Public Works Department-PWD has published Tender For Repair/ Renovation To Minister House, Forest Lodge Shimla-2, (Sh:- Paining, Polishing And Distempering, Renovation Of Kitchen, Toilets, Repair Of Roofing, Repair Of Flooring,Etc.). Submission Date for this Tender is 13-03-2023. Shed Construction Tenders in shimla Himachal Pradesh. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Demolishingcementconcretemanually/bymechanicalmeans including disposal of material within 50 metres lead as per direction of Engineer - in - charge.(i) Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
2 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.(i)For thickness of tiles 10 mm to 25 mm |
3 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
4 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement :3 coarse sand) : 6 graded stone aggregate 40 mm nominal size) |
6 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement :4 coarse sand) |
7 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc. :-Second class Deodar Wood including carriage of materials within all leads and lifts & as per direction of Engineer-in-charge. |
8 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Second class Deodar Wood |
9 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, including panellingall complete as per direction of Engineer-in-charge. Second class Deodarwood 40 mm thick shutters |
10 | Providing and fixing 19mm (Nineteen milimetre) thick commercial boardfor cup board etc., in Box, shelves with screws and fittings wherever required,(fittings to be paid separately). |
11 | Providing and fixing 19mm (Nineteen milimetre) thick commercial board Shutters for cup board etc.,with screws and fittings wherever required,(fittings to be paid separately) including ISI marked nickel plated bright finishing M.S. piano hinges conforming to IS:3818 marked with necessary screw etc all complete. |
12 | Providing and fixing 9 mm thickcommercial ply lining with necessary screws/nuts & bolts/ nailsand fixed on wooden /steel frame work, complete as per direction of Engineer-in- charge (Frame work shall be paid for separately). |
13 | Providing and fixing 6 mm thickcommercial ply lining with necessary screws/nuts & bolts/ nailsand fixed on wooden /steel frame work, complete as per direction of Engineer-in- charge (Frame work shall be paid for separately). |
14 | Providing and fixing Brass sliding door bolts (S.S. Or equivalent) 250 X 16 mm size. |
15 | Providing and fixingHettich Hinge cupboard (S.S. Or equivalent) (i) 150 X 10 mm size. |
16 | Providing and fixingBrass handles anodized (i) 125 mm size |
17 | Providing and fixingBrass handles anodized100 mm size |
18 | Providing and fixingBrass tower bolts (Barrel type) (i) 150 mm size. |
19 | Providing and fixing hydraulic single acting Door closerwith necessary screws etc. complete. 150 mm |
20 | Providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete as per directions of Engineer- in-charge.including carriage of materials in all leads and lifts. |
21 | Providing and fixing 150mm (one hundred fifty milimetre) oxidized M.S. hooks and eyes. |
22 | Providingand fixing PVCplain cover fillets beeding20 x 3mm section including mitring at junction with wooden screws and nails etc.: 20 x 3 mm |
23 | Providingand fixing Hard wood plain squre edged cover fillets beeding40 x 12 mm section including mitring at junction with wooden screws and nails etc.: 40 x 12 mm |
24 | Providing and fixing12 mm thick Pine Wood wood Tongued and Grooved lining of approved quality with butt jointing and nails(frame work and cover fillets to be paid for separately). |
25 | Providing and fixing 1 mm thick lamination sheet of approved shade and quality fixed with approved adhesive and nails complete including carriage of material within all leads and lifts. |
26 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).including carriage of material within all leads and lifts. |
27 | Providing and fixing curtain rods of Stainless steel SS grade 304, curtain rod 25 mm dia 1.20mm thick , with two chromium platedbrackets fixed with end finnels & C.P. brass screws and wooden plugs, etc., wherever necessary complete : 25 mm dia |
28 | Providing and fixing Door Silencer 3 " with screws etc. complete.inclusive for carriage of materials within all leads, lifts and other incidentals. |
29 | Providing and laying vitrified floor tiles in Size of Tile 600x600 mm(thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete |
30 | Providing and laying Vitrified tiles in Size of Tile 600x600 mm(thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). |
31 | Providing and laying matt finished vitrified tile of size 300x300 x 9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. |
32 | Providing and fixing 18mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels(i)Granitestone |
33 | Providing edge moulding to 18mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as perdesign approved by Engineer-in-Charge:- Granite work. |
34 | Providing and fixing HDF decorative laminate core board flooring AC4 class 32, 7mm thick placed over cushion of 2mm thick expended polethene foam plus 100Microne thick polethene sheet under lay No. 045 Beech West including border of required shade and colour complete in all respect upto all floor levels as per direction of Engineer in charge including carriage of materials in all leads and lifts. |
35 | Providing & Fixing decorative high pressure laminated sheet (PVC ) 2MM thick in Flooring/Skirting of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved qualityincluding carrage of material in all leads and lifts. |
36 | Providing and fixing 2 mm thick Polycarbonate sheet plain lining with necessary screws/nuts & bolts/ nails, and fixed on wooden /steel frame work, complete as per direction of Engineer-in- charge (Frame work shall be paid for separately). |
37 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar worksfor all leads & lifts, all complete as per direction of Engineer-in-charge. |
38 | Polishing with Malamine polish including carriage of materials within all leads and lifts.(i) Two or more coats on new works including a coat of wood filler |
39 | Providing and Fixing Modular kitchen , Drawer Made ofMS. Wire Grating complete in alll RespectIncluding Carriage of Material with in All leads and lifts.(i) Size of Drawer 600x450x250 mm |
40 | Removing dry or oil bound distemper, water proofong cement paintand the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete including carriage of materials within all leads and lifts. |
41 | Providing and applying white cement based putty of average thickness 1.00mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including carriage of materials within all leads and lifts. |
42 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade One or more coats on old work complete including carriage of materials within all leads and lifts. |
43 | Finishing walls with Acrylic Smooth exterior paint of required shade New work (One or more coat applied @ 0.90 ltr/10sqm) including carriage of materials and as per the direction of the Engineer-in-Charge. |
44 | Finishing walls with Acrylic Smooth exterior paint of required shade Old work (One or more coat applied @ 0.90 ltr/10sqm) including carriage of materials and as per the direction of the Engineer-in-Charge. |
45 | Painting with synthetic enamel paint on previously painted wood of approved brand and manufacture of required colour to give an even shade one or more coats on old work including carriage of materials in all leads and lifts. |
46 | French spirit polishing One or more coats on old work including carriage of materials within all leads and lifts as per direction of the Engineer-in-charge. |
47 | Providing scaffolding for all kind of works in multistorey buildings up to all height with Bamboo complete tied with rope on joints and pedistal of CGI Sheet etc. in all respect (Face area of scafolding up to top pedestal height shall be measured and paid for) including carriage of materials within all leads and lifts as per direction of the Engineer - in - charge. |
48 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge:- External work 15 mm nominal outer dia Pipes.(i) 15 mm dia nominal bore |
49 | Providing and fixing on wall face unplasticised Rigid PVCpipes conforming to IS : 13592 Type B, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.(i) 110 mm diameter |
50 | Providing and fixing on wall face unplasticised Rigid PVCpipes conforming to IS : 13592 Type B, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.(i) 75 mm diameter |
51 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVCpipes conforming to IS : 13592 Type B, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Bends of required degree (any radius) :-Providing and fixing PVC (finolex) plain bend ISI marked including fixing with approved adhesive etc. complete.(i) 110 mmnominal size :- |
52 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVCpipes conforming to IS : 13592 Type B, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Bends of required degree (any radius) :-Providing and fixing PVC (finolex) plain bend ISI marked including fixing with approved adhesive etc. complete (i) 75 mm nominal size :- |
53 | Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete (i) 110 mmnominal size : |
54 | Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete (i) 75 mm nominal size :- |
55 | Providing and fixing PVCsingle equal branch with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete.(i) 110 mmnominal size :- |
56 | Providing and fixing PVCsingle equal branch with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete. (i) 75 mmnominal size :- |
57 | Providing and fixing PVCsingle equal branch plain ISI marked including fixing with approved adhesive etc. complete.(i) 110 mmnominal size :- |
58 | Providing and fixing PVCsingle equal branch plain ISI marked including fixing with approved adhesive etc. complete. (i) 75 mmnominal size :- |
59 | Providing and fixing PVCDouble equal branch plain ISI marked including fixing with approved adhesive etc. complete. (i) 110 mmnominal size :- |
60 | Providing and fixing PVCDouble equal branch plain ISI marked including fixing with approved adhesive etc. complete.(i) 75 mmnominal size :- |
61 | Providing and fixing PVCcollars ISI marked including fixing with approved adhesive etc. complete.(i) 110 mmnominal size :- |
62 | Providing and fixing PVCcollars ISI marked including fixing with approved adhesive etc. complete (i) 75 mm nominal size :- |
63 | Providing and fixing PVC offset 450 mmincluding carriage of materials within all leads and lifts :-(i) 110 mmnominal size :- |
64 | Providing and fixing PVC offset 450 mmincluding carriage of materials within all leads and lifts (i0 75 mm nominal size :- |
65 | Providing and fixing PVC Cowl including carriage of materials within all leads and lifts :- (i) 110 mmnominal size :- |
66 | Providing and fixing PVC Cowl including carriage of materials within all leads and lifts(i) 75 mm nominal size :- |
67 | Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete.(i) 110x90mm |
68 | Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete(i) 110 mm X 75 mm. |
69 | Providing and fixing white vitreous china pedestal type water closet(European type W.C. pan) including seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, including manually controlled device (handle lever), conforming to IS : 7231, including all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan including ISI marked white solid plastic seat and lid |
70 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/makeJaquar shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. Cat No.LYSWHT38851P1 |
71 | Providing and fixing wash basin with Pedestal Jaquar including C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-White Vitreous China Wash basin size 550x400 mm including a 15 mm CP Brass single hole basin mixerv Cat No.LYSWHT38801 |
72 | Providing and fixing white vitreous china urinalJaquar of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having waterinletfrombackside,includingDiversion plate 600x300 mm & fixingtowallwithsuitable brackets all as per manufacturers specification and direction of Engineer-in-charge. Cat No.URS-WHT-13253N |
73 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 including C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink including drain board 470x420x178 mm bowl depth 178 mm Ess Ess Makecate No.HDB37189 |
74 | Providing and fixing C.P. brass Waste Coupling for wash basin and sink, of approved quality and colour Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms Ess Ess make C-230K |
75 | Providing and fixing P.V.C. waste pipe 32 mm dia for sink or wash basin including P.V.C. waste fittings complete. including carrage of material within all leads and lifts:- |
76 | Providing & fixing 100 mm dia, C.P. grating including carrage of material within all leads and lifts:- |
77 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
78 | Providing and fixing C.P. towel rail Jaquar complete with brackets fixed to woodencleatswithCPbrassscrewswithconcealedfittings arrangement of approved quality and colour.600 mm long C.P.towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. Cat No. AQH 771 |
79 | Providing and fixing C.P. towel bracket Jaquar complete with brackets fixed to woodencleatswithCPbrassscrewswithconcealedfittings arrangement of approved quality and colour.600 mm long C.P.towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. Cat No. AKP35781PS |
80 | Providing and fixing C.P. towelring Jaquar trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. AKP35721P |
81 | Providing and fixing 600x120x5 mm glass shelfAC107with edges round off, supportedonanodisedaluminiumangleframewithC.P.brass brackets equivalent and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. including carriage of materials within all leads and lifts :- |
82 | Providing and fixing three in oneacrylic shelfwith edges round off, supportedonanodisedaluminiumangleframewithC.P.brass bracketsJaquarand guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. including carriage of materials within all leads and liftsCat No.ACH1175 |
83 | Providing and fixing toilet paper holder JaquarC.P. brass : including carriage of materials within all leads and lifts Cat No. AKP35753PC |
84 | Providing and fixing CP Brassmixer for wash basin/sink of quality & make Jaquaras approvedincluding carriage of materials within all leads and lifts :15 mm nominal dia Cat No. ARI39309 |
85 | Providing and fixing CP Brass wall mixer of quality &make Jaquar as approvedincluding carriage of materials within all leads and lifts :15 mm nominal dia KUP35117PM |
86 | Providing and fixing C.P. brass long nose bib cockJaquar of approved quality conforming to IS standards and weighing not less than 810 gms.including carriage of materials within all leads and lifts Cat No.35037Pm |
87 | Providing and fixing C.P. brass bib cock of approved qualityJaqua Cat No. KUP35038PM conforming to IS standards and weighing not less than 810 gms.including carriage of materials within all leads and lifts |
88 | Providing and fixing C.P. brass Pillar cock Jaquarof standard design and of approved make conforming to IS:8931. including carriage of materials within all leads and lifts Cat No.KUP35011BPM |
89 | Providing and fixing C.P. brass angle Cock Jaquar for basin mixer and geyser points of approved quality conforming to IS:8931 including carriage of materials within all leads and lifts Cat No. KUP35053PM |
90 | Providing and fixing C.P. Jaquar Health Faucetwith fittings complete.including carriage of materials within all leads and lifts Cat No, ALD573 |
91 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
92 | Providing and fixing uplasticised PVC connection pipe with brass unions :45 cm length, 15mm nominal boreincluding carriage of materials within all leads and lifts |
93 | Providing and fixing uplasticised PVC connection pipe with brass unions :60 cm length, 15mm nominal boreincluding carriage of materials within all leads and lifts |
94 | Providing and fixing C.P. soap Dish Jaquarhaving length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. Cat No. AKP35731P |
95 | Providing and fixing C.P. brass shower Jaquar with Showerincluding carriage of materials within all leads and lifts Cat No. HSH1655 |
96 | Providing and fixing Tooth brush tumbler with necessary fitting complete including carriage of materials within all leads and lifts. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail