Indian Oil Corporation Limited-IOCL has published Tender For Miscellaneous Works (Fencing, Cable Tray, Gratings, Structures) Related To New 6000Kl Ms Tank Commissioning At Balasore Depot Under Odisha State Office.. Submission Date for this Tender is 22-03-2023. Cable Tray Tenders in balasore Odisha. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5m in widthas well as 10 sqm on plan) including taking out and disposal of excavated earth within or outside site to unobjectionable place and lift upto 1.5m, as directed by Engineer-in-charge. Disposed earth to be levelled and neatly dressed. Extra for levelling & neatly dressing of disposed soil completely to be paid separately as per item no. MPLCN00600 |
| 2 | i) All kinds of Soil |
| 3 | Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in: |
| 4 | i) 1 Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 5 | Providing and laying cement plaster on surfaces with Coarse sand including curing etc. |
| 6 | vi) 20mm cement plaster of mix 1:6 (1 cement: 6 coarse sand) |
| 7 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade with two or more coats over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
| 8 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement:3 coarse sand) including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm) including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment) (Precast C.C. kerb stone shall be approved by Engineer-in-charge. |
| 9 | Dismantling Steel work in single sections including dismembering and stacking within premises |
| 10 | ii) Channels, angles, tees and flats etc |
| 11 | Demolishing C.C./R.C.C.work by mechanical means and stockpiling at designated locations and disposal of dismantled materials up to a leadof1000 m,stackingserviceableandunserviceable material separately includingcutting reinforcement bars. |
| 12 | Erecting temporary mobile fire screen wall around the place where hot works is carried out using GI sheets or non-flammable asbestos sheets. Payment will be made for total area of sheets provided. The screen needs to be moved from place to place at no extra cost. |
| 13 | Providing and laying in position cement concrete of specified grade excluding cost of centering & shuttering. All work up to plinth level: |
| 14 | iii) 1:2:4(1 Cement : 2 Coarse Sand :4 Graded stone aggregate of 20mm) |
| 15 | v) 1:3:6(1 Cement : 3 Coarse Sand : 6 Graded stone aggregate of 20mm) |
| 16 | Structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 17 | Structural steel work in built up sections/ framed work in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cutting,hoisting,fixing in position & applying a priming coat of approved steel primer etc. as required. |
| 18 | Providing and fixing Klippon Galvalume steel profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) of Cold rolled steel confirming to IS:513-2008 of base metal thickness 0.50 mm, having Yield Stress of Min. 275 MPa. Steel surface shall have hot dip metallic coating of Al-Zinc alloy comprising 55% Alluminium, 43.5% Zinc and 1.5% Silicon as per the ASTM-A792M, with total mass of coating on both sides shall be 150 gms/sqm. The steel shall have organic coating with Silicon Modified Polyester (SMP) /Super Durable Polyester (SDP) paint on continuous coil coating line. The thickness of coating on top side shall be 20-25 Microns (i.e. 15-18 microns SMP /SDP paint over 5-7 microns epoxy primer) and back side 8-10 Microns SMP/SDP paint over epoxy primer. Total Coated Thickness (TCT) shall be 0.58 MM. Sheet shall have protective guard film of thickness of 25 microns minimum to avoid scratches while transportation and should be supplied in single length up to 6m or as desired by Engineer-in-charge. |
| 19 | i) Profile Sheet for roofing |
| 20 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade with two or more coats over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
| 21 | Demolishingcement concrete manually/ by mechanical means including disposal of material outside premises at an unobjectionable place as per direction of Engineer-in-charge. |
| 22 | i) 1:3:6 or richer mix (i/c equivalent design mix) |
| 23 | Demolishing R.C.C. workmanually/ by mechanicalmeans including stacking of steel bars & disposal of unserviceable material outside site to an unobjectionable place as/ direction of Engineer-in-charge |
| 24 | Dismantling Steel work in built up sections in angles, tees, flats channels etc. including all gusset plates, bolts nuts, cutting rivets welding etc. including dismembering and stacking within premises |
| 25 | Local Fine Sand within grading zone IV |
| 26 | Providing and fixing G.I. chain link fabric fencing |
| 27 | Supplying, fabricating and installing following sizes of perforated GI cable trays including tray Cover horizontal and vertical bends, reducers, tees, cross members and other accessories as required and duly suspended from the ceiling and/or fix to steel/RCC columns, beams or any other structure members with MS suspenders, angles, channels, etc complete as per the direction of IndianOil and specifications provided. |
| 28 | i) 50mm x 25mm x 2mm |
| 29 | i) 100mm x 25mm x 2mm |
| 30 | ii) 150mm x 25mm x 2mm |
| 31 | Tray Cover |
| 32 | Supply,laying and installation of cable tray cover with all necessary fittings as per IOCL Specification. |
| 33 | 50 mm |
| 34 | 100 mm |
| 35 | 150 mm |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
