Military Engineer Services-MES has published Repair To Flooring, Roof And Periodical Services In Technical Area At Af Stn Ambala Under Ge (Af) Ambala. Submission Date for this Tender is 09-05-2023. Shed Construction Tenders in ambala Haryana. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 06-Apr-2023 | AMENDMENT | Date | 20-04-2023 |
| 2 | 12-Apr-2023 | AMENDMENT | BOQ | 02-05-2023 |
| 3 | 12-Apr-2023 | DATE AMENDMENT | Date | 02-05-2023 |
| 4 | 02-May-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 09-05-2023 |
| Sl. No. | Item Description |
| 1 | Demolition of PCC in ground floor and pavingsnot exceeding 15 cm thick below or above ground level complete all as specified and directed. |
| 2 | M & L for plain Cement concrete 1:4:8 type D2 (using 40mm graded stone agg) as in sub base of floors complete all as specified and directed. |
| 3 | M&L 100mm thick PCC 1:2:4 type B 1 using 20mm graded stone agg as in floor finish even and smooth using extra cement complete all as specified and directed. |
| 4 | Dismantlingof stone slabs and tiles of any description orthickness laid dry or laid dry andpointedin any mortar in floors, aprons etc complete all as specified and directed. |
| 5 | Material and labour for 75 mm thick plain cement concrete type C-2, 1:3:6 ( using 20 mm graded crushed stone aggregate) as in path/pavings/plinth protectionetclaid in bays including finishing the concrete surface even and smooth without using extra cement complete all as specified and directed. |
| 6 | M&L for Sand filling under floors/Pavement or in foundations including watering and consolidation, complete all as specified and directed. |
| 7 | M&L Machine pressed precast concrete interlocking paver block of any shape and size conforming to IS 15658 -2006 of 60 mm thickness, M-35 Gradewith grey cement and nopigment complete all as specified and directed. |
| 8 | M&L Machine pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658 -2006 of 80mm thickness, M-40 Gradewith grey cement and nopigment complete all as specified and directed. |
| 9 | Material and labour PCC 1:2:4 type B-1 (using 20mm graded mechanincally crushed stone aggregate ) as in bonding/locking of edges, paddingof interlocking tiles including weathering and slightly roundedorchamferedon edges and threating including necessary form work complete all as specified and as directed. |
| 10 | Dismantling structural steel work including doors, gates but excluding framed truss etc. completeall as specified and as directed. |
| 11 | S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or inducton but welded tubes conforming to IS 1161-1979 grade St-240 complete all as specified and directed. |
| 12 | Dismantling of plain or AC/GIsheeting any guage , thickness, including Nainital or similar patternfrom roof coveringand wall Cladding complete all as specified and directed. |
| 13 | S&F Pre painted galvalume aluminum zink coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 14 | Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 15 | Material and labourfor one coat of synthetic enamel paint includingpreparation ofold painted steelsurfaces as in walls / roof trusses/purlins/rafters/angle iron posts etc complete all as specified and directed. |
| 16 | Material and labour for preparing surfaces of new or previously untreated surfaces ofsteel or metal works and applying two coats of synthetic enamel paintover a coat of red oxide primer over 10cm in width or girth complete all as specified and directed. |
| 17 | Demolition of brick work built in CM or cement lime mortar complete all as specified and directed. |
| 18 | M&L for bricks work built in CM mortar 1:6 with sub class "B" bricks straight or curved on plan exc 6m mean radius complete all as specified and directed. |
| 19 | All as per Srl item No 18.00 here-in-before but except bricks, complete all as specified and directed. |
| 20 | Material and labour for brick work with sub class B bricks of old size, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 as in manhole/septic tank /soak well complete all as specified and directed. |
| 21 | Material and labour for rendering 15mm thick on any faces of brick wall or concrete surface in CM 1:4 mixed with WPC @ 3% by weight of cement finished fair and even without using extra cement complete all as directed. Note : WPC shall be measured and paid separetely. |
| 22 | Supply only integral water proofing compound, complete all as specified and directed. |
| 23 | Taking down cement plaster on brick wall including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed. |
| 24 | M&L for rendering 15mm thick in cement mortar 1:4 on brick work or concrete surfaces even & fair complete all as speicifed and directed. |
| 25 | M&L for rough cast plaster including 15mm thick rendering in CM 1:3 on brick wall or concrete concrete surfaces complete all as specified in SSR Part - I clause 14.22 complete all as specified and directed. Note : Rough cast finish to be as below :- After applying the under coat of cement mortar 1:3 and while it is still in plastic state the rough cast mixture consisting of crushed stone or fine gravel agg (which is generally of size between 6 to 12mm depending on the texture required ) mixed with course sand and cement in the ratio of 1 : 1 : 1 shallbe applied and finished even. The mixof cement and sand shall be made slightly wetter than normal for rendering to ensure that larger aggregates are thoroughly covered. |
| 26 | M & L preparation of surfaces ofnewly/old RCC/stone/concrete/brick walls and applying two coats of exterior emulsion paint in camouflaging pattern of any shape and of any pattern over & including a coat of alkali resistant primer complete all as specified and directed. |
| 27 | M&L for PCC 1:2:4 type B1 (using 20mm graded aggregate) as in coping & the like including weathering slightly rounded or chamfered angles & throatingetc including necessary form work complete all as specified and drected. |
| 28 | M&Lfor plain cementconcrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in beds of surfacechannels & drains including smooth finish completeall as specified and directed. |
| 29 | Extra for forming fair finished drain or channel 30cm inner girth in cement concrete including forms, moulds etc complete all as specified and directed. |
| 30 | S & F in repair for providing precast cement concrete 1:2:4 type B0 (using 12.5mm graded agg) as inlouvres and jallies 25mm thick (measured solid)including all mouldings but excluding frame and set in CM 1:4complete all as specified and directed. |
| 31 | Demolition of reinforced concrete of any description and in any postion not otherwise specifically provided for, complete all as specified and directed. |
| 32 | Material and labour for providing precast RCC 1:1.5:3 type A-1 using 20mm graded mechanically crushed stone agg as in cover slab for man holes, drains , soak well etc and similar articles etc, set in CM 1:4 with plain faces including chamfered weathering throating etc incl necessary form work complete all as specified and directed. |
| 33 | Supply and fix mild steel deformed bars or TMT bars 10mm dia and overcut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 34 | All as per item No 33.00 here-in-before but6 to8mm dia, complete all as specified and directed. |
| 35 | Supply and fixing in repairs PVC (SWR) 110mm bore as soil waste and vent pipe single socketed in any length with rubber ring joints fixed to walls complete all as speicifed and directed. |
| 36 | All as per srl item No 35.00 here-in-before but 75mm bore complete all as specified and as directed |
| 37 | Supply and fxingPVC (SWR) bendsany radius for 110mm pipe complete all as specified and as directed. |
| 38 | All as per item No. 37.00 here-in-before but for 75mm pipe complete all as specified and as directed. |
| 39 | M&L for complete removal of existingtreatment from plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of 3mm putty complete all as specified and directed. |
| 40 | Material and labour for applying two coats of white lime wash on wall at any height in Bldgs / Blast Pensincluding preparation of old decorated wall surfaces by brooming down or scraping down and filling all holes etc complete all as specified and directed by Engr-in-Charge |
| 41 | All as per item No 40.00 here-in-before but as on ceilling at any heightin Bldgs / Blast Pens complete all as speicifed and directed. |
| 42 | M&L for applying one coat of distemper oil emulsion on old decorated surfaces of walls including preparation of surfaces by scraping down , complete all as specified and directed. |
| 43 | Rendring 5mm thick in CM1:3 on fair faces of brick work or concrete surfaces finish even and smooth without using extra cement on ceiling surface complete all as specified and directed by engr-in-charge. |
| 44 | M&L Prepration ofnew plastered surface of any description and applying three coats ofwhite wash on ceilingcomplete all as specified and directed by Engr-in-charge. |
| 45 | M&L Prepration ofnewlyplastered surface of any description and applying two coats of oil emulstion distemper over a coat of 3mm thick Birla/JK wall care putty complete all as pecified and directed by Engr-in-charge. |
| 46 | Material and labourfor one coat of synthetic enamel paint on old painted wooden surfaces of any description exc 10cm width or girth including preparation of surfaces etc complete all as specified and directed. |
| 47 | Material and labour for dismantlingbrick tiles or terracing tiles single layer on roof, cleaning and stacking the serviceable tiles for reuse, offering credit for unserviceable tiles and removingrubbish to a distance n. exc 250 Mtr complete all as speicifed and directed. |
| 48 | Material and labour for demolition of mud in roof of any thickness including plastering and leeping (Whether full thickness removed or only partthereof) complete all as speicifed and directed. |
| 49 | Material and labour forroughingsurfacesof roof after removal of mudphuska completely and applying cement slurry with3.00 Kg /Sqmcomplete all as specified and directed. |
| 50 | Material and labour for water proofing treatment over roof at any height consisting of evenly applied primer coat @ 0.30 Ltr/Sqm on surfaces, overlaps, joints etc and a layer of APP basedpolymeric membrane 3mm thick minimum weighing 3Kg/Sqm duly sealed at over laps joints with flame(completely by torch application) all as per manufacturer instruction overapplying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm including cleaning surfaces and incl 15mm thick screed bed of CM 1:4 mixed with water proofing compound @ 2% by weight of cement complete all as specified and directed. Note : Water proofing compound shall be measured and paid separately. |
| 51 | Material and labour for 40mm thick brick tiles laid and bedded in cement mortar 1:6,15mm thickand joints groutedflush in cement mortar 1:3 mixed with 5% of crude oil by weight of cement completeall as specified and as directed. |
| 52 | All asper item No.51.00 here-in-before but except tiles complete all as speicifed and directed. |
| 53 | M&L for wire brushingand cleaning top surfaces of tiles , lime terracing or cement concrete incl flashing and junctions of parapet etc and surface painting with a layer of blown bitumenof any penetrationapplied hot @ 1.7 Kg/Sqm blinded with grit or pea size gravel @ 0.006 cum per sqm and lightly tampered, complete all as speicifed and directed. |
| 54 | Demoliton of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets ) any thickness, including cover fillets, complete all as speicifed and directed. |
| 55 | S&F powder coated GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20mm and 30mm and web of 27mm fixedto surrounding wall using nylon sleeves at appx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section(not exc 1.2 mtr length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clipsacross the intermediate channel at 457mmcentre to centre including hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means ceiling cleats made out of GI flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified including 9 to 10mm thick ceiling tiles/board for insulation and accoustic purpose of size 600 x 600mm decorative type with silver foil coating on back side complete all as specified and directed. Ceiling board should of make : Saint Gobian/Armstrong/Gysboard/Hilux/Kingston for insulation and accoustic purpose fixed with staples with on snap grid and 4mm dia GI wire with nuts, bolts, adjustable arrangement and washers etc complete all as specified and directed. |
| 56 | M & L preparation of surfaces ofnewly/old RCC/stone/concrete/brick walls and applying two coats of exterior emulsion paint in camouflaging pattern of any shape and of any pattern over & including a coat of alkali resistant primer complete all as specified and directed. |
| 57 | S&F anodised aluminium window shutters with chowkhat made out hollow aluminium section suitable for aluminium shutter sliding and glazing with 5.00mm thick glass fixed with glazing clips, rubber beading and aluminium beading etc complete all as specified and as directed. Make :- Anodised aluminium section : HINDALCO/JINDAL/INDALCO Glass: SAINT GOBIN/MODI GUARD/TATA CHOWKHATS SIZE : 100 X 44 X 1.60 MM THICK SHUTTERS MEMBER SIZE: 100 X 44 X 1.60 MM THICK |
| 58 | Taking down Chowkats With shutters(without taking of shutters from the frames) or frames not exceeding 1.5 Sqm incl dismantling of brick work for hold fastcomplete all as specified and as directed. |
| 59 | Taking down Chowkats or frames with shutters(without taking of shutters from the frames) exceeding 1.5 Sqm but not exc 4 sqm incl dismantling of brick work for hold fastcomplete all as specified and as directed. |
| 60 | S&F anodised aluminium door made out hollow aluminium section as mentioned below. Each door having 02 Nos disk or D type handleof 200 mm long , two Nos aluminium tower bolts of 200 size , one No mortice lock of six leverswith key in duplicate regulated by double action hydrolic floor door spring (Make - Sandhu/Titz) shutters to be partly glazedwith 5mm thick tinted glass and partly panelled with 12mm thick prelaminated particle board fixed with glazing clips, rubber beading/gasketanodised aluminium beading screws etc complete all as specified and as directed. Make :- Anodised aluminium section : HINDALCO/JINDAL/INDALCO Glass: SAINT GOBIN/MODI GUARD/TATA CHOWKHATS SIZE : 100 X 44 X 1.60 MM THICK SHUTTERS VERTICLE STYLE : 100 X 44 X 1.60MM SHUTTERS LOCK RAIL : 150 X 44 X 1.60MM SHUTTERS BOTTOMRAIL: 200 X 44 X 1.60MM |
| 61 | S&F anodised aluminium partition wallor fixed type window/ventilator made out of aluminium anodised standard hollow section100 x 44 x 1.60mm thick snap fit beading standard rubber gasket 5.5mm thick glass or 12mm thick prelaminated particle board interior grade prelaminated one side with decorative choice laminates and other side balancing light grey lamination etc complete all as specified and as directed. |
| 62 | Hacking out old broken glass of any thickness size , quality or description from wooden/steel frames etc complete all as specified and directed. |
| 63 | S&F4mm thick sheet glass ordinary quality of glazing with oil putty or wooden beads in square not exc 0.5 sqm each panes complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
