}

Tender For Internal Electrification, Fire Fitting, Fire Alarm System In Proposed 50 Rooms Hostel For Krishi And Prodaugik University Banda Krishi Utpadan Mandi Samitee Banda Distt Banda, banda-Uttar Pradesh

Rajya Krishi Utpadan Mandi Parishad has published Tender For Internal Electrification, Fire Fitting, Fire Alarm System In Proposed 50 Rooms Hostel For Krishi And Prodaugik University Banda Krishi Utpadan Mandi Samitee Banda Distt Banda. Submission Date for this Tender is 05-04-2023. Alarm Systems Tenders in banda Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

37013371
Tender For Internal Electrification, Fire Fitting, Fire Alarm System In Proposed 50 Rooms Hostel For Krishi And Prodaugik University Banda Krishi Utpadan Mandi Samitee Banda Distt Banda
Open Tender
Indian
Uttar Pradesh
banda
05-04-2023

Tender Details

Internal Electrification, Fire Fitting, Fire Alarm System In Proposed 50 Rooms Hostel For Krishi And Prodaugik University Banda Krishi Utpadan Mandi Samitee Banda Distt Banda

Key Value

Document Fees
INR 8100 /-
EMD
INR 428000.0 /-
Tender Value
Refer document

BOQ Items

Name of Work:InternalElectrification, Fire Fitting, fire alarm system in Proposed 50 rooms Hostel for Krishiand prodaugik University Banda " Krishi Utpadan mandi samitee, Banda (Distt. Banda) U.P. ( Note :- Rate are without GST, GST will be Paid Extra 18% )
Sl. No. Item Description
1Wiring point for light with 1.5 sq.mm FRLSH PVC insulated multistrandsingle core Copper Conductor cable in PVC conduit pipe partly concealedin wall&partlylaidin slab along with the reinforcement before concreting,complete with 1.5 sq.mm. FRLSH PVC insulated multistrand copper conductor cable earth continuity wire, piano type switches & ceiling rose / angle / batten holder with modular type switch etc complete in all respects as directed, including matching color wash. (138C + 187A)
2Wiring point for two ways light with 1.5 sq.mm FRLSH PVC insulated multistrandsingle core Copper Conductor cable in PVC conduit pipe partly concealedin wall&partlylaidin slab along with the reinforcement before concreting,complete with 1.5 sq.mm. FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit continuity wire and two number two way piano type switches & ceiling rose / angle / batten holder with modular type switch etc complete in all respects as directed, including matching color wash.(139C + 187B)
3Wiring point for fan /fresh air fan (light duty exhaust fan) with 1.5 sq.mm FRLSH PVC insulated multistrandsingle core Copper Conductor cable in PVC conduit pipe partly concealedin wall&partlylaidin slab along with the reinforcement before concreting,complete with 1.5 sq.mm. FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit continuity wire, piano type switch & ceiling rose with modular type switchetc complete in all respects as directed, including matching color wash.(140C + 187A)
4Wiring point for plug with 1.5 sq.mm FRLSH PVC insulated multistrandsingle core Copper Conductor cable in PVC conduit pipe partly concealedin wall&partlylaidin slab along with the reinforcement before concreting,complete with 1.5 sq.mm. FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit continuity wire with modular type switch& socket etc., complete in all respects as directed, including matching color wash. (141C + 187C)
5Wiring points for Call bell with 1.5 sqmm.FRLSH PVC insulated multistrand single core copper condutor cable in PVC conduitpipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sq. mm. FR PVC insulated multistrand copper earth contunity wire and modular type bell push or 2pin socket etc.complete in all respects.as directed including matching colour wash. when modular type switches etc are used. in various wiring points.(142C + 187E)
6supplyfixingand concealing of25mm dia.2mm thick PVC conduit pipe with ISI mark embossed and with PVC acessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resin/ adhesive to make the complete piping rigid,plastering with cement sand mortar finished to level with matching colour including cost of material labour and T & P etc required for proper completion of the work as per directions and to the satisfaction of engineer in charge. ( T.V. /Telephone) (149A)
