|
| 1 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : |
| 2 | All kinds of soil |
| 3 | Pipes, cables etc, not exceeding 80 mm dia. |
| 4 | Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 6 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 7 | 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 8 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form for |
| 10 | Suspended floors, roofs, landings, balconies and access platform |
| 11 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. |
| 12 | Cold twisted bars |
| 13 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: |
| 14 | Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 15 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : |
| 16 | Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 17 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. |
| 18 | Cement mortar 1:3 (1 cement :3 coarse sand) |
| 19 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. |
| 20 | Granite stone slab of colour black, Cherry/Ruby red |
| 21 | Area of slab upto 0.50 sqm |
| 22 | Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. |
| 23 | Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: |
| 24 | 125x75x4 mm |
| 25 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : |
| 26 | 300x16 mm |
| 27 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 28 | 200x10 mm |
| 29 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 30 | 125 mm |
| 31 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: |
| 32 | Profile B |
| 33 | Fixing with adjustable lugs with split end tail to each jamb |
| 34 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. |
| 35 | Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent |
| 36 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification. |
| 37 | Two or more coats on new work |
| 38 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 39 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 40 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 41 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 42 | Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) |
| 43 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : |
| 44 | Of area 3 sq. metres and below |
| 45 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. |
| 46 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 47 | Providing and fixing white vitreous china pedestal type water closet(European type) with seat and lid, 10 litre low level white vitreouschina flushing cistern & C.P. flush bend with fittings & C.I. brackets,40 mm flush bend, overflow arrangement with specials of standardmake and mosquito proof coupling of approved municipal designcomplete, including painting of fittings and brackets, cutting andmaking good the walls and floors wherever required : |
| 48 | W.C. pan with ISI marked white solid plastic seat and lid |
| 49 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto1 metre long with S.S. triangular plate to Eureopean type W.C. ofquality and make as approved by Engineer - in - charge. |
| 50 | Providing and fixing P.V.C. waste pipe for sink or wash basin includingP.V.C. waste fittings complete. |
| 51 | Flexible pipe |
| 52 | 32 mm dia |
| 53 | Providing and fixing soil, waste and vent pipes : |
| 54 | 100 mm dia |
| 55 | Centrifugally cast (spun) iron socket &spigot (S&S) pipe as per IS: 3989 |
| 56 | 75 mm diameter : |
| 57 | Centrifugally cast (spun) iron socketed pipeas per IS: 3989 |
| 58 | Providing and fixing heel rest sanitary bend |
| 59 | 100 mm dia |
| 60 | Sand cast iron S&S as per IS - 3989 |
| 61 | Providing and fixing collar : |
| 62 | 100 mm |
| 63 | Sand cast iron S&S as per IS - 3989 |
| 64 | 75 mm |
| 65 | Sand cast iron S&S as per IS - 3989 |
| 66 | Providing lead caulked joints to sand cast iron/centrifugally cast(spun) iron pipes and fittings of diameter : |
| 67 | 100 mm |
| 68 | 75 mm |
| 69 | Providing and fixing trap of self cleansing design with screwed downor hinged grating with or without vent arm complete, including cost ofcutting and making good the walls and floors : |
| 70 | 100 mm inlet and 75 mm outlet |
| 71 | Sand cast iron S&S as per IS - 3989 |
| 72 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall |
| 73 | 20 mm dia nominal bore |
| 74 | 25 mm dia nominal bore |
| 75 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : |
| 76 | 15 mm dia nominal bore |
| 77 | 20 mm dia nominal bore |
| 78 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 79 | 20 mm nominal bore |
| 80 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 81 | 45 cm length |
| 82 | 15 mm nominal bore |
| 83 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work): |
| 84 | 15 mm nominal bore |
| 85 | 20 mm nominal bore |
| 86 | 25 mm nominal bore |
| 87 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : |
| 88 | 15 mm nominal bore |
| 89 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 |
| 90 | 15mm nominal bore |
| 91 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. |
| 92 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. |
| 93 | Cutting holes up to 30x30 cm in walls including making good the same: |
| 94 | With common burnt clay F.P.S. (non modular) bricks |
| 95 | Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. |
| 96 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: |
| 97 | 100x100 mm size P type |
| 98 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 99 | Providing and fixing Ist quality ceramic glazed wall tiles onforming to IS:15622 (thickness to be specified by the manufacturer) , of approved make,in all colours, shades except burgundy, bottle green, black of any size asapproved by Engineer-in-Charge, in skirting, risers of steps and dados,over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) , including pointingin white cement mixed with pigment of matching shade complete |
| 100 | Providing and fixing ISI marked water proof 30 mm thick flush door shutter of pine frame seasoned and treated with seasoned pine filler and 2.5mm thick laminated on both side with phenol formaldehyde resin conforming to IS:848 : complete in all respect. |
| 101 | Dismantling of old glazed wall tiles including removal of malba from site complete. |
| 102 | Providing and fixing 5mm thick looking glass with 40mm fancy wooden/PVC frame with thick hard board ground fixed with wooden cleats withscrews and washers complete in all respect to the entire satisfaction |
| 103 | Providing and fixing of under Counter Oval Shape W.H.B. Make M-Cera Code No. 1016 white colour including the cost 4\" long C.P. waste one PVC pillar tap complete in all respect. Meke Cera/Hindware NSR |
| 104 | Providing and fixing Pressmatic Pillar Cock Auto Closing System complete in all respect Jaquar Make PRS-031 to the entire satisfaction of EIC. |
| 105 | Providing and fixing of C.P. cup heavy duty as per approved make. |
| 106 | Providing and fixing of S.S 304 grab rail of 32mm dia heavy duty pipe and clamp complete in all resepcst to the entire s atisfaction of EIC |
| 107 | Providing and fixing of curb with CC 1:2:4pvc pipe4\" 6 kg /sqcm for size 1\"x1\"x1\"6\" complete in all respect. |
| 108 | HCI Scrap / GI Scrap@ Rs.30 per kg PVC Scrap @ Rs. 20 per kgOld wooden doors & chowkhats @ Rs 5/- kgOld door fittings scrap (e.g, hinges, tower bolts, handles, stoppers, etc) @ Rs.30/- kgPig lead Scrap @ Rs. 120 per kgBrass Scrap @ Rs. 300 per kgOld Brick @ Rs.4/- each |
