting As Per Respo Drawing / Norms By Providing Topand Dropper Clamps Made Of M.S. Flat Of Size 50X6 Mm With Proper Size Nuts And Bolts. 18 Opening Of The Jumper Of Lt & Ht Side At Double Pole. 19 Safely Removal Of Old 100Kva Transformer From Double Pole And Loading Of The Same, With The Help Of Manual Labour & Chain Tackle Etc. 20 Safe Loading Of New 250Kva Transformer At Je, Store / Ctr / Esc, Hapur, With The Help Of Crane. 21 Carriage Of New 250Kva Transformer From Je Store / Ctr / Esc, Hapur To Site Of Work. 22 Construction Of T / F Plinth Suitable For 250Kva T / F ( Size Of2 X 2 X 1.5 Mt. ) As Per Drawing, Cc Work In Foundation In Ratio 1:4:8 ( Cement, Sand & Brick Ballast ) . Ist Class Brick Work In Side Walls Cc Ratio Of 1:4 ( Cement & Fine Sand ) . 12Mm Thick Plaster In Ratio 1:4 ( Cement & Fine Sand ) . The Rcc Work On Top Of Plinth In Ratio 1:2:4 After Duly Filling Of Brick Ballast Inside The Plinth & Ramming The Same, Including Cost Of All Material & Labour. 23 Safe Unloading Of New 250Kva Transformer From Vehicle, With The Help Of Crane At Lt Sub-Station And Installing Of The Same On Double Pole / Plinth. 24 Connecting Of The Jumper Of Lt & Ht Side And Fixing All Required Accessories At Double Pole / Plinth. 25 Laying Of Abc Cable ( 3X120+1X95+1X16 ) + ( 395+1X70+1X16 ) Sqmm., And Completion Of Work Properly As Per Respo / Norms. 26 Laying Of Abc Aluminum Cable 1X240 Sqmm., And Completion Of Work Properly As Per Respo / Norms. 27 Laying, Stringing And Final Sagging Of Acsr Weasl Conductor After Binding From Insulator, As Per Respo / Drawing Norms. 28 Chemical Earthing Of Transformers Equipment The Ground Surface Where It Will Be Bolted To The M.S. Earth Strip For Connection The Earth Strip Will Be Welded To The Earthing And Neutral Support, As Per Respo / Norms. 29 Earthing Of Neutral & Body Of Transformers By Boring And Lowering Of G.I. Pipe Size 32 Mm Dia… Into The Ground Up To Water Level 120 Fit. With The Lower End Of Solid Copper Cone Approx. 225Mm Long And 750 Gm. In Weight Shall Be Provided And Screwed In Pipe As Well As Bringing Out A Continuous Copper Wire 6 Swg From The Cone Up To The Ground Surface Where It Will Be Bolted To The M.S. Earth Strip For T / F Neutral Connection, The Earth Strip Will Be Welded To The G.I. Pipe And Neutral Earthing Support As Per Respo Drawing / Norms. 30 Providing Fixing And Fabrication Of Fencing ( Ms 5Mp 5X6mm Fencing, 6 Feet Hight Including Civil Welt 2X4x3 ) Around The T / F Plinth Upto 6 Fit Height On Top Of T / F Plinth, Including Cost Of All Material And Labour As Per Drawing 31 Installation Of Single Phase Distribution Box, Including Fixing Of All Accessories By Providing All Required Materials ( Like Suitable Clamps, Nuts & Bolts Etc. ) As Per Respo / Drawing Norms. 32 Grouting & Fixing Of Stay Rods ( 20X1800 ) Mm Including All Work Of Excavation, Cement Concrete In Size ( 0.60X0.60X0.30 ) M In Ratio 1:4:8 Cement, Sand, 40Mm Brick Ballast As Per Drg. Including Back Filling, Proper Ramming Etc And Fixing Tightening & Nozzling Of Stay Wire With Stay Rod With The Poles Of Required Tension As Per Drawing As Per Respo Drawing / Norms By Providing All Grouting Material And Stay Clamp Made Of M.S. Flat Of Size 50X6mm With Proper Size Bolts & Nuts & Loops. 33 Providing And Fixing Of Brass Bolted Type Lugs Suitable For 1X240sqmm Cable And Completion Work Properly As Per Respo / Norms. 34 Carriage Of Old 100Kva Transformer From Site Of Work To Je Store / Ctr / Esc, Hapur And Safley Unloading The Same.
