|
| 1 | Earthwork in Earth work in excavation by mechanical means (hydraulic excavator) intrenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m inwidth) and for shafis, wells, cesspits and the like not exceeding 10 sqm onplan, including dressing of sides and ramming of bottoms lifi upto 1.3 m,inciuding gelting out excavaled earth and disposal of surplus excavaled earthas directed, within a lead of 50 metres:ALL KINDS OF SOIL |
| 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sidesofjoundations etc. in layers not exceeding 20 Cm in depth, consolidating eachdeposited layer by ramnming and watering, lead upto 50 m and lift upto 1.5 m |
| 3 | Providing and laying of hand packed stone boulder (size 15Omm-230mm)|before laying of mud mat compacted consolidated rammed filling the voids |
| 4 | Providing/ laying pOsition cement concrete of specified grade excl. cost ofcentering and shuttering all work upto pliñth lëvël 1:3:6 (atöñë agg. 40mmnom. Size) |
| 5 | Providing and laying in position machine batched and machine mixed designmix M-25 grade cement concrete for reinforced cement concrete work,using|cement content as per appeoved design mix, inciuyding pumping of concrete tosite laying but excluding the cost of centering,.shutteringfinishing andreinforcement, including admixtures in recommended proportiond as perIS:9103 to accelerate, retard setting of concrete, improve workability withoutimpairing strength and durability as per direction of Engineer-in-charge.Note: Cement in this item is @330 kg/ cum. Fxcess or less cement used asper design mix is content considered payable or recoverable seperately allworks up to plinth level |
| 6 | Providing and laying in position machine batched and machine mixed designmix M-25 grade cement concrete for reinforced cement concrete work,using|cement content as per appeoved design mix, inciuyding pumping of concrete tosite laying but excluding the cost of centering,.shutteringfinishing andreinforcement, including admixtures in recommended proportiond as perIS:9103 to accelerate, retard setting of concrete, improve workability withoutimpairing strength and durability as per direction of Engineer-in-charge.Note: Cement in this item is @330 kg/ cum. |
| 7 | Centering and shuttering etc and removal of formwork for walls |
| 8 | Steel reinforcement for RC.C. work including straightening, cutting. bendingplacing in position and binding all complete above plinth level ThermoMechanically Treated bars of grade Fe-550 D or more ( Sail/Jindal Panther/Tata Tiscon) |
| 9 | Structural steel work in built up sections, trusses and framed work, including ( SAIL)cutting, hoisting, fixing in position and applying a priming coat of approvedsteel primer all complete.plate, including cutting, hoisting, fixing in positionand applying a priming coat of opproved steel primer all complete. |
| 10 | Supplying and filling in plinth with fine sand under Jloors including, watering,ramming, consolidating and dressing complete. |
| 11 | Supplying and Filling of local earth (incluling royalty)by mechanicalransport upto a lead of 5 km also including ramming and walering of fheearth in layers not exceeding 20 cm in trenches. plinth, sides o/ foudatio 11 elc. Complete |
| 12 | Providing and fixing bolis including uts, washers conmplete job |
| 13 | Brick work with FPS bricks of designation 75 in 1:6 mix including Carriage Complete Job |
| 14 | 12MM CEMENT PLASTER (1:4)MIX IN WALLSComplete job |
| 15 | 15MM THICK CEMENT PLASTER IN CIELINGS (1:4)MIX . |
| 16 | CEMENT CONCRETE FLOORING 1:2:4MIXfinishing with a floating coat of neat cement including cement slurry and curring complete, but excluding the cost of nosing of steps etc complete .(25mmthick). |
| 17 | Providing and fixing stainless steel (Grade 304) railing made of Hollowtubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 18 | P/f of 12mm thick wooden imported panelling over 12mm plywoodbasework / Jam work and applying a ready made wax touch wood includingcost of cornice complete job |
| 19 | P/f of budloo wood Khatambani ceiling ( Punch Muaraba) Over base wood of 12mm Ply wood and Cornice 40mm , and applying two or more coats of ready made wax |
| 20 | Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete :20 mm dia. |
| 21 | Providing and applying of POP 2mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 22 | Finishing walls with 100% premium acrylic emlsion paint having voc less than 50gms/ltrand uv resistance as per IS 15489-2004 . |
| 23 | Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metallic colour of approved shades made out of 3mm thick aluminium composite panel material consisting ofmm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 andpolymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc and bas work of aluminiumangles ,channels etc |
| 24 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Raj Nagar plain white marble/Udaipur green marble/ |
| 25 | P/f of antiskid vitrified floor tiles of standard made ( kajaria rak, nitco in all colours and size (2\"-0\"x2\"-0\") and above as approved by the consultant laid on 20mm thick cement mortor in 1:4mix.including pointing the joints in white cement and matching pigments etc complete job. |
| 26 | p/l of ceramic tiles in walls of min size 300mmx450mm including the preparation of base all complete job. |
| 27 | PROVIDING WOOD WORK IN Frames of doors .windows ,clerestory windows and others frames ,wrought framedand fixed in position complete job(KD or equivalent). |
| 28 | Providing and fixing of MS holds fasts 50cm long (40x5)mm embedded in cement concrete. |
| 29 | P/f panelled or panelled and glazed shutters for door ,windows and clerestory windows fixing with butt hinges of required size with necessary screws . excluding panelling which will be paid for separtely . all complete as per direction of engineer -in-charge KD |
| 30 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of averagewidih for uperture 1.4 mm in both directions wilh wire of dia. 0.63 mm for doors,windows and clerestory windows with ISI marked M.S. pressed butt hinges brightfinished of required size with necessary screws as per direction of Engineer KD |
| 31 | P/f of 5mm sheet glass of saint gobain or equivalent including cost of kail wood beading fixed the cost of fittings and fixtures approved specifications. |
| 32 | Painting new wood /wood based surfaces with two or more coats of paint to an even shade including priming and preparation of surface by sand preparintg ad cleaning . |
| 33 | Making plinth protection 30mm thick of cement concrete 1:3:6 over 75 mm bed of dry brick baliast 40mm nom. Size well rammed consolidated and grouted with fine sandincl. finishing the top smooth |
| 34 | P/F of Al ISI Marked fittings to doors, windows of required colour and shade with necessary screws complete job |
| 35 | P/ F of 40 mm thick 300 mm wide eaves boarding of best quality kailwood, with moulded |
| 36 | P/F of 19nmm thickness sofit of budloo wood specifications. Including jam work(1.5\"x3\" )budloowood) underneath complete. |
| 37 | Providing and fixing coloured coated sheets 5mm roofing with polymer coated j or l hooks ,nuts, bolts, washers all complete. |
| 38 | Earth work in excavation by ,mechanical means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides andramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: |
| 39 | P/l of stone soling including all carriages. |
| 40 | p/l of cement concrete 1:3:6 of sp. grade including carriage complete job. |
| 41 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 42 | Steel reinforcement for R.C.C. work including straightening,cutting, bending, placing in position and binding all complete upto plinth level TMTbars FE500 |
| 43 | Dry Random R Massonary with hard stone and Plinth SoakagePit |
| 44 | Centering and shuttering etc and removal of formwork |
| 45 | CEMENT CONCRETE FLOORING 1:2:4MIXfinishing with a floating coat of neat cement including cement slurry and curring complete, but excluding the cost of nosing of steps etc complete .(25mmthick). |
| 46 | constructing brick masonary collection chambers 600x600internal size and 600mm deep fixed with c i cover and drame 600x6000 |
| 47 | Providing and fixing water closet squatting pan (Orissa Type) with 10 litre low level P.V. C. flushing cistern including flush pipe (of approved make)11\"manually contro(led device), with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. Long pattern W.C Pan of size 580x440 mm mm |
| 48 | Providing and fixing white vitreous china pedestal type water closet( European type/ English) with seat and lid incl. 10 litre low level PVC flushing cistern with fittings, C. 1,/M.s. brackets 40mm bend diameter flush bend,11overfiow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors, wherever required:ved brand and manufacture |
| 49 | Providing and Placing in terrace PVC storage tank with cover and suitable locking arrangement incl. making necessary holes for inlet, outlet with tanki5000 Nipple and over flow pipes, ball cock, incl. all fittings (Triple Layer) |
| 50 | Providing and fixing White Vitreous China Wash basin including making all connections and making good the walls, flat back wash basin of size 550x400 |
| 51 | Providing & Fixing following PVC (B Type) fittings of approved brand and quality as directed by engineer incharge all complete.Door tee100mm size |
| 52 | pvc collar 100mm |
| 53 | pvc reducer 100x75mm |
| 54 | cowl 75mm size |
| 55 | clifs |
| 56 | vent pipe pvc 75mm |
| 57 | pvc pipe 150mm |
| 58 | pvc pipe 100mm |
| 59 | pvc pipe 50mm |
| 60 | plain bend 100mm size |
| 61 | plain bend 75mm size |
| 62 | door bend 100mm |
| 63 | door dend 100mm |
| 64 | floor trap 100mm |
| 65 | multi junction floor trap |
| 66 | Providing & Fixing of PPR( Internal work ) complete with all PPR Fittings and clamps including cutting and making good the walls whereever required as per BC and as directed by engineer incharge 15mm dia |
| 67 | 20mm dia |
| 68 | 25mm dia |
| 69 | 32mm dia |
| 70 | 40mm dia |
| 71 | union 15mm |
| 72 | union 20mm |
| 73 | union 25mm |
| 74 | union 32mm |
| 75 | union 40mm |
| 76 | Gate value15mm dia |
| 77 | 20mm dia |
| 78 | 25mm dia |
| 79 | 32mm dia |
| 80 | 40mm dia |
| 81 | Providing & Fixing of PPR( external work ) complete with all PPR Fittings and clamps including cutting and making good the walls whereever required as per BC and as directed by engineer incharge15mm dia |
| 82 | 20mm dia |
| 83 | 25mm dia |
| 84 | 32mm dia |
| 85 | 40mm dia |
| 86 | union 15mm |
| 87 | union 20mm |
| 88 | union 25mm |
| 89 | union 32mm |
| 90 | union 40mm |
| 91 | Gate value 15mm dia |
| 92 | 20mm dia |
| 93 | 25mm dia |
| 94 | 32mm dia |
| 95 | 40mm dia |
| 96 | Providing & Fixing following C.P fittings of standard quality (Jacquar Made) incl. all fixtures etc complete as per directions of engineer in chargeProviding and fixing C.P. brass bib cock long body of approved quality conforming to IS: 8931 a) 15 mm nominal bore |
| 97 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS Vo 8.000 9,600.00 standards.15 mm nominal bobre |
| 98 | Providing and fixing brass stop cock of approved quality. 20 mm nominal bore |
| 99 | Providing and fixing C.P. brass Basin mixer of approved quality conforming to IS standards and weighing not less than 1.9kg.15 mm nominal |
| 100 | Providing and fixing brass stop cock of approved quality. 20 mm nominal bore |
| 101 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick: |
| 102 | Providing and fixing water gyzer 50 litre Capacity of approved make incl. al fixing charges etc complete as approved and directed by engineer |
| 103 | Providing and fixing C.P. brass Wall mixer of approved quality conforming to 46 IS standards .15 |
| 104 | Providing and fixing PTMT towel rail complete with, brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality |
| 105 | Supply,istallation and commisioning of 2 HP motor pump (Sub mercible) of approved make |
