Military Engineer Services-MES has published Tender For Repair Maint Of Ext Water Supply Systems, Stand By Dg Set, Lightning Protection System, Earthing To Magazines, Labs And Other Explosive And Fire Fighting Systems In Tbrl Ramgarh. Submission Date for this Tender is 27-04-2023. Explosives Tenders in ramgarh Haryana. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 15-Apr-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 22-04-2023 |
| 2 | 22-Apr-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 27-04-2023 |
| Sl. No. | Item Description |
| 1 | Disconnecting the 3 phase electric motor from the centrifugal pump set, taking down from the foundation , dismantling the motor, cutting out old burnt out windings, cleaning the slots of the stator and rewinding 16 HP to 50 HP 3 phase electric motor with super enameled copper conductor of suitable gauge including all insulating materials , sleeves , cotton tapes etc and incl varnishing ,drying etc and refitting the motor at original position , making all electrical connections. Dismantalling the pump, check the alignment, impelers and bearing etc. Overhauling the pump by greasing, oiling complete. Testing for proper working complete all as specified and directed. Note:- Copper winding wire and bearing of suitable size eyc. shall be measured and paid separately under respctive Items. |
| 2 | Supply only super enamelled copper winding wire complete all as specified and directed |
| 3 | Supply only PVC insulated water proof copper conductor winding wire complete all as specified and directed |
| 4 | Supply and replacing of ball bearing No 6206/6208/6306/6307 complete all as specified and directed. |
| 5 | Supply and replacing of ball bearing No 6308/6309/6310 complete all as specified and directed. |
| 6 | Supply and fixing inrepairs of MCCB 63 Amp rating, 4 pole, 415 volts, breaking capacity 16 KA complete all as specified and directed |
| 7 | Supply and fixing inrepairs of MCCB 100 Amp rating, 3 pole, 415 volts, breaking capacity 25 KA complete all as specified and directed |
| 8 | Supply and fixing forcast iron sluice valve flanged and drilled with stainless steel spindle, iron wheel ISI marked with nuts, bolts & washers and gasket heavy duty PN 1.6 of following sizes tested with high pressure conforming to IS - 14846,of 150 mm dia. |
| 9 | All as per serial item no 8.00 above but size 100mm dia. |
| 10 | All as per serial item no 8.00 above but size80mm dia. |
| 11 | Material and labour for replacement of unserviceable submersible cable 3 core 1100 Voltflat stranded copper conductor of size 16 Sqmm, complete all as specified and directed. |
| 12 | Material and labour for preperation of old painted surfaces of any discription, one coat of priming with red oxide , one coat of synthic enamel painton steel / iron surfaces complete all as specified and directed for GI / CIpipesand valve pit sheet covers. |
| 13 | Material and labourin repairs for preparation of old painted surfaces of any discription, one coat of priming with red oxide zinc chrome lead & two coat of sythic enamel paint Post office Red colour on steel/iron surface complete all as specified and directed. |
| 14 | Material and labourin repairs for preperation of old painted surfaces of Description Boards for motor pumpsets/DG sets/borewells including one coat of priming with red oxide zinc chrome lead & two coat of blue enamel paint and writing with white enamel paint , of any size complete all as specified and directed |
| 15 | Material and labour for painting to the fire hydrant cabinet of over all dimensions 0.60 x 0.45 x 1.0 Mtr on all the surfaces with two coats of post office red enemmeled paint over a coat of red oxide primer after prepairing the surface properly for repainting by scratching all rust and dirt complete all as specified and directed |
| 16 | Material and labour for replacement of cast iron Non returnvalve and sluice valve with flanged ends and jointing materials such as nuts, bolts, washersheavy duty PN-1.6of size 80 mm bore complete all as specified and directed. |
| 17 | All as per serial item no 14.00 above but Bore of pipe 150mm. |
| 18 | Material and labour for replacement of cast iron Butterflyvalve with flanged ends and jointing materials such as nuts, bolts, washersheavy duty PN-1.6of size 80 mm bore complete all as specified and directed. |
| 19 | All as per serial item no 15.00 above butBore of pipe 50mm. |
| 20 | All as per serial item no 15.00 above but Bore of pipe 150mm. |
