Delhi University has published Tender For Misc. Work Type 1 House No. 5. Submission Date for this Tender is 20-03-2023. Building Work Tenders in delhi Delhi. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Item Description |
2 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
3 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.Single rubber stopper |
4 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 5.5 mm thick glass panes |
5 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :In 75x75 mm deep chase |
6 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two or more coats) over and including water thinnable priming coat with cement primer |
7 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work |
8 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
9 | Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modifiedself curing mortar, including disposal of rubbish, all completeas per the direction of Engineer-In-Charge. |
10 | Repair the fiber sheet and filling the joints i/c chemical treatment at Geetanjali hostel, SDC. |
11 | Refixing the loose kota stone i/c mason labour, cement, sand etc. at Geetanjali hostel warden house. |
12 | P/f CP wash basin waste jali 32mm ISI |
13 | Opening of under ground line in the wall of wash basin removal of mass and malba etc. |
14 | Fillinbg the holes of ants on the roof of the Health Centre with termite chemicals etc. |
15 | Repairing out the tile brick work joints. |
16 | Pointing on tile brick work with cement mortor and Dr. fixit. |
17 | J.K. wall putty |
18 | Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. |
19 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Flexible pipe40 mm dia |
20 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
21 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour.Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms |
22 | Repairing door piller i/c nut bolt carpenter etc. complete job |
23 | Repair the aluminium door i/c cutting, fitting, but bolt, carpenter etc. |
24 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall25 mm nominal outer dia Pipes |
25 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.15 mm nominal bore |
26 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:893115mm nominal bore |
27 | Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour.15 mm nominal bore with 45 cm length |
28 | Repair the underground GI 20mm pipe line i/c GI nipple socket, plumber & helper charges etc. complete job. Biotech building |
29 | Repair flush tank |
30 | Taking out the old leakage GI line |
31 | Repair broken pipe line i/c union 20mm pipe etc. |
32 | Replacement of old door lock and fixing with new lock i/c labour etc. |
33 | Open block flooring drainage pipe and removal of malba. |
34 | Repair damage flooring in corridor 2nd floor PMB building R.No. 301. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail