|
| 1 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 3 | (a) 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 4 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approvedmake, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 5 | Providing and fixing Stainless Steel curtain rods having wall thickness of 1.25 mm with two SS brackets fixed with SS screws and PVC sleeves etc., wherever necessary complete : |
| 6 | (a) 25 mm dia. |
| 7 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @3.3kg/sqm including pointing the joints with white cement and matching pigments etc., complete. |
| 8 | Providing and fixing on wall face unplasticised Rigid PVC rain water/ Soil or waste pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, |
| 9 | (a) Single socketed pipes- 75 mm diameter |
| 10 | (b) Single socketed pipes- 110 mm diameter |
| 11 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water / SW pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion. |
| 12 | (a) Single tee with door |
| 13 | (i) 75x75x75 mm |
| 14 | (ii) 110x110x110 mm |
| 15 | (b) Single tee without door |
| 16 | (i) 75x75x75 mm |
| 17 | (ii) 110x110x110 mm |
| 18 | (c ) Bend 87.5° |
| 19 | (i) 75 mm bend |
| 20 | (ii) 110 mm bend |
| 21 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC SW pipes by means of 50x50x50 mm hardwood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. |
| 22 | (a) 75 mm |
| 23 | (b) 100 mm |
| 24 | 12 mm cement plaster of mix : |
| 25 | (a) 1:6 (1 cement: 6 coarse sand) |
| 26 | 15 mm cement plaster on rough side of single or half brick wall of mix : |
| 27 | (a) 1:6 (1 cement: 6 coarse sand) |
| 28 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade: |
| 29 | (a) Two or more coats on new work. |
| 30 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. |
| 31 | (a) With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre. |
| 32 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level whiteP.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : |
| 33 | (a) W.C. pan with ISI marked white solid plastic seat and lid |
| 34 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : |
| 35 | (a) One urinal basin withoutP.V.C. automatic flushing cistern |
| 36 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: |
| 37 | (a) White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap |
| 38 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings |
| 39 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. and sqattig plate of good quality and make as approved by Engineer - in - charge. |
| 40 | Providing and fixing white vitreous china female squatting plate urinal with integral rim longitudinal flush pipe. |
| 41 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 42 | (a) Flexible pipe -32 mm dia |
| 43 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : |
| 44 | (a) Rectangular shape 453x357 mm |
| 45 | Providing and fixing trap of self cleansing design with S.S. square grating complete, including cost of cutting and making good the walls and floors : |
| 46 | (a) U PVC 100 mm inlet and 75 mm outlet |
| 47 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall |
| 48 | (a) 15 mm nominal dia pipes. |
| 49 | (b) 25 mm nominal dia pipes. |
| 50 | Making connection of G.I./ CPVC distribution branch with G.I. main of following sizes by providing and fixing tee, Male/Female brass threaded CPVC connectoretc. complete : |
| 51 | (a) 25 to 40 mm nominal bore |
| 52 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 53 | (a) 25 mm nominal bore |
| 54 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. |
| 55 | (a) 15 mm nominal bore. |
| 56 | Providing and fixing C.P. brass stop cock of standard design and of approved make conforming to IS:8931. |
| 57 | (a) 15 mm nominal bore. |
| 58 | Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. |
| 59 | (a) 45 cm length-15 mm nominal bore |
| 60 | Cutting holes up to 30x30 cm in walls including making good the same With common burnt clay F.P.S. (non modular) bricks |
| 61 | Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. |
| 62 | (a) 45 cm length-15 mm nominal bore |
| 63 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): |
| 64 | (a) With float glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm) |
| 65 | Providing and fixing stainless steel (SS 304 grade) adjustable friction windows stays of approved quality with necessary stainless steelscrews etc. to the side hung windows as per direction of Engineerin-charge complete. |
| 66 | (a)255 X 19 mm |
| 67 | Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete. |
| 68 | (a)Powder coated minimum thickness 50 micron aluminium |
| 69 | Taking out existing Aluminum/steel/ wooden window or door shutter, repair by cutting, oiling, gressing, painting and making smooth working etc. and refixing of repaired shutters to existingframes, including refixing of hinges with screws, etc. as required as per site condition and as per the direction of the Engineer-in-charge |
| 70 | Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: |
| 71 | (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions i/c rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion i/c rounding off junction of vertical and horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area. (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at jointsof PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm). |
| 72 | Providing and fixing curtain made of cloth (Pattern and type of cloth as desired by the users) of size 1.10 to 1.20m X 1.80 to 1.90 m ready to use i/c stitching, fixing PVC ring in curtian, all four sides to be folded with same materials and top side with supprting materials etc as directed by the Engineer in charge |