| 21 | Material and labour in repairsfor framed worksuch as grills, grattings, etc with ends of bars shouldered and /or rivited, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railing frame work of water tanks and similar work conforming to Fe 290 Gde-E-165 complete all as specified and directed. |
| 22 | Supply and replacing MS bend 80 mm dia 45 cm long dully bended and welded to required shape complete with flanged ends incl jointing materials such as nuts,bolts,washers and gaskets etc complete all as specified and directed. |
| 23 | Excavation in trenches n exc 1.5 m wide and n exc 1.5 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in soft and loose soil complete all as specified and directed. |
| 24 | Returning, filling in including spreading, levelling,watering and well ramming in layers n exc 25 cm each layer, in soft and loose soil complete all as specified and directed. |
| 25 | Removing excavated spoil to a distance n exc 50 m and deposited where directed at a level n exc 1.5 m above the starting point complete all as specified and directed. |
| 26 | Supply and replacing rotational moulded polythelene water storage tank 500 ltr capacity double layered cyliderical vertical with closed top ISI marked hoisted and fixed in position as specified in SSR part-I complete including tank nipples of 20/25 mm dia for making inlet and outlet connections complete all as specified and directed. |
| 27 | All as per serial item no 21.00 above but capacity 1000 ltr. |
| 28 | Supplying, installing, testing, commissioning cosmic star-Delux automatic Star Delta Submersible pump Starter, suitabel for relay range 6 to 10 Amp (For 7.5 HP centrifugalpump set) with sutable type MNX/ML contactor and back up HRC fuse/ MCB and its controlwiringcomplete all as specified anddirected, |
| 29 | Supplying, installing, testing, commissioning cosmic star-Delux automatic Star Delta centrifgal/submersiblepump Starter, suitabel for relay range 36 to 52 Amp (For 50 HPpump set) ,with sutable type MNX/ML contactor and back up HRC fuse/ MCB and its controlwiringcomplete all as specified anddirected, |
| 30 | Supplying, installing, testing, commissioningDOL centrifugalpump Starter, suitabel for relay range 6 to 14 Amp (up to 7.5 HPpump set) ,with control panel voltmeter/ammeter sutable type MNX/ML contactor and back up HRC fuse/ MCB and its controlwiringcomplete all as specified anddirected, |
| 31 | Material and labour forin repairs hose box made out of 18 gauge MS sheet 800mm x 600mm x 250mm with doubble door with 4mm thick glass and door frame made of 16 gauge MS sheet painted fire red out side and brilliant white inside yard complete all as specified and directed. |
| 32 | Supply and replacing Hydrant valve 63 mm single headed complete all as specified and directed. |
| 33 | Supply and fixingin repairs canvas hose pipe 63mm dia 15mtr long hose confirming to IS-636 with male and female coupling confirming to IS-903 complete all as specified and directed. |
| 34 | Supply and replacing Fire brigade inlet connection 4 way complete all as specified and directed. |
| 35 | Supply and replacing Branch pipe gun metal 63mm instantaneous inlet, made threaded outlet, 15mm bore nozzle short complete all as specified and directed. |
| 36 | Supply and fixing in repairs hose real drum with 30 mtr pipe and nozzel complete all as specified and directed. |
| 37 | Supply and fixing in repair fire shut offnozzel complete all as specified anddirected. |
| 38 | Supply and fixing in repair ball valve 25 complete all as specified and directed. |
| 39 | Supply and fixing in repair Pressure gauge 4"dial 0-14 kgs ratingcomplete all as specified anddirected. |
| 40 | Supply & fixing single phase preventor suitable for 3- phase 415 volt electric motor having following safety parameter:- Single Phasing Phase reverse protection Over & under voltage protection. |
| 41 | Dismantling of the sluice valve repacking stuffing boxby cuttingnuts and bolts for repairs , replacement of steel spindle, check nuts including machining work,replacement of nuts , bolts and washers etc. of size.Bore of pipe 80mm. |
| 42 | All as per serial item no 35.00 above but size Bore of pipe 100mm. |
| 43 | All as per serial item no 35.00 above but size Bore of pipe 150mm. |
| 44 | Taking down old one and Supply and fixing new portable fire fithting extinguisher cylinder with dry powder mono ammonium phosphate 4 Mtr for 5 Kg jet length ISI Marked with hydraulic test pressure of 30 Kg f/Cm square with ABC test complete all as specified anddirected, |
| 45 | Supply and fixingin repairs of Non skid type rubber mat of size 1x2 Mtr and 2.5 mm thick as per IS : 15652 - 2006. |
| 46 | Supply and laying in repairs of LT UG cable XLPE insulated armouredheavy duty elect cable with stranded aluminiumconductor 1100 volts grade cross section area70 Sqmm 3.5 core laid in trenches/ fixing on panels/walls/poles or passing through pipe including connecting with suitable lugs, glands, nuts and bolts and testing complete all as specified and directed.(Note: (i) any Cable joint required for jointing of cables, shall be deemed to included in quoted rates.) |
| 47 | Supply, installation, commissioning and testing of factory made (CPRI approved) LT Panel outdoor type of suitable size, made ot of 3.15 mm thick CRCA sheet duly compartmentalized inside panel with 2 mm thick CRCA sheet for fixing of MCCB & instumentations compartments and frame etc. to accommodate the incoming and outgoing MCCBs/ COsduly powder coated (The inner/outdoor shell. will have powder coated siemens grey) and having provision for front and rear side opening with rubber beading and mild steel cable glands for each cable to make it weather and vermin proof.single door hinged type,both side openable, air fins for ventilation, The panel shall be placed on angle iron of size 50 x 50 x 6 mm frame supported on 04 legs 600 mm long each duly grouted in plaincement concrete blocks in 1:2:4 type B1 angle frame shall be provided with mild steel sheet 300 mm width and 1.6 mm thick on three sides duly fixed with nuts and bolts complete all as specified and directed. Panel shall comprise of the following:- (a) Aluminium bus bar mounted on insulators duly paintedcolour code 200 Amps - 3 Nos for phase and 100 Amps - 01 No for neutral. b) Fully automatic star -Delta starter 415 Volt,50Hz, 3 Phase suitable for 15 HP relay 10-16 Amotors with set of suitable Capacity contactor, mcb/back up HRC fuses, Relay and fuse holders etc 01 sets (c) Incoming MCCB 4 pole 3 phase,100 Amps,415 Volts AC rupturing capacity 25 KA -01 No. (d) Out going MCCB"s TP 63 Amps repturing capacity 16 KA for starters - 01 No"s (e) Out going MCB"s DP 32 Amps repturing capacity 10 KA =01 Nos(g) On load Change over switch 100 A, 4 Pole , 415 Volt (g) Multifunction MeterDigital type showing V,A,F,Pf Kw,KWHin built Selector switchwith CT coiles for three phase. Cat No WDM303FDWA1 of L&T Make:- L&T. (h) Indicator lamp neon type (RYB) with holder,one set for each incoming and out going - 03 Sets (i) Complete internal wiring with suitable sizes copper conductor PVC insulated all as per manufacturor design |
| 48 | Supply and fixing mild steel sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting platescomplete all as specified and directed. |
| 49 | Supply and fixing in repairsof Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 50 | Material and labour for excavation in post holes soft/loose soils ( for similar holes eachnotexc 0.5 cum getting out returning , fillling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm. complete all as specified and directed. |
| 51 | Material and labour for PCC 1:3:6 type C2 (40mm graded aggregate ) as in foundation filling and mass concrete for encasing of fencing posts. |
| 52 | Material and labour for sand cushioning to under ground cables 8 cm thick before laying the cable and 15 cm, thick after laying, stretchingand testing the cable complete all as specified and directed |
| 53 | Supply and layingGalvanized steel tubing light grade with complete all fittings such as elbbow, unions, nipples, tees, bends, short pieces, connectors, back nuts, caps, plugs, diminishing pieces and sockets etc all as per siterequirement of size 80 mm diacomplete all as per specified and directed. |
| 54 | Material and labour for laying in trenches burnt brick sub class "B" for cable protection laid adjacent to each other length wise perpendicular to the central axis of cable complete all as specified and directed. |
| 55 | Supply and fixing in repair outdoor LED Flood Light Luminaire JETA NEO 100 W Energy saving, Enviormental friendly, long life, exclusive innovative die-castaluminium IP 66 flood light, suitable for highilighting architectural facade and general purpose lighting 100W 6000Kcomplete all as specified and directed. |
| 56 | Material and labourin repairs for service cable 6 Sqmm 2 core 1100 volts grade heavy duty cable PVC insulated stranded alumn conductor, served with an inner sheathing of PVC tape and overall PVC sheathed in service connections/perimeter light supply as per site requirement, flat or circular all as required or directed. |