7Supply & wiring of sub mains with two number2.5 sq.mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in 20mm dia heavy duty (2mm thick)PVC conduit with 1 Number 1.5 sq.mm. FRLSH PVC insulated 1100 V grade multistrand copper conductor cable as earth continuity wire drawn inside the conduitcomplete in all respect. (1307 C)
8Supply & wiring of submains with two number4 sq.mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in 20mm dia heavy duty (2mm thick)PVC conduit with 1 Number 2.5 sq.mm. FRLSH PVC insulated 1100 V grade multistrand copper conductor cable as earth continuity wire drawn inside the conduitcomplete in all respect. 221 C
9Supply & wiring of submains with two number6 sq.mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in 20mm dia heavy duty (2mm thick)PVC conduit with 1 Number 4 sq.mm. FRLSH PVC insulated 1100 V grade multistrand copper conductor cable as earth continuity wire drawn inside the conduitcomplete in all respect. 222 C
10Supply and wiring of submain with 4 number 6 sqmm . FRLSH PVC insulated 1100 V grade multistranded single core copper conductor cable in32 mm dia heavy duty (2mm thick ) PVC conduitpartly concealed in wall and partly laid in slab along with reinforcement befor concreting with two number 4 sq. mm FRLSH PVC insulated multistrand copper earth contunity wire drawn inside the conduitcomplete in all respect.277 C
11Supply and wiring of submain with 4 number 10 sqmm . FRLSH PVC insulated 1100 V grade multistranded single core copper conductor cable in32 mm dia heavy duty (2mm thick ) PVC conduitpartly concealed in wall and partly laid in slab along with reinforcement befor concreting with two number 10 SWG copper earth contunity wire including colour wash etc. complete in all respects. 278 C
12Supply & fixing of single wall bracketon matching M.D.F.E.G.boardbase etc. complete in all required.412 A
13Supply & fixing of Recess/Surface/Pendent mounting round 6 to 8 Watt LED down lighter having powder coated die cast Aluminium housing with heat sink, diffuser/reflecter, and driver set complete in all respect. 1401 A
14Supply and Fixing of LED Tube Light with batten suitable for up to 1X22 watt LED tube light fitting complete including tube on surface complete in all respect.1 X 22 W CAT-AA 1413AA
15Supply and fixing of factory wired integral LED flood light fitting having diecast aluminium housing built with driver set suitable for 140 to 150 watt confirming to IP 66 protection complete in all respect.1454 A
16Supply & fixing of Call Bell Of Approved Make on matching polishedMDFEG boardbrassincludingconnectionetc. as required. 1101
17Supply & fixing ofbuzzer on polished MDFEG/Teak ply board including making connections etc. complete in all respect. 1103
18Supplyand burying safe earthing Electorde T-19 (HotDip Galvanized), Length 2000 mm, outer pipe 50mm, inner pipe 25,terminal Dia 12mm ,outer G.I.pipe of 16 swg and inner GI pipe of 12swg withHotDipGavanized up to 100 mirconfilled with crystalline conducative mixture (CCM) having anti corrosive & conducative property with 50 kgs activated soil (BFC) capable ofreducing the soilresistivitywith good mixture ofretaning capacity along with 30 cm squre C.I. frame with hinged cover & masonryhousing (from electode terminaltoswitchboard , cost of 25 x 3 G.I. strip will be extra) Make:As approved in U.P.P.W.D. & C.P.R.I. Certified725
19metres long G.I. pipe, vertically for earthing having 12mm dia. holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No.6 to 8SWG G.I.wire in G.I. pipe upto appron (and from apron to switch board the cost of G.I. pipe and G.I. wire will be extra) upto switch board, 30cm. square C.I.box with hinged cover, masonary housing, alternate layers/of charcoal/ coke and salt at least 150mm thick alround etc. complete in all respects. 701
20Supplying & Laying of 25mmx3mm G.I. Strip from earth electrode in ground as required complete in all respects. 716
21Supply & fixing of two number 8 SWG G.I. wire for earthing purpose as required complete in all respects. 723
22S & F of 6 Amp to 32 Amp SP MCB(10KA) . CAT A1002 A
23S & F of 6 Amp to 32 Amp SP MCB(10KA) . CAT A1009 A
24Supply and fixing of 40 Amp. 4 Pole MCB (10KA) 1020
25Supply and fixing of 63 Amp. 4 Pole MCB (10KA)1020 A
26Supply and fixing of surface/ flush mounting 4 way TPN distribution board with additional metal doorwithout MCB complete in all respect, as directed at site by Engineer Incharge. 1026 A
27S/F of 8 way SPNDB without MCB1024 A
28Supply and fixing of surface/ flush mounting 6 way TPN distribution board with additional metal doorwithout MCB complete in all respect, as directed at site by Engineer Incharge. 1027 A
29Supply & fixing of Crimping, solder, less, copper ton electroplated lugs of Dowel/ismail make suitable for 1.5 sqmm to 6sqmm cables, including tapping with insulating tape,etc. complete in allrespects.1129
30Supply and fixing of single pole MCB blanking plate 1034B
31S/F of power plug with 20Amp/250 volt flues type modular switch and 5 pin 20amp and 250 volt flush type universal modular socket switch on concealed M.S. Box including supply of all material, labour T&P etc. required for proper completion of work. (1139 A)
32Erection and testing of ceiling fan and regulator for room height upto 3.5mts. including supply of 3mm thick G.I. down rod 19mm dia duly painted, complete in all respects.1116
33Erection and testing exhaust fan on the exhisting hole with suitable size of rag bolts nuts and washers etc. complete in all respects.1120
34Supply & fixing of 16 gauge M.S.drum duly painted including making hole in the wall for exhaust fan and finishing properlyetc. complete as required. 1122
35Fan box of approved make made up of 1.0 mm thick ISI marked G.P. Sheet spot welded four to Eight holes of 25.4mm for pipe entry of the box. Holes should be semi-shuttered type with 0.5mm G.P. Sheet made upper & lower cover duly screwed fitted with 300mm round zink coated M.S. Bar x 12mm & brand name should be embossed. Fixing with wiring conduit laid in the R.C.C. roof before concreting alongwith supply of all material labour, T & P etc required for proper completion of the work. 1149
36Supplyfixingofelectronic fan regulator (Modular) 120-280 V. ISImarked, on the existing switch board including making connetion, required material, labour T/P etc for proper completion of work to the satisfaction of Engineer in charge of work. 1203 C
37Supply and laying aluminum conductor PVC insulated armored served sheathed cable 1100 volts grade at a depth of 750mm below ground level over a cushion of 75mm thick stand around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M,S. Clamps etc. of suitable size or as directed by the Engineer- In charge, complete in all respected, The armoring of the cable shall be properly connected with the earth conductor by clamps etc. (a) 185sq mm, 3.5 core501Q
38(B) 6sq mm, 2 core501A
39(C) 16sq mm, 4 core501I
40Supply & fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respects. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge 6sqmm 2 core503A
41185sqmm 3.5 core 503Q
42Supplying and fixing of Palm / pin type copper tin plated cables sockets (lugs) to the cable leads, insuslating with tape and making of connections etc. complete in all respects as per direction of Engineer-Incharge. 185sqmm 504L
43120sqmm 504 J
446sqmm 504 B
45Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN MCCB’s (Four Pole 36 KA with thermal magnatic release) Switches complete and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters (KVA, P.F, KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic aluminium busbars as per IS8623 or above istulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The MCCB’s shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc. The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6 mm/2 mm. Cubicle type switch board shall be of cat A & B only. The minimum clearances between bus bars shall be as follows :Phase to phase - minimum 20mmPhase to neutral-minimum 15mmCUBICAL PANEL BOARD ( MCCB TYPE )L.T.PANELIncoming : one (1)No.630Amp. MCCB-1No.Metering :One (1) No. (0-500V) 96 x 96 Sqmm voltmeter with control fuse & selector switch.One (1) No. (0-630A) 96 x 96 Sqmm CT operated Ammeter with selector switch, CTs etc.One (1) Set of Phase Indication Lamp.Bus Bar :One (1) No.630 A, TPN aluminimum bus bar of suitable length.Outgoing :Phase indication lamps on each outgoing to be provided.200 Amp. MCCB- 2 No. 100 Amp. MCCB- 1 No. 63 Amp. MCCB- 2 No. OR outgoing as per site requirment(AS/SLD)813
