Zilla Parishad-ZP has published Tender For Construction Of I.C.D.S. Centre At Baranandanpur Jagadishtala 67 Under Khanakul-Ii Development Block.. Submission Date for this Tender is 06-04-2023. Building Work Tenders in Hooghly West Bengal. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation trenches or drains, in all sorts of soil ( including mixed soil but excluding laterite or sandandtone) including removing, spreading or stacking the spoils within a lead of 75 m. as direction. The item includes necessar trimming the sides of trenches, leveling, dressing and ramming the bottom, bailling out water as required complete. |
| 2 | Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as direction and consolidating same by thorough saturation with water ramming complete |
| 3 | with earth obtained from excavation of foundation |
| 4 | Cement concrete with graded stone ballast (40 mm size excluding shuttering)In ground floor(A) [Pakur Variety]1:3:6 Proportion |
| 5 | Ordinary Cement Concrete M-20 (1:1.5:3) With graded Stone chips 20 mm. down excluding shuttering and reinforcement |
| 6 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of |
| 7 | 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge. |
| 8 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, |
| 9 | brick work with 1st class bricks in cement morter (1;6) |
| 10 | In superstructure, ground floor |
| 11 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor. |
| 12 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, |
| 13 | 15 mm thick plaster |
| 14 | 10 mm thick plaster |
| 15 | Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. |
| 16 | Panel (made of single plank) of door and window shutters to design as directed: In Ground Floor (Payment to be made on area of exposed new work). (In case of non-supply of single plank penal rate of reduction to a maximum of 30% |
| 17 | Supplying, Fitting & Fixing Factory made prelaminated P.V.C. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm Prelaminated PVC sheet miter cut at two corners and joined with two nos of 1.5 mm long brackets of 15 mm x15 mm M.S. square tube. |
| 18 | PVC Door Shutter-30 mm thick: Supplying fitting and fixing P.V.C. door shutter of approved quality & shade in position, the style & rail of the P.V.C. door shutter will be made of rigid P.V.C. multicavity hollow chamber of 59 mm x30 mm section with 2.0 mm (+/-0.2 mm) wall thickness.Horizontal & vertical section shall be fixed to each other by self tapping screws and 1 solid polymeric or M.S. |
| 19 | M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. Above 16 Kg /Sq. m. |
| 20 | Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately) (a) 40mm X 6mm, 250mm Length |
| 21 | Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. (viii) 100mm. X 75mm. X 3.50mm |
| 22 | Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 |
| 23 | Anodised aluminium Aldrop / Sliding bolts of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 2681/66) |
| 24 | Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed |
| 25 | Glazed shutters of doors, windows, fan light, clerestory windows etc. as per design (with ordinary glass of 7.4kg./sq.m. 3mm. Thick) fitted with putty bed and teak wood bead and nails including fitting and fixing shutter in position but |
| 26 | Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, |
| 27 | 110 mm. dia |
| 28 | 110 mm dia |
| 29 | Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc |
| 30 | Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 31 | .Painting with best quality synthetic enamel paints of approved make and brand including smoothening surface by sand papering etc. |
| 32 | two coats with any shade except white |
| 33 | white washing including cleaning and smoothening surface |
| 34 | Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer"s specification. In Ground floor: |
| 35 | Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover(heavy type)of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab |
| 36 | Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement plastering (1:4) to inside face upto the depth of cement brick work, 15mm thick cement plaster (1:4) |
| 37 | Galvaised Iron pipe outlet for water with bevelled end at outlet supplies |
| 38 | Supplying, fitting and fixing UPVC pipes A-Type and fittings confirming to IS: 13592-1992 with all necessary clamps, nails including making holes in walls, floor etc. and cutting trenches in any soilthrough masonry concrete structure |
| 39 | shoe 110 mm dia |
| 40 | shoe 110 mm dia |
| 41 | Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer (a) 500 litre capacity each |
| 42 | Labour for hoisting plastic water storge tank |
| 43 | Labour for punching hole in plastic water storge tank |
| 44 | Polythene Bid Cock / Stop Cock with plastic inlet ( EMCO / ATLAS or equivalent ) i) 15mm |
| 45 | Supplying, fitting and fixing PVC pipes of approved make of (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, r |
| 46 | 25 mm |
| 47 | 32 mm |
| 48 | Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding "P" or "S" trap (excluding cost of concrete for fixing). |
| 49 | Supplying, fitting & fixing Cast iron soil pipe only conforming to I.S. 3989 / 1970 and I.S. 1729/1964 with bobbins, nails etc. including making holes in the wall, floor etc. and cutting trenches etc. in any floor through masonry concrete, i |
| 50 | Supplying,fitting and fixing cast iron "P" or "S" trap conformimg to I.S. 3989 / 1970 and 1729 / 1964 including lead caulked joints and painting two coats to the exposed surface. (Painting to be paid seperately |
| 51 | Buster pump for uplifting water from hand tubewell to over head storage tank |
| 52 | supplying, fitting and fixing chech valve |
| 53 | supplying fitting and fixing gunmetal wheel valve of approved brand and make tested |
| 54 | Collapsible gate with 40 mm x 40 mmx 6 mm tee as top and bottom guide rail, 20 mmx 10mmx 2mm vertical channels 100mm |
| 55 | Labour for boring tube well of require dia by water system |
| 56 | 100 mm dia boring etc. |
| 57 | supplying, fitting and fixing steel cutter |
| 58 | supplying, fitting and fixing plug of approved make |
| 59 | supplying pvc strainer of approved make |
| 60 | Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). (A) |
| 61 | 50 mm |
| 62 | 100 mm dia boring etc. |
| 63 | reducing socket |
| 64 | Washing and developing tube well with air compressor pump and engine for 8 (eight) hours continuous pumping per day with necessary arrangements for testing the yield in gallons per hour with "V" |
| 65 | Submerssible Pump (Kiloskar 1.0 HP. 0.75 kw, 15th Stage) with 40 m Wiring cable for Electric Connection (1.5 mm2) |
| 66 | Gi flange with 4 nuts |
| 67 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, |
| 68 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, |
| 69 | Wiring in 1.1 KV grade single core stranded "FR" PVC insulated & unsheathed copper wire (Brand approved by EIC) of following sizes in 25mm PVC casing-capping (Precision make) incl. necy. PVC clips, fittings etc2 x 56/0.3 (4 sqmm) + 1 x 22/0.3 (1.5 sqmm) |
| 70 | Distribution Wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded "FR" PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded "FR" PVC insulated & unsheathed copper wire for ECC, incl. |
| 71 | Supplying and fixing of LED 10 Watt. lamp of required watt with bakelite holder on existing sheet metal (MS) board embeded in the wall with bakelite / perspex (wall match colour) top cover (3mm thick) flushed in wall incl. mending good damags to original finish. |
| 72 | Add 18% GST as per Govt Norms |
| 73 | Add 1 % Cess |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
