|
| 1 | PART - A |
| 2 | Non-Comprehensive Annual Maintenance Contract for 04 nos. of HT Breakers & 02 nos. of Transformers installed at INFLIBNET Centre for 01 Year |
| 3 | TOTAL FOR PART-A |
| 4 | PART - B |
| 5 | Comprehensive Annual Maintenance Contract for 06 nos. of LT Panels, 02 nos. of APFC Panel and 02 nos. of Isolator Panels installed at INFLIBNET Centre for 01 Year |
| 6 | TOTAL FOR PART-B |
| 7 | Part - C (Annual Rate Contract Including Supply Installation, Testing & Commissioning for Certain following items, which will be applicable as and when required during the contract period) |
| 8 | Transformer Oil Filtration |
| 9 | Transformer Oil Topping (New) |
| 10 | Replace Silica Gel |
| 11 | Relay testing charge |
| 12 | Charges for Cable Fault Locator Machine |
| 13 | 95-120 Sq.mm.(Aluminum) HT 11 KV Cable Fault repair charges |
| 14 | 95-120 Sq.mm.(Aluminum) HT 11 KV Cable Laying Charges (With Digging ) |
| 15 | 95-120 Sq.mm.(Aluminum) HT 11 KV Cable Laying Charges (Without Digging ) |
| 16 | 8-16 Sq.mm.(AL) LT Cable Fault repair charges |
| 17 | 8-16 Sq.mm.(Aluminum) LT Cable Laying Charges (With Digging ) |
| 18 | 8-16 Sq.mm.(Aluminum) LT Cable Cable Laying Charges (Without Digging ) |
| 19 | 25-50 Sq.mm.(AL) LT Cable Fault repair charges |
| 20 | 25-50 Sq.mm.(Aluminum) LT Cable Laying Charges (With Digging ) |
| 21 | 25-50 Sq.mm.(Aluminum) LT Cable Laying Charges (Without Digging ) |
| 22 | 70-95 Sq.mm.(AL)LT Cable Fault repair charges |
| 23 | 70-95 Sq.mm.(Aluminum) LT Cable Laying Charges (With Digging ) |
| 24 | 70-95 Sq.mm.(Aluminum) LT Cable Laying Charges (Without Digging ) |
| 25 | 120-185 Sq.mm.(AL) LT Cable Fault repair charges |
| 26 | 120-185 Sq.mm.(Aluminum) LT Cable Laying Charges (With Digging ) |
| 27 | 120-185 Sq.mm.(Aluminum) LT Cable Laying Charges (Without Digging ) |
| 28 | 240-400 Sq.mm.(AL) LT Cable Fault repair charges |
| 29 | 240-400 Sq.mm.(Aluminum) LT Cable Laying Charges (With Digging ) |
| 30 | 240-400 Sq.mm.(Aluminum) LT Cable Laying Charges (Without Digging ) |
| 31 | Technician Stand by charge during any event/function |
| 32 | VI Support Insulators – CT CHEMBER |
| 33 | VI Support Insulators – BUSBAR CHEMBER |
| 34 | Shutter assembly of VCB Breaker panel as per CGL standard |
| 35 | Power pack dual 230/110 V AC to 110 V DC |
| 36 | TNC ( Trip Neutral Close ) switch in breaker panel |
| 37 | LED Indicator lamp as per colour code and specification |
| 38 | Heater & Thermostat in Busbar chamber and Termination chamber |
| 39 | Jaw contact in 11 KV breaker as per CGL standard (06 nos. per Breaker) |
| 40 | HT Breaker’s Heater’s thermostat |
| 41 | Jaw Contact Insulator 11KV VCB HT Panel (As per CGL Standard) |
| 42 | Tie rode 11KV VCB11KV VCB HT Panel (As per CGL Standard) |
| 43 | VACUUM INTERRUPTER (CG Make)12000 VCURRENT 630 A FREQUENCY-50 Hz , NO.OF POLES 3 BREAKING CAPACITY 26.3kA , MAKING CAPACITY 67kAp , SHORT TIME CURRENT 26.3Ka FOR , DC. COMPONENT 50% BIL , SR.NO 58238VG TYPE: V/L 33379 M3+DISP.NO V-61454 |
| 44 | 11kV dry type potential transformer 11000 V/110 V DC (As per CGL Standard) |
| 45 | Closing Coil 110 V DC (As per CGL Standard) |
| 46 | CT Coating |
| 47 | PT HT Bushing Coating |
| 48 | TOTAL FOR PART-C |
| 49 | Total of Partwise (Part-A to Part-C) Rates as per the Evaluation Criteria considered by the Centre for Financial Evaluation |
| 50 | 40% of PART - A |
| 51 | 40% ofPART - B |
| 52 | 20% ofPART - C |
