|
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains,pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspitsand the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: |
| 2 | a) All kinds of soil. |
| 3 | Providing and Laying ofquarry stone soling hand packed including ramming, watering & filling of interstices all costs and carriages involved COMPLETE |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8(1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)including all carriages costs of material involved |
| 5 | Supply and filling of RBM under rooms including compaction by ramming watering etc including all costs and carriages of materials involved COMPLETE |
| 6 | Providing and laying in position specified grade of reinforced cement concrete includingcuring but excluding the cost of centering, shuttering, finishing and reinforcement. i1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) including all carriagesand cost of Materials involved |
| 7 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centering, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) complete all inclusive. |
| 8 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) complete all inclusive. |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form for: |
| 10 | a) Foundations, footings, bases of columns etc. for mass concrete. |
| 11 | b) Columns, pillars, piers, abutments, posts and struts. |
| 12 | c) Lintel, beams, plinth beams, girders, bressumers and cantilevers |
| 13 | d) Suspended floors, roofs, landings, balconies and access platforms. |
| 14 | e) Edges of slabs and breaks in floors and walls under 20cm wide |
| 15 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete all inclusive(Mild steel and medium tensile steel bars). |
| 16 | Brick work with common burnt clay FPS bricks of class designation 7.5 in cement mortar 1:6 (1 cement: 6 course sand) in superstructure above plinth upto required floor level complete all inclusive. |
| 17 | Providing and fixing of ist class imported Kail wood work in frames of doors, windows, clerestory windows, partitions and other frames, wrought framed and fixed in position with hold fast, lugs or with dash fasteners of required dia and length including all carriage of materials as involved upto site of work as directed by EIC complete. |
| 18 | Providing 40x5mm flat iron hold fast 40cm long including fixing to frame with 10mm diameter bolts,nuts and wooden plugs and embeddings in cement concrete block 30x10x15cm 1:3:6(1: cement, 3:coarse sand,:6 graded stone aggregates 20mm nominal size) |
| 19 | Providing / Fixing ofPanalled or panalled and glazed shutters for windows , doors and clerestory windowsfixing with M.S. butt hinges with necessary screws excluding panelling which will be paid for separately all complete as per directions of Engineer-in-charge First class imported kail wood (35mmthick) i/c . All carriages, Leads & Lifts of Materials complete. |
| 20 | Providing / Fixing ofPanelling or panelling and glazing in panelled and glazedshutters for windows , doors and clerestory windows ( Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25mm to 40mmthick first class imported kail wood |
| 21 | Providing / Fixing ofglazed shutters for doors and clerestory windows using 4mm thick float glass panes including ISI marked M.S. Pressed butt hinges bright finished of required size with necessary screws .First class imported kail wood shutters 35 mm thick |
| 22 | Providing and Fixing 3.5mm glass including cost and fixing wooden fillets/beeding of required size and shape with nail including all carriages complete |
| 23 | Providing / Fixing 35mm wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4m in both directions of wire 0.63mm for doors,windows and clestry windows with ISI marked M.S. pressed butt hinges bright finish of required size necessary screws as per directions of EIC ist class imported wood |
| 24 | P/F of hardware fittings of approved quality |
| 25 | Stay hook 5\" |
| 26 | Handle5\" AI |
| 27 | Handle 8\" fancy type |
| 28 | T-Bolt 4\" |
| 29 | T-Bolt 6\" |
| 30 | Door Al drop with lock link/ramson 12\" |
| 31 | Door Al drop with lock link/ramson 10\" |
| 32 | Door stopper |
| 33 | P/F of stainless steel (Grade 304)railing made of Hallow tubes channels,plates etc incl. Welding,grinding,buffing,polishing and making curvature(wherever required) and fitting the same with necessary stainless steelnuts & bolts completei/c fixing the railing with necessary accessories and stainless steel dash fasteners,stainless steel bolts etc Of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of EIC (for payment purpose only weight of stainless steel members shall beconsiderd excluding fixing accessories such kilogram as nuts,bolts,fasteners etcincl. lifts,carriages of the material complete job |
| 34 | P/L Antiskid vitrified floor tiles in different sizes(thickness to be specified by manufacturer) with water absorption less than 0.08% and conforming to IS:15622 Of approved make,in all colours and shades,laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) incl. grouting the joints with white cement and matching pigments etc. complete size of tiles 300mm x 300mm |
| 35 | P/Lvitrified floor tiles in different sizes(thickness to be specified by manufacturer) with water absorption less than 0.08% and conforming to IS:15622 Of approved make,in all colours and shades,laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) incl. grouting the joints with white cement and matching pigments etc. complete size of tiles 600mm x 600mm |
| 36 | P/F of Ist quality ceramic glazed wall tiles conforming to IS;15622(thickness to be specified by the manufacturer)of approved makein all colours and shades,laid on 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) 7 jointing with grey cement slurry @ 3.3kg/sqm, including pointing in white cement mixed with pigment of matching shade complete (300mm x 450mm) |
| 37 | P/F of gangsaw cut,mirror polished,premoulded and prepolished, machine cut for kitchen platforms, vanity counters,window sills,facias,staircase riser & similar locations, of required size approved shade colour and texture laid over 20mm thickbase of cement mortar 1:4 ( 1 cement: 4 coarse sand) joints with white cement and matching pigments, epoxy touch upsincluding rubbing,curing,moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade incl skirting wherever required (18mm thick) |
| 38 | Providing edge moduling to 18mm marble stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. Complete asper design approved by EIC (Granite work) Double moulding |
| 39 | Provinding and casting of 12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand) Including all carriages costs of material involved |
| 40 | Providing /applying of white cement basedputty of 2mm thickness over plastered surface of approved brand and manufacture to prepare the surface even and smooth complete. |
| 41 | Applying priming coats with primer of approved brand and manufacture having low VOC ( volatile organic compound content. With water thinnable cement primer on wall surface having content less than 50 grams/litre |
| 42 | Wall painting with premium acrylic emulsion paint of interior grade having low VOC(volatile organic compound) content. Less than 50gram/litre of approved brand and manufacture i/c applying additional coats whever required to achieve even shade and colour(two or more coats) |
| 43 | Finished walls with textured exterior paint of required shade on New Work (two or more coats applied @3.28litre/10sqm) over and including base coat of exterior primer applied @ 2.2kg/10sqm |
| 44 | Applying priming coats with ready mixed pink or grey primer of approved brand and manufacture on wood work(hard and soft wood) |
| 45 | Painting with syntethic enamel paint of approved brand and manufacture of required color to give an even shade two or more coats on new work |
| 46 | Steel work welded in built up sections/ framed work including cutting, hosisting , fixing in postion andapplying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladders, railings, brackets, gates & similar works.i/c . All carriages, Leads & Lifts of Materials complete |
| 47 | Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. |
| 48 | Providing and Fixing percolated galvanized iron profile sheets (size,shape and pitch of corrugation as approved by E.I.C.) 0.50mm (+0.05%) total coated thickness with zinc coating 120grams per sqm as per IS:277, in 240mpa steel grade, 5-7 microns epoxy primer on both sides of the sheets and polyster top coat 15-18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12metre or as desired by E.I.C. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizental/verticle or curved surfaces, excluding the cost of purlins, raftersand trusses and including cutting to size and shape wherever required including all lifts,leads and carriages complete job |
| 49 | Providing and fixing precoatedgalvanised steel roofing accessories 0.50 mm (+0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS:277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyster top coat15-18 microns using self drilling/self tapping screws complete : Ridges plain (500-600 mm) |
| 50 | Providing valley of 90cm wide overall in plain G.S. Sheets fixed with polymer coated J or L hooks,bolts and nuts 8mm dia. G.I. Limpet and bitumen washers complete(1 .6 mm thick with zinc coating not less than 350 gram/sqm) |
| 51 | Providing and fixing of plain eves boarding 2nd class kail wood 300x40mm (nominal size) complete job |
| 52 | Providing and Fixing of soffits made out 12mm thick imported wood planks incl underneath frame work and scaffolding carriage complete (Badloo wood) |
| 53 | Cement concrete flooring 1:2:4(1 cement coarse sand 4 graded stone aggregate ) finished with a floating coat of neat cement including cement slurry but excluding the cost of nosing of steps etc complete. 50 mm thick with 20mm nominal size stone.i/c . All carriages, Leads & Lifts of Materials complete. |
| 54 | Dry random rubble stone masonry / Boulders in foundation Including all carriage/headloads and cost COMPLETE |
| 55 | Providing and fixing of floor mounted whiteviterous double trap syphonic WC with 10 litre cistern and all fittings & fixtures seat cover with all fittings including making good the walls and floors as requiredW.C pan with ISI marked white solid plastic seat and lid |
| 56 | Providing and fixingwash basin with C.I bracket, 15 mm dia CP Brass single hole basin mixer of approved quality and make including painting of fittings and brackets, cutting and making good the walls wherever required White vitreous China wash basin size 550 X 400 mm with a 15 mm CP Brass Single hole basin mixer |
| 57 | Providind and fixing stainless steel A ISI 304 (18/8) Kitchen sink as per IS : 13983 with CI bracket and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls whereever required Stainless steel kitchen sink -without drain board 610x510 mm bowl depth 200 mm (Assume for pantry) |
| 58 | Providing and fixing Cp brass 32 mm size bottle trap of approved quality and make and as per the irections ao engineer -incharge ( 32 mmDia 5 no.And40 mm Dia 1 no. ) |
| 59 | Providing Sink Mixer( wall mounted ) with 170 mm long swivel spout connecting legs and wall flanges(CERA cat. No. OCEAN F3002501 or approved quality ). |
| 60 | Providing and fixing Braided Hoses with two 15 mm CP BrassNuts Rubber Washers Without Nipple ( suitable for Geysers and Basins ) of 15 mm nominal bore |
| 61 | Providing and fixing toilet paper holder CP Brass |
| 62 | Providing and fixing, testing,commissioning of CP brass twin coat hook with concealed screws |
| 63 | Providing and fixing Health Faucet 15 mm dia with CP Flush pipe, CP nozzel hook complete including CP flange etc. |
| 64 | Providing, fixing, testing, and commissioning of CP brass towel ringhook with concealed screws |
| 65 | Providing andfixing CPBrass angle valve for basin mixer and geyeser points of approved quality conforming to IS:8931 15 mm nominal bore |
| 66 | Providing and fixing PTMT Soap dish holder having length of 138mm, breadth 102 mm, height of 75 mm with concealed fitting arrangements, weighing not less than 106 gms |
| 67 | Providing and fixing Horizontal / vertical Hot water geyser made of MS body with copper jacket inside with necessary inlet, outlet, drain, overflow, vent and all safety accessories etc. complete including cutting and making good the walls , wherever required 15 lit for kitchen ( for small toi. and pantry ) and 50 litre for shower |
| 68 | providing and fixing 600 X 450 mm beveled edge mirror of superior glass ( of approved quality ) complete with 6 mm thick hard board ground fixed to wooden cleats with cp brass screws and washers complete |
| 69 | providing and fixing C.P Brass / SS Long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms 15 mm nominal bore |
| 70 | SOIL, WASTE, VENT, & RAIN WATER PIPES Providing and fixing UV stablised UPVC pipes, type B as per is : 13592 for soil,waste, rain water and vent,including all fitings with or without access i.e clean out plug, bends, juncyions, cowls offsets, couplers, connectors, heavy duty meteal pipe clamps with rubber seal/ clips/ holders etc and jointing with heavy duty solvent cement, complete as per manufacturers specifications and makinggood the same, complete as directed by the Engineer -in- charge ( verticle pipe can be jointed through rubberorings) including cement concrete 1:2:4 mix 75 mm in bed and all around soil and waste pipes under floor, including shuttering and cenetring for 100 mm dia |
| 71 | providing and fixing proprietary polyshield outer mechnical protection on nitrile rubber insulation comprising of wrapping with poly glass tape helically wound and subsequently applying 2 coats of polyshield material ( resin & hardner) as per the manufacturers specifications and approved by project manager / consultants( location -inside the shift and open to the sky pipe only )100 mm Dia( 50 mm thick insulation ) |
| 72 | providing and fixing M.Sholder - bat clamps of approved design to sand cast iron / cast iron spun pipe embaded in and including cement concrete blocks 10X10X10 cm of 1:2:4 mix including cost of cutting holes and making good the walls etc 100mm dia pipe |
| 73 | providing and fixing multi inlet UPVC floor trap with minimum 50 mm water seal of self cleaning design with 110 mm outlet consisting of all necessary fittings and providing strainer of 150 X 150 mm square stainless steel 2 mm thick frame with slotted lockable grating on top of the trap level matching the level of floor finish etc, complete including cost of cutting and making good the walls and floors wherever required ( the inlet diameter shall be 32 mm, 40mm or 50 mm as per site requirement100 mm inlet and 100 mm outlet |
| 74 | providing and fixing upvc pipes as per IS 4985, class-3, 6 kgl/ cm2 with cement solvent joint complete with all fittings and clamps etc including cutting and making good the walls and floors for waste pipes from wash basins, urinals, sinksand balcony drainage, as directed by the engineer-in charge32 mm nominal bore |
| 75 | 40 mm nominal bore |
| 76 | 50 mm nominal bore |
| 77 | Providing and fixing SS grating with frame including fixing to the floor with cement mortar125 mm X 125 mm |
| 78 | Providing and fixing floor drain points formed out 0f 100 X 50 mm dia reducing elbow embaded in floor, all completion in all respecys as directed |
| 79 | providing and fixing G.I Pipes complete with G.I fittings and clamps, i/c making good the walls etc, concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall15 mm dia nominal bore |
| 80 | 20 mm dia nominal bore |
| 81 | providing and fixing PE-RT ( poly ethylene for raised temperatures ) Part- 2 pipe having thermal stability for hot and cold water supply ( -40 to 95 dC temperature ) including all PE-RT plain and brass threaded ( near tap ) fittings including fixing i/c fixing the pipe with clamp at 1.0 m spacing. this include joints of pipes with electro fusion method and the cost of cutting chases making good the same including testing of joints complete. 20mm dia. nominal bore |
| 82 | 25 mm dia. nominal bore |
| 83 | 32 mm dia. nominal bore |
| 84 | Providing and fixing ball valve ( brass ) of approved quality, High or low pressure with plastic floats complete 20 mm nominal bore |
| 85 | 25 mm dia. nominal bore |
| 86 | 32 mm dia. nominal bore |
| 87 | Providing and fixing proprietary polyshield outer mechnical protection on nitrile rubber insulation comprising of wrapping with poly glass tape helically wound and subsequently applying 2 coats of polyshield material ( resin & hardner) as per the manufacturers, specification and approved by project manager / consultants. Exposed on wall / terrace25 mm dia ( 19 mm thick insulation) |
| 88 | 32 mm dia ( 19 mm thick insulation) |
| 89 | Providing and fixing enclosed type water meter ( bulk type ) conforming to IS : 2373and tested by Municipal Board complete with bolts, nuts, rubber insertions etc ( the tail pieces if required will be paid separtely ) 80 mm dia nominal bore |
| 90 | providing and fixing C.I dirt box strainer for bulk type water meter with nuts, bolts, rubberinsertions etc. complete conforming to IS : 237380 mm diameter |
| 91 | Disinfecting C.I water mains by flushing with water containing bleaching powder @ 0.5 gms per litre of water and cleaning the same with fresh water, operation to be repeated three times including getting the sample of water from the disinfected main tested in the municipal laboratory 100 mtr80 mm diameter C.I. pipe |
| 92 | Providing and fixing of approved make float operated ball valve with brass/ copper heavy duty float confirming to IS 9762 & other associated accessories & works etc.. Complete for 80 mm dia pipe |
| 93 | Carriage of sand bajri for an average lead of 15 km\"s by mechnical transport |
| 94 | ElectrificationWiring for lightpoint/ fan point/ exhaust fan point/ call bell point with 1.5sq.mm FRLSPVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with modulars witch, modular plate, suitable GIbox and earthing the point with 1.5sq.mm FRLSPV Cinsulated copper conductor single core cable etc. as required. |
| 95 | Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc.asrequired. |
| 96 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required..3.1) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire(in minimum 20mm) |
| 97 | 2 X 4 sq. mm +1 X 4 sq. mm earth wire(in minimum 20mm) |
| 98 | 2 X 6 sq. mm +1 X 6 sq. mm earth wire(in minimum 25mm) |
| 99 | 4 X 10 sq. mm + 2 X 6 sq. mm earth wire(in minimum 40mm) |
| 100 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required 4.1 )3 x 1.5 sq. mm |
| 101 | 3 x 2.5 sq. mm |
| 102 | 3 x 4 sq. mm |
| 103 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 5.1 ) 20 MM |
| 104 | 25 MM |
| 105 | 32 MM |
| 106 | Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required. 6.1)100 mm X 100 mm X 60 mm deep |
| 107 | 150 mm X 150 mm X 60 mm deep |
| 108 | 200 mm X 250 mm X 60 mm deep |
| 109 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 110 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required |
| 111 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 Nos. 3 pin 5/6 A modular socket outlet and 2 Nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in Labs). |
| 112 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 113 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. asrequired |
| 114 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.1 or 2 Module (75mm X 75mm) |
| 115 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted includingearthing etc. as required. (But without MCB/RCCB/Isolator).12 way, Double door |
| 116 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/ Isolator) 6 way (4 + 18), Double door |
| 117 | Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 160 A, tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCCBs and incomer) as required. (Note : Vertical type MCCB TPDB is normally used where 3 phase outlets are required.)12 way (MCCB + 36), Double door. |
| 118 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.16.1 )Single pole |
| 119 | Triple pole |
| 120 | Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. |
| 121 | Supplying and fixing following rating, double pole, 240 V, MCB(10kA) in the existing MCB DB complete with connections, testing and commissioning etc. as required.25A |
| 122 | Supplying and fixing following rating, four pole, 415 V, MCB(10kA) in the existing MCB DB complete with connections, testing and commissioning etc. as required.40A |
| 123 | Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required40A |
| 124 | Supplying and fixing Cable End Box (Loose wire box)(IP 43) suitable for following single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with testing and commissioning etc. as required For 10 way, Double door SPN MCBDB |
| 125 | Supplying and fixing Cable End Box (Loose wire box)(IP 43) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with testing and commissioning etc. as required.For 6 way, Double door TPN MCBDB |
| 126 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 Meter long etc. with charcoal/ coke and salt as required |
| 127 | Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re- filling etc. as required. |
| 128 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connectionsetc. as required. |
| 129 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing asrequired |
| 130 | Providing and fixing 32 mm X 6 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re- filling etc. as required |
| 131 | Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.150 mm width X 50 mm depth X 1.6 mm thickness |
| 132 | Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray “bends” (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.150 mm width X 50 mm depth X 1.6 mm thickness |
| 133 | Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray “Tee” (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.150 mm width X 50 mm depth X 1.6 mm thickness |
| 134 | Supply of following sizes of Power Cables multi stranded Aluminium conductor, XLPE Insulated, cores laid up PVC tape / Extruded Inner sheath , Armour, FRLS at outer sheath,1100V grade as per IS 7098(Part 1) 1988 with upto date amendments. 3.5 CORES3.5 x 50 sq.mm |
| 135 | Supply of following sizes of Power Cables multi stranded Copper conductor, XLPE Insulated, cores laid up PVC tape / Extruded Inner sheath , Armour, FRLS at outer sheath,1100V grade as per IS 7098(Part 1) 1988 with upto date amendments.4 CORES32.1 ) 4x 6 sq.mm. |
| 136 | 4x 10 sq.mm |
| 137 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size on cable tray as required.33.1 ) Upto 35 sq. mm (clamped with 1mm thick saddle) |
| 138 | Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp) |
| 139 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.35.1 ) 63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 140 | 120 mm dia (OD-120 mm & ID-103 mm nominal) |
| 141 | Supply of indoor type surface mounted downlighter white CRCA powder coated LED light fixture with total system wattage 18W covered by PMMA acrylic diffuser, die cast aluminium housing, high efficiency reflector, prewired electronic driver complete with all accessories suitable for operation on single phase 240V 50Hz AC supply as required. LED shall be SMD type, fixture should have minimum efficacy >=100 lm/W and minimum system lumens 1800. Similar to Bajaj- or equivalent as per approved list of make |
| 142 | Supply of indoor type surface mounted downlighter white CRCA powder coated LED light fixture with total system wattage 18-20W covered by PMMA acrylic diffuser, die cast aluminium housing, high efficiency reflector, prewired electronic driver complete with all accessories suitable for operation on single phase 240V 50Hz AC supply as required. LED shall be SMD type, fixture should have minimum efficacy >=100 lm/W and minimum system lumens 2000. Similar to Similar to Bajaj- or equivalent as per approved list of make |
| 143 | Supply of indoor type surface mounted downlighter white CRCA powder coated LED light fixture with total system wattage 12-14W covered by PMMA acrylic diffuser, die cast aluminium housing, high efficiency reflector, prewired electronic driver complete with all accessories suitable for operation on single phase 240V 50Hz AC supply as required. LED shall be SMD type, fixture should have minimum efficacy >=100 lm/W and minimum system lumens 1400. Similar to Bajaj- or equivalent as per approved list of make |
| 144 | Supply, installation, testing, commissioning and numbering of indoor type 10W surface/wall mounted LED batten fitting (Mirror Light) covered by diffuser, high efficiency reflecctor, prewired electronic driver complete with all accessories suitable for operation on single phase 240V 50Hz AC supply as required. LED shall be SMD type. ( similar to BCLSB 10W LED Mirror light or equivalent) |
| 145 | Supply of indoor type surface mounted Linear LED fitting white CRCA powder coated with total system wattage 18-20W covered by PMMA acrylic diffuser, die cast aluminium housing, high efficiency reflecctor, prewired electronic driver complete with all accessories suitable for operation on single phase 240V 50Hz AC supply as required. LED shall be SMD type, fixture should have minimum efficacy >=100 lm/W and minimum system lumens 2000. Similar to Bajaj :- BCLAB 20W LED/ PHILIPS- BN108C LED 20S PSU CDL WH LED LUMINAIRE or equivalent as per approved list of make |
| 146 | Supply of 5 star rated 1200mm sweep ceiling fan, ISI marked, along with copper wound stator, blades, capacitor, downrod etc. but without regulator complete as required |
| 147 | Supply of 300mm dia sweep wall fan with Oscillating type complete with built in String type speed regulator and mounting arrangement. Similar to HAVELLS SWING HS orequivalent |
| 148 | Supply of 300mm dia sweep PVC body, 900±10% RPM Exhaust fan with guard and mounting arrangement |
| 149 | Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. |
| 150 | Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required. |
| 151 | Installation of exhaust fan in the existing opening, including making good the damage,connection, testing, commissioning etc. as required.Upto 450 mm sweep |
| 152 | Numbering of ceiling fan/ exhaust fan/ fluorescent fittings as required. |
| 153 | Supplying and fixing extra down rod of 10 cm length G.I. pipe,15 mm dia, heavy gauge including painting etc. as required. (Note: More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored) |
| 154 | Supply , Installation , Testing and commissioning of CAT 6 UTP cable 23 AWG solid copper conductors for Connectivity of Hub room to End Point.Approved Makes: Belden/Siemon/Panduit/Derwiser/ Rit |
| 155 | Supply, Installation, Testing & Commissioning of CAT6 information outlet (I/O) for Camera at user end.Approved Makes: Belden/Siemon/Panduit/Derwiser/ Rit |
| 156 | Supply, Installation, Testing & Commissioning of loaded 24 port CAT6 jack panel for CAT6 cable termination at rack end.Approved Makes: Belden/Siemon/Panduit/Derwiser/ Rit |
| 157 | Supply, Installation, Testing & Commissioning of loaded 24 port CAT6 jack panel for CAT6 cable termination at rack end.Approved Makes: Belden/Siemon/Panduit/Derwiser/ Rit |
| 158 | Supply, Installation, Testing & Commissioning of CAT6 patch cord 3 feet for rack side switch to jack panel connectivity.Approved Makes: Belden/Siemon/Panduit/Derwiser/ Rit |
| 159 | Supply, Installation, Testing & Commissioning of CAT6 patch cord 7 feet for information outlet (I/O) to end user device connectivity.Approved Makes: Belden/Siemon/Panduit/Derwiser/ Rit |
| 160 | Supply, Installation, Testing & Commissioning of 1, 2 and 4 port face plate white for I/O fixing at user side.Approved Makes: Belden/Siemon/Panduit/Derwiser/ Rit |
| 161 | Supply, Installation, Testing & Commissioning of 15U wall mount rack with fans , 2 cable managers , satationary shelf , 2 Nos. of hardware pkts.Approved Makes: Der Wiser/MTS/Rittal/APC/APW |
| 162 | Providing , installationand fabrication of sign Board 3\"x2\" ( 2MM) M.S sheet mounted on Angle Iron frame 50 x50 x6 mm 5 feet height embeded in cement concrete 1:2:4 |