| 57 | Disconnecting the 3 phase electric motor from the centrifugal pump set, taking down from the foundation , dismantling the motor, cutting out old burnt out windings, cleaning the slots of the stator and rewinding 7.5 HP to 15 HP 3 phase electric motor with super enameled copper conductor of suitable gauge including all insulating materials , sleeves , cotton tapes etc and incl varnishing ,drying etc and refitting the motor at original position , making all electrical connections. Dismantalling the pump, check the alignment, impelers and bearing etc. Overhauling the pump by greasing, oiling complete. Testing for proper working complete all as specified and as directed. Note:- Copper winding wire and bearing of suitable size etc.shall be measured and paid separately under respctive Items. |
| 58 | Disconnecting the electric supply and outlet connections and taking out and lowering the submersible pump set of any capacity and size alongwith 80/100 mm dia column pipes and submersible cable etc from the tubewell using proper T&Pand keeping aside complete all as specified and directed. |
| 59 | Material and labour for repair to Submersible pump set motor of capacity 7.5 to 40 HP by dismantling of submersible motor 3 phase, 440 Volts cutting and removing the burnt winding wire, cleaning of slots and rewinding with super quality PVC insulated water proof copper conductor winding wire and machining as per original dia complete and replacement of thrust plate, thrust bearing, rotor straightenting, sealing kit, balancing of rotor.and reassembling complete all as specified and as directed (Thrust plate, thrust bearing, rotor straightenting, sealing kit, balancing of rotor and reassembling shall be unit rate deemed to include cost of the same by the contractor). Note:- PVC insulated water proof copper conductor Winding shall be measured and paid separately |
| 60 | Supply and instalation in replacement monoblock type water pumping set and discharge size 25mm and discharge pressure of 2600/600 LPH at 6/30 Mtr head self priming type 0.5HP capacity single phase 220volts complete all as specified and directed. |
| 61 | Material and labour for cleaning of RCC under ground water sump of capacity 35000 Glns in technical area by removal of sludge, scrapping silt mud and foreign material etc with wire brushes on the walls and floor of tank and washing and flushing the surfaces with bleaching powder and taking out the same manually from the compartments and removing the same to a distance not exc 50m and depositing where directed by Engineer -In - Charge and applying two coats of white wash (Internally ) to the tank, writing date of cleaning with white paint on black patch 45cm X45cm on external surface of tank in technical area complete all as specified and as directed. Note:- The cleaning of RCC under ground water tank will be carried out in everysix months. |
| 62 | Material and labour for Stripping out of submersible pump set 7.5 to 15 HP capacity and repairing the same by supply and replacing the following spare partscomplete all as specified anddirected :- Sleeve Coupling. |
| 63 | GM bush. |
| 64 | Non return valve. |
| 65 | Impeller key. |
| 66 | CI stage bowl. |
| 67 | Bearing Sleave. |
| 68 | Impeller. |
| 69 | Shaft. |
| 70 | SS coupling. |
| 71 | GM neck ring. |
| 72 | Suction strainer. |
| 73 | Suction casing. |
| 74 | Supply and fixing for swing typesingle disk cast ironfoot valve (IS:4038) with screwed ends size 50 mm bore,for iron pipe complete all as specified and directed. |
| 75 | Material and labour for replacement of cast iron Air rlease valve with flanged end and jointing materialssuch as nuts,bolts,washers etc of following sizes 40 mm dia. complete all as specified and directed. |
| 76 | Supply and fixing in repairsHeavy pvc ball valve with hendlescrewed both ends for iron pipe ofsize 32mm dia, complete all as specified and directed. |
| 77 | Supply and fixingin repairsHeavy pvc ball valve with hendlescrewed both ends for iron pipe ofsize 40mm dia, complete all as specified and directed. |
| 78 | Supply and fixingin repairsHeavy pvc ball valve with hendlescrewed both ends for iron pipe ofsize 50mm dia, complete all as specified and directed. |
| 79 | Supply and fixingin repairs gun metal gate valve with iron wheel head screwed both ends for cpvc pipe ofsize 15mm dia, complete all as specified and directed. |
| 80 | All as per serial item no 71.00 above but size 20 mm dia, |
| 81 | All as per serial item no 71.00 above but size 25 mm dia, |
| 82 | All as per serial item no 71.00 above but size 40 mm dia, |
| 83 | All as per serial item no 71.00 above but size 50 mm dia, |
| 84 | Supply and layingin repairs of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors Bore of pipe 32mmcomplete all asspecified and directed |
| 85 | All as per serial item no 72.00 above but size Bore of pipe 40mm. |
| 86 | All as per serial item no 72.00 above but size Bore of pipe 50mm. |
| 87 | Supply and fixing in repairsgalvanisedtube medium grade, with all fitting and fixed complete to walls and ceilings or laid in treanches/floors of size,Bore of pipe 50mm. |
| 88 | Material and labour for Machine pressed precasted concrete paver block 60mm thick M40 grade concrete with grey cement and pigment over sand cushioning complete all as per specified and directed |
| 89 | Material and labour for 100 mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggrigate) as in sub base concrete incomplete all as per specified and directed |
| 90 | Material and labour for PCC 1:4:8 type B1 (using 20mm graded stone aggrigate) as in copping concrete incomplete all as per specified and directed |
| 91 | Material and labour for Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting outcomplete all as specified and directed |
| 92 | Dismantling and taking downdislocated / de-shaped/loose earth contunity conductor or strip of or roof conductor in any position , any size complete including removal from work site or refixed at site complete all as specified anddirected |
| 93 | Supply and fixing for newaluminum strip 25 x 3.15 mm size as in roof / down conductor fixed with the help of porcelain insulator saddles and screws on roof/ wall complete all as specified and as directed.Note :- 1.The distance between porcelain insulator will not be more than 60 cm. 2.The quoted rates shall be deemed to includecost ofporcelain insulators ,T&P and labour required to work on roof top at lateral faces of Bldgs. |
| 94 | Refixing aluminium / GI / Copper strip of any size retreived from item No. 01 above using newporcelain insulators , fixing screws, nuts / bolts / washers of the joints of the strip complete including cleaning / scratching the dust complete all as specified and as directed by Engineer-in-Charge. Note :- 1.The distance between porcelain insulator will not be more than 60 cm. 2.The quoted rates shall be deemed to includecost ofporcelain insulators ,T&P and labour required to work on roof top at lateral faces of existing Bldgs. |
| 95 | Material and labour for air-termination,vertical type,single pointed rod made of 12 mm dia 300 mm long aluminium rod including necessary fixing arrangement with bolt, nuts and washers etc complete all as specified and directed |
| 96 | Material and labour for air-termination, vertical type, single pointed rod made of 12mm dia 300mm long copper rod including necessary fixing arrangement with bolt, nuts and washers etc complete all as specified and directed |
| 97 | Material and labour for GI tubing 20 mm bore light grade ISI marked 1.5 metre long fixed vertically on roof top, duly embedded in plain cement concrete 1:2:4 type B-1 block of size 30cm x 30cm x 30 cm complete all as specified and as directed |
| 98 | Material and labour for GI tubing 40 mm bore light grade ISI marked 1.5 metrelong fixed vertically on roof top duly embedded in plain cement concrete1:2:4 type B-1 block of size 30cm x 30cm x 30 cm complete all as specified and as directed |
| 99 | Supply and fixing for GI pipe light grade of size 40 mm diawith all fittings laid in trenches/ floors (or) fixed to wallsfor protection of Copper/GI/Aluminium strips complete all as specified and directed |
| 100 | Supply and fixing for Copper strip of size 20 x 3.15 mm burried in ground/fixed on wall complete with porcelain insulators, fixing screws, nuts, bolts and washers etc. |
| 101 | Supply and fixing forGI strip of size 25x4 mm burried in ground/fixed on wall complete with porcelian insulator, fixing screws, nuts, bolts and washers etc. |
| 102 | Supply and fixing for GI strip of size 32x6mm burried in ground/fixed on wall complete with porcelane insulator, fixing screws, nuts, bolts and washers etc. |
| 103 | Material and labour for test point terminal block insulated from wall or external surface made of gun metal or phosphorus bronze of size 75x75x25 mm drilled and screwed including 3 Nos 8 mm dia 25 mm long hexagonal head screws complete all as specified anddirected. |
| 104 | Material and labour in replacement earth test point including GI/ Copper strip/ Clamp/ Nut/Bolt /Washer/Porcelain insulator complete all as specified and directed. |
| 105 | Material and labour in replacementplain cement concrete block in 1:3:6, C1,on roof top comprisingof required size at places where directed & laying,clamping the strip of any size securely on the block with suitable size GI bolt duly grouted, nut bolt washer etc all as specified and directed. |
| 106 | Material and labour in replacement earthing pit chamber including replacement of Cement concrete chamber of PCC (1:3:6) type C-2 using 40mm graded crushed stone aggregate the chamber shall be constructed one metre away from edge of earth pit with 50mm thick precast cover of cement concrete(1:2:4) type B-1 using 20mm graded crushed stone aggregate and MS angle iron 50x50x6mm frame including two coats of synthetic enamel painting over a coat of red oxide to exposed steel surfaces with suitable handle of 8 mm rod to lift the cover complete all as per specified and directed |
| 107 | Material and labour for fixing of display Board of 60cmx30cm forearth pit made out of 2 mm thick MS sheet welded on angle iron legs 0.75 mtr long (02Nos) of size 40x40x6mm duly embeddedin PCC block 1:2:4, type B-1, using gradedcrushedstone aggregate, of size 23x23x30cm fixed in ground including necessary earthwork. Display Board shall be painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in- Charge. The following is to be written on the board:- a) Earth Pit No. b) Checked on c) Next due date. |
| 108 | Material and labour for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick, burried directly in ground (earth pit not less than 2.25 Mtr deep below ground level ) with top edge of the plate not less than 1.5 Mtr below normal ground level, connected to galvanized iron wire of 4 mm dia earth lead by means of bolts, nuts ,washer and check nut of galvanized steel, earth wire protected by and including GI pipe 15 mm bore (light grade) and connected to maintest point as directed and including concreet pit in PCC (1:3:6) type C1, pre cast RCC (1:1.5:3) type A1 cover slab of size 54x54x5cm reinforced with 8mm dia TMT Bars @ 150mm C/C both ways with one handle for lifting, made out of 8mm dia TMT bar embeded in precast cover slab, wiremesh funnel, 20mm bore GI Pipe (Medium grade) for watering, charcoal and salt in alternative layers of 15cm thick all around the electrode, including necessary excavation and earth work in any type of soil including taking out old UNSV earth plate electrode etc complete all as shown in electrical plate No-3 of SSR part -I and testing on completion all as directed.Note :- GI wire 4 mm beyond 7.5 mtr shall be measured and paid separately under relevant items of Sch "A" |
| 109 | Material and labour for chemical earthing using outer & inner pipe of copper as earthing electrodes and hydroscopic jelly back fill for good conductivity complete all as directed (Dia of outer pipe shall be 65 mm, dia of inner pipe shall be 40 mm, length shall be 3 Mtrs, thickness of both pipes shall be 2.1 mm and made of minimum 95% copper metal) including copper earth strip of size 32x6 mm earth electrode to test point by means of brazing, bolts, nuts washer and check nut of brass, connected with in and including test point of bronze and 40mm GI pipe upto 7.5 Mtrwith copper testing point complete with PCC earth pit and 50 mm thick RCC pit cover using 20 mm graded crushed stone aggregate withTMT reinforcement bar 8 mm dia @ 150 mm center to center both ways, MS handle 10 mm dia made to shape with 50 x 50 x 6 mm angle iron frame duly painted, earth work in any type of siol connected to earthing test point and testing complete all as specified anddirected. |
| 110 | Earthing complete all shown as electrical plate No -05 of MES Sch part -I as specified with testing and as directed including the following. (i) Copperearth plate of size 600 x 600x 3.0 mm thick burried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.50 metre below ground level. (ii) Earth plate surrounded by and packed with charcoal and common salt in alternative layers ( n.exc 15 cms each layer). (iii) 32x6mm copper strip from earth plate to test pointby means of brazing, bolts, nut washers and check nut of brass and connected with test point of bronze all as directed. (iv) 20mm bore, medium grade, GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horizontaly to the earth pit. (v) 40 mm dia bore G. I. light grade pipe for protection of copper strip. (vi) Cement concrete chamber of PCC (1:3:6) type C-2 using 40mm graded crushed stone aggregate. The chamber shall be constructed one metre away from edge of earth pit. (vii) 50mm thick precast cover of cement concrete(1:2:4) type B-1 using 20mm graded crushed stone aggregate and MS angle iron 50x50x6mm frame including two coats of synthetic enamel painting over a coat of red oxide to exposed steel surfaces with suitable handle to lift the cover. (viii) Excavation in soft/loose soil, returning filling & removal of surplus soil to a distance of 50m as directed .Note :- Copper strip 32x6 mmat 7.5 mtr included in quoted rates. |
| 111 | Earthing complete all shown as electrical plate No -03 of MES Sch part -I as specified with testing and as directed including the following. (i) Galvanised steel earth plate of size 60x60cmx6mm thick burried directly in ground vertically to a depth not laess than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.50 metres below ground level. (ii) Earth plate surrounded by and packed with charcoal and common salt in alternative layers( n.exc 15 cms each layer). (iii) 32x6mm G I strip from earth plate to test point including necessary GI bolts, nuts, check nut, washers & thimbles etc. (iv) 20mm bore, medium grade, GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horizontaly to the earth pit. (v) 40 mm dia bore G. I. light grade pipe for protection of GI strip. (vi) Cement concrete chamber of PCC (1:3:6) type C-2 using 40mm graded crushed stone aggregate. The chamber shall be constructed one metre away from edge of earth pit. (vii) 50mm thick precast cover of cement concrete(1:2:4) type B-1 using 20mm graded crushed stone aggregate and MS angle iron 50x50x6mm frame including two coats of synthetic enamel painting over a coat of red oxide to exposed steel surfaces with suitable handle to lift the cover. (viii) Excavation in soft/loose soil, returning filling & removal of surplus soil to a distance of 50m as directed. Note :- GI strip 32x6mm beyond 7.5 mtr shall be measured and paid separately under relevant items of Sch "A". |
| 112 | Supply and fixing forGI wireof size 4 mm burried in ground/fixed on wall complete with clamp insulator, fixing screws, nuts, bolts and washers etc. |
| 113 | Servicing of Diesel Engine Generating sets 25 KVA rating to be carried out as per schedule given as under).:- B-Check (Every 1500 Hrs or 01 Year which ever is earlier) :- (i)Change lubricating oil (ii) Change lubricating oil filters (iii) Change fuel filters (iv) Change coolent (v) Check engine wiring for damage (vi) Drain fuel supply tank(vii) Change by pass lubricant filters (viii) Change air filters (ix)Check oil pressure (x)Change fuel water separator C- Check (Every 1500 Hrs or 01 Year which ever is earlier) :-(i)Adjust valves (ii)Steam clean engine(iii)Replace hoses as reqd (iv)Check turbo charger mounting nuts (v) Check engine oil heater (vi)Clean radiator(vii)Inspect following parts & replace as required (Alternator, starter etc)(viii)Clean fuel tank from inside (ix) Change Engine oil Note :(i) Maintenance of Diesel Engine Generating Set as per maintenance schedule chart . (ii)Schedule of service, Diesel Gen set M/C No wise is attached in PS. (III)Servicing of DG set will be done by Authorised dealer of Kirloskar/Cummins only. (iv) B-Check and C-Check spare parts will be measured and paid separately under supply only and fixing charges included with the servicing of DG set items i.e Item No 1 (1.1 to 1.10). |
| 114 | All as per serial item 99.00 above but DG set 180 KVA |
| 115 | All as per serial item 99.00 above but DG set 600 KVA |
| 116 | All as per serial item 99.00 above but DG set 810 KVA |
| 117 | Supply only new Fuel filter elements with "O" ring for 25 KVADG Set complete all as specified and as directed. |
| 118 | All as per serial item 100.00above but DG set 180 KVA |
| 119 | All as per serial item 100.00 above but DG set 600 KVA |
| 120 | All as per serial item 100.00above but DG set 810 KVA |
| 121 | Supply only new Lubricant oil filter cartridge element with "O" ringfor 25 KVADG Set complete all as specified and directed. |
| 122 | All as per serial item 101.00above but DG set 180 KVA |
| 123 | All as per serial item 101.00 above but DG set 600 KVA |
| 124 | All as per serial item 101.00 above but DG set 810 KVA |
| 125 | Supply only new air filter (both outer & inner) element with "O" ringfor 25 KVADG Set complete all as specified anddirected. |
| 126 | All as per item No- above but DG set 180 KVA |
| 127 | All as per item No- above but DG set 600 KVA |
| 128 | All as per item No- above but DG set 810 KVA |
| 129 | Supply only of fuel water separatorfilter complete with benjo bolt and washerfor 25 KVA capacity DG Sets complete all as specified and directed. |
| 130 | All as per serial item 103.00 above but DG set 180 KVA |
| 131 | All as per serial item 103.00 abovebut DG set 600 KVA |
| 132 | All as per serial item 103.00 above but DG set 810 KVA |
| 133 | Supply only of Engine oil CH4 15W40 grade in DG Set complete all as specified anddirected. Make :Castrol/Servo. |
| 134 | Supply only of Coolent of DG Set complete all as specified and as directed.Make-K COOL BY KIRLOSKAR/Castrol/BOSCH |
| 135 | Supply only of Oil pressure gauge ISI mark complete all as specified anddirected. |
| 136 | Supply only of oil temperature gauge ISI mark complete all as specified and directed. |
| 137 | Supply only of Fuel gauge meter ISI mark operated on 24V DC complete all as specified anddirected. |
| 138 | Supply onlyof high temprature diesel Hose pipe of 1250 PSI of size 10.3mm dia for connecting from engine to diesel tank complete with banjo bolt & washer. |
| 139 | Supply only of distilled water for battery complete all as directed |
| 140 | Dismantling /taking down completeradiator assy from DG set form diffrent capacityand transport to workshop for cleaning of the same with suitable cleaning reagent to remove rust & scaling , plugging of any water leakage by brazing and refixing including replacement of rubber hose pipe complete with jupiter clamps for any capacity of DG Sets, complete all as specified and directed. |
| 141 | Material and labour for dismantling of Exhaust pipe of silencer, cleaning of silencer to remove carbon deposit inside exhaust pipe and refixing including replacement of worn out rubber gasket packing and nut,bolts including replacement of asbestos rope 20mm complete all as specified and directed. |
| 142 | Dismantling of self starter 24V DC by disconneting battery connection , taking out to civil workshop for carrying out following reapair work and refixing including testing complete:- (i) Rewinding of armature & Field coil.(ii) Replacement of Carbon brush and solenoid switch (iii) Replacement of gear assembly . |
| 143 | Dismantling of self starter 12V DC by disconneting battery connection , taking out to civil workshop for carrying out following reapair work and refixing including testing complete:- (i) Rewinding of armature & Field coil.(ii) Replacement of Carbon brush and solenoid switch (iii) Replacement of gear assembly . |
| 144 | Supply and replacementself starter 12 Volts DC suitable for DG Set 25 KVAMake -LUCAS/BOSCH |
| 145 | Material and labour for spray painting to Panels, Enclosure ofDG sets, fire stand post duct plates etc atDG installations with two coats of synthetic enamel paint of approved colour after making the suface free from oil/grease/rust and applying a coat of red oxide primer complete all as specified anddirected. |
| 146 | Supply and fixing for maintenance free Battery 12V, 160 AHincluding battery lead positive & negative battery terminal complete duly charged . |
| 147 | Supply and fixing for maintenance free Battery 12V, 100 AHincluding battery lead positive & negative battery terminal complete duly charged . |
| 148 | Supply and fixing for Battery 12V, 180 AH with 25 electro plates including battery lead positive & negative battery terminal complete duly charged . |
| 149 | Supply and fixing forBattery 12V, 100 AH with 25 Nos Electro plates including battery lead positive & negative battery terminal complete duly charged . |
| 150 | Material and labour for Door joint and handle locks arrangement for any size/capacity DG set complete all as specified and directed. |
| 151 | Supply and replacement of compact type battery charger unitsuitale for charging01 Bty ,12 V 180 AH complete all as speified and directed with 2m copper leads -02 Nos & brass clamps. |
| 152 | Taking out FIP from DG set, of cap 180 transportation to authorised service centre for repair /maintenanceandrefixing to DG set including replacement of necessary spare parts such as Plunzers, governer kit with pin , Nozzels , Head ball guide kit, Head sheet , Rock rod, Rollar bearing , oil seal, piston & rings pin, jain kit and sleeves completeall as specified and directed. |
| 153 | Material and labour for cleaning of diesel tank of DG set of any capacity including replacement of worn out pipe line and measuring scale and fixing in original position and make it leak proof with necessary clamps complete all as specified and directed. |
| 154 | Supply and fixing in replacement of old control card (PCB) and connected itemsin control panel of DG set of capacity 810 KVA from OEM (SUDHIR) complete all as specified and directed. |
Copyright © 2023 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
