|
| 1 | Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) including all type of tiling, marble chips , terrazo finish where ever existing etc all as specified and directed. |
| 2 | Dismantling of floor, walls tiles incl bedding but not backing and rubbish off permises all as specified and directed. |
| 3 | Demolition of reinforced cement concrete above the ground floors n exc 15 cm thickness (Reinforcement cut as required to facilitate demolition)such as cooking platform, chajjas etc omplete all as specified and directed. |
| 4 | M&L for non skid ceramic colouredtiles 7 to 8 mm thick(square / rectangular) area of each tile exc 0.18 sqm & not exceeding 0.38 sqm in floors etc over and including 15 mm thick screed bed in cement mortar 1:6 set & jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and directed |
| 5 | M&L for glazed ceramic colouredtiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.18 sqm & not exceeding 0.38 Sqm , in vertical surface such as skirtings, dados etc, over and including 10 mm thick cement plaster in cement mortar 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement complete all as specified and directed |
| 6 | M&L for non skid ceramic colouredtiles 7 to 8 mm thick(square / rectangular) area of each tile exc 0.06 sqm and not exceeding 0.11 sqm in floors etc over and including 15 mm thick screed bed in CM 1:6, set & jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and directed. |
| 7 | M&L 25 mm thick cement concrete (1:2:4), type B-0, using 12.50 mm graded stone aggregate as in floors including finishing the surface stone rough & even for receiving tiles/ kota stone complete all as specified and directed. |
| 8 | M&L for 450x300 x7 mm thick glazed ceramic tilesas in dado/skirting and vertical surfaces set & jointedin neat cement slurry and pointed in colored cement to match theShade of tiles over and incl10 mm thick bedding in cement mortar 1:4 complete all as specified and directed. |
| 9 | Demolition of brick work build in cement mortar including all quoins, arches, pillars, complete all as specified and directed. |
| 10 | M&L brick work with sub class \"B\" brick straight or curved on plan exc 6m means radius built in cement mortar 1:6 complete all as specified and directed. |
| 11 | M&L Brick work with sub class \"B\" bricks straight or curved on plan to any radius built in cement mortar 1:4 in half brick thick wall complete all as specified and directed. |
| 12 | M&L PCC 1:4:8 type D-2 (40mm graded stone agg) in fdn, sub base, mass concreteetc. complete all as specified and as directed.. |
| 13 | M&L 40 mm thick cement concrete (1:2:4), type B-1, using 25 mm graded stone aggregate as in floors including finishing the surface even & smooth without using extra cement complete all as specified and directed. |
| 14 | M&L 50 mm thick PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in plinth protectionfinishing even & fair without using extra cement laid in bays with construction, 6mm thick joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 80/100 gde and three part of sand ( all by weight) complete all as specified and as directed.. |
| 15 | M&L for providing precast cement concrete of RCC 1:2:4 type B-1 (using 20mm graded stone agg) for landings,chajjas, shelves and similar articles with plain facesetc.with plain fair faces, includingchamfers, weatherings, throating etc. and setting in mortar complete with joints to match the shade set in CM 1:6 including necessary form work complete. |
| 16 | Taking down cement plaster on wall/ceiling /roof etcincluding raking out joints, hacking for key and scrubbing down with water etccomplete all as specified and as directed.. |
| 17 | M&L 15 mm thick rendering on fair faces of brick /concrete surfaces of wall in CM (1:6), finished even and smooth (Without using extra cement ) complete all as specified and directed. |
| 18 | M&L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces,second layer (finishing coat)mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer\"s instructions and finished the surfaces even and fair without using extra cement complete all as specified and as directed..Note:Liquid WPC will be measured and paid separately. |
| 19 | M&L Rendering 5mm thick in cement mortar 1:3on concrete surface of ceiling and finishing the surface even and smooth complete all as specified and directed |
| 20 | Supply only water proofing compound (liquid),complete all as specified and directed. |
| 21 | Taking down chowkats or frame with shutters (without taking off shutters from the frames) n. exc 1.5 Sqm each complete all as specified and directed. |
| 22 | All as per above item No 21.00 but exc 1.5 Sqm but n.exc. 4 Sqm each. |
| 23 | Taking down shutters of any description exc 1.00 Sqmand n exc 2Sqm each complete all as specified and directed. |
| 24 | S & F 35 mm thick2nd class hardwood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (with out sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc fitted to chowkatsfor door etc complete, size of member of shutter as specified in SSR Part -I, Sec 8, clause 8.20 (a) complete all as specified and directed. |
| 25 | S & F of 35 mm thick (Batten thickness) factory made plain, framed, panelled shutters (Two panels) with lock rail and panel of 9 mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces and size of the members of shutter are as per IS – 1003 (Part – I) made of kiln seasoned & chemically pressure treated 2nd class hardwood complete all as specified and directed. |
| 26 | S & F 30 mm thick flush shutters solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 27 | S&F steel windows with side hung shutters including projecting type hinges with MS handles,hold fast,tower bolts and hold fast complete with glazing& wire gauzed bars dovetailed or welded with one shop coat of zinc chromate primer complete all as specified and directed. |
| 28 | S&F steel windows with side hung shutters including projecting type hinges with MS handles, hold fast and tower bolts complete with out glazing& wire gauzed bars dovetailed or welded with one shop coat of zinc chromate primer complete all as specified and directed. |
| 29 | S&F steel ventilators with top hung shutters including hinges, steel peg stay and hold fast complete all as specified and directed. |
| 30 | S&F Mild steel framed works such as grills,gratings,etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work for portions framed and hung as gates, including pintle hinges, stops, hand made sliding bolts including welding etc conforming to Fe 290 Gde -E-165 complete all as specified and directed. |
| 31 | S & F pressed steel frame of size 105mm X 60 mm and 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs (hold fast), hinges, lock strike plates etc.,complete all as specified and directed. |
| 32 | S & Fpressed steel frame of size 125mm X 60 mm and 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, hold fast lock strike plates etc.,complete all as specified and directed. |
| 33 | M & L for plain cementconcrete 1:3:6 type C-0 (using 12.50 mm graded stone aggregate), as in back filling of pressed steel frames and similar work including necessary form work as required complete all as specified and directed. |
| 34 | S & F SolidPVC door frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws as per specification & drawings as given in SSR part - II (2020 print)complete all as specified and directed. |
| 35 | S&F Factory Made Solid PVC Moulded Door Shutter, & kitchen cupboard shutters with particle board core 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing all as spd. |
| 36 | S & F 100 mm size Butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed complete all as specified and directed. |
| 37 | S&F aluminum alloy anodised sliding door bolts with hasp & staple & fixing clips of sheet cast extruded section & fixing bolts & sliding bolts of extruded section 300 mm long complete all as specified and directed. |
| 38 | S&F mild steel, 300mm long ordinary helical door spring incl roller and roller platecomplete all as specified and directed |
| 39 | S&F 150mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed |
| 40 | S&F 150 mm extruded aluminium alloy handles, fabricated type anodised complete all as specified. |
| 41 | S & Ffloor door stopper 140 mm overall length of cover plate of aluminium alloy body and tongue, anodised. With hard drawn spring, fixed in floor. complete all as specified and directed |
| 42 | S&F small fitings of 2nd class hard wood such as brackets of any type, latch and hing block shape door, window stops and the like incl all necessary labours articles not exc 200 cum each including MS butt hinges medium weight cold rolled 50mm long all as specified & directed. |
| 43 | S&FGI wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple complete all as specified. |
| 44 | S&F in repair GI wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple complete all as specified. |
| 45 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames / steel frames glazed with oil putty or fixed with beads complete all as specified and directed. |
| 46 | S& F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and directed. |
| 47 | S & F 3 mm thick figured glass pin head type and glazing with oil putty in squaresn exc 0.5 Sqm in each pane etc complete all as specified and directed. |
| 48 | M & L for 2nd class Hard wood as in plain fillets, square, rectangular, traingular in section clean sawn secured with nails or brads of sectional area exc 13 but not exc 25 Sq cm complete all as specified and directed. |
| 49 | S&F in repair 18/19 mm thick Block boards, grade 1 quality, exterior grade, decorative type with decorative face veneer on one face, including teak wood lipping, 6 mm thick on sides complete for cupboard shutterandshelves all as specified and directed |
| 50 | S&F 100mm long hasp & staple aluminium anodised wire type,incl bolt to hinge plate and fixed with screw complete. |
| 51 | S & F in rapair mild steel conduit curtain rod with PVC coating fancy type drapery rod 20 mm dia of any colour as approved complete all as specified and directed. |
| 52 | S&F Fancy type mild steel Bracketswith PVC coating of colour as approvedcomplete all as specified and as directed. |
| 53 | Taking up or down steel tubing and connections 15 mm dia complete all as specified and directed. |
| 54 | Taking up or down steel tubing and connections,of 20 mm dia complete all as specified and directed. |
| 55 | S&F Tubes, ‘medium grade’ galvanized, with all fittings and fixed complete to walls and ceilings or laid in floors of 15 mm dia complete all as specified and directed |
| 56 | S&F tubes medium grade galvanized with all fittings and fixed to walls or laid in floors of 20mm bore complete all as specified and directed |
| 57 | Fixing only 15 mm bore galvanised steel water tubing medium gradewith and including all new fittings and fixed to walls and ceilings or laid under floors, including cleaning for re-fixing of old pipe complete all as specified and directed. Note:- old pipe shall be used retrived from srl item No. 53 |
| 58 | Fixing only 20 mm bore galvanised steel water tubing medium gradewith and including all new fittings and fixed to walls and ceilings or laid under floors, including cleaning for re-fixing of old pipe complete all as specified and directed. Note:- old pipe shall be used retrived from srl item No. 54 |
| 59 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exc 10 CM girth complete all as specified and directed. |
| 60 | S&F in repair vitreous china WHB size 550x400 mm white flat back including PVC waste pipe but excluding taps, waste,but including MS brackets with two coats of synthetic enamel painting over a coat of red oxide primer etccomplete all as specified and directed. |
| 61 | S&F in repairs white vitreous china wash down water closet pan pedestal pattern (white) excluding fixing bolts, flushing cistern and flush pipe complete all as specified and directed. |
| 62 | S&F in repair vitreous china squatting pan, Orissa pattern of size 580 x 440 mm white, with integral foot rest,\"P\" or \"S\" trap including connection to trap, and to flush pipe, anti-syphonage pipe etc. and making good to floor complete all as specified and directed. |
| 63 | S&F in repair 10 Ltr capacity PVC valveless shyphonic action type low level flushing cistern white with inlet, ball valve, float valve and handle incl bracket and flush pipe fixed to wall ,complete all as specified and directed. |
| 64 | S&F in repair brass chromium plated health faucet for EWC with 8 mm dia PVC pipe 1.20 m long including nut/washer complete all as specified and directed. |
| 65 | S&F in repairs PVC connection 15 mm dia size and 450 mm long with 2 Nos brass check nuts its washers complete all as specified and as directed. |
| 66 | S&F in repair 5 mm thick looking mirror 600 x 450 mm selected quality glass mounted on 6 mm thick commercial plywood, with aluminium beading and fixed to wall with brass screws, cups and washers complete as specified and directed. |
| 67 | S&F in repair bib tap 15 mm bore fancy type cast copper alloy chromium plated with capstan head screwed down screwed for iron pipe or for brass ferrule fixed to iron pipe etc. complete all as specified and directed. |
| 68 | S&Fin repair Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe15 mm bore, chromium plated with crutch or butterfly handle, or for brass ferrule complete. |
| 69 | S&F in repair pillar tap 15 mm bore fancy type cast copper alloy chromium plated, cast copper alloy, screwed down, high pressure, with capstan head, with or without lettered \"HOT\" or \"COLD\" with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. |
| 70 | S&F in repair brass CP steel tubular towel rail 20 mm dia \"D\" type 60 cm long complete all as specified and directed. |
| 71 | S&F in repair 15 mm dia stop cocks, cast copper alloy, chromium plated with long shank and cup (concealed type), high pressure with capstan head handle, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 72 | S&F in repair angle cock15 mm bore fancy type chromium plated, with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe complete all as specified and directed. |
| 73 | S&F in repair two way angle cockwith wall flange 15 mm bore fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe complete all as specified and directed. |
| 74 | S&F Corner glass shelf 300mm (with brass brackets) including fixing arrangements complete. Make-Prayag(Cat No BEA-44) or equivalent as approved by GE complete all as specified and directed. |
| 75 | S&F in repair of stainless steel soap dish, of standard size and shape complete all as specified and directed. |
| 76 | S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen with plugs, washers and wastes, incl bedding in cement mortar to dwarf wall or incl fixing suitable sizes of cantilever brackets and connecting union to pipe overall size 915mm x 460 mm, bowl size 410 x 330 x 160 mm complete all as specified and directed. |
| 77 | S&F in repairs sinks withoutdrainge board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; & pvc waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed. |
| 78 | S&F in repair 0.63 mm thick kitchen plate rack made of stainless steel 900 x 750 x 220 mm size fixing with wooden plug with suitable size of screws complete all as specified and directed. |
| 79 | S&F in repair chromium plated overhead shower rose swivel type 125 mm with CP arms 300 mm long complete all as specified and directed. |
| 80 | S&F PVC (SWR) \"P\" trap for 110 mm dia etc complete all as specified and directed. |
| 81 | M&L for RCC as in kitchen platform, shelves & chajjas etc type B1 1:2:4 (20 mm graded stone aggregate) including necessary form work complete. |
| 82 | M&L for18- 20 mm thick granite slab (of any type) work(table rubbed and polished) in cooking platforms, steps, window cills, incl edge moulding & cutting holes for gas pipe through drill machine and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed |
| 83 | S&F MS TMT bar 8 dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.90mm dia or securing with clips. |
| 84 | Taking down PVC/AC upto 110 dia bore pipes (including all fittings),complete all as specified and directed. |
| 85 | S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified and directed. |
| 86 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with brackets etc of 110 mm dia complete all as specified and directed. |
| 87 | S&F PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified and directed. |
| 88 | S&F PVC (SWR) pipes 50 mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified and directed. |
| 89 | S&F PVC(SWR) bend of110 mm dia of any radius etc complete all as specified and directed. |
| 90 | S&F PVC (SWR) bends any radius provided with access door of 110 mm dia complete all as specified and directed. |
| 91 | S&F PVC(SWR) Tee of110 mm dia etc complete all as specified and directed. |
| 92 | S&F PVC (SWR) bends any radiusprovided with access door of 75 mm dia complete all as specified and directed. |
| 93 | S&F PVC (SWR) branch pieces, single (equal or un equal) , ordinary or inverted (spigot or socket type) or with parrallel branches of 110 mm dia with access door complete all as specified and directed. |
| 94 | S&F PVC (SWR) nahani/ floor trap, plain with grating with or without waste hole including jointing with solvent cement 75mm dia etc complete |
| 95 | Dismantling water tanksof capacity exc 250 and n exc 500 ltrs complete all as specified and directed. |
| 96 | Dismantling water tanksof capacity exc 500 and n exc 1000 ltrs complete all as specified and directed. |
| 97 | S&F 500 Ltrs capacity rotational moulded polythene water storage tanks in three layer cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed (specified in SSR Part-I). |
| 98 | ~Ditto~ all as per item No. 97.00above but 1000 Ltrs capacity. |
| 99 | S&F 20 mm ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball srewed for iron pipe and fixed (minium weight 20mm-210) gms complete all as specified and directed. |
| 100 | S & F in repair 20 mm bore dia gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 101 | M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified and directed. |
| 102 | M & L preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 103 | Removing old paints by paint removes or burning off by blow lamps and cleaning with scrapers, any number of coats,any width or girth complete. |
| 104 | M&L Preparing old wooden surfaces exceeding 10Cm in width or girth and applying two coat of synthetic enamel paint complete all as specified and directed. |
| 105 | M&L Preparing old steel surfaces exceeding 10Cm in width or girth and applying two coat of synthetic enamel paint complete all as specified and directed. |
| 106 | M&L for applying 2mm thick Birla / JK Putty in two layers on old wall surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and as directed |
| 107 | M & L for preparation of newly plastered surfaces ofwall and applying 2 mm thick wall care puttycomplete all as specified and as directed |
| 108 | M&L for applying two coats of oil bound distemper on wall over a coat of primer including preparing the surface complete all as specified and as directed |
| 109 | M&L for applying 1mm thick Birla / JK Putty in two layers on old ceiling surfaces including complete removal of existing finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and directed. |
| 110 | M & L for preparation of newly plastered surfaces ofceiling and applying 1 mm thick wall care putty including preparation of new surface complete all as specified and directed. |
| 111 | M&L for applying two coats of oil bound distemper on ceiling over a coat of primer on prepared surfaces including, rubbing with sand paper complete all as specified and directed. |
| 112 | M&L for preparation of old decorated surfaces of walls by washing, rubbing down and scrapping of distemper surfaces and applying one coat of Oil Bound Distemper of any light shade complete all as specified and directed. |
| 113 | M&L for preparation of old decorated plastered or unplastered surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coat of white wash complete all as specified and directed. |
| 114 | M & L for preparation of old plastered or un-plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed. |
| 115 | M&L preparation of new plastered or unplasteredsurfaces of wall and applying two coats of cement based paint over a coat of primer complete all as specified and directed. |
| 116 | M&L Preparing old painted surfaces of walls, chajjas etc by washing, rubbing down and stopping and applying two coat of cement base paint white or tinted complete all as specified as directed. |
| 117 | Demolition of concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 118 | Preparing surface of sunken slab and applying 15 mm thick plaster in cement mortor 1:4 mixed with and including integral water proofing compound both on floor and wall.The surface shall then be cured and allowed to dry then applying Epoxy Resin coating polymer modified cementitious coating like brush bond of Fosroc, Pidilite and Bostic as per manufacturer\"s instructions both on floor as well as on wall and sunken floor complete all as specified. Note : Cement concrete shall be measured and paid separately |
| 119 | M&L PCC type C2, 1:3:6 (40 mm graded stoneaggregate) as in sunken slab filling complete all as spd and as directed |
| 120 | M&L for cleaning steel wire brushing and rust remover and (reebaklens solution) to exposed corroded reinforcement @ 0.20 Ltr/Sqm of exposed reinforcement bars/structural members surfaces at any height and applying minimum 40 micron thick (dry film thickness) coat of epoxy zincrich primer (Nitozink primer of M/s Fosroc chemicals (India) Pvt Ltd/ M/s Choksey chemicals @ not less than 0.25 litre per sqm of exposed steel reinforcement at any height and providing rendering 10 mm thick cement & sand mortar 1:3 using liquid water proofing compound Nitobond AR not less than 2% by weight of cement of M/s Fosroc / M/s Pidilite / M/s Choksey chemicals, at any height including scaffolding, complete all as per manufacturers instructions and all as specified and directed. |
| 121 | Dismantling AC (corrugated, semi corrugated etc), sheet as in roof covering complete all as specified and directed. |
| 122 | Dismantling unframed timber scantling 40 Sq cm and over in section, in any position complete all as specified. |
| 123 | S & F for rolled mild steel structural steel work as in trusses in (tubular/rectangular/square) including purlins, rafter, special shaped washer etc. completeusing any dia of MS pipe medium grade/angle or using ERW or induction butt welded tubes/angles conforming to I. S.1161-1979 gradeSt.-240 complete all as specified and directed. |
| 124 | S&F MS work conforming to Fe 310-O as in FI fillets for securing roof sheeting etc cut to length bent to shape with necessary cuts, drilling holes etc all as specified. |
| 125 | S & F of 6 mm thick asbestos cement corrugated or semi-corrugated sheets fixed with ‘L’ type or ‘J’ type or cranked hook bolts and washers as in roof covering, walls etc. complete all as specified and directed. |
| 126 | S & F of 6 mm thick asbestos cement two-piece adjustable plain wing ridge fixed with coach screws and washers as in roof covering, walls etc. complete all as specified and directed. |
| 127 | Fixing only except sheet of 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with Jor L type hook bolt complete all as spd and directed.Note : Old sheet obtained form Item No 94 shall be re-used. |
| 128 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated or semi corragated steel sheet 0.50mm thick of an colour having tensile strentth of 550 Mps as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed . |
| 129 | S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mps as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed . |
