Bhubaneswar Development Authority-BDA has published Tender For Redevelopment Of The Shikhar Chandi Temple And Its Peripheral Region At Patia Bhubaneswar. Submission Date for this Tender is 31-03-2023. Temple Tenders in bhubaneswar Odisha. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Earth work in Stoney earth soil with initial lead and lift including rough dressing in layers not exceeding 0.3m in depth and the earth transported by transport vehicles as directed by the Engineer-In-charge. |
2 | Excavation of founation in hard rock (granite) removed by chiselling including dressing and levelling the bed not exceeding 1.5m in depth and depositing the soil within initial lead of 50m and as per specification approved by the Department |
3 | Carriage of excavated earth by mechanical means with cost of all lead & lift upto 5 km including cost of all labour, T&P etc., comp. |
4 | Filling Foundation and plinth with avelable excavated Earth including leveling and watering, all labour and matrials complete. |
5 | Supplying and filling in foundation trenches and plinth, ditcheswith sand well watered and rammed in layers not exceeding 23 cm. in depth with all lead and lift including cost, conveyance, loading and unloading, royalties and taxes of all materials and cost of all labour, sundries, T&P required for the work etc. complete in all respect as directed by the Engineer in charge. (Measurement will be taken on finished compacted section only) |
6 | Providing and laying of Cement Concrete of grade 1: 3 :6 (1cement : 3 sand : 6 graded stone aggregate of size 25mm to 40 mm hard granite crusher broken metal ) , mixing in concrete mixer ,lowering and compacting in proper thickness , watering & curing for the required period .including all cost of labour ,material, conveyance,royalties and taxes ,sundries ,T & P etc.complete as per the directions of Engineer-in-charge. |
7 | Providing and laying plain cement concrete 1:2:4 (1 cement : 2 sand : 4 stone agregate 12mm nominal size) as levelling course in foundation and plinth etc. including tempering, curring, shuttering etc. complete all depth and height. |
8 | First class Fly ash Brick masonry usingbricks of size 25cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix (1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Foundation & Plinth including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-In-Charge. |
9 | First class Fly ash Brick masonry usingbricks of size 25cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix (1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Super structure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-In-Charge. |
10 | First class Fly ash Brick masonry usingbricks of size 25cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix (1:4) with ordinary Portland slag cement (PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Super structure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-In-Charge. |
11 | Providing, lifting, hoisting and laying Reinforced cement concrete of M-25 grade as per approved designs and drawings having a minimum compressive strength (in work test) 25 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed andcleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portlandslag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position. |
12 | Footing Base |
13 | Plinth Beam |
14 | Lintel |
15 | Chajja |
16 | Column Ground Floor |
17 | First Floor |
18 | Second Floor |
19 | Roof Beam Ground Floor |
20 | First Floor |
21 | Second Floor |
22 | Roof Slab Ground Floor |
23 | First Floor |
24 | Second Floor |
25 | Staircase Ground Floor |
26 | First Floor |
27 | Second Floor |
28 | Providing, fixing and placing of Fe-500/ Tor steel (HYSD) for RCC work in lintel of required diameter of TATA/SAIL/VIZAG with straightening, Cutting, bending, bindingwelding or jointing if necessary, bending, binding, tying the grills as required for R.C.C. works, providing fan hooks where necessary and hoisting, lowering and placing in proper position according to approved designs and drawings including cost, conveyance, loading, unloading, taxes of M.S. rods or Tor steel and binding wires of 18 to 20 gauge required for the work and cost of all labour, sundries, T & P and scaffolding complete in all respect as directed by the Engineer-in-Charge ( payment will be made according to the actual weight of M.S rod /Tor steel consumed in the work and no separate payment will be made towards weight of binding wires which is to be borne by the contractor at his own cost |
29 | Ground Floor |
30 | First Floor |
31 | Second Floor |
32 | Providing 12mm thick cement plaster in all floors at all height with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to outside smooth surface of brick masonry walls after racking out the joints including watering and curing, rounding of corners, etc. complete with cost, conveyance, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge. |
33 | Providing 16mm thick cement plaster with cement mortar of (1:6) to the brick surface including roughening, scraping and cleaning and finishing the plastered surface smooth using wooden floats only to proper plumbs and level, making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing ,sundries and T&P etc. complete as per direction of the Engineer-in-charge |
34 | Providing 6mm thick cement plaster in all floors at all height with cement mortar of mix (1:4) to RCC surface finished smooth including deep chipping and slurry treatment with screened and washed sharp sand for mortar and finished smooth to outside smooth surface of brick masonry walls after racking out the joints including watering and curing, rounding of corners, etc. complete with cost, conveyance, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge. |
35 | Ground Floor |
36 | First Floor |
37 | Second Floor |
38 | Providing and laying Vitrifiedfloor tiles 600x600 mm (thickness to be specified by the manufacturer) 1st qualityof NITCO, SOMANY, ASIAN, KAJARIA or equivalent approved make, colours & shades laid on 20 mm thick cement mortar 1:4 (1cement: 4coarse sand ) including pointing the joints with white cement and matching pigments, etc. complete as per direction ofEngineer-In-Charge at all floors and all heights. |
39 | Providing and layingVitrifiedskirting tiles 600x600 mm (thickness to be specified by the manufacturer) 1st quality conforming to IS: 15622 of NITCO, SOMANY, ASIAN, KAJARIA or equivalent approved make, colours & shades, except white, ivory, grey, fume red brown, laid on 12 mm thick cement mortar 1:3 (1cement: 3coarse sand ) including pointing the joints with white cement and matching pigments, etc. complete as per direction of EIC at all floors and all heights. |
40 | Providing and layingMatte Finish Vitrifiedfloor tiles 600x600/450X450 mm (thickness to be specified by the manufacturer) 1st quality conforming to IS: 15622 of NITCO, SOMANY, ASIAN, KAJARIA or equivalent approved make, colours & shades, except white, ivory, grey, fume red brown, laid on 20 mm thick cement mortar 1:4 (1cement:4coarse sand) including pointing the joints with white cement and matching pigments, etc. complete as per direction ofEngineer-In-Charge at all floors and all heights. |
41 | Providing and fixing 1st quality Ceramic glazed wall tilesconforming to IS : 15622 (thickness to be specified by the manufacturer) minimum thickness 5mm of NITCO, SOMANY, ASIAN, KAJARIAor equivalent approved make in all colours, shades except burgundy, bottle green, black of size 300x450mm or 300x600mm in skirting and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete as per direction ofEngineer-In-Charge at all floors and all heights. |
42 | Providing and fixing 20mm thick Granite stone flooring(sample of Granitestone should be approved byEngineer-In-Charge) for Floor and similar locations where ever required in horizontal/vertical surfaces of required size of approved shade, colour and texture, with moulding edge & approved groove pattern etc. laid over 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) with joints treated with white cement mixed with matching pigment, epoxy touch ups including rubbing, curing, moulding, groving and polishing, to give high gloss finish etc. complete as per direction of Engineer-in-charge. In all floors and all heights. |
43 | Ground Floor |
44 | First Floor |
45 | Second Floor |
46 | Providing and fixing 20mm thick Granite stone Skirting(sample of Granitestone should be approved byEngineer-In-Charge) for Skirting, Dados,and similar locations where ever required in horizontal/vertical surfaces of required size of approved shade, colour and texture, with moulding edge & approved groove pattern etc. laid over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) with joints treated with white cement mixed with matching pigment, epoxy touch ups including rubbing, curing, moulding and polishing to give high gloss finish etc. complete as per direction of Engineer-in-charge. In all floors and all heights. |
47 | Providing and fixing 20mm thick Exterior Decorative Stoneflooring(Use of Stone - Granite, Marble & Khandolite Stone for Decorative Flooring design should be approved byEngineer-In-Charge) for Floor and similar locations where ever required in horizontal/vertical surfaces of required size of approved shade, colour and texture, with moulding edge etc. laid over 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) with joints treated with white cement mixed with matching pigment, epoxy touch ups including rubbing, curing, moulding and polishing to give high gloss finish etc. complete as per direction of Engineer-in-charge at all floors and all heights. |
48 | Providing and fixing 16mm thcik Marble Stone for ourdoor pathway, paving and Flooring or similar locations where ever required in horizontal/vertical surfaces of required size of approved shade, colour and texture, with moulding edge etc. laid over 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) with joints treated with white cement mixed with matching pigment, epoxy touch ups including rubbing, curing, moulding and polishing to give high gloss finish etc. complete as per direction of Engineer-in-charge at all floors and all heights. |
49 | Providing and fixing 16mm thick Khandolite stone Skirting & Cladding(sample of Khandolite stone should be approved byEngineer-In-Charge) for dustbin and similar locations where ever required in horizontal/vertical surfaces of required size of approved shade, colour and texture, with moulding edge & approved groove pattern etc. laid over 12mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) with joints treated with white cement mixed with matching pigment, epoxy touch ups including rubbing, curing, moulding and polishing to give high gloss finish etc. complete as per direction of Engineer-in-charge. In all floors and all heights. |
50 | Providing and fixing 25 mm thick Khandolite stone flooring(sample of Khandolite stone should be approved byEngineer-In-Charge) for Temple Plaza and similar locations where ever required in horizontal/vertical surfaces of required size of approved shade, colour and texture, with moulding edge & approved groove pattern etc. laid over 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) with joints treated with white cement mixed with matching pigment, epoxy touch ups including rubbing, curing, moulding and polishing to give high gloss finish etc. complete as per direction of Engineer-in-charge. In all floors and all heights. |
51 | Providing and fixing 25mm thick Khandolite stone Skirting & Cladding(sample of Khandolite stone should be approved byEngineer-In-Charge) for slab edges, wall etc. & similar locations where ever required in horizontal/vertical surfaces of required size of approved shade, colour and texture, with moulding edge & approved groove pattern etc. laid over 12mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) with joints treated with white cement mixed with matching pigment, epoxy touch ups including rubbing, curing, moulding and polishing to give high gloss finish etc. complete as per direction of Engineer-in-charge. In all floors and all heights. |
52 | Providing and fixing Best quality Khandolite stone Carved Pieces in required sizes of Minimum Thickness of 50mm with carving, Moulding work upto a depth of 25mm, as given in reference drawing, neatly carved and finished including all necessary M.S. clamps, dowels etc all complete as per approved drawings, specifications and directions of the Engineer-In-Charge, including Cost of Material, Conveyance etc. complete. (The Contractor should approve the final sketch in accordance with the drawings and specifications provided, before executing the same from concerned Architect & Engineer-in-charge) |
53 | Providing and fixing Best quality Khandolite stone Plane Pieces in required sizes of Minimum Thickness of 50mm with Moulding as given in reference drawing, neatly carved and finished including all necessary M.S. clamps, dowels etc all complete as per approved drawings, specifications and directions of the Engineer-In-Charge, including Cost of Material, Conveyance etc. complete. (The Contractor should approve the final sketch in accordance with the drawings and specifications provided, before executing the same from concerned Architect & Engineer-in-charge) |
54 | Providing and fixing Best quality Khandolite stone Carved Pieces in required sizes of Minimum Thickness of 150mm with carving, Moulding work upto a depth of 100 mm, as given in reference drawing, neatly carved and finished including all necessary M.S. clamps, dowels etc all complete as per approved drawings, specifications and directions of the Engineer-In-Charge, including Cost of Material, Conveyance etc. complete. ( The Contractor should approve the final sketch in accordance with the drawings and specifications provided, before executing the same from concerned Architect & Engineer-in-charge) |
55 | Providing and fixing Best quality Khandolite stone Plane Pieces in required sizes of Minimum Thickness of 150mm with Moulding as given in reference drawing, neatly carved and finished including all necessary M.S. clamps, dowels etc all complete as per approved drawings, specifications and directions of the Engineer-In-Charge, including Cost of Material, Conveyance etc. complete. ( The Contractor should approve the final sketch in accordance with the drawings and specifications provided, before executing the same from concerned Architect & Engineer-in-charge) |
56 | Providing and fixing Best quality Khandolite stone Carved Pieces in required sizes of Minimum Thickness of 150mm with carving, Moulding work upto a depth of 50mm, as given in reference drawing, neatly carved and finished including all necessary M.S. clamps, dowels etc all complete as per approved drawings, specifications and directions of the Engineer-In-Charge, including Cost of Material, Conveyance etc. complete. ( The Contractor should approve the final sketch in accordance with the drawings and specifications provided, before executing the same from concerned Architect & Engineer-in-charge) |
57 | Providing and fixing Best quality Khandolite stone Carved Pieces in required sizes of Minimum Thickness of 75mm with carving, Moulding work upto a depth of 50mm, as given in reference drawing, neatly carved and finished including all necessary M.S. clamps, dowels etc all complete as per approved drawings, specifications and directions of the Engineer-In-Charge, including Cost of Material, Conveyance etc. complete. ( The Contractor should approve the final sketch in accordance with the drawings and specifications provided, before executing the same from concerned Architect & Engineer-in-charge) |
58 | Providing and fixing Best quality Decorative Khandolite stone Moulding work as given in reference drawing, with finished all.( The Contractor should approve the final sketch in accordance with the drawings and specifications provided, before executing the same from concerned Architect & Engineer-in-charge) |
59 | Supplying, Best Quality Khandolite stone Decorative Stone Jalli with required solid stone decorative boarderwith all side carving of depth upto 50mm.Decorative Jally made out of Stone Slabs not less than 50mm thick withstand required load/pressure. The Railing ends should be fixed to walls/columns with required hardware. The cost includes, supplying, Carving, Fixing, etc. complete as per drawings, specifications provided in working drawing and as directed by Engineer-in-charge.( The Contractor should approve the final sketch in accordance with the drawings and specifications provided, before executing the same from concerned Architect & Engineer-in-charge) |
60 | Providing and fixing Khandolite stone decorative Hollow MASTAKA as per architectural drawing with carving depth and size upto 1.50Mtr O/D 1.20 Mtr. Height min wall thickness of 100mmas specified in drawing or as directed by Project Architect including fixing the same etc. all complete |
61 | Providing and fixing Khandolite stone decorative HollowMASTAKA as per architectural drawing with carving depth and size upto 1.20Mtr O/D-0.90 MtrHeight min wall thickness of 100mm as specified in drawing or as directed by Project Architect including fixing the same etc. all complete |
62 | Providing and fixing solid Khandolite stone SINGHA MURTI as per architectural drawing or approved Design and size upto 1.5Mtr Height and proportionate width as specified Placed in position with all related hardware fittings etc. complete all as directed by EIC & Project Architect. |
63 | Providing and laying 80 mm thick factory made cement concrete interlocking paver block of M-40 grade made by block making machine with storng vibratory compaction of approved size, design & shape, laid in required colour and pattern over and including 50mm thick sand filling.as per drawing, specification and direction of Engineer-In-charge. |
64 | Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with storng vibratory compaction of approved size, design & shape, laid in required colour and pattern over and including 50mm thick sand filling.as per drawing, specification and direction of Engineer-In-charge. |
65 | Providing & Painting with synthetic enamel paint of approved brand and manufacture to give an even shade as per the instruction of Engineer-In-Charge at all floors and all heights including all material & labour complete. |
66 | Road Marking with Hot applied thermoplastic compound with reftectrissing glass beads all concrete surface(providing and laying of hot applied thermoplastic compound 2.5mm thick including reflecto rissing glass beads @ 250grms per sqm area, gthickness of 2.5mm is exclusive of surface applied glass beads as per IRC semicolumn 35. the finished surfece to be Lvl, uniform and free from streaks and holes. |
67 | Hard Granite Random Rubble Stone Masonry work in cement Mortar 1:6 in foundation and Plinth etc. complete |
68 | Providing & Applying priming one coat with Cement primer of approved brand and manufacture on plaster surface as per the instruction of Engineer-In-Charge at all elevations including all material & labour complete. |
69 | Ground Floor |
70 | First Floor |
71 | Second Floor |
72 | Providing and applying to outside walls with two or more coats ofAnti-Fungal Weather coat water proofing paint including scaffolding and cleaning the surface before application of approved colour and manufacture as per specification, instruction of Engineer-In-charge at all elevations including all material labour complete. |
73 | Ground Floor |
74 | First Floor |
75 | Second Floor |
76 | Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer,over the plastered wall surfaces to prepare the surface even and smooth as per the instruction of Engineer-In-Charge at all elevations including all material & labour complete. |
77 | Ground Floor |
78 | First Floor |
79 | Second Floor |
80 | Preparing surface and painting at all height with two or more coats of interior Plastic Emulsion "Royale Shyne" of Asian Paints or equivalent of approvedshade as per the instructions of the manufacturers; giving uniform shade etcin all heights of walls etc. including interiorwall primer & providing scaffolding, cleaning, curing and supply of all materials and labour complete as per drawing, design and direction of Architect/Engineer-In-Charge. |
81 | Providing and fixing seasoned sal wood work in frames at any locations including doors, windows, cupboard, clerestory and other framesfixing in position including cost of hinges, M.S. flat (30mm x 6mm) hold fasts lugs ordash fasteners of required dia and length as per drawing / specification, at all floors and all heights. |
82 | Providing, fitting and fixing ofapproved make 35mm thick (laminate finished thickness of the door) factory made flush doors of the followings size finished with 1mm thk. laminate of approved colour & shade to both side fixed to the teak wood bidding, complete in all respect bidding/lipping as per drawing/design. The door will be provided with all necessary fittings & fixtures, make with all materials, (excluding door Closer) labour, T&P, taxes etc. as per direction of Architect/Engineer-in-Charge. |
83 | Supplying and fitting-fixing of Un-plasticised Poly Vinyl Chloride (colour UPVC Door) (NCL/VEKA LTD) Casement ToiletDoor – 60- Series duly manufactured using UPVC reinforced profiles of 60 mm x 55 mmx2.5 mm for outer frames, 102 mm x 60 mm x 2.25 mm for casement Door Sash Profile and 74 mm x 60 mm x 2.5mm mullion profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 2.0 mm prefabricated & welded through fusion welding.The Door sash shall be fitted with 12mm thick WPC Board of Greenply make duly fixed with EPDM weathering seal resistantaccessories like Bathroom locking system made of aluminium 1 No., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges. The materials and product confirming to ASTM D 638-14, EN-477-95 and other applicable codes and standards |
84 | Providing and fixing of factory made (NCL/VEKA LTD or equivalent )of colour UPVC sliding window or openable (approved colour of Frame ) complete with U value=1.9-1.3 W/m 2k/3k, flame resistance, self extinguishing, lead free comprising colour UPVC multi chambered frame having in built UPVC roller track on top and UPVC sash with wall thickness of 2.3mm duly reinforced with G.I section 2.6 mm where ever required. All corners of frame and sash will be fusion welded. After placing12.5mm laminate glass (6mm clear toughtened +1.5 pvg laminate+5mm clear glass) Annealed glass in the sash, with suppord of hurricane bar for high wind support. uPVC glazing bead, interlock, EPDM gasket brush shall be provided including multi lock and rollers & proper drainage system shall be provided. window frame will be fixed to the wall with 100mm long and 8mm dia.Fasteners and after fixing the gap between frame and adjucent finished wall shall be filled with weather proof silicon sealant over backer rod of required size, of approved quality complete in all respect as per approved drawing & direction of the Engineer -In-Charge. |
85 | Providing and fixing M.S grill of required patterns for windows/verandahs etc. with M.S flats, square or round bars etc. including applying a coat of approved steel primer and two or more coats of synthetic enamel paint of approved make & shade, all complete as per drawing & specification. (Allsteel sections contractor"s own supply). |
86 | Supply & Fixing Rolling Shutters of with made of required Size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, on design pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing nacassary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength (IS : 4454 - part 1 & M.S. top cover of required thickness for rolling shutters and approved ball bearing). |
87 | Providing and laying grading conc. 25 mm (avg. thickness) cement concrete of required slope of mix 1:2:2 (1cement:2sand:2 graded stone aggregate of 10 mm nominal size) mixed with approved water proof compound as per manufacturer"s specification on top of slab including cement slurry, all complete, including the cost of water proofing admixture, which should be approved by the Engineer-In-Charge prior to material procurement by the contractor at all floors and all heights. |
88 | Internal Conduiting at Each Light Post from Buttomn to top with 25mm PVC Conduit Pipe from foundation to top canopy with required Bends, joints etc. as required for carrying cable |
89 | Providing and fixing of Name letter Signage with approve language - Oriya, Hindi & English of approved Letter size,Pattern/Design, Colour & hardware fittings complete with all respect etc. as per design/drawing & instruction of Architect/Engineer-In-Charge. |
90 | Providing and fixing of Name letter Signage with approve language - Oriya, Hindi & English of approved Letter size,Pattern/Design, Colour & hardware fittings complete with all respect etc. as per design/drawing & instruction of Architect/Engineer-In-Charge. |
91 | Supplying, Installation, Testing and Commissioning of Following Children"s Play Equipment as per mentioned Product details from Flora Fountains and Amusements or approved Equivalent with Body of FRP and Structure of GI of specified Dia/size and wall thickness not less than 2.0mm, etc. complete as per Technical Datasheet, Indian Standard Code and as Directed By Engineer-in-charge or Project Architect. |
92 | SPRING RIDER.:- Duck/Donald/Mickey/Fish, Area-1"x2", Height-1"-6"", Age group-2-5 years.FKR-01 |
93 | DELUXE SPRING RIDER.:-Duck/Sea Horse/Mickey/Fish, Area-1"x2", Height-1"-6"", Age group-2-5 years. FKR-03 |
94 | ROCKING BOAT.:- Area-1"x5", Safe Area-3"x7", Height-18"", Age group-2-6 years, Seat-FRP, Pipe- 25 mm, 20mm & 15mm ID G.I Medium Pipe.. FKR-06 |
95 | THREE-IN-ONE - (SEA-SAW-01, SWING-01, SLIDE-01).:- Area-7"x12", Safe Area-8"x12", Height-3"-6"", Age group-2-6 years, Seat-FRP, Pipe- 40 mm, 25mm & 15mm ID G.I Medium Pipe.. FKR-07 |
96 | SPRING SEA SAW (FOUR-SEATER) :- Area-2"x10", Safe Area-4"x14", Height-24"", Age group-2-10 years, Seat-Plastic, Pipe- Main Pipe 10 Length of 65mm ID G.I Pipe, Handle- 25mm & 20mm ID G.I Pipe.Medium Pipe. FSS-05 |
97 | ARCH SWING.:-Area-4"x10", Safe Area-4"x10", Height-7", Age group-3-14 years, Seat-02 no Rubber Seat, Main Pipe- 65mm ID B-Class G.I Pipe, Top Pipe- 50mm ID B-Class G.I Pipe, Chain- 8mm SS Chain Rubber Coated.FSW-01 |
98 | MERRY-GO-ROUND(PLATFORM).:-Area-5 Dia", Safe Area-10"x10", Height-2", Age group-3-12 years, Seat-FRP, Pipe- 32mm & 40mm MS Sq. Pipe, Handle- 20mm ID B-Class GI Pipe Bearing. FMGR-03 |
99 | FRP SPIRAL SLIDE. :- Area-10"x16", Safe Area-15"x20", Height-7", Age group-3-14 years, Slide-FRP, Pipe-Deck Pipe: 50mm ID B-Class GI Pipe, Grill- 20mm ID B-Class GI Pipe, Ladder-25mm ID B-Class GI Pipe, Step- 16-gauge MS Sheet, Handle-20mm ID B-Class GI Pipe. FFS-03 |
100 | ROTO CURVE SLIDE. :- Area-4"x16", Safe Area-7"x20", Height-7", Age group-3-14 years, Slide-Roto Mould, Pipe-Deck Pipe: 65mm ID B-Class GI Pipe, Grill- 20mm ID B-Class GI Pipe, Ladder-25mm ID B-Class GI Pipe, Step- 16-gauge MS Sheet, Handle-20mm ID B-Class GI Pipe. FRS-03 |
101 | STRAIGHT NET CLIMBER. :- Area-2"x7", Safe Area-3"x8", Height-7", Age group-3-14 years,Main Pipe-40mm ID B-Class GI Pipe, Rope-Nylon. FSC-12 |
102 | TRAMPOLIN :- Area-10" Dia, Safe Area-15" Dia, Height-4", Age group-3-14 years, Main Pipe-20mm ID B-Class GI Pipe, Handle-20mm ID B-Class GI Pipe. FSC-30 |
103 | Multi-Purpose Play Unit :-Area-13 Mtr X 9 Mtr. Consists of: - 1. Square Deck-7’ ht with FRP roof-01 no 2. Square Deck-5’ ht with FRP roof-04 no 3. Square Deck-3’ ht with FRP roof-01 no 4. Suspension Bridge-8’ long- 02no 5. Hanging Bridge-8’ long-01 no 6. FRP Tunnel-6’ long-02 no 7. Spiral Slide-7’ht: -01 no 8. Step Ladder: -02 no 9. Fire Man pole: - 01 no 10. Ship Ladder: - 01 no 11. Zebra Climber-5’ht.: - 01 no 12. Plain Slide-5’ ht.: -01 no 13. Handi Hold: - 01 no 14. Wave Slide-5’ ht.: -01 no 15. Bowl Slide-3’ ht.: -01 no. FMPU-02 |
104 | Earth work in Stoney earth for small trees with initial lead and lift including rough dressing in layers not exceeding 0.3m in depth of size 0.2x0.2x0.2 m. @ 138.71/cum and the Earth transported by transport vehicles as directed by the Engineer-in-charge. |
105 | Earth work in Ordinary soil for big trees with initial lead and lift including rough dressing in layers not exceeding 1m in depth of size 0.60mx0.60mx0.75 m. @ 138.71/cum and the Earth transported by transport vehicles as directed by the Engineer-in-charge. |
106 | Filling pits with fertile soil/ silt including carriage up to Each pit by tractor/ truck up to site and by head load up to pit. |
107 | Pit size0.2x0.2x0.2 m |
108 | Pit size 0.60mx0.60mx0.75 m |
109 | Application of organic manure, (FYM/cimpost/sludge) Including carriage upto pit, By tractor/truck upto site and by head lord upto pit |
110 | Pit size0.2x0.2x0.2 m |
111 | Pit size 0.60mx0.60mx0.75 m |
112 | Application of chemical fertilisers npk and insecticited/termicide including cost of materials/carriage and cost of application. |
113 | Pit size 0.20mtx 0.20mtx0.20mt @ 50gm of NPK and 10gm of termicides |
114 | Pit size 1.00mtx 0.60X0.60X0.75 cum @ 50gm of NPK and 10gm of termicides |
115 | Cost of planting including mixing of manure, fertilizer, pesticides and initial watering. |
116 | For shrub category |
117 | For tree category |
118 | Supporting plants with stakes including cost of stakes |
119 | For shrub category |
120 | For tree category |
121 | Replanting of Trees of by Uprooting and Digging Pits |
122 | For shrub category |
123 | For tree category |
124 | Supply, Filling, Spreading of Good earth, Garden Soil including cost of material, carriage, labour and cost of application. |
125 | Contingent expenditure including cost of ropes, implement,baskets, drums etc. |
126 | Cost of planting trees & palm including transportation upto site ( including Providing, Laying,loading, unloading, transportation, royalties, cost of all materials, labour, sundries, T&P, scaffolding, watering and curing etc. complete in all respect as per specification and direction of Engineer-in-charge. Trees |
127 | Hibiscus tiliaceus variegated.Height-8-10" |
128 | Cordia sebestena. Height-8-10" |
129 | Conocarpus lancifolius. Height-8-10" |
130 | Terminalia mantaly. Height-8-10" |
131 | Terminalia arjuna. Height-8-10" |
132 | Terminalia catappa. Height-8-10" |
133 | Pongamia pinnata. Height-8-10" |
134 | Lagerstroemia speciosa. Height-8-10" |
135 | Tabebuia rosea. Height-8-10" |
136 | Tabebuia chrysantha. Height-8-10" |
137 | Alstonia scholaris. Height-8-10" |
138 | Millingtonia hortensis. Height-8-10" |
139 | Pterospermum acerifolium. Height-8-10" |
140 | Cassia nodosa.Height-8-10" |
141 | Sterculia alata.Height-8-10" |
142 | Bombax ceiba. Height-8-10" |
143 | Spathodea campanulata. Height-8-10" |
144 | Bauhinia blackae. Height-8-10" |
145 | Azardirachta indica Height-8-10". |
146 | Melia azardirach. Height-8-10" |
147 | Podocarpus macrophyllus Height-8-10" |
148 | Terminalia mantaly variegated Height-8-10" |
149 | Plumeria alba .Height-8-10" |
150 | Plumeria Thai varieties .Height-8-10" |
151 | Michelia champaca .Height-8-10" |
152 | Albizia lebbeck .Height-8-10" |
153 | Arecanut palm .Height-5-6" |
154 | Raphis palm .Height-3-4" |
155 | Foxtail Palm .Height-8-10" |
156 | Arenga palm .Height-8-10" |
157 | Bottle palm .Height-8-10" |
158 | Veitchia golden .Height-5-6" |
159 | Kentia palm .Height-8-10" |
160 | Cost of planting trees & palm including transportation upto site ( including Providing, Laying,loading, unloading, transportation, royalties, cost of all materials, labour, sundries, T&P, scaffolding, watering and curing etc. complete in all respect as per specification and direction of Engineer-in-charge. Small Palms |
161 | Bauhinia tomentosa .Height 3-4" |
162 | Bauhinia acuminata.Height 3-4" |
163 | Tecoma gaudichaudi.Height 3-4" |
164 | Calliandra haematocephala rubra.Height 3-4" |
165 | Calliandra haematocephala rosea.Height 3-4" |
166 | Calliandra brevipes.Height 3-4" |
167 | Limonia spectabilis variegated.Height 3-4" |
168 | Limonia spectabilis .Height 3-4" |
169 | Cassia biflora.Height 3-4" |
170 | Murraya exotica.Height 3-4" |
171 | Sanchezia nobilis.Height 3-4" |
172 | Eugenia myrtifolia.Height 3-4" |
173 | Nicodivia spp.Height 3-4" |
174 | Jatropha panduraefolia green.Height 3-4" |
175 | Jatropha panduraefolia variegated.Height 3-4" |
176 | Cerbera odollam.Height 3-4" |
177 | Ficus reginald.Height 3-4" |
178 | Ficus lyrata.Height 3-4" |
179 | Ficus panda.Height 3-4" |
180 | Loropetalum chinensis.Height 3-4" |
181 | Juniperus golden.Height 3-4" |
182 | Thuja compacta .Height 1-2" |
183 | Canna dwarf.Height 1-2" |
184 | Canna variegated . .Height 1-2" |
185 | Heliconia psittacorum.Height 1-2" |
186 | Dianella spp .Height 1-2" |
187 | Hymenocallis lily .Height 1-2" |
188 | Crinum red lily.Height 1-2" |
189 | Pandanus yellow .Height 1-2" |
190 | Pandanus white variegated .Height 1-2" |
191 | Zephyranthes lily .Height 1-2" |
192 | Russelia juncea red.Height 1-2" |
193 | Russelia juncea yellow.Height 1-2" |
194 | Alpinia zerumbet .Height 1-2" |
195 | Malphigia golden .Height 1-2" |
196 | Malphigia green .Height 1-2" |
197 | Malphigia variegated .Height 1-2" |
198 | Dracaeana Mahatma red .Height 1-2" |
199 | Ixora Thai pink .Height 1-2" |
200 | Ixora Thai red .Height 1-2" |
201 | Ixora Thai yellow .Height 1-2" |
202 | Ixora Thai White .Height 1-2" |
203 | Plumbago capensis .Height 1-2" |
204 | Acalypha rosea .Height 1-2" |
205 | Alternathera spp red/yellow .Height 1-2" |
206 | Iresine herbestii .Height 1-2" |
207 | Cuphea hyssopifolia .Height 1-2" |
208 | Lantana sellowiana .Height 1-2" |
209 | Lantana depressa red/yellow .Height 1-2" |
210 | Ipomoea green .Height 1-2" |
211 | Ipomoea Purple .Height 1-2" |
212 | Serissa foetida .Height 1-2" |
213 | Monstera spp .Height 1-2" |
214 | Money plant large leaved .Height 1-2" |
215 | Mini tagar.Height 1-2" |
216 | Mini tagar variegated .Height 1-2" |
217 | Areca Palm .Height 1-2" |
218 | Allamanda dwarf .Height 1-2" |
219 | Graptophyllum spp .Height 1-2" |
220 | Eranthemum tricolor .Height 1-2" |
221 | Justicia variegated .Height 1-2" |
222 | Barleria cristata .Height 1-2" |
223 | Verbena perennial .Height 1-2" |
224 | Abelia variegated .Height 1-2" |
225 | Development of lawn :- i)Clearance of site, excavation of around upto a depth of 30cm, removal of excavated materials to outside for dumping at suitable places. |
226 | Development of lawn :-Mexican grass ii)Providing and laying Neelgiri /Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge. |
227 | Development of lawn :-Bermuda Grass iii)Providing and laying Bermuda grasswith earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge. |
228 | Shifting of Existing tree:-Uprooting the Existing Trees with utmost care and replanting it at the designated position on site (including Uprooting, Laying,loading, unloading,Planting, Watering, Stacking and giving required Manure, transportation, royalties, cost of all materials, labour, complete in all respect as per specification and direction of Engineer-in-charge) |
229 | Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness. |
230 | Dismantling brick or stone masonry in lime or cement mortar under 3m. height including stacking the useful materials for reuse and removing the debris within 50m. Lead |
231 | Dismantling and removing cement concrete including stacking the useful materials for reuse and removing the debris within 50m lead |
232 | Dismantling and removing R.C.C. columns beams slab staircase landing lintels including stacking the useful materials for reuse and removing the debris within 50m lead |
233 | Dismantling and removing R.C.C. Chajja, Shelves, fins and parapet including stacking the useful materials for reuse and removing the debris within 50m lead |
234 | Dismantling and removing old tiled flooring including removing the base coarse and stacking the useful materials for reuse and removing the debris within 50m lead |
235 | Dismantling and removing old cladding from walls including racking out joints 12mm deep stacking the useful materials for reuse and removing the debris within 50m lead |
236 | Dismantling and removing doors, windows and ventilators including removal of frame, hinges, fastening and stacking the same for reuse and removing the debris within 50m lead |
237 | INTERNAL P.H. & SANITARY WORK. GPH Works: Supplying allmaterials, labour, T&P and providing and fixing to wall or ceiling and floor pvc pipes confirming to SDR-11and pipe fittings of the following nominal borewith clamps including making good the wall, ceiling and floor, testing all complete as per specification and direction of the Engineer-in-charge. |
238 | 20 mm CPVCpipes (Astral/Oriplast/Supreme) |
239 | 25 mm CPVCpipes (Astral/Oriplast/Supreme) |
240 | 40 mm CPVCpipes (Astral/Oriplast/Supreme) |
241 | 50 mm CPVCpipes (Astral/Oriplast/Supreme) |
242 | 65 mm CPVCpipes (Astral/Oriplast/Supreme) |
243 | Supplying allmaterials, labour, T&P and providing and fixing to wall or ceiling and floor pvc pipes65 mm dia GI PIPE (Jindal, Tata, or equvalent) Heavy Type-C. |
244 | Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings etc. all complete as per P.H. specification and direction of Engineer-in-charge. (250 mm thick wall) |
245 | Supplying all materials, labour, T&P and cutting hole in R.C.C floors, roofs, etc upto 19 cm thickfor passing G.I. Pipes / P.V.C pipes and fittings etc and repairing the holes afterinsertion of pipes etc with cement concrete (1:2:4 ) including finishing complete so as to make it leak proof as per direction of theEngineer-in-charge. (250 mm thick wall) |
246 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages as per direction of the Engineer-in-charge. |
247 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials complete as per specification and direction of the Engineer-in-charge. |
248 | Supplying all materials, labour, T&P and fixing standard sized Two wayBib cock ofHindware/Jaquar/Parryware or equivalent of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification complete as per direction of Er-in-charge. 15mm dia CP Two waybib cock with Flange JAQUAR-OPP-15041PM |
249 | Supplying all materials, labour, T&P and fixing standard sizedBib cock ofHindware/Jaquar/Parryware or equivalentof approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification complete as per direction of Er-in-charge.15mm dia. nominal bore Long body Bib Cock JAQUAR-OPP-15037PM. |
250 | Supplying all materials, labour, T&P and fixing standard sized15mm dia angular Stop cock of Hindware/Jaquar/Parryware or equivalent of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification complete as per direction of Er-in-charge. 15mm dia CP angle stop cock with wall flange JAQUAR-OPP-15053PM. |
251 | Supplying all materials, labour, T&P and fixing standard sized pillar cock of Hindware/Jaquar/Parryware or equivalent of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 15mm dia brass pillar cock JAQUAR-OPP-15001PM. |
252 | Supplying all materials, labour, T&P and fixing100 mm dia wall mounted over head shower& Shower armHindware/Jaquar/Parryware or equivalent including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineer-in-charge. 100 mm dia CP overhead shower with Arm (JAQUAR-OHS-1999,JAQUAR SHA- 483) |
253 | Supplying all materials, labour, T&P and fixing standard sized15mm dia Concealed Stop cock of Hindware/Jaquar/Parryware or equivalent of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification complete as per direction of Er-in-charge. Concealed stop cock JAQUAR-15083KPM |
254 | Fixing of 25mm dia Bronze Ball Valve confirming toIS : 781-1995 of approved makeas per specification complete as per direction of Er-in-charge.25mm dia Bronze Ball Valve Screwed (Zooloto/Shakti or equivalent) Zooloto- HSN-84818090 |
255 | Fixing of 40mm dia Brass / Gun meta ball Valve confirming toIS : 781-1995 ofof approved makeas per specification complete as per direction of Er-in-charge. 40 mm dia Bronze Ball Valve Screwed (Zooloto/Shakti,or equivalent) HSN-84818090 |
256 | 15mm dia PVC connection pipe 450 mm long |
257 | 15mm dia CP Extention Nipple |
258 | Providing and fixingcircular type stainless steeljalli (grating) with hole for floor /nahani trap etc complete as per specification and direction of the Engineer in charge. |
259 | Supplying all materials, labour, T&P and fixing Health Faucet of Hindware/Jaquar/Parryware or equivalent complete with Chromium plated brass brackets fixed to wooden plugs with Chromium plated brass screws as per specification and direction of theEngineer-In-Charge. (15mm dia CP Health Faucet of Jaquar 1.2Mtr long, 8MM diaJAQUAR ALD-579) |
260 | Supplying all materials, labour, T&P and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming toincluding cutting holes through the tank and fixing mild steel ltubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting up to a height of 5 meters above ground level and placing the tank to the required position and providing 1st class K.B.Brick work in cement mortar (1:6) of 0.46mt. height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C.slab of size 1.60mt.x1.60mt. and 0.10mt. thick, R.C.C.beam of 0.25mt.x0.30mt. and 2.60mt. average length in cement concrete (1:2:4) using 12mm size h.g.chips including centering and shuttering, watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of theEngineer-In-Charge. 2000 litre capacity water storage tanksin 1st. floor.(Sintex-3layer White or equivalent) |
261 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer"s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer-In-Charge. |
262 | 110mm diameter U-PVC SWR pipes(Astral / Oriplast / Supreme-type-A) |
263 | 110mm U-PVCdoor Tee |
264 | 110mm U-PVC offset |
265 | 110mm U-PVCdoor bend |
266 | 110mm U-PVCplain shoe bend |
267 | 110mm U-PVCvent cowl |
268 | 110mm P-trap |
269 | 110mm U-PVCplain bend |
270 | Supplying all materials,labour T&P and cutting holels through existing brick or laterite masonry wall for taking H.C.I pipes and fittings including making good the damages etc. all complete as per P.H.Specification and direction of theEngineer-In-Charge.(250mm to 375mm thick wall) |
271 | Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern of Hindware/ Jaquar/ Parryware or equivalent with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main etc all complete as per the specification and direction of the Engineer-in-charge. Jaquar- JCS-WHT-2400 |
272 | Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) of Hindware/ Jaquar/ Parryware or equivalent duly embedded in cement concrete (1:4:8) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI "p" or "s" trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages etc all complete as per specification and direction of theEngineer-In-Charge. (Jaquar Orissa Pan, Size- 53x41 cm) |
273 | Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet (wall hung European type W.C. pan) of Hindware/Jaquar/Parryware or equivalent with integral "p" or "s" trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of theEngineer-In-Charge. EWC with "P"/S trap plain JAQUAR-OPS-WHT-15955P180UFSM,size-370x580x430 mm. |
274 | Supplying all materials, labour T&P and fixing Half Pedestal wash basins of Hindware/Jaquar/Parryware or equivalent with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered "Hot" and "Cold" with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of theEngineer-In-Charge. JAQUAR Continental Wash Basin Size: 560x415x200 mm, CNS-WHT-801, CNS-WHT-305, Half Pedestal |
275 | Supplying all materials, labour T&P and fixing Under Counter wash basins of Hindware/Jaquar/Parryware or equivalent with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered "Hot" and "Cold" with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of theEngineer-In-Charge. CNS-WHT-705 Under Counter Basin with Fixing Accessories, Size: 605x430x200 mm, Shape: Oval |
276 | Supplying all materials, labour, T&P and fixing bowl pattern urinal make Hindware/Jaquar/Parryware or equivalent including connecting the urinal with waste pipe by means of white lead mixed with chopped hemp etc all complete as per specification and direction of the Engineer in charge. |
277 | Half stall Urinal -JAQUAR-URS-WHT-13261 |
278 | 32mm dia CP dome waste |
279 | Cost of 15mm dia urinal spreader |
280 | Cost of Urinal Partion |
281 | Supplying all materials, labour, T&P and fixing glazed earthenware squatting plate of size 600mmx350mm with integral longitudinal flushing pipe including embedding the plate in 25mm cement mortar (1:8) laid over 150mm cement concrete (1:5:10) using 40mm hard granite metal all complete as per specification and direction of the Engineer in charge.Fixing of squatting urinal |
282 | Supplyiny & Fixing ofBrandede I.S Matrix Set -1 (WB 65 x 35 with one pair mounting brackets, EWC & Cistern complete with fittings & seat cover, one no hinged rail 76 cm and five No of grab rails 60 cm) (JAQUAR/Hindware/Parryware or equivalent) Cat- 70002 |
283 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm thick A.C.sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the Engineer-in-charge. 600mmx450mm size B.E.mirror (Alpina/Golden fish/Belgion) |
284 | Supplying all materials,labour, T&P and fixing standard sized CP towel rail 24" of Hindware/Jaquar/Parryware complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer-In-Charge.25mmx600mm long CP towel Rail JAQUAR-AKP-35711PS |
285 | Supplying all materials, labour, T&P and fixing standard sized Chromium Plated soap case ofHindware/Jaquar/Parryware complete with Chromium Plated brassbrackets fixed to wooden plugs with Chromium Plated brass screws as per specification and direction of the Engineer in charge.CP soap holder JAQUAR-AKP-35731P |
286 | Supplying all materials, labour, T&P and fixing standard sized Robe Hook ofHindware/Jaquar/Parryware complete with all as per specification and direction of the Engineer in charge. JAQUAR-AQN-7791 |
287 | Supplying all materials, labour, T&P and fixing standard sized Soap Dispensor ofHindware/Jaquar/Parryware complete with all as per specification and direction of the Engineer in charge. Soap dispense with Glass Bottle. JAQUAR-AKP-35735P |
288 | Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) Pure Chill 120 PSS UV of size 750x570x1350mm height with water storage capacity 120 liters along with 3 No of faucets 2for cold water and 1 for normal water including a flow of 1.5 ltr per minute etc all completeas per approved drawing,specification and direction of the Engineer-In-charge. (a)Aquagurd Pure Chill 120 PSS UV |
289 | EXTERNAL P.H. & SANITARY WORK Supplying all materials, labour, T & P and constructing Gully trap chamber of the following inside size with 8 cm thick R.C.C. precast cover slab in CC (1:2:4) mix using 12mm size h.g. chips, foundation concrete (1:4:8) using 40mm size h.g. metal on bed aound trap , Fly Ash brickwork in CM (1:6) in P&F and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mm x100mm size gully trap, 150mm x150mm C.I gratig etc. all complete as per aproved drawing, specification and direction of Engineer-in-charge. (Inside Size 250mmx250mm with cover) |
290 | Supplying all materials, labour, T & P and constructing Inspection chamber of the following inside size with CC (1:3:6) mix using 40mm size h.g. metal on bed, Ist class Fly Ash brickwork in CM (1:6) , moulding and shaping the channel inside and benching with CC (1:2:4) using 12mm size h.g. chips, 12mm thick cement plastering (1:3) finished with punning to inside , cement flush pointing (1:3) to outside , R.C.C. cover slab in (1:2:4) using 12mm size h.g. chips with RCC man hole cover , earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering ,curing, conveyance of all materials to worksite , payment of royality , taxesetc. all complete as per aproved drawing , specification and direction of Engineer-in-charge. (Inside size 760mm x760mm x450mm with Cover) |
291 | Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class-3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasingincluding concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer-in-charge. |
292 | 110 mm dia U-PVC alround concrete |
293 | 160 mm dia U-PVC alround concrete |
294 | Supplying all materials, labour, T&P and constructing Man hole chamber of the following size withcement concrete (1:3:6) using 40 mm size HG metal on bed , !st class Fly Ash Brick work in CM (1:6) moulding and shaping the channel inside and benching with CC (1:2:4) mix using 12 mm size H.G chips,12 mm thick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside ,RCC cover slab in (1:2:4) mix using 12 mm size H.G chips with SFRC Manhole Cover , earth work in all kinds of soil and refilling the cavity around the camber including watering, curing, conveyance of all materials to worksitepaymentof royalty, taxes etc. all completed as per approved drawing, specification and direction of Engineer-in-charge. |
295 | Inside size 900mmx900mmx900mm |
296 | addl depth of 0.30m upto 4.50m depth |
297 | CIVIL WORK.(UGR,OHR,SEPTIC TANK, DRAIN) Excavation of foundation in stoney earth and gravels mixed with stone and boulder not exceeding 0.014 cum in vol. within 50m. Initial lead 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layer not exceeding 0.3 in depth and as per specification approved by the department. |
298 | Excavation of founation in hard rock (granite) removed by chiselling including dressing and levelling the bed not exceeding 1.5m in depth and depositing the soil within initial lead of 50m and as per specification approved by the Department |
299 | Filling at all depth with available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 15cm in depth : consolidating Each deposited layer by ramming and watering complete (lead upto 100m) as directed by the Engineer-In-charge. |
300 | Supplying and filling sand in foundation and over areas including watering, ramming, consolidating and dressing, labours, tools, taxes etc. all complete as per the specification and direction ofEngineer-In-charge |
301 | Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand : 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curring, shuttering etc. complete all depth and height. |
302 | Providing and laying plain cement concrete 1:3:6 (1 cement: 3 sand : 6 stoneaggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curring, shuttering etc. complete all depth and height. |
303 | Providing, lifting, hoisting and laying Reinforced cement concrete of M-25 grade as per approved designs and drawings having a minimum compressive strength (in work test) 25 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed andcleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portlandslag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position. |
304 | Footing/Base |
305 | R.C.C Wall |
306 | R.C.C. Slab |
307 | Tie Beam |
308 | Column |
309 | Roof Beam |
310 | Supplying, straightening, cutting, bending, placing in position and binding reinforcement steel work in RCC/reinforced brick works as per drawing and specification including preparation of respective bar bending schedule and binding (Binding wire to be used as per the IS code) etc. all complete as per direction of Engineer-In-Charge.Cold Twisted bars, Thermo-Mechanically-treated bars. |
311 | 12mm cement plaster on internal smooth side of RCC/brick surfaces with cement mortar of mix 1:4 (1 cement : 4 fine sand) including neat cement punning & necessary scaffolding, curing etc. all complete at all floors and all heights. |
312 | First class Fly ash Brick masonry usingbricks of size 25cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Super stracture including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-In-Charge. |
313 | 12mm cement plaster on external RCC/brick surfaces incement plaster 1:6(1 cement : 6 coarse sand) including necessary scaffolding, curing etc. all complete at all floors and all heights. |
314 | 16mm cement plaster on internal smooth side of RCC/brick surfaces with cement mortar of mix 1:6 (1 cement : 6 fine sand) including necessary scaffolding, curing etc. all complete at all floors and all heights. |
315 | 6 mm cement plaster on internal smooth side of RCC/brick surfaces with cement mortar of mix 1:4 (1 cement : 4fine sand) including necessary scaffolding, curing etc. all complete at all floors and all heights. |
316 | Providing and fixing Steel work welded in built up section/framed (including M.S. angle,plate, sq.bar, flat, m.s.tubular section, Heavy type hinges) work incuding cutting, hoisting, fixing in position and applying apriming coat of approved steel primer, two or more coats of synthetic enamel paint with approved make and brand in grating, frames, guard bar, ladder, railings for balconies and straircase, brackets, gates and similar works as per direction of Engineer-In-Charge. (All structural steel contractor"s own supply). |
317 | Providing & Applying priming coat with Cementbase primer of approved brand and manufacture onplaster/putty surface as per the instruction of Engineer-In-Charge at all elevations and all heights including all material & labour complete. |
318 | Providing and applying to outside walls with two or more coats ofAnti-Fungal Weather coat water proofing paint including scaffolding and cleaning the surface before application of approved colour and manufacture as per specification, instruction of Engineer-in-charge at all elevations including all material labour complete. in all floors and all heights. |
319 | Providing & painting Two coats of Distempering paint with 1st quality oil bound washable distemper of approved brand and manufacturer to give an even shade as per the instruction of Engineer-In-Charge at all elevations including all material & labour complete. |
320 | Providing & Painting with Two Coat synthetic enamel paint ovewr a coat of primer of approved brand and manufacture to give an even shade as per the instruction of Engineer - In-Charge at all floors and all heights including all material & labour complete. |
321 | Septic Tank Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls ofman hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge. |
322 | Supplying all materials, labour, T&P and laying in trenches ( to level or slope ) and jointing with provision of stiff mixture of cement mortar in proportion of 1:1 for salt glazed stoneware pipes, Grade-A of the following internal diameters including testing of pipes and joints complete. 110mm diameter UPCpipe |
323 | Supplying all materials, labour, T&P and constructing soakway pit of the following size with precast RCC rings joined loose, gravel backing in the rear of well steining, precast RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including cutting hole in the rings for inlet pipe,earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer-In-Charge. RCC rings soakway pit 1.2m dia x 2.0m deep |
324 | SFRD COVER 900 MM DIA |
325 | BOREWELL Sinking of 200mm x 150mm size Tube well through fast drilling Combination rigs (1No) Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rigs with its accessories, tools and plant and consumables etc for lowering of 125mm dia G.I/P.V.C pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well) Drilling of 200mm x 150mm dia bore.00 Mtr to 140Mtr . |
326 | Lowering the following size of G.I/P.V.C pipes with or without slotted pipes as per the necessity from ground level up to 30.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above.Lowering of 200mm dia P.V.C casing pipes00 Mtr to 40 Mtrs 1x 70.00 |
327 | Cost of 200mm dia ASTMD-1785/89 sch-80 pvc pipe1x 70.00 |
328 | Cleaning and developing the tube well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per the direction of Engineer-in-Charge. |
329 | Supplying all materials, labour, T&P and constructingBore well protectionchamber of the inside size 650x650x1000hightwith cement concrete (1:3:6) using 40mm size hard granite metal on foundation, 1st class Fly ashbrickwork in cement mortar (1:3), with base cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:4)inside and outside, R.C.C cover slab in (1:1.5:3) using 12mm size h.g chips, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge. |
330 | Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge 1 .5 H.P three phase 3 stage head range 30 to 54 metres, discharge 155 to 110 L.M.P with outlet dia of 32mm |
331 | 5.0 HP Verticalsubmerssible pump motor |
332 | 10.0 HP Horizental submerssible pump motor(Kirloskar KOS-1065) |
333 | DOL Control panel suitable for the above pomps. |
334 | 40mm dia steel short piece |
335 | Well cap |
336 | 50mm size CI bracket |
337 | 2.50sqmm flat cable |
338 | 20mm dia rigid UPVC pipes |
339 | Steel rope with cover |
340 | 40mm dia HDPE pipe |
341 | Labour charges for lowering including transportation |
342 | INTERNAL ELECTRICAL WORK. INTERNAL WIRING. Recessed wiring to light point / first light of group control/ call bell point/ exhaust fan point /wall fan point with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVCconduit with 6 Amp, 250 V clip in type switch ISI marked and ceiling rose ISI marked mounted on G.I modular box with face plate & cover of suitable size ,with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge.Group C |
343 | Recessed wiring to secondary light pointlooped from primary light point with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVCconduitwith 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor for running earth including3 plate ISI marked Ceiling rose with all accessories & connection as per direction of Engineer in charge.Average Length: 3Mtr |
344 | Recessed wiring to ceiling fan point with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVCconduit with 6Amp 250V Modular Switch,Stepped type Moudular Regulator, Base & Cover with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor for running earth including all accessories & connection as per direction of Engineer in charge. |
345 | Recessed wiringfor 5 / 6 amp socket outletwith6Amp, 250 V clip in type modular switch ISI markedmounted on G.I moular box with face plate & cover of suitable sizeincluding all accesories and connection on same switch board as per direction of Engineer in Charge. |
346 | Recessed wiringfor 5 / 6 amp socket outlet with 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVCconduit with 6Amp, 250 V clip in type switch ISI markedmounted on G.I moular box with face plate & cover of suitable size ,with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection on separate board as per direction of Engineer in Charge. |
347 | Recessed wiringfor2 x 6 amp socket outlet controlled by 2 No6Amp, 250 V clip in type switch ISI markedmounted on single G.I moular box with face plate & cover of suitable sizeincluding all accesories and connection on separate board as per direction of Engineer in Charge. |
348 | Recessed wiringfor 6 pin 16 amp socket outletwith 16Amp, 250 V clip in type switch ISI markedmounted on G.I moular box with face plate & cover of suitable sizeincluding all accesories and connection as per direction of Engineer in Charge. |
349 | Recessed wiringfor A.Csocket outletwith 20 amp SPN, industrial type socket outlet, with plug top and metal chained cover in sheet steel enclosure indusrial socket ,20A SP MCBincluding all accesories and connection as per direction of Engineer in Charge. |
350 | SUBMAIN. Recessed wiring to submain in 4 x 10 sq.mmFR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 40 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 2 x 6 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. |
351 | Recessed wiring to submain in 2 x 6 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 25 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 4.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. |
352 | Recessed wiring to submain in 2 x 4 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. |
353 | Recessed wiring to submain in 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. |
354 | Recessed wiring to submain in 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. |
355 | DISTRIBUTION BOARD Supply and fixing of following way three pole and neutral, sheet steel, MCB distribution, 415 V on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB knobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as requiredor equievalant. |
356 | 4 way (4 + 12) TPN double doorhorizontal type |
357 | 6 way (4 + 18 ), TPN , MCB DB double doorhorizontal type |
358 | Supply and fixing of single pole MCB with sheet steel enclosure, distribution board, on surface /recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, phosphate and powder painted including earthing etc. as required . |
359 | 12 way SPN , MCB DB double door |
360 | 8 way SPN , MCB DB double door |
361 | Supply and fixing of following rating 240 V Minature Circuit Breaker (MCB) having a sensitivity current up to 10kA in the existing MCB DB ISI marked complete with connection testing and commissioning etc as required. |
362 | 6 amp to 32 amp rating SP MCB , "c" series, 10KA breaking capacity |
363 | Supply and fixing of following rating 240 V Residual Current Breaker with Overcurrent protection (RCBO) having a sensitivity current up to 100mA in the existing MCB DB ISI marked complete with connection testing and commissioning etc as required. |
364 | 25 to 40 amp rating DP RCBO, 30mA |
365 | 32 amp rating FP RCBO, 30mA |
366 | 40 amp rating FP RCBO, 100/300 mA |
367 | CABLE Supplyof one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of following sizes of cable as required. 3.5 C x 300 sq.mm Al |
368 | 3.5 C x 50 sq.mm Al |
369 | 3.5 C x 35 sq.mm Al |
370 | 4 C x 16 sq.mm Al |
371 | 4 C x 10 sq.mm Al |
372 | 2 C x 6 sq.mm Al |
373 | 3 C x 4 sq.mm CU. |
374 | Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade ofsize exceeding 25 sq.mm but not exceeding 400 sq.mm in the existing RCC/HUME/STONEWARE/METAL pipe as required. |
375 | Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm direct in ground in the existing RCC/HUME/STONEWARE/METAL pipe as required. |
376 | Laying and fixing of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of size exceeding 120 sq.mm but not exceeding 400 sq.mm on surface as required. |
377 | Laying and fixing of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm on surface as required. |
378 | Laying and fixing of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm on surface as required. |
379 | Providing and fixing in position of the 63/75mm (ID/OD) size dia heavy duty HDPE DWC pipe as per IS, directly burried in ground in all soil type. Including cutting, bending , jointing with approved coupler. Excavation & backfilling of trenches, making the surface goodas per good engineering practiceafterburryingonlayingcablethroughthepipe,completeinallrespect,including waterproof sealing of pipes after laying of cables with sealant/cap at both the end. Complete as required. |
380 | Providing and fixing in position of the 103/120mm (ID/OD) size dia heavy duty HDPE DWC pipe as perIS,directlyburriedin groundin all soiltype.Includingcutting,bending, jointingwith approved coupler. Excavation & backfilling of trenches, making the surface goodas per good engineeringpracticeafter burryingon laying cable throughthe pipe, completein all respect, includingwaterproofsealingof pipesafterlayingof cableswith sealant/capat boththe end. Complete as required. |
381 | Supplying and fixing ofof 50mm G.I pipe(Medium Class) along with accessories ingroundincluding cutting & making good the sameas required. |
382 | END TERMINATION Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed / XLPE aluminum cable of 1.1 KV as required. 3.5 C x 300 sq.mm Al |
383 | 3.5 C x 50 sq.mm Al |
384 | 3.5 C x 35 sq.mm Al |
385 | 4 C x 16 sq.mm Al |
386 | 4 C x 10 sq.mm Al |
387 | 2 C x 6 sq.mm Al |
388 | 3 C x 4 sq.mm CU. |
389 | PANEL Supply, installation,testing & commissioning of floor mounting front operated front access extensible type cubicle panel totally enclosed, dust and vermin proof with Out-Door doubledoor ( (Rear & Front )with hinged and lockabale doors.CRCA sheets including Busbars,interconnections,tinned copper crimping lugs, bonding to earth and painting suitable for use at 415 V, 3phase 4 wire 50 Hz system, and to withstand a fault level of 35KA symmetrical for 1 sec at 415 V complete as per specifications, as required and as below : All switchboards shall have provision for entry of cables from the bottom as required. All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The bus bars shall be insulated with heat shrinkable sleeves.SMC/DMC shrouds and busbar supports shall be used. MAIN PANELwith630A 4P MCCBas incomer,100A 4P MCCB-6No, 63A 4P MCB-4 No,40A 4P MCB-4 No, as Outgoing. |
390 | ZONE-1 PANELwith 100A C/O Switch & 100A 4P MCCBas incomer,40A 4P MCB-4 No32A DP MCB-6 No, 32A DP MCB-with 32A DP Contactor-& Timer-6 No,as Outgoing. |
391 | EARTHING Earthing with G.I. earth plate 600 mm x 600mm x 6 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etcwith charcoal and salt as required. |
392 | Supplying and laying 25 mm x 6 mm G.I earth strip ISI marked at 0.5 meter below ground level as strip earth electrode including soldering etc. as required. |
393 | Supplying and laying 25 mm x 5 mm G.I earth strip ISI marked on surface or in recess for connection etc as required. |
394 | Earthing with G.I earth pipe 3 meter long 40 mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangment and watering pipe etc with charcoal and salt as required |
395 | Providing and fixing 8 SWG (4 mm) dia copper wire on surface or in recess for loop earthing as required. |
396 | Providing and fixing 6 SWG G.I. wire on surface or in recess for loop earthing as required. |
397 | FIXTURE Supply, Installation, Testing and Commissioning of pre-wired fluorescent fiiting / compact fluorescent fitting /LED fitting of all sizes complete with all accessories and lamp etc. directly on ceiling /wall or recessed in false ceiling , including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor and earthing as required. Surface mounted indoor type 20w SINGLE LED TUBELuminaire with LED Lamp. |
398 | Surface mounted indoor type 40W TWIN LED TUBE Luminaire with LED Lamp . |
399 | Surface mounted indoor type 36W 2"x2" SQUARE LED Luminaire with LED Lamp . |
400 | Surface mounted indoor type 12/15W ROUND LED Luminaire with LED Lamp |
401 | Surface mounted indoor type 18w SQUARE LED Luminaire with LED Lamp. |
402 | Surface mounted indoortype 10W BULK HEADLED Luminaire with LED Lamp . |
403 | SITC of out door type wall mounting12W WALL WASHER LIGHT with LED Lamp . |
404 | SITC of outdoor type 12w Spike LIGHT with LED Lamp . |
405 | SITC of outdoor type IP65 70W Flood LIGHT with LED Lamp. |
406 | SITC of IP54 15W Surfaced Spot LIGHT with LED Lamp . |
407 | SITC of out door type wall mounting IP67 STEP LIGHT with LED Lamp . |
408 | SITC of outdoor type IP65 75WStrip LED LIGHT with LED Driver. |
409 | Supply , fixing& termination of40w POST TOP LED LIGHT complete with cover, GI pipe bracket, necessary wiring from loop-in-box with 3Cx1.5 sqmm copper wires inside PVC pipes etc complete as required with all materials . |
410 | 3Meterlong decorative polesuitablefor40w post top led light |
411 | Supply &fixing of IP65 Decorative 10W Bollard LED FixtureWith Die Casted and extruded Aluminum Body & poly carbonate OpalDiffuser 600mm height suitable for LED LAMP. |
412 | SITC of outdoor type IP66 Weather Proof Cable Junction Box (155x210x92)with knockouts for cable entry . |
413 | Supply, Installation, Testing and Commissioning of ceiling fan 1200mm sweep, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc. as required. |
414 | Supply, Installation, testing and commissioning of exhaust fan of 300 mm sweep 900 rpm in the existing opening, including making the hole to suit the size of the above fan, making good the damage complete, connection, etcas required. |
415 | EXTERNAL LIGHT 7M long G.I.tubular pole complete with RCC foundation, required G.I base plate , single-arm of ERW galvanised pipe 30mm - 1M length,providingGI pipes for cable entry junction box with prewired 6 Amp SP MCB, loop-in -loop-out , terminal block, wiring with copper wire upto the fitting etc. complete |
416 | 7M long G.I.tubula pole complete with RCC foundation, required G.I base plate , Double-arm of ERW galvanised pipe 30mm - 1M length,providingGI pipes for cable entry junction box with prewired 6 Amp SP MCB, loop-in -loop-out , terminal block, wiring with copper wire upto the fitting etc. complete |
417 | Supply , fixing& termination of Outdoor type IP66Street Light LEDLuminaire with 90w LED Lamp . |
418 | 4M long G.I.tubular pole complete with RCC foundation, required G.I base plate , single-arm of ERW galvanised pipe 30mm - 1M length,providingGI pipes for cable entry junction box with prewired 6 Amp SP MCB, loop-in -loop-out , terminal block, wiring with copper wire upto the fitting etc. complete |
419 | Supply , fixing& termination of Outdoor type IP66Street Light LEDLuminaire with 45w LED Lamp . |
420 | Supply , Installation , Testing and commissioning ofsingle phase 32AElectric Vehicle charging socket with bracket, mounting box as required. |
421 | Supply, delivery, errection, testing and commissioning of 13.5Mtr High Mast consists of 6No 1 x 150 w LED fittings complete with all mechanical accessories including motorised winch, head frame, carriage ring. the winch shall be double drum, 5 No wire ropes( 6mm) , hot dipped galvanised, complete with all foundation accesories likefoundation bolts, anchor plates, lightening arrestor, aviation light .the electricalaccessories include 2.5sqmm x5 core cable, timer panelwith 32 amp 4P MCB along with 65KA SPD 4No., motor2 h.p.(kirloskar /gec /elgi/-crompton) and associated starter.complete as required and as per the direction of Engineer-in-charge. |
422 | Supply, delivery & installation of GI coil earthing made out of 8 swg GI wire closely wound in shape of a helical coil of 50mm diameter with 115 numbers of turns including excavation of earthpit of size 800x 800x 1500mm in all kinds of soil, back filling the excavated pit with alternate layers of salt, charcoal around the coil with a diameter of 300mm upto 1000mm and balance by good quality soil, end termination complete as required. |
423 | Supplying and fixing ofof 50mm G.I pipe(Medium Class) along with accessories ingroundincluding cutting & making good the sameas required. |
424 | Supply, delivery, errection, testing and commissioning of 7Mtr Mini High Mast consists of 4No 1 x 100 w LED fittings complete with all mechanical accessories including motorised winch, head frame, carriage ring. the winch shall be double drum, 5 No wire ropes( 6mm) , hot dipped galvanised, complete with all foundation accesories likefoundation bolts, anchor plates, lightening arrestor, aviation light .the electricalaccessories complete as required and as per the direction of Engineer-in-charge. |
425 | LIGHTNING ARRESTOR Providing and fixing of lightning conductor finial made of 25mm dia 300 mm long, copper tube,having single prong at top,with 85mm dia 3 mm thick copper base plate including holes etc. complete asrequired |
426 | Providing and fixing of G.I. tape 20 mm x 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For horizontal run) |
427 | Providing and fixing of G.I. tape 20 mm x 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For vertical run) |
428 | Providing and fixing of testing joint, made of 20 mm x 3 mm thick G.I. strip, 125 long with 4 No of G.I. bolts, check nuts and spring washer etc complete as required. |
429 | Reveting, sweating and soldering of copper / G.I. tape ( with another copper / G.I. tape, base of the finial or any other metallic object) as required |
430 | Providing and laying of G.I. tape 32 mm x 6 mm from earth electrode directly in ground as required. |
431 | Earthing with GI earth plate 600 mm x 600mm x 6 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc with charcoal and salt as required. |
432 | DIESEL GENERATOR Supply, Transport,erection, testing and commissioning of Diesel Generating set of capacity 62.5 KVA with all the regular standard system accessories as mentioned in the detailed DG specifications, Electronic governerstarting system, complete cooling system with radiator/fans, thermostat cooling fan, residential silencer, diesel tanksets, AMF panel etc as per all details specifications and acoustic enclosure including civil foundation as required. |
433 | EXTERNAL ELECTRICAL WORK TRANSFORMERSET 11KV OH Line Supply of all materials, labour and construction of 3ph 3w 11-KV overhead line from tapping point of TPSODL with 9Mtr long 100x116mm RS Joist pole (200 ISMB) ,80 sqmm AAAC conductor complete with required insulators, cross arms, stays, struts, guarding complete as per site requirement and direction of Engineer-in-charge. average span 60Mtr. |
434 | 11/0.4KV 500KVA Outdoor S/S Construction of 11KV DP Structurewith 2No 9 Mtr long 150x150mm RS joist pole with Cross arm bracings of 75X 40mm MS Channels , clamps , insulators, 12KV Lightning Arrestors, 400A AB switch , Earthing Switch , 400A HG Fuse , Guy Sets , Danger Boards , Painting with 2 coats of red oxide primer & 2 coats of aluminium paint , accessories , fittings, hardwares etc. as required with Trivector Meter complete with C.T & P.T along with T.P Box . |
435 | Supply, delivery, installation, testing and commissioning of plinth mounted substation with energy efficient low loss 500-KVA, 11/0.433 KV Copper wound ONAN DY11 transformer complete including first filling of transformer oil. & fitting /fixtures as per detail technical specification.The transformer shall have the losses equal to the losses of a 3star rating transformer as per ECBC with barricade. |
436 | Earthing Earthing with G.I earth pipe 3 meter long 40 mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangment and watering pipe etc with charcoal and salt as required |
437 | Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc (But with out charcoal and salt) as required. |
438 | Earthing with GI earth plate 600 mm x 600mm x 6 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc with out charcoal and salt as required. |
439 | Extra for using salt and charcoal for G.I or copper plate earth as required |
440 | Providing and fixing 25 mm x 5 mm Copper strip in 40 mm dia G.I. pipe from earth electrode as required. |
441 | Supplying and laying 25 mm x 5 mm copper strip on surface or in recess for connection etc as required. |
442 | Supplying and laying 25 mm x 6 mm G.I earth strip ISI marked at 0.5 meter below ground level as strip earth electrode including soldering etc. as required. |
443 | Supplying and laying 25 mm x 5 mm G.I earth strip ISI marked on surface or in recess for connection etc as required. |
444 | Panel Supply, installation,testing & commissioning of floor mounting front operated front access extensible type cubicle panel totally enclosed, dust and vermin proof with Out-Door doubledoor ( (Rear & Front )with hinged and lockabale doors.CRCA sheets including Busbars,interconnections,tinned copper crimping lugs, bonding to earth and painting suitable for use at 415 V, 3phase 4 wire 50 Hz system, and to withstand a fault level of 50KA symmetrical for 1 sec at 415 V complete as per specifications, as required and as below : All switchboards shall have provision for entry of cables from the bottom as required. All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The bus bars shall be insulated with heat shrinkable sleeves.SMC/DMC shrouds and busbar supports shall be used. Substation Panel |
445 | Cable Supplyof one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of 3.5 C x 300 sq.mm Al as required. |
446 | Supply of materials and end termination of 3.5 C x 300 sq.mm Al cable including supply of single compression brass cable glands, cable sockets etc complete as required and as per direction of Engineer-in-charge. |
447 | Civil Works Construction of cable trench of size [30.0m(L) x 450mm(W) x 750mm(D)] complete including base foundation, 250mm brick walls, filling the inside area with sand, RCC slab on the top, wall and top plastering etc complete as required |
448 | Supply and spreading of course river sand up to a height of 75-mm over the substation complete |
449 | Supply and spreading of 40-mm down hard granite metal up to a height of 150-mm over the substation complete |
450 | Construction of Man hole chamber for cable pulling / crossing of size [ 600mm(W) x 900mm(L) x 750mm(D)] complete including with suitable size of Hume pipe, base foundation with C.C 1:3:6, 250mm brick walls,filling the inside area with sand, removableRCC slab for chambers with C.C 1:2:4 on the top, wall and top plastering etc complete as required. |
451 | Supply and laying of 150-mm dia PVC pipe to be laid underground for laying of cable etc complete as required and as per direction of Engineer-in-charge. |
452 | Supplying and fixing ofof 50mm G.I pipe(Medium Class) along with accessories ingroundincluding cutting & making good the sameas required. |
453 | SAFETY EQUIPMENTS Supply and installation of Rubber Mats 12mm thick of size 2000mm x 1000mm x 12 mm thick Electrical tested with test certificate. |
454 | Supply and fixing of fire buckets with angular fabricated stand to fix 4 buckets in Each stand for Electrical fire protection as per standards of Electrical Inspectorate. |
455 | Supply and fixing of Co2 fire extinguisher with mounting clamps with pressure test certificate . |
456 | Supply and fixing of shock treatement charts duly laminated along with separate colour single line diagram laminated, to be fixed in Electrical control panel room. |
457 | Supply and handing over 11KV Tested Rubber hand gloves to be used on LT supply with Test certificate. |
458 | Supply and fixing of first aid box with medicines complete with medicine with three years expiry date to be fixed in Electrical control panel room. |
459 | CCTV & P.A SYSTEM IP based CCTV Surveillance system Supply , Installation, testing , commissioningof 2.0 MP IP Dome Camera: 1/2.8" Progressive CMOS, ICR, Color: 0.028 Lux @(F2.0; AGC ON), 0lux with IR, 1920x1080:25fps(P)/30fps(N),H.265+/ H.265/H.264/MJPEG, DC12V & PoE, 3D DNR, BLC, HLC, IR range: up to 30m, 2.8 mm: horizontal FOV: 103°, vertical FOV: 62°, diagonal FOV: 118° 4 mm: horizontal FOV: 90°, vertical FOV: 48°, diagonal FOV: 109° General Function: Anti-flicker, heartbeat, mirror, password protection, privacy mask, watermark, IP address filter, |
460 | Supply , Installation, testing , commissioningof 2.0 MP IP Bullet Camera : 1/2.8" Progressive CMOS, ICR, Color: 0.028 Lux @(F2.0; AGC ON), 0lux with IR, 1920x1080:25fps(P)/30fps(N), H.265+/H.265/H. 264/MJPEG, DC12V & PoE, WDR, 3D DNR, BLC, HLC, IR range: up to 40mSupport on-board storage (SD card not included),fov: 2.8 mm, horizontal FOV: 114°, vertical FOV: 62°, diagonal FOV: 136° 4 mm, horizontal FOV: 86°, vertical FOV: 46°, diagonal FOV: 102° Alarm Trigger: Motion detection, video tampering, network disconnected, IP address conflict, illegal login, General Function :One-key reset, anti-flicker, heartbeat, mirror, password protection, privacy mask, watermark, |
461 | Supply , Installation, testing , commissioningof 5.0 MP IP Bullet Camera1/2.8" Progressive CMOS, ICR, Color: 0.028 Lux @(F2.0; AGC ON), 0lux with IR, H.265+/H.265/H.264/MJPEG, DC12V & PoE, WDR, 3D DNR, BLC, HLC, IR range: up to 40mSupport on-board storage (SD card not included),fov: 2.8 mm, horizontal FOV: 114°, vertical FOV: 62°, diagonal FOV: 136° 4 mm, horizontal FOV: 86°, vertical FOV: 46°, diagonal FOV: 102° Alarm Trigger: Motion detection, video tampering, network disconnected, IP address conflict, illegal login, General Function :One-key reset, anti-flicker, heartbeat, mirror, password protection, privacy mask, watermark, |
462 | Supply , Installation, testing , commissioningof 64 Channel NVR with 8 SATA, HDDsupported to 10TB Each sata; 256 Mbps incoming bandwidth and Raid3.0 |
463 | Supply , Installation, testing , commissioningof 10 TB Special Surveillance Hard Disk |
464 | Supply , Installation, testing , commissioningof 12U wall Rack with cooling fan, power manager and cable manager. |
465 | Supply , Installation, testing , commissioningof 24U rack with Castor Wheels, cable manager, power manager and cooling fans. |
466 | Supply , Installation, testing , commissioningof CAT6 24 Port Toolless Patch Panel Loaded |
467 | Supply , Installation, testing , commissioningof CAT6 Patch Cord 1 Mtr. |
468 | Supply , Installation, testing , commissioningof 24 port 10/100/1000 Mbps, 24 Port Gigabit PoE Switch with 4 SFP Ports and Power budget 370watt. |
469 | Supply , Installation, testing , commissioningof Casing Box for Cameras(as per reputer fabricator supply) |
470 | Supply , Installation, testing , commissioningof 5 Mtrs HDMI Cable |
471 | Supply , Installation, testing , commissioningof 55" Smart LED TV |
472 | Supply , Laying, Testing & commissioningof 12 core SM Armoured Optic Fiber cable in rigid PVC Pipe/Concealed/Casing Caping per running metre of cable used |
473 | Supply , Laying, testing & commissioningof CAT6 cable in rigid PVC Pipe/Concealed/Casing Caping per running metre of cable used |
474 | Supply , Installation, testing , commissioningof 24 Port LIU loaded |
475 | Supply , Installation, testing , commissioningof SC SM Pigtail OS2 9/125 OS2 |
476 | Supply , Installation, testing , commissioningof 3meter SM Patch chord |
477 | Supply , Installation, testing , commissioningof SFP Module |
478 | Supply , Installation, testing , commissioningof Splicing of OFC cable per core(Costum reputed make) |
479 | Supply , Installation, testing , commissioningof 1 KVA online UPS |
480 | A/V EQIPMENT SYSTEM. 6" Coaxial Ceiling speaker without back can enclosure. Mounting kit encloses- for 100v operations. Taps at 30, 15 and 7.5 watt : |
481 | Dual Channel Commercial Sound Power Amplifier, 2 x 430 watts at 4 ohms, 2 x 400 watts at 70V/100V or Low Impedance operation, Compact 2RU Chassis, 230 vac operation. |
482 | 10-Channel Mixing Console, with Max. 4 Mic / 10 Line Inputs (4 mono + 3 stereo), 1 Stereo Bus, 1 AUX (incl. FX), “D-PRE” mic preamps with an inverted Darlington circuit,1-Knob compressors, High-grade effects: SPX with 24 programs,24-bit / 192kHz 2in / 2out USB Audio functions,Works with the iPad (2 or later) through the Apple iPad Camera Connection Kit / Lightning to USB Camera, Adapter, Includes Cubase AI DAW software download version, PAD switch on mono inputs,+48V phantom power, XLR balanced outputs, Metal chassis. |
483 | Loudspeaker Cable along with PVC Counduit |
484 | Dual 4" 2-way surface-mount loudspeaker,Frequency Response (-10 dB)- 65Hz - 20kH,Power Handling - 200W Cont. Prog./400W Peak,Sensitivity - 89 dB, 1W/1m. |
485 | Dual Channel Commercial Sound Power Amplifier, 2 x 450 watts at 4 ohms, 70V/100V or Low Impedance operation, Compact 2RU Chassis, 230 vac operation. |
486 | 10-Channel Mixing Console, with Max. 4 Mic / 10 Line Inputs (4 mono + 3 stereo), 1 Stereo Bus, 1 AUX (incl. FX), “D-PRE” mic preamps with an inverted Darlington circuit,1-Knob compressors, High-grade effects: SPX with 24 programs,24-bit / 192kHz 2in / 2out USB Audio functions,Works with the iPad (2 or later) through the Apple iPad Camera Connection Kit / Lightning to USB Camera, Adapter, Includes Cubase AI DAW software download version, PAD switch on mono inputs,+48V phantom power, XLR balanced outputs, Metal chassis. |
487 | Handheld Wireless Mic with Cardiod polar pattern for transmitter,Dynamic microphone with Neodymium magnet , Receiver frequency response 80Hz-18kHz,Receiver RF sensitivity < 1.0 µV,Receiver Image rejection>55dB,Receiver Dyanmic range >95dB and receiverhaving 32 channels possible,Receiver S/N ratio >100dB A,distortion <1 %, Transmitter sensitivity - 3.2 mV/Pa,modulation:+/-40kHz . |
488 | Wireless Lapel Microphonewith omnidirectional polar pattern for transmitter,Condenser microphone element , Squelch- Tone code plus Amplitude,Receiver Type- Synthesized PLL,RF Sensitivity- (12 dB SINAD) less than 1.0uV,Audio Frequency Response- 80 Hz - 18kHz +/- 2dB,Balanced Line Level Output (RMS Adjustable)- 10 - 100mV,Distortion (@ 1 kHz, 40 kHz deviation)- less than 1.0, 0.4 typical%,Dynamic Range greater than 95 dBdB,Power Supply- 12 VDC, 500 mA max Polar Pattern Cardioid,Battery Life 14 Hours . |
489 | Installation,Testing & Commissioning of all the systems . |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail