Public Works Department-PWD has published Tender For Construction Of Jawaharlal Nehru Govt. Engineering College At Sundernagar (Sh:- Construction Work At Texile Chemical Processinglab, Repair Ofblock -E , Providing/Fixing Aluminum Partition For Cabins Of Computer Centreblock -Band Providing/Fixin. Submission Date for this Tender is 17-03-2023. Chemical Supply Tenders in Mandi Himachal Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 13-Mar-2023 | Change in EMD | Fee | 17-03-2023 |
| Sl. No. | Item Description |
| 1 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) withinallleads, lifts and carriageofmaterials andotherincidentals . |
| 2 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately)For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) withinallleads, lifts and carriageofmaterials andotherincidentals . |
| 3 | Providingandfixing 12mm thick particle boardin panellingfixed inaluminiumdoors, windwosshuttersand partitionframeswith C.P brass / stainlesssteelscrewsetc.Completreas perarchitectural drawings anddirections of engineer in charge withinallleads, lifts and carriageofmaterials andotherincidentals . |
| 4 | ProvidingandfixingACP ( aluminium compositepanel)sheet ofdesired colourand pattern) in panelingfixing inaluminiumdoors ,windows shuttersandpartitionframes withC.Pbrass /stainlesssteel scres etc. complete as per architectural drawings and direction ofengineer in charge withinallleads, lifts and carriageofmaterials andotherincidentals . |
| 5 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete200x 10 mm ( two hundred x ten millimetre)withinallleads, lifts and carriageofmaterials andotherincidentals . |
| 6 | Providing and fixing aluminium round shape handle of outer dia 100 mm ( one hundred millimetre) with SS screws etc. complete as per direction of Engineer-in- charge Powder coated minimum thickness 50 micron aluminium withinallleads, lifts and carriageofmaterials andotherincidentals . |
| 7 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm ( tento twentyfive millimetre)withinallleads, lifts and carriageofmaterials andotherincidentals . |
| 8 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, inskirting, riser of steps, over 12 mm ( twelve millimetre)thick bed of cement mortar 1:3 (onecement: threecoarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete Size of Tile 600x600 mm(six hundred x six hundred millimetre) withinallleads, lifts and carriageofmaterials andotherincidentals . |
| 9 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. 20 mm( twenty millimetre) dia nominal bore withinallleads, lifts and carriageofmaterials andotherincidentals . |
| 10 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm( fifteen millimetre) nominal borewithinallleads, lifts and carriageofmaterials andotherincidentals . |
| 11 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm ( fifteen millimetre)nominal bore withinallleads, lifts and carriageofmaterials andotherincidentals . |
| 12 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (onecement : twocoarse sand: fourgraded stone aggregate 20 mm (twentymillimetre) nominal size) withinallleads, lifts and carriageofmaterials andotherincidentals . |
| 13 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm ( tenmillimetre) gap for thermal expansion, (i) Single socketed pipes 110 mm (one hundred ten millimetre) diameter withinallleads, lifts and carriageofmaterials andotherincidentals . |
| 14 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm(ten millimetre) gap for thermal expansion - Elbow 110 mm (one hundred ten millimetre)withinallleads, lifts and carriageofmaterials andotherincidentals . |
| 15 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten millimetre) gap for thermal expansion - Coupler 110 mm (one hundred ten millimetre) withinallleads, lifts and carriageofmaterials andotherincidentals . |
| 16 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion - BAT Clamp 110 mm (one hundred ten millimetre)withinallleads, lifts and carriageofmaterials andotherincidentals . |
| 17 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete withinallleads, lifts and carriageofmaterials andotherincidentals . |
| 18 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over . withinallleads, lifts and carriageofmaterials andotherincidentals . |
| 19 | Distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer"s specification withinallleads, lifts and carriageofmaterials andotherincidentals . |
| 20 | Providing and fixing 0.50 mm ( zero point fifty millimetre) thick sheet prepainted steel sheet in ceilingwith hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge withinallleads, lifts and carriageofmaterials andotherincidentals . |
| 21 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item)With frostedglass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm) withinallleads, lifts and carriageofmaterials andotherincidentals . |
| 22 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete 250x16 mm( two hundredfiftyx sixteen millimetre)withinallleads, lifts and carriageofmaterials andotherincidentals . |
| 23 | Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm ( two hundredmillimetre)centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin- charge. (Only weight of grill to be measured for payment).withinallleads, lifts and carriageofmaterials andotherincidentals . |
| 24 | Shiftingofalreadyexistingaluminiumframeworkto suitable locationwithinallleads, lifts and carriageofmaterials andotherincidentals . |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
