|
| 1 | Taking out Mirzapur or glazed porcelain tiles carefully by chiselling from walls or floor including stacking serviceable materials as directed |
| 2 | Polishing only of old marble or terrazo work with oxalic acid powder using 33 gms/ sq.m. by manual labour / machine where necessary. Page 77,it -7 |
| 3 | Removal of rubbish eart etc. from the working sites and disposal of the same beyond the compound in conformity with the Municipal Ciorporation Rules for such disposal,loading into truck & cleaning the site in all respect as per direction. |
| 4 | Supplying, fitting and fixing boiling water proof block board conforming to IS:1659-1990 conforming to IS:848-1974 of approved make and brand, fitted and fixed as per design as per direction of Engineer-in-charge. [Excluding the cost of supporting frame work and teak wood batten/Lipping]. In Ground Floor, page - 173, it- 04 (iii) 25mm |
| 5 | Priming one coat on timber , plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. A) Ground Floor |
| 6 | (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (a) On steel surface : With super gloss (hi-gloss) - (iv) Two coats (with any shade except white) A) Ground Floor |
| 7 | Supplying, Fitting & Fixing 30 mm thick thick both side prelaminated Double Leaf Factory made solid Panel PVC Door Shutter consisting of outer frame made out of M.S. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, M.S. frame shall have cost of steel primers of approved make and manufacture, M.S. frame covered with 5 mm th. ......complete excluding all necessary hardwares as per direction of Engineer-in-Charge.In ground floor. [ Ref. PWD Sch,P.No.128 , It.No. 18 ]. |
| 8 | Supplying & laying true to line and level vitrified tiles of approved brand (size not less than 600mmx600mmx10mm thick) in floor,skirting etc. set in 20mm sand cement morter(1:4) and 2mm thick cement slurry back side of tiles…….white cement for joint filling with ...... |
| 9 | Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick)it - 05,page- 198 |
| 10 | Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer\"s specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contrr]e) I(I) With application slurry @1.75 kg/ Sq.m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint filling with pigment.[Ref. P.W.D. Bldg. Sche. It. No.36,P.No.66].(B). Light Colour. |
| 11 | Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer\"s specification) including cleaning and smoothning of surface.Two Coats.It -10, page- 196 |
| 12 | Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. A) Ground Floor |
| 13 | (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : [ ( Ref. PWD Sch, P-200, It. No.2 A ( b ) ].(b) On steel or other metal surface : With super gloss (hi-gloss) - (ii) Two coats (white in shade). |
| 14 | Supplying, fitting and fixing windows and ventilators with or without integrated grills ........Without integrated grills. (b) Openable steel windows as per IS sizes with side hung shutters and horizotal glazing bars. [The extra rate admissible for the openable portion only].Ref. PWD Sch,P.No.107 , It.No. 20 ]. |
| 15 | Supplying, fitting & fixing Bib Cock or stop cock : [(Ref. Sche. Sanitation & Plumbing, P-6,It. No.7)].(ii) Chromium plated Bib Cock long body with wall flange with aerator (Equivalent to Code No. 512 & Model - Tropical / Sumthing Special of ESSCO or similar brand). |
| 16 | ( b ) (ii) Chromium plated Concealed Stop Cock (Equivalent to Code No. 514(A) & Model - Tropical / Sumthing Special of ESSCO or similar brand). |
| 17 | Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, ……. and painting the brackets with two coats of approved paint.iii) 630 mm X 450 mm size [(Ref. Sche. Sanitation & Plumbing, P-41,It. No.2)]. |
| 18 | Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. (v) 900 mm long. [(Ref. Sche. Sanitation & Plumbing, P-43,It. No.9)]. |
| 19 | Supplying,fitting and fixing cast iron \"P\" or \"S\" trap conformimg to I.S. 3989/ 2009 …... to the exposed surface. (Painting to be paid seperately. [(Ref. Sche. Sanitation & Plumbing, P-65,It. No.14)]. |
| 20 | Supplying, fitting and fixing Anglo-Indian W.C. in white glazed vitreous china ware of approved make complete in position with necessary bolts, nuts etc. (a) With \"P\" trap (with vent).[(Ref. Sche. Sanitation & Plumbing, P-79,It. No.3)]. |
| 21 | Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two |
| 22 | Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware…….. 75 mm X 75 mm X 75 mm wooden blocks complete.[(Ref. Sche. Sanitation & Plumbing, P-80,It. No.6)].i) 635 mm X 395 mm X 420 mm |
| 23 | Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete. [(Ref. Sche. Sanitation & Plumbing, P-81,It. No.10)].(b) Anglo Indian. (ii) Plastic (hallow type) white |
| 24 | Supplying, fitting and fixing urinal flush pipe fittings of approved brand. [(Ref. Sche. Sanitation & Plumbing, P-81,It. No.12].(b) C.P. urinal flush pipe fittings range of two |
| 25 | Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specifications ……., frame size 550 mm X 400 mm. [(Ref. Sche. Sanitation & Plumbing, P-81,It. No.19)].coats of painting to bracket etc. (ii) 600 mm X 450 mm |
| 26 | Supplying, fitting and fixing towel rail with two brackets. [(Ref. Sche. Sanitation & Plumbing , P-81, It. No.22)]. (b) Aluminium. (iii) 25 mm dia. and 750 mm long. |
| 27 | Supplying, fitting and fixing PVC pipes for underground work of approved make of Schedule 80 (medium duty) conforming to ASTMD -1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross,elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc.fitted including cost of all materials ,jointing materials, cutting pipes,making threads ,cutting trenches upto 1.5 metre below surface in all sortsof soil and refilling the same as directed complete in all respect. (Paymentwill be made on the centre line measurement of the total pipe lineincluding all specials No separate payment will be made for accessories,specials.)PVC Pipes.(Dia).[ Ref.PWD Sch.S & P,P.No.13, It.No.19(II) ].25mm |
| 28 | Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987;(A) clear, toughened glass conforming to IS: 2553-1992 (part-II) page - 328 (i) 6mm thick |
| 29 | Supplying 1.5mm thick M.S. sheet fitted and fixed on one or both faces of M.S./ W.I. gate etc. with point welding at not more than 150mm apart complete in all respect as per design including cost of all labour and materials. |
| 30 | Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately) (a) 40mm X 6mm, 250mm Length |
| 31 | Anodised aluminium barrel / tower / socket bolt (full covered) of approved ....with cadmium plated screws:(x) 300mm long x 12mm dia. bolt. |
| 32 | Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixedcomplete:(iii)100mm grip x 12mm dia rod |
| 33 | i) Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with16mm dia rod with centre bolt and round fitting. (c) 300mm long. |
| 34 | Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 205/66) and fitted and fixed withcadmium plated screws:(ix) 125 x 75 x 4.0mm. |
| 35 | Iron parliamentary hinges conforming to IS 362-1982 fitted and fixed completewith steel screws. Page- 141 (g) 150mm. X 125mm. X 27mm. X 2.50mm. |
| 36 | (d) (i) Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand). P- 06, it -7 (d)1 |
| 37 | Cleaning and removing mud upto 2000 litre Water Tank including masonry reservoir. It- 12, p- 39 |
| 38 | Removing chokage in G.I. pipe including cleaning pipe. (iii) 25 mm |
| 39 | (b) Socket, Reducing socket, Bend, Plain equal elbow, Reducing elbow,Nipple, Short piece.P- 22, it- 35 (b) ii (ii) Above 25 mm upto 50 mm dia. |
| 40 | Add GST @ 18% |
| 41 | Add Cess @ 1% |
