Delhi Development Authority-DDA has published Tender For M/O Cycle Market Ph-I And Ii At Jhandewalan.. Submission Date for this Tender is 05-04-2023. Fire Fighting Consumable Tenders in Delhi Delhi. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Running maintenance & operation of fire fighting pump sets fire fighting equipments, storm water pump sets, submersible pump sets & submersible mono block pump set as per detail inventory of isntallation, terms & condition attached. a) The agency shall install Aadhar enabled biometric attendance machine subject to standard guidelines issued by Competent Authority in reference to Corona Pandemic. The agency shall submit the attendance along with labour report for preparation of bill. b) In addition to biometric attendance staff shall mark their attendance in the attendance register. |
2 | Servicing, preventive maintenance &testoing of 100 BHP diesel engine for diesel engine driven pump set and supply & replacement of engine oil, oil filter, air filter, coolant, hose pipe kit, cleaning & calibration of injector i/c connection, testing, commissioning etc. complete as required.at site. |
3 | SITC of the submersible motor pump set of 3 HP, 5 cubemeter/hour, minimum head 70 m inthe existing bore well suitable for operation at 415 volt, 50 Hz,3 phase A.C. supply, i/ctesting, etc. as required etc complete. |
4 | Supply and fixing of 50 mm. dia.G.I. pipe ( B class ) and 50 mm dia. G.I. flange in existing submersible bore well i/ccutting or welding of pipe, bends,nuts, bolts, washer and rubber insersion, testingetc. as required |
5 | Supplyand fixing of size 3C X 4sq. mm. PVC insulated &PVC sheathed submersible flat copper conductor cable including connection, testing etc. as required. |
6 | Repairing of 75 HP DSM 5B kirlosker make centrifugal pump set i/c S/R of following worn out parts i/c dismantling, re-assembling, cartage to and fro, testing on load etc complete as required at site. (i) S/R of shaft- 01 No (ii) S/R of Shaft sleeve- 01 No. (iii) S/R of mechanical sleeve Upper and lower - 01 No (iv) S/R of mechanical sleeve Upper and lower - 01 No. (v) S/R of O ring - 2 set (vi) S/R of gland plate - 1 No. (vii) S/R of neck ring - 2 Nos. (viii) S/R of packing sheet- 2 Nos. (ix) S/R of Shud Nut 12 mm, 16 mm, 20 mm |
7 | Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS780 of following sizes as required |
8 | 250MM |
9 | 200MM |
10 | 150MM |
11 | 100MM |
12 | Providing, installation, testing and commissioning of NON RETURN VALVE cast Iron double flange as per IS/5312 PN 1.6 rating complete with Bronze body &wedge Stainless Steel spindle, Gland packing, Rubber gasket. |
13 | 200MM |
14 | 150MM |
15 | 100MM |
16 | Supply&fixing of4’ long 20 watt LED batten tube light fittings i/c connection, testing etc. as required. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail