|
| 1 | Laying and Jointing PVC Pipe. Heading |
| 2 | Earth work in excavation in foundation trenches in ordinary soil ( vide classification of soil itemA) and disposal of excavated earth as obtained to a distance upto 50M including all lifts leveling ramming the foundation treanches, removing roots of trees, and shrubs all complete as per approved design, building specification and direction of E/I. |
| 3 | Providing coarse clean sand in filling in in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials labour, royalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume) |
| 4 | Filling in foundation trenches and plinth in layers. Not exceeding 150 mm thick well watered, rammed fully compacted and fine dressed with earth obtained after cutting within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I (Mode of measurement compacted volume) |
| 5 | Providing designation 75A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I. |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size) |
| 7 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) |
| 8 | Providing designation 75B brick work inC.M (1:6 ) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar, joints cost of screening materials raking out joints to 15mm depth , curring , taxes and royalty all complete as per builiding specification and direction of E/I. |
| 9 | Providing designation 75 B brick work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including, providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 10 | Providing designation 125 mm thick reinforced designation 75A brick work in CM (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 25 including the cost of screening, carriage of materials, scaffolding , raking out joints to 15mm depth, curing, taxes and royalty (but excluding the cost of reinforcement) all complete as per building specification and direction of E/I. |
| 11 | Reinforcedcementconcreteworkinbeams,suspendedfloors,roofshaving slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III): 3 graded stone aggregate 20 mm nominal size). |
| 12 | Supplying, and fixing fan hook of 16mm dia M.S. bar 1 meter long bent to required size and shape , placed in position and fixed in R.C.C. slab/beam at the time of casting all complete as per building specification and direction of E/I. (where materials is not supplied by the deptt.) |
| 13 | Supplying, fitting, and fixing M.S. Grill made of 20X6mm M.S. Flate as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I. (where materials is not supplied by the deptt.) |
| 14 | Supplying, fitting and fixing 20 guage G.C.I. Sheet gate fitted on M.S. Angle frame of size 60X60X6mm. Including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I. |
| 15 | Providing 25mm thick first class patent stone flooring (1:2:4) with stone chips in two layers, bottom layers 19mm. Thick (1:2:4)with 12mm to 6mm. Size graded stone chips and top layer 6mm. Thicks (1:2) with 6mm down stone chips, in panels including cost of curing, finishing the surface smooth by rubbing with carborandum stone, taxes and royality with all complete as per building specification and direction of E/I. |
| 16 | Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 17 | Providing 12mm cement plaster (1:3) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 18 | Providing 19mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 19 | Providing 6mm cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 20 | Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I. |
| 21 | Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by the rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors and taxes all complete as per building specification and direction of E/I. |
| 22 | Providing two coats of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper scaffolding , curing and taxes all complete as per building specification and direction of E/I. |
| 23 | providing Tor steel reinforcement of 8mm dia rods as per approved design and drawing exclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (only valid for SAIL & TATA STEEL)8 MM |
| 24 | 10 MM |
| 25 | 12 MM |
| 26 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete |
| 27 | Columns, Pillars, Piers, Abutments, Posts and Struts |
| 28 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 29 | Suspended floors, roofs, landings, balconies and access platform |
| 30 | Supplying of Brick bat with all leads and lifts of water, scaffolding taxes and royality all compete as per building specification and direction of E/I. |
| 31 | Supplying , fitting and fixing viterous white glazed earthen ware I.W.C. of pary Hindustan or any other I.S.S. approved make with 100….all complete as per specification and direction of E/I. |
| 32 | Supplying materials and labours for construction inspection chamber of designation class 75B bricks size 750mm deep, 600 X 450 mm interbal dimention having 250mm wall thickness is cement plaster (1:4) with punning on inside and cement plaster (1:6) with 600 X 475 mm G.I. cover with frame (weight not less than 36 Kg) alongwith earth work in excavation and 80mm thick P.C.C. (1:3:6) in foundation and refilling all complete as per specification and direction of E/I |
| 33 | Providiong and fixing chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply….....complete as per direction of Engineer in Charge.15 mm dia |
| 34 | 20 mm dia |
| 35 | Providing and Fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal St…............Complete as per direction of Engineer in Charge.25 mm dia |
| 36 | 32 mm dia |
| 37 | 50 mm dia |
| 38 | Providing and fixing 15mm size C.P. brass pillar cock (Weight not less than 350 gms.) C.I. body brass spindle pillar cock of approved quality as per specification and direction of E/I. |
| 39 | Providing ad fixing 15mm dia male ended C.I. body brasss spindle valve and seat bib cock of approved quality (wt. not less than 400 gms.0 with extra socket all complete asper specification and direction of E/I. |
| 40 | S/F/F Storage tank PVC ISI mark |
| 41 | S/F/F P.V.C pipe….alll complete as per building specificaton and direction of E/I. |
| 42 | Wiring for light Point/exhaust fan point/call bell point with 1.5 sq. mm. FRPVC insulated copper donductor single core cable in surface/recessed PVC Conduct, with Piano type switch, phenolic laminated sheet, suitable size PVC/G.I. Box etx. As |
| 43 | Twin Control Point wiring in PVC conduit, with modular type switch:-Wiring for Twin control light point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, 2 way modular type switch,modular plate, sutiable size G.I box etc as requried. |
| 44 | Wiring for light/power plug with 2x4 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit along with 1 number 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. |
| 45 | Wiring for circuit / sub main wiring along with earth wire with the following size PVC insulated copper conductor ,single core cable in surface /recessed PVC conduit as requried.2x1.5 sq.mm + 1x1.5 sq.mm earth wire |
| 46 | 2x2.5 sq.mm + 1x2.5 sq.mm earth wire |
| 47 | 2x6 Sqmm + 1x6 sqmm earth wire (For AC) |
| 48 | Supplying and fixing following modular type switch / socket on the existing modular plate and switch box including connections butexcluding modular plate etc as required.15/16 amps,one way switch |
| 49 | 5/6 amps,one way switch |
| 50 | S/F Modular type Electronic Fan Regulator-Supplying and fixing following modular type lectronic Fan Regulator- on the existing modular plate and switch box including connection but exculiding modular plate etc.as requried. |
| 51 | Supply and Fixing Light Plug Point with Modular Type Accessories:-Supply and Fixing GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin, 5/6 amps modular socket outlet and 5/6 amps modular type switch, connection, painting etc as required. |
| 52 | S/F power plug point with piano type accessories :- Supplying and fixing sutiable size G.I. box with modular plate cover in front on surface or in recessed including providing and fixing 6 pin , 15/16 amps modular socket outlet and 15/16 amps modularswitch connection , painting etc, as requried. |
| 53 | S/F celling rose :- Supplying and fixing 3 pin 5 amp. Celling rose on the existing junction box/ wooen block including connection etc. as requried. |
| 54 | S/F Batten holder :-Supplying and fixing battrn / angle holder including connection etc as requried. |
| 55 | MV Cable Laying upto 95 Sq mm in ground:- Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc, as required. |
| 56 | S/F/F/ SLPE insulated armoured cable with complete job.16 Sqmm 2 core |
| 57 | S/F/F/ Celling fan/mountain fan with complete job. |
| 58 | S/F/F/ Exhuest fan with complete job. |
| 59 | S/F/F/ LED Bulb 9/10 wat with complete job. |
| 60 | ITC celling fan :- Installation, testing and commissioningof celling fan, including wiring the down rods of standerd leanth (upto 30 mm) with 1.5 sq.mm FR PVC insulated copper conductor single core cable etc. as requried. |
| 61 | ITC Exhaust fan upto 450 mm. sweep:-Installation of exhaust fan upto 450 mm. sweep in the existing opening, including making the holeto suit the size of the above fan, making good the damage, connection, testing, commissioning etc as required. |
| 62 | Cost of Drilling 125mm X 115mmdia bore well in all kind of soil and roak in rulr or any other area for instalation of pump set with hydraulic DTH rig and aircompressor and equipment------do-----do-----do----all complate job.From 0.00 M to 30.00 M |
| 63 | From 31.00 M to 50.00 M |
| 64 | Supplying all materials labour eqipment for lowering 125 mm doa UPV casing pipe as casing for protecting the sides from during the process f drilling all complete including carrige of materials to work site |
| 65 | Supplying all equipment and labour and doing washing flushing and development of drilling tube well to give clean and clear water all complete job as per direction of E/I |
| 66 | Supplying all materials equipement including 125mm dia G.I. cap and fitting and fixing over the cassing pipe of tube well property and taking it out as per direction of E/I. |
| 67 | Supplying all amaterials labours equipment for construction PCC (1:2:4) DRAIN as per UNICEF design etc all complete including carriage of materials. |
| 68 | Supplying all materials labour equipment for construction of PCC (1:2:4) curcular platform around drilled tube well including 12mm thick cement plaster (1:4) with neat cement punning over exposed surface as per UNICEF design etc all complete including carriage of materials. |
| 69 | Supplying of 125 mm dia ribbed screen pipe conferming to IS 12818:2016 (VML no.. 5543459 latested revision including carriage. |
| 70 | Syupplying fitting and fixing of KSB/KIRLOSKAR/CRI make 2.0 HP submersable pump set having head of 135 mtr. Including all taxes, royalit ect all complete job as per direction of E/I. |
| 71 | Supplying fitting and fixing 3 core 4 sqmm Flat copper bubmersible cable FINOLEX/HAVELS make including ass taxes, royality etc all complete job as per direction of E/I. |
| 72 | Supplying fitting and fixing lowering 50mm dia G.L. column pipe--do----do----do---all complete job as per direction of E/I. |
| 73 | Supplying fully automatic star delta starter to operate induction motor working on 415v, 3 phase, 50 hz with no volt coil, Over load element, ON-OFF push buttons, with necessary materials and connected to supply, etc complete starter with Original sheet steel encloser. |
| 74 | Supplying and Inslation hand Pump set drilling tub well required. |
| 75 | Carriage of MaterialsSandLead 10 Km |
| 76 | Stone Chips Lead 23.5 Km |
| 77 | Bricks Lead 7 Km+1 Km |
| 78 | Stone Metal 22.5 Km |
| 79 | Add. 18% GST |
| 80 | Add. 1% Labour Cess |
