Tender For Annual Repair And Maintenance Of Building In Bm-Iii Division During 2022-23.Sub Head :- Sub Head:- Repair And Maintenance Of Motor Pumps, Allied Electrical Items Etc. Under Golf Linkservicecentre, delhi-Delhi

Annual Repair And Maintenance Of Building In Bm-Iii Division During 2022-23.Sub Head :- Sub Head:- Repair And Maintenance Of Motor Pumps, Allied Electrical Items Etc. Under Golf Linkservicecentre-- 1 Rewinding of 5 H. P Capacity AC monoblock pump set 3 phase 400/440 volts 2200 RPM with superior quality copper wire of appropriate size including testing, welding, turning, threading alignment of shaft and minor lath works to match the spare parts (wherever required) etc. complete including labour charges for dismantling, reassembling and installation of pump set at site to workshop and workshop to site back and as per the direction of Engineer-in-charge. 2 Repairing & Rewinding of water monoblck pum ofup to7.5 H P 3 Phase 440 Volts, 50 HZ with suitable size of copper wire with allied rewinding material vamishing,dismantling from jthe foundation and reinstalling of reair i/c electric cable connection testing etc, as per required and direction & Satisfaction of Engineer- in charge. 3 Providing & fixing phase sequence corrector for up to 10 H.P pump set Bentse make for protectionn of single phasing and phase changing automatically, cartage labour charges for fixing wire thimble etc, as per the direction of Engineer in charge 4 Rewinding of & electric submrsible Motor pump up to 10 H.P. & capacity 3 Phase 420 Vp;ts A.cSupply 50 HZ kirloskar/mody make with suitable size of copper wire with allied rewinding material i/c dismantling and rcasscmbling etc, as required 5 Providing and fixing of ball bearing suitable for mody / KSB Make water submersible clectric pump etc as required Upper bearing 10/7.5 HP 6 Lowerbearing 10/7.5 HP 7 Providing and fixing 25 A contactor L&T /BCH or approved make for star delta automatic starter all complete as per direction and satisfaction of Engineer-in-charge. 8 Providing and fixing over load relay 9-14A of approved make and quality and as per direction and satisfaction of Engineer-in-charge. 9 Providing and replacing volt meter 96x96 sq mm ( 0.500 volt s) of A.E ( automatic electric) slemers or equlvalentall complete as per direction and satisfaction of Engineer-in-charge. 10 Providing & fixing32 AMP 1.PH M.C.B of make 1&1 Fajui / Havellsincluding fixing charge etcas per the direction of Engineer in charge 11 Providing and Fixing 63 AMP TPNMCB of make L&T /Fauuji / Havells makes ie fixing charge etcas per direction and satisfaction of Engineer-in-charge. 12 Providing & fixing indicating lamp 22 mm dia BCH make labour sharges for removing & fixing the lamp I / ccargtage testing etc as per the direction of Engineer in charge 13 Providing and fixing single phasing preventer of approved make L &T siemens minilac etcup to 10Hp monoblock pump sct as per direction ofEngineer-in-charge. 14 Providing and Fixing electric motor fan upto 10HP Motor pump set as per direction ofEngineer-in-charge. 15 welding turning , threading and alignment of roller shaft etc as per the direction of Engineer in charge 16 Providing & fixing Gun metal slceve graphite cotton of required size in pumpe set including Glad dori in upt 10 Hp pump setetc as per the direction of Engineer in charge 17 Providing & fixing cast iron impeller suitable for the monoblock pumps upto 10. H.P Pump as perthe direction of Engineer in charge 18 Providing & fixing ball bearing SKF // NBC in existing motor pumps set including greasing cleaningat sctting inn position ( main and endbearing ) for upt 10. H.P Pump as perthe direction of Engineer in charge 19 Providing & fixing 1.5 mm PVC insulate 2 core copper wire of aprovd make and quality and asas perthe direction of Engineer in charge 20 Supplying and fixing PVC insulated cp[[er wire of 4 mm approved make and quality ansas perthe direction of Engineer in charge 21 Providing and replacing ampear meter 96x96sq mm ( 0.30 AMP) of make A.E. ( Automatic 1:lcctric simcns or equivalent complete as perthe direction of Engineer in charge 22 Labour charge for dismantling and reasembling of pump set after reparing the same i/c cartage of motor to work and back at site upto 10 H.P Mono Block pump set,as per the direction of engineer-in-charge. 23 Lifting and taking outup to 10 HP sewage drainage and clean water submersible drainage and clean water submersible pump tube well etc with the help of chain pullyand tripot delivery pipe line and electric connection etc as per the direction of engineer –in –charge. 24 Installing lowering of sewage/drainage/clear water submersibble pumps setup to 10 HP capacity and clean water submersible pump tube well etc with the help of chain pullyand tripot delivery pipe line and electric connection etc as per the direction of engineer –in –charge. 25 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work50 mm dia nominal bore 26 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) 50 mm nominal bore 27 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm nominal bore 28 Providing and fixing gun metal non- return valve of approved quality (screwed end) : 50 mm nominal boreVertica

Refer document

INR 9727.0 /-

INR 4.86 Lakhs /-

Name of work : A/R & M/O Building in BM-III Division During 2022-23. Sub Head :- Sub Head:- Repair and maintenance of motor pumps, allied electrical items etc. under Golf LinkServiceCentre.

Sl. No.	Item Description
1	Rewinding of 5 H. P Capacity AC monoblock pump set 3 phase 400/440 volts 2200 RPM with superior quality copper wire of appropriate size including testing, welding, turning, threading alignment of shaft and minor lath works to match the spare parts (wherever required) etc. complete including labour charges for dismantling, reassembling and installation of pump set at site to workshop and workshop to site back and as per the direction of Engineer-in-charge.
2	Repairing & Rewinding of water monoblck pum ofup to7.5 H P 3 Phase 440 Volts, 50 HZ with suitable size of copper wire with allied rewinding material vamishing,dismantling from jthe foundation and reinstalling of reair i/c electric cable connection testing etc, as per required and direction & Satisfaction of Engineer- in charge.
3	Providing & fixing phase sequence corrector for up to 10 H.P pump set Bentse make for protectionn of single phasing and phase changing automatically, cartage labour charges for fixing wire thimble etc, as per the direction of Engineer in charge
4	Rewinding of & electric submrsible Motor pump up to 10 H.P. & capacity 3 Phase 420 Vp;ts A.cSupply 50 HZ kirloskar/mody make with suitable size of copper wire with allied rewinding material i/c dismantling and rcasscmbling etc, as required
5	Providing and fixing of ball bearing suitable for mody / KSB Make water submersible clectric pump etc as required Upper bearing 10/7.5 HP
6	Lowerbearing 10/7.5 HP
7	Providing and fixing 25 A contactor L&T /BCH or approved make for star delta automatic starter all complete as per direction and satisfaction of Engineer-in-charge.
8	Providing and fixing over load relay 9-14A of approved make and quality and as per direction and satisfaction of Engineer-in-charge.
9	Providing and replacing volt meter 96x96 sq mm ( 0.500 volt s) of A.E ( automatic electric) slemers or equlvalentall complete as per direction and satisfaction of Engineer-in-charge.
10	Providing & fixing32 AMP 1.PH M.C.B of make 1&1 Fajui / Havellsincluding fixing charge etcas per the direction of Engineer in charge
11	Providing and Fixing 63 AMP TPNMCB of make L&T /Fauuji / Havells makes ie fixing charge etcas per direction and satisfaction of Engineer-in-charge.
12	Providing & fixing indicating lamp 22 mm dia BCH make labour sharges for removing & fixing the lamp I / ccargtage testing etc as per the direction of Engineer in charge
13	Providing and fixing single phasing preventer of approved make L &T siemens minilac etcup to 10Hp monoblock pump sct as per direction ofEngineer-in-charge.
14	Providing and Fixing electric motor fan upto 10HP Motor pump set as per direction ofEngineer-in-charge.
15	welding turning , threading and alignment of roller shaft etc as per the direction of Engineer in charge
16	Providing & fixing Gun metal slceve graphite cotton of required size in pumpe set including Glad dori in upt 10 Hp pump setetc as per the direction of Engineer in charge
17	Providing & fixing cast iron impeller suitable for the monoblock pumps upto 10. H.P Pump as perthe direction of Engineer in charge
18	Providing & fixing ball bearing SKF // NBC in existing motor pumps set including greasing cleaningat sctting inn position ( main and endbearing ) for upt 10. H.P Pump as perthe direction of Engineer in charge
19	Providing & fixing 1.5 mm PVC insulate 2 core copper wire of aprovd make and quality and asas perthe direction of Engineer in charge
20	Supplying and fixing PVC insulated cp[[er wire of 4 mm approved make and quality ansas perthe direction of Engineer in charge
21	Providing and replacing ampear meter 96x96sq mm ( 0.30 AMP) of make A.E. ( Automatic 1:lcctric simcns or equivalent complete as perthe direction of Engineer in charge
22	Labour charge for dismantling and reasembling of pump set after reparing the same i/c cartage of motor to work and back at site upto 10 H.P Mono Block pump set,as per the direction of engineer-in-charge.
23	Lifting and taking outup to 10 HP sewage drainage and clean water submersible drainage and clean water submersible pump tube well etc with the help of chain pullyand tripot delivery pipe line and electric connection etc as per the direction of engineer –in –charge.
24	Installing lowering of sewage/drainage/clear water submersibble pumps setup to 10 HP capacity and clean water submersible pump tube well etc with the help of chain pullyand tripot delivery pipe line and electric connection etc as per the direction of engineer –in –charge.
25	Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 50 mm dia nominal bore
26	Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) 50 mm nominal bore
27	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm nominal bore
28	Providing and fixing gun metal non- return valve of approved quality (screwed end) : 50 mm nominal boreVertica