|
| 1 | Earth work in excaviation in foundation trenches in ordinary soil (vide classification of soil item A) & disposal of excaviated earth as ovrained to a distance upto 50 mnincluding all lifts, levelling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approve design, building specification & direction of E/ incharge |
| 2 | Extra for earth work in hard soil as per specification and direction of engineer incharge(vide classification of item B) |
| 3 | Earth work in filling in sub floor trenches and plinth in layersnot exceeding 150 mm thick, well watered, rammed, fully conpared and fine dressed with earth obtained after cutting within lead of 50m and lift of 1.5m all completed as per direction of the E/I( mode of measurement compacted volume). |
| 4 | Providing coarse clean sand in filling in foundation trecches or in plinth including rammingamd watering in layers not exceeding 150mm. Thick with all leads and lifrs including cost of all materials, labours, royality and taxes all complete jobs as per building specification and direction of the E/I . ( mode of measurement compacted volume) |
| 5 | Providing degination 75B one brick flat soiling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of the E/I. |
| 6 | Providing and laying in position cement concrete of soecified grade excluding the cost the cost of centering and shuttering all work up to plinth level(1:4:8) |
| 7 | Providing and laying in position reinforced cement concrete of soecified grade excluding the cost the cost of centering and shuttering all work up to plinth level(1:1.5:3)M20 |
| 8 | Providing cement concrete works in walls including attached pilasters butteress plinth and string courses fillets columns pillars piers abutment post and struts etc. above plinth level upto floor five level rxcluding cost of centering shuttering finishing and reinforcement: (1:1.5:3) M20 |
| 9 | Providing reinforcement concrete work in beam suspended floors roofs having slope upto 15 degree landing balcony shelves do.. Do.. As per E/I. (Rcc M20) |
| 10 | Providing Tor steelreinforcement as per approved design & drawing. |
| 11 | Providing Tor steelreinforcement of 10 mm dia bar as per approved design & drawing. |
| 12 | Providing Tor steelreinforcement of 12 mm dia to 20 mm dia bar as per approved design & drawing. |
| 13 | Centering including struting , proping etc and removal form for Foundation footing bases for column etc. |
| 14 | Column, piers ,Pillars etc |
| 15 | Lintel beams ,plinthbeam etc. |
| 16 | Walls includin attached pillars etc. |
| 17 | Suspended floors ,roof, landing balconies etc. |
| 18 | Providing desination 75B brick work in cement mortar (1:6) in foundaton & plinth with approved quality of clean coarse sand of F.M 2 including providing 10mm th.mortar joints cost of screning materials, racking out joints to 15mm depth, curing, taxes and royalty all complete as per build specification and direction of E/Incharge. |
| 19 | Providing desination 100A brick workwith fly ash lime brick (flab) in cement mortar (1:6) in super structure with approved quality of clean coarse sand of F.M 2 including providing 10mm th.mortar joints cost of screening materials, racking out joints cost of screening materials, racking out joints to 15mm depth, curing, taxes and royality all complete as per build . specificationand direction of E/ in charge. |
| 20 | Providing desination 112 mm thickreiforced designation 100A brick work with fly ash lime brick in cement mortar (1:4) in super structure with approved quality of clean coarse sand of F.M 2 including providing 10mm th.mortar joints cost of screening materials, racking out joints cost of screening materials, racking out joints to 15mm depth, curing, taxes and royality all complete as per build . specificationand direction of E/ in charge. |
| 21 | Extra for providing and placing in position 2 no. 6mm dia M.S. Bar every 3rd corse of half Brick masonary. |
| 22 | Supplying fitting and fixing 35 mm thick solid core type non decorative sigle leaf flush door shutter in doors and widow with black board do.. Do as per E/i. |
| 23 | Providing and fixing wooden moulded beading to door and window frames with iron screw, plugs and priming coat etc. |
| 24 | Providing and fixing bright finished brass 100 mm mortish latch and lock ISI marked with six levers etc. |
| 25 | Providin and fixing aluminium hanging floor door stopper ISI marked anodised transparent or yied to required colour or Shade. |
| 26 | Providing and fixing aluminium extruted section body tublar type universal hydraulic door closer with double speed adjustment with necessary accessories. |
| 27 | Strucural steel work in single section fixed or without connecting plate including cutting hoisting ,fixing in position and applying prime coatof approved steel primer etc. |
| 28 | Providing and fixing prestressed steel door frame confirming to IS 4351manufactured from commercial mild steel sheet of 1.60mm thickness including hingeg do.. Do.. As per E/i. |
| 29 | Supplying , fitting and fixing M.S grill made of 20 X 6mm. M.S flat/ square bars as per approved design & drawing, properly fibricated with joints contiuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I. |
| 30 | Supplying fitting and fixing collapsibble gate of approved size nad make properly fabricated with vertical double channels 20x10x2 mm at 100 mm centres and braced with 100 mm centres do…do… as per E/I. |
| 31 | Supplying fitting and fixing glass panes including supplying putty beads and nails afterdo.. Do.. As per E/I. |
| 32 | ProvidingandlayingDoublecharge vitrifiedfloor tilesindifferentsizes (thicknesstobespecified bythe manufacture)with water absorption lessthan 0.08%andconformingto IS: 15622/ ISO 13006, of approved make, in all colours and shades, laid on 20 mm thick cementmortar 1:4 (1cement:4coarse sand)jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigmentsetc.complete SizeofTile 600 x 600 mm |
| 33 | Providing and fixing granite 18 mm thick gangsaw cut mirror polshed, premoulded and prepolished machine out for floorin kitchen platforms do… do… as per E/I. |
| 34 | Providing edge moulding to 18 mm thick marble/ granite counters ets as per E/I. |
| 35 | Extra for providing opening of required size and shape for wash basin /kitchen sink do… do … as per E/I. |
| 36 | Providng and fixing stone slab with table rubbed edge rounded polished of size 75x50 cm deep and 1.8 cm fixed in urinal etcdo..do.. As per E/I. |
| 37 | Providing and laying 1st qualityCERAMICglazedTILES oover 12mm cement mortar (1:3) and jointed with white cement slurry flush pointed with white cement including rubbing, polishing and cost of curing taxes, and royalty all complete as per building specification and direction of E/I with grade A coloured 15 cmx15 cm tiles. |
| 38 | Providng ceramic glazed floor tiles of size 300x300mm of 1st quality do… do… as per E/I. |
| 39 | Providingandlaying25mmThickkotah stoneslabflooringofapprovedsize , textureandcolourlaidover 19mm. Thick baseoflimemortar (1:1:1)(lime putty : surkhi : coarsesand ) andjointedwithgray cement slurrymixedwithpigmenttomatchtheshadeofslabincludingrubingandpolishingto granolithicfinishwithapprovedqualityofcarborundumstoneincludingcostofcuring , taxesandroyaltyallcompleteasperbuildingspecificationanddirectionofE/I.Size 600x600 |
| 40 | Providingandlaying25 mm.Thickkotah stonetilesinrisersofsteps , skirtingandpillersofapprovedsize , textureandcolourlaidover 12mm. Thick cementmortar(1:3)andjointedwithgray cement slurrymixedwithpigmenttomatchtheshadeofslabincludingrubbingandpolishingto granolithicfinishwithapprovedqualityofcarborundumstoneincludingcostofcuring , taxesandroyaltyallcompleteasperbuildingspecificationanddirectionofE/I. |
| 41 | Providin single layers Naria - tiles in roof including including cost of all labour and material taxes all complete as per E/I. |
| 42 | Providing gola 75x75 mm in cemnt concrete (1:2:4) including cement mortar (1:3).do…do… as per E/I. |
| 43 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 over PVC sheet do …do… as per E/I |
| 44 | Groove of PCC surface should be filled with polysulfide sealant. |
| 45 | Covering with treated surface with PCC Providing 25 mm thick C.C. M20 do…do… as per E/I. |
| 46 | Providing and filling of groove between 25 mm PCC panels with polysulphide sealant do…do… as per E/I. |
| 47 | Toilet /Kitchen water proofing 1)surface preparation by grinding machine a)1st layer of sluury of cement @ 0.488kg/sqm b) 2nd layer of sluury of cement @ 0.242kg/sqm |
| 48 | Providing 12mm. Cement plaster (1:6)l with clean coarse sand of F.M .15. including cost of carriage, screening, curing with all lead and lifts of water,scaffolding, taxes and royalty all complete as per building specifications and direction of the E/I. |
| 49 | Providing 6mm, cement plasters (1:4) in ceiling with clean coarse sand of F.M 1.5 including cost of carriage, screening , curing with all lead and lifts of water, scaffolding taxes and royalty all complete as per buiding specifications and diarection of the E/I. |
| 50 | Providing and applying white cement based putty of average thickness 1mm of approved brand and manufacturedo..docomplete as per E/I. OUTSIE |
| 51 | Add for plaster drip coarse Groove in plasterd surfaceor moulding to RCC Projections. |
| 52 | Finishing wall with Acrylic smooth exterior paint of required shade(new work two or more coat applied @ 1.67 litre/10 sqm) |
| 53 | Providing two coats of Oil bound distempring of approved shade and make over a coat of cement primer over new surfacedo…do… as per E/I. |
| 54 | Painting with synthetic enamel paint of approved shade and mnufacture do…do… as per E/I. |
| 55 | Finishing wall with Acrylic smooth exterior Local art paint of required shade new work do..do… as per E/I. |
| 56 | Providing and fixing aluminium for door window ventilators and partitions with extruded builtup standard tublar sections do…do.. As per E/I. |
| 57 | For shutters of door window and ventilators including providing and fixing hingegand all fittings do.. Do.. As per E/I. |
| 58 | Making plith protection 50 mm thick of cement concrete 1:3:6 over 75 mm thick bed of dry brick blast do.. Do as per E/I. |
| 59 | Making soak pit 2.5 m diametre 3.00 M deep. |
| 60 | Providing and fixingcircular/ Hexagonal cast iron or MS sheet box for ceilling fan clamps 12 mm dia MS bar. |
| 61 | Carraige of materilas:-(a) cementlead 05 km |
| 62 | (b) sand lead 08 km |
| 63 | ©stone chips 21 km |
| 64 | (d)metal 21 km |
| 65 | (e)Fly Ash Bricks 10 km |
| 66 | (f) steel |
| 67 | Point wiring in PVC conduit with piano type switch Wiring for light point /call bell point / exhaust fan point with 1.5 sqmmFRPVC insulated coper conductor single core cable in surface / recessed PVC conduit with paino type switch phenolic laminated sheet with suitable size of Msbox and erthing the point with 1.5 sq mm FRPVC insulated copperconductore single core cable etc as requiredGroup C |
| 68 | power plug Wiring in pvc conduit 2x4 sq mm wiring for light /power plug with 2x4 sq mm frpvc insulated copper conductor single core cable for loop earthing as required. |
| 69 | power plug Wiring in pvc conduit 4x4 sq mm wiring for light /power plug with 4x4 sq mm frpvc insulated copper conductor single core cable for loop earthing as required. |
| 70 | Wiring for circuit /submain wiring alongwith earth wire with the follwing sizes of FRPVC Insulated copper conductor single core cable.2x1.5 sqmm +1x1.5 sqmm earth wire. |
| 71 | 2x2.5 sqmm 1x2.5 sqmm earthwire. |
| 72 | 4x2.5 sqmm+4x2.5sqmm earthwire. |
| 73 | 4x10 sqmm +2x6 sqmm earthwire |
| 74 | Supplying and drawing coaxial TV cable RG-6 Grade 0.7mm solid copper conductor PE insulated shielded with tinned copper braid and protected with PVC. |
| 75 | S/F of following sizes of PVC conduit alongwith the accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required . 20 mm PVC coduit. |
| 76 | 25 mm PVC coduit. |
| 77 | Suppling and fixing following moduler type switch / socket on the existingswitch box / cover including connection etc. as reqd.5/6 amps switch |
| 78 | 15/16 amp oneway switch |
| 79 | 5/6 amps 3 pin socket outlet |
| 80 | 5/16 amps 6 pin socket outlet |
| 81 | TV antennaspcket outlet |
| 82 | S/F Moluler type electronic fan regulator |
| 83 | S/F moduler type blanking plate. |
| 84 | 1 or 2 module (78mmx78mmx45mm) for telephone TV outlet. |
| 85 | 4/5 module(78mmx140mmx50mm) |
| 86 | 6 module(78mmx205mmx50mm) |
| 87 | S/F 2 pin 5 amp ceilling rose on the existing junctionbox etc. |
| 88 | s/f brass batten angle holder including connection etc. |
| 89 | s/f Ding doung sound call bell single phase 230 volt. |
| 90 | Installation testing and commissioning of ceilling fan including wiring the down rods of standards 1.50sqmm frpvc included copper conductor etc. |
| 91 | Installation of exhaust fan upto 450mm sweep in existing opening. |
| 92 | Supplying and fixing 20amp 240v SPN industrial type socket outlet , with 2 pole and earth metal enclosed plug top alongwith 20amps, G- series, SP MCB ,in sheet steel enclosure , on surface or in recess, with chained metal cover for the socket , outlet , and complete with connections , testing and commissioning etc . as requried . (2.18) |
| 93 | Supplying and fixing following ways horizontal type three pole neutral sheet steel MCB distribution board 415 v do…do… as per E/I.8 way (4+24)double door horizontal type. |
| 94 | 6/32 amp single pole |
| 95 | 40 amp TPN |
| 96 | s/f single pole blanketing plate in existing MCB DB |
| 97 | Supplying and fixing following rating double pole 240 v RCCB etc as required. 40 amp |
| 98 | Earthing with G.I. earth plate 600mmx600mm x6mm tick including accessories and providing masonary encloser with cover plate. |
| 99 | P/F 25mmx5 mm GI strip on surface etc |
| 100 | P/F 6 SWG dia GI wire on surface or in racess for loop earthing along with existing surface cable as required. |
| 101 | Supplying of XLPE insulated PVC sheated heavy duty armoured electrical cables with aluminium conductor 1100 v.4 core 16 sqmm |
| 102 | Supplying and drawing of UTP 4 pair Cat 6 lan cable in the existing surface PVC conduit as required. 1 run of cable |
| 103 | Laying of one number PVC insulated and PVC sheated /XLPE power cable of 1.1 kv grade of following size and direct in ground excavation etc as required etcupto 35 sqmm |
| 104 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC 1.1 kv grade as required.4x16 sqmm |
| 105 | SITC of following rating recess surface mounted LED round/square stape down light etc.18/20 w Led Round down light |
| 106 | Bulk head fitting with 9/10 watt LED |
| 107 | SITC of following rating surface monted LED tube lighting fitting suitable for 230 v 50 H single phase supply etc.10/12 W LEDTube light |
| 108 | 20/22 W LED Tube light |
| 109 | SITC of 300 mm (12\")Exhaust fan for single phase 230 v 50 HZ. |
| 110 | Supply installation and testing and commissioning of following size fan blade etc as required.1200 mm (48\")BLDC 5 star rating 32 W ceilling fan. |
| 111 | Supplying, fitting and fixing viterous white glazed earthen ware I.W.C. of parry Hindustan or any other I.S.S. approved make with 100mm H.C.I. \"p\" trap 15 litres C.I. pull and let go flushing cistern of names or other I.S.S. equivalent make, complete with all fittings, C.I. or C.C. brackets 32mm alkathene/P.V.C. telescopic flush, pipe about 2M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pair of viterous white glazed earthenware footrest to be fixed in floor 15mm C.I. body brass spindle stop cock of weight not less than 50grms, 15mm P.V.C. connection pipe 450mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and dirction of E/I.580mm long - With 12.5 liter low level PVC cistern(A) 580 mm long (C)with 10 ltr low level PVC cistern |
| 112 | Supplying and fixing 40 mm high white vitreous glazed(European type W.C. pan) withp trap seat and lid, 15 litre low level white P.V.C. flushing cistern with manually controlled devicde (handle lever), conforming to IS:7231, parryware/Hindware/with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.(b) with 10 litre Pvc citern |
| 113 | white vitreous china wash basin size 550x400 mm with a pair of 15 mm Cp brass pillar tape. |
| 114 | P/F ptmt bottle trap for wash basin and sink bottle trap 31 mm single piece moulded with hieght of 270 mm etc |
| 115 | P/F PTMT Liquid soap container 109 mm wide 125mm Hand 112 mm distance from wall of standard shape and size etc. |
| 116 | Providing and fixing c.p. towel ring trapezoidal shape 215 mm long, 200 mm wide with a minimum distance of 37 mm from wall face with concealed fitting arangement of approved quality colour and makeweighing not less than 88 gms. |
| 117 | Providing and fixing C.P. brass bib cock of approved conforming to IS 8931 |
| 118 | Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS 8931 15mm nominal bore, approved brand C.P. fittings. 15 mm nominal bore |
| 119 | C.P. brass |
| 120 | 75 mm diameter |
| 121 | 76 mm diameter |
| 122 | 110mm |
| 123 | single tee with 110x110x110 mm |
| 124 | bend 87.5 |
| 125 | shoe plain |
| 126 | P/F unplastcised PVC pipe clips of approved design to unplastcised -PVC rain water pipe by means of 50x50x50mm hard wood plugs etc.75 mm diameter |
| 127 | 110 mm dia |
| 128 | P/F CPVC pipes having thermal stability for hot and cold water supply including all CPvC plain and brass thread fittings etc.20mm nominal OD pipes |
| 129 | 25mm nominal OD pipes |
| 130 | 32mm nominal OD pipes |
| 131 | 40mm nominal OD pipes |
| 132 | 50mm nominal OD pipes |
| 133 | P/F CPVC pipes having thermal stability for hot and cold water supply including all CPvC plain and brass thread fittings etc.15mm nominal OD pipes |
| 134 | 20mm nominal OD pipes |
| 135 | 25mm nominal OD pipes |
| 136 | 32mm nominal OD pipes |
| 137 | Providing and placing on terrace (at all floor levels) polyethylene waterstoragetank,ISI:12701marked,withcoverandsuitablelocking arrangement and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank. |
| 138 | EARTH WORK INEXCAVATION IN FOUNDATION Trenches in ordinary soil (vide classification of soil item -A) and disposal of excavated earth as obtained to a distance up to 50 M including all lift, leveling ramming the foundation trenches, removing roots of tree shrubs all complete as per approved design, building specification and direction of E/I. |
| 139 | Providing coarse cleanSAND IN FILLING in foundation trenches or in plinth including ramming and watering in layer not exceeding 150 mm thick with all leads and 1.5 M lifts including cost of all materials, labours, royalty and taxes all complete as per building specification and direction of Engineer In charge (Mode of measurement compacted volume) |
| 140 | Providing designation 75A brick work in C.M. (1:6) in foundation & plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm. thick mortar joints, cost of screening materials raking out joints to 15mm depth , curing, taxes & royalty all complete as per building specification & direction of E/I. |
| 141 | Providing and laying in position specified grade or RCC excluding the the cost of centering shuttering etc upto plinth. |
| 142 | (1:1.5:3) graded stone aggregate 20 mm nominal size. |
| 143 | Providing reinforcement concrete work in beam suspended floors roofs having slope upto 15 degree landing balcony shelves do.. Do.. As per E/I. (Rcc M20) |
| 144 | Providing Tor steelreinforcement as per approved design & drawing.10mm dia |
| 145 | Providing designation 75-ABRICK FLAT SOLING joints filled with local sand including cost of watering, taxes and royalty all complete as per building specification and direction of Engineer In charge |
| 146 | Providing 12mm cement Plaster (1:3) with clean coarse sand of F.M.1.5 with floating coat of neat cementin DADO including rounding of junctions with floor, curing, taxes and royalty all complete as per building specification and direction of E / I. |
| 147 | Supplying and fixing C. I. Cover without frame for MANHOLE 560MM DIA C.I. COVER (HEAVY DUTY) |
| 148 | Carriage of materials:Bricks lead |
| 149 | Sand lead |
| 150 | stone chips lead |
| 151 | cement |
| 152 | steel |
| 153 | Cost of drilling 200mm x165mmx125 mtr dia Deep borewell : Supplying all materials labour, tools & equipments for driling 200/150 dia borewell in any kind of soil/rock by using DTH supper Rig machine and bell hammer technology inclusive of mollisation dermolisation of rig air complete job including of transportation charge up to the site -do-From 0.00 m to 50.00m Below GI |
| 154 | From 51.00 m to 125.00m Below GI |
| 155 | From 126.00 m to 150.00m Below GI |
| 156 | Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.200 mm nominal size dia |
| 157 | development of tube well in accordance with ISto establish maximum rate do…do.. As per E/I. |
| 158 | Supplying and fitting MS Cap over 200 mm dia casing pipe all complete job as per direction of E/I |
| 159 | Supplying and fitting MS clamp all complete job as per direction of E/I |
| 160 | submersible pump 100 mm dia(with bronz impeller upto 20 stage) :- 2.00 H.P. |
| 161 | Supplying fitting and fixing of standard make starter board with arrangement of all necessary including all traxes as per E/I.. |
| 162 | S/F/F 3 core 4 sqmm flat copper cable do..do… as per E/I. |
| 163 | S/F/F lowering 40mm dia G.I. column pipe do..do.. As per E/I. |
| 164 | Goods & Service Tax (G.S.T.) - |
| 165 | Labour Cess - |