46Supply and fixing of danger board fabricated from 10 gauge M.S. sheet as per I.E.rules.1109
47Supply and laying of 1800mm x 900mm x 12mm thick chequered rubber matting of tested quality. 1136
48Supply and fixing 630 AMPfour pole Moulded case type on load change over switch with enclosure(also suitable for panel mounting with extra cost of bus bar) including the cost of labour, T & P , painting and other material required for proper completion of the work as per direction and satisfaction of Engineer in charge.- 343 A
49PART (B): SCHEDULE ITEMS (AS PER DSR. E&M 2018)Supplying and drawing following pair 0.5 sqmm FR PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface/recessed steel/PVC conduit as required.2 PairDSR 1.18.2
50Supplying and drawing co-axial TV cable RG-6 graded, 0.7 mm solid copper conductor PE insulated,shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.DSR 1.19
51Supplying and fixing following modular switch/ socket on theexisting modular plate & switch box including connections but excluding modular plate etc as required.Telephone socket outletDSR 1.24.6
52Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front75mm X 75 mm X 60mm Deep .DSR 1.22.1
53Supplying and fixingfollowing size/modules, GI box along with modular base& cover plate for modular switches in recess etc as required.1 or 2 Module (75mm X 75 mm) DSR 1.27.1
54Extra for fixing the louvers / shutters complete with frame fro exhaust fans of all sizes.DSR 1.51
55Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.DSR 1.26
56S/F ofB class GI pipe 100mm dia lade in soil/wall including labure and other matrial riqure for proper complete in all respect DSR 18.14.13.3
57Supply & erection of ceilling fan with standard down rod, blades including connection etc. complete as required-Make: Usha Cat No.SONATA MAX 1501
58Supply & erection of AC 230/250 Volts, 50 Hz Fresh Air fans including providing nuts, bolts, mounting frame and other accessories including connections etc. complete as required-Make: USHA Cat No. TURBO JET DLX300mm sweep.APPROVED
59Supply and fixing of LED street light fitting having diecast aluminium body and diffuser/reflector with driver set suitable for 75 watt to 90 Watt confirming to IP 65 protection complete in all respect.CAT AAA 1423
60Supply & wiring of submains with two number2.5 sq.mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in 20mm dia heavy duty (2mm thick)PVC conduit with 1 Number 1.5 sq.mm. FRLSH PVC insulated 1100 V grade multistrand copper conductor cable as earth continuity wire drawn inside the conduitcomplete in all respect. 1301 C
61Supplyfixingand concealing of32mm dia.2mm thick PVC conduit pipe with ISI mark embossed and with PVC acessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resin/ adhesive to make the complete piping rigid,plastering with cement sand mortar finished to level with matching colour including cost of material labour and T & P etc required for proper completion of the work as per directions and to the satisfaction of engineer in charge. ( For Incoming Cable ) 150 A
62S/F of 2meters high cage fabricated with 3mm thick expanded metal fixed on 50mmX50mmX6mm angle iron frame having vertical members spaced at 1 to 1.25mtrs and horizaontal members spaced at Mt. The vertical members should be grouted in the floor and horizontal members in the wall to a depth of 300mm with ends forked. The cage shall have 2000mmX1000mm size one leaf door with locking device having door frame fabricated with 35mmX35mmX6mm angle iron and 3mm expanded metal duly fixed with the cage members with hinged etc. The cage shall be painted with red oxide primer and synthetic enamel paint. The job includes all materials, labour, T&P etc for proper completion of work. 1142
63Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump) (a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520 b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-"F" insulation, conforming to IS-325. (c) M.S.fabricated common base plate, coupling, coupling (d) Suitable cement concrete foundation duly plastered and with anti vibration pads. Suitable for 2850 LPM and head 88 mtr.DSR 2019 4.62
64Providing, laying, testing & commissioning of 100mm dia "B" class heavy duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of requiredDSR 2019 8.7
65Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank cap and chain as required :DSR 2019 9.1
66Supplying, fixing, testing and commissioning of 100mm dia butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as requiredDSR 2019 11.5
67Providing, installation, testing and commissioning of 100mm dianon-return valve of following sizes confirming to IS:5312 complete with rubber gasket, GI bolts, nuts,washers etc.as required :DSR 2019 14.5
68Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange& landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required.DSR 2019 13
69Supply, Installation, testing and commissioning of gun metal Fire Hose, RRL Hose jacketed, 63mm dia x 15Mtr. long x 2 Nos. with heavy duty, 63mm 2 pair of male and female instantaneous couplings, having IS: 636 (Type A) S.S. wire wounded. DSR 2019 16.1
70Supply, Installation, Testing & Commissioning of Hose Reel Drum With 30Mtr. 19mm dia Reel Jet Shut off Nozzle DSR 2019 17.1
71Supply, Installation, testing and commissioning of gun metalBranch Pipe, short type, with 63mm. male instantaneous inlet, male threaded outlet, fitted with 20mm bore nozzle, having IS:903 mark. DSR 2019 18.1
72Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required.DSR 2019 22
73Supplying and fixing air vessel made of 250 mm dia, 8mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required. DSR 2019 20
74Supply, Installation, Testing & Commissioning of Manual Call Point. DSR 2018 17.1.3
75Supply, Installation, Testing & Commissioning of Hooter.DSR 2018 17.1.06
76Supplying, installation, testing & commissioning talk back slave station in surface/recess suitable for operation on simplex mode complete with P.T.T. knob & speaker/microphone enclosed in a M.S.(16 SWG)/ ABS box with break glass in front etc. complete as required DSR 2018 17.1.18
77Supplying, installation, testing & commissioning of main control and indicating panel made out of 16 SWG MS sheet to accommodate the following items duly powder coated in approved colour with louvers for ventilation, locking arrangement, audio and visual indication for fire alarm and public address system, monitoring system including connections, interconnections etc complete as required.6 zone panel for fire alarm system 100 watt amplifier racks suitable for operation on 230V AC/24V DC supply conforming to IEC-268-3 complete with all Talk back master station with LED PTT (press to talk) push button for operation on 230V AC/24 V DC supply conforming to IEC-268 for implex mode of operation/communication suitable for 20 Nos.talk back unit -1 set. Annoucement control desk suitable for selection of different zones selectively and ON ALL CALL switch with visual indication etc., complete as required- 1 set. Amplifier change over switch for inter changing amplifier- 1 No. Monitor panel for loudspeaker complete output selector ON/OFF switch, fuse visual indications etc. complete as required- 1 No. Gooseneck microphone with stand and ON/OFF switch -1 No. Mains ON/OFF switch, fuse indication lamps, DC and AC voltmeters & ammeters terminal blocks etc. complete as required -1 set.Battery charger trickle cum boost to take complete load of DSR 2018 17.1.11
78Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inletcouplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : 2Way 100mm diaDSR 2019 19.1
79Supply, Installation, Testing & Commissioning of Fire Extinguisher ABC Type 6Kg.PWD 2018 1131 A
80Supply and fixing of C02 type fire extinguisher 4.5 kg. capacity (ISI Marked IS : 2878 & TAC approved) complete with initial charge and wall bracket.PWD 2018 1132 A
81Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring& FRLS outer sheath complete as required.UPPWD 1312 C
82Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and accessories like coupler etc. as required UPPWD 148 A
83S/F of 25AMP TPN of automatic street light cubical control panel painted with anti corrosive slkali and acid proof paint consisting of time swith TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CT"s etc., complete in all respects.control panel UPPWD 807 E II
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail