Goa Housing Board has published Tender For Construction Of New Conference Room On New Market Complex Terrace Porvorim Goa. Submission Date for this Tender is 13-04-2023. Building Work Tenders in North Goa Goa. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 23-Mar-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 30-03-2023 |
| 2 | 30-Mar-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 06-04-2023 |
| 3 | 06-Apr-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 13-04-2023 |
| Sl. No. | Item Description |
| 1 | Civil Works |
| 2 | Steel work in welded ( SAIL , TATA , VIZAG & using electrodes of AdOr or ES4B or Deh Secheronmake only) in built up sections trusses and framed workincluding cutting, hoisting, fixing in position and applying a priming coat of red lead paint. In Tees, Angles, flats and channels All works complete as per the drawing, specification and direction of the Engineer-In-Charge. |
| 3 | Steel work in welded ( SAIL , TATA , VIZAG & using electrodes of AdOr make only ) in tubular sections trusses and framed workincluding cutting, hoisting, fixing in position and applying a priming coat of red lead paint. In square, rectangular & Circular Tubes of Various sizes.All works complete as per the drawing, specification and direction of the Engineer-In-Charge. |
| 4 | Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement. All works complete as per the drawing, specification and direction of Engineer -In-Charge a) 40mm thick |
| 5 | Providing and fixing Vinyl flooring of approved shade and design with adhesive complete. All works complete as per the drawing, specification and direction of the Engineer-In-Charge. |
| 6 | Providing & fixing in position Galvalume/Zincalume flashings, cappings, ridges, gutters upto 600mm/610mm girth and min 3.00m in length (cold Rolled Steel 550 MPa yeild Stress ASTM A 446 Grade E) with hot-dip metallic coating of aluminium-zinc alloy(AZ 150 galvalume) (150 gms/sqm total of both sides with Al-Zn Composition= 55% & 43.5% resp. & 1.5% Si conforming to ASTM 792/ AS 1397) 0.45 mm base metal thickness and 0.50mm total coated thickness, factory cut at all heights for roof, side & gable cladding complete in all respects with AZ 150 GSM SMP color Coated (20mic exterior coat of Silicon Modified Polyester paint system over 5 mic primer and 5 mic polyester back coat over 5 mic primer) incl. fixing to purlins with no 12x14x55mm mechanically galvanised hex head self drilling screws of the best quality as per AS-3566 class 3-4 approved, which should be compatible to be used with sheets. with integral washers and EPDM seals etc. Silicon sealant non-hardening neutral cure type shall be applied at all end laps, complete as directed.All works complete as per the drawing, specification and direction of the Engineer-In-Charge. |
| 7 | Providing and fixing anchor rod HIT-V-5.8 M16x300 (250 mm ED) in RCC structures with injectable mortar HIT-HY 200-R 330/2 including drilling in RCC including all related works as directed by Engineer in-charge. |
| 8 | Providing & Fixing in position Double Skin roof with Zincalume/ Galvalume colour coated & bare profile sheet with subtle square fluting factory cut at all heights for roof, side & Gable cladding complete in all respect. TOP SHEET-The end rib shall be designed for anti-capillary action. The feed material should be manufactured out of nominal 0.45 mm Base Metal Thickness (BMT), Hi-strength steel with min. 550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% Aluminium, 43.5% Zinc &1.5% Si) as per AS 1397 - Zincalume AZ150 (Min. 150 gms/sq.mt total on both sides) with quality paint coat as per AS/NZS 2728 type 3-4. The paint shall have a total coating thickness of nominal 35 µm, comprising of nominal 20 µm exterior SMP coat on top surface and nominal 5 µm reverse backer coat on back surface over nominal 5 µm primer coat on both surfaces of approved colour shade. Total Coated Thickness (TCT) should be 0.50mm. Total Painted Thickness (TPT) should be in addition to 0.50mm. The steel sheet shall be fastened with nominal 40 µm zinc coated or nominal 25 µm zinc-tin alloy coated, Hex head, self-drilling screw as per AS 3566-2002 Class 3 fasteners of approved make with EPDM washer as per the requirement considering the profile shape and design load. The fastener size shall be calculated as per the design or manufacturers recommendations complete as directed.All works complete as per the drawing, specification and direction of the Engineer-In-Charge. |
| 9 | Interior works |
| 10 | Supplying and placing in position armed revolving high back chairs of approved make and colour and BIFMA (The Business & Institutional furniture manufactures association) compliant. The chair shall seatmade up of 1.2(± 0.1 ) cm thick hot pressed plywood seat of size of 51.0cm (W) x 48.0cm (D) , upholstered with fabric or synthetic leather and molded Polyurethane Foam and 1.2 (± 0.1) cm thick hot pressed plywood Back of size 48cm.(W) X 64.5cm.(H)upholstered with replaceable fabric or synthetic leather upholstery covers andmolded Polyurethane Foam.The back ply and foam shall be designed with contour lumber support for comfortable seating posture. The HR polyurethane Foam for seat and back shall be molded with density of 45 ± 2 kg/m3 and hardness load of 16 ± 2 kgf as per IS:7888 for 25% compression.The chair shall be provided with molded Polyurethane (P.U.) Armrest mounted onto a drop lift height adjustable type (up to 6.5 ± 0.5cm in 5 steps) chrome plated MS Tubular armrest support with swivel adjustment of 22o on both sides. Front pivot synchro mechanism shall have features of 360° revolving, Single point control, Front pivot for tilt with feet resting on ground ensuring more comfort, Tilt tension adjustment, 4 position locking with anti-shock feature, Seat back tilting ratio of 1:2.. The backrest shall have a fixed type mechanism (i.e. No back up/down adjustment) Pneumatic Height adjustment shall be of 9.0 (± 0.3) cm. The pedestal shall be fabricated from 0.2 ( ± 0.02) cm thick HR sheet ( IS : DD 1079 / HR skin pass ) , chrome plated and assembled with injection moulded black polypropylene hub cap and 5 nos. twin wheel castors. The pedestal shall be 66.0 (±0.5) cm. and Pitch-center dia. Shall be 76.0 (±1.0) cm with castors. The twin wheel castors shall be injection moulded in black Nylon. All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Engineer (Refer drawing number – B-IN-206,207) |
| 11 | Supplying and placing in position armed revolving mid back chairs of approved make and colour and BIFMA (The Business & Institutional furniture manufactures association) compliant. The chair shall seatmade up of 1.2(± 0.1 ) cm thick hot pressed plywood seat of size of 51.0cm (W) x 48.0cm (D) , upholstered with fabric or synthetic leather and molded Polyurethane Foam and 1.2 (± 0.1) cm thick hot pressed plywood Back of size 48cm.(W) X 64.5cm.(H)upholstered with replaceable fabric or synthetic leather upholstery covers andmolded Polyurethane Foam.The back ply and foam shall be designed with contour lumber support for comfortable seating posture. The HR polyurethane Foam for seat and back shall be molded with density of 45 ± 2 kg/m3 and hardness load of 16 ± 2 kgf as per IS:7888 for 25% compression.The chair shall be provided with molded Polyurethane (P.U.) Armrest mounted onto a drop lift height adjustable type (up to 6.5 ± 0.5cm in 5 steps) chrome plated MS Tubular armrest support with swivel adjustment of 22o on both sides. Front pivot synchro mechanism shall have features of 360° revolving, Single point control, Front pivot for tilt with feet resting on ground ensuring more comfort, Tilt tension adjustment, 4 position locking with anti-shock feature, Seat back tilting ratio of 1:2.. The backrest shall have a fixed type mechanism (i.e. No back up/down adjustment) Pneumatic Height adjustment shall be of 9.0 (± 0.3) cm. The pedestal shall be fabricated from 0.2 ( ± 0.02) cm thick HR sheet ( IS : DD 1079 / HR skin pass ) , chrome plated and assembled with injection moulded black polypropylene hub cap and 5 nos. twin wheel castors. The pedestal shall be 66.0 (±0.5) cm. and Pitch-center dia. Shall be 76.0 (±1.0) cm with castors. The twin wheel castors shall be injection moulded in black Nylon. All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Engineer (Refer drawing number – B-IN-206,207) |
| 12 | CONFERENCE TABLE Size - 7200mm(L) x 750mm(W) x 750mm(HT) - 2 no. Size – 2800mm(L) x 750mm(W) x 750mm(HT) – 1 nos. (B1) Providing & fixing in position Conference table in 19 mm thick Marine BWP (boiling water proof) plywood for top & vertical supports & finished with 1 mm laminate & all exposed edges to be finished with wood lipping & with 3 coats or more of melamine polish to match the shade of veneer with necessary hardware & labour.The table top will be fixed with a modular pop-up box tomake provisionfor wire management to take care of basic wiring requirement for power data- voice,HDMI switches. The work will include cleaning, placing in position, etc. complete.All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer. (Refer drawing number – B-IN-206,207) |
| 13 | MODEL DISPLAY TABLE (B2)Size – 6150mm(L) x 700mm(W) x 600mm(HT) – 1 nos. (B2) Providing & fixing in position Model Display Table in 19 mm thick Marine BWP (boiling water proof) plywood &finished with 1mm thick laminate externally. All exposed edges shall be finished in 1 mm thick external laminate & complete with necessary labour,hardware, cleaning, placing in position etc. complete. All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer. (Refer drawing number – B-IN-) |
| 14 | SOLID PARTITION IN CEMENT BOARD & PLYWOOD (B3)ground moulded chamber burnt bricks with including cost Providing & fixing in positionfull heightsolid partitionmade outof aluminumframework of size 65mm x 38 mmtubular frame ,18 gauge having grid spacing at 600mm x600mmcenter to center both ways & covered with 12mm cement board on external side & 8 mm thickMarine BWP (boiling water proofplywood on internal sides of framework. The framework shall be properly screwed to the walls, ceiling and floor and cement board/ plywoodshall be screwed to the framework. The space between the framework grid shall be filled with glass wool for sound insulation. Provision shall be made for necessary cutouts for services such as wire management etc. as per design including all necessary hardware & accessories, grooves, adhesives, cutting & making good the original surfaces on completion. Provision shall be made for wire management to take care of basic wiring requirement for providing power data- voice switches on a modular switch plate. All material will be of approved make. Measurements shall be calculated from finished floor level to false ceiling level, the framework above false ceiling will not be calculated. Frame work above false ceiling shall be upto 1000mm height above false ceiling level. All works complete as per the drawing, specification and direction of the Engineer(Refer drawing number – B-IN-206,207) |
| 15 | FLUSH DOOR (WITH/WITHOUT VISION PANEL) LAMINATE FINISH (B4) Size : 1000mm (L) X 2100mm(HT) valveProviding & fixing in position door with frame of second class Indian teak wood & size of 90x50mm &factory made solid core waterproof flush door shutter of 35 mm thick & finished with 1mm thick laminater of approvedcolour & texture on both sides & second class Indian teak wood lipping of size 38x12mm on edges of shutter.The shutter shall be provided with/without a vision panel of size as per design using8 mm thick toughened glass with etching pattern fixed with second class Indian teak wood beading of size 19x12mm on both sides.Door shall be fixed usingSS. brush finished brass butt hinges & provided with a concealedhydraulic door closer, SS matt finish concealed mortise lock case with lever handle, profile thumb turn cylinder (with key outside & thumb turn inside) with key hole, PVC door buffer & SS brush finish door stopper. All exposed second class Indian teak wood lipping & frame shall be finished with 2 to 3 coats of melamine polish (Matt/Gloss) to match the colour/ shade of the laminateincluding final coat of buffing till the required finish is achieved. All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer.(Refer drawing number – B-IN-206,207) |
| 16 | PANELLING IN PVC PANNELS (B5) Providing & fixing in position PVC panelingof approved shade, texture on existing calcium silicate/ plywood partiion. The pannels shall be of 1.55 mmthickness and of size 250mm widthx 2950 mm height without perforations. The PVC pannles will be interlocking of sizemm x mm xmmwith necessary labour,hardware, cleaning, placing in position etc. complete. All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer.(Refer drawing number – B-IN-206,207) |
| 17 | FABRIC PANELLING IN ACOUSTICAL BOARD (B6) Providing & fixing in position wall paneling in 25 mm thk acoustical wall panels of approved size with fire-resistant fabric of approved shade / texture &having a minimum sound absorption level of 0.90 NRC(Noise Reduction coefficient) Provision shall be made for wire management to take care of basic wiring requirement for providing power data-voice switches on modular switch plate. All works shall be complete with necessary labour, hardware, cleaning, placing in position etc. All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer.(Refer drawing number – B-IN-206,207) |
| 18 | CALCIUM SILICATE BOARD PANELLING(B7) Providing & fixing in position wall paneling in 12 mm thk calcium silicate of approved brand. Provision shall be made for wire management to take care of basic wiring requirement for providing power data-voice switches on modular switch plate. All works shall be complete with necessary labour, hardware, cleaning, placing in position etc. All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer.(Refer drawing number – B-IN-206,207) |
| 19 | LAMINATE FINISH PANELLING(B8) Providing & fixing in position paneling in 19 mm thick Marine BWP (boiling water proof) plywood on MS column finished with1mm thk laminate of approved shade/texture. Allexposed edges shall be finished with teak wood lipping with 3 coats or more of approved shade melamine polish. Provision shall be made for indirect lighting necessary labour,hardware, cleaning, placing in position etc. complete. All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer.(Refer drawing number – B-IN-206,207) |
| 20 | PLYWOOD WITH LAMINATE SKIRTING(B9) Providing & fixing in position 75mm heightskirting in 12 mm thick Marine BWP (boiling water proof) plywood on partition finished with1mm thk laminate of approved shade/texture. Allexposed edges shall be finished with teak wood lipping with 3 coats or more of approved shade melamine polish. Provision shall be made for indirect lighting necessary labour,hardware, cleaning, placing in position etc. complete. All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer.(Refer drawing number – B-IN-206,207) |
| 21 | STORAGE CABINET INLAMINATE FINISH (B10) Providing & fixing in position Storage cabinet in 19 mm thick Marine BWP (boiling water proof) plywood &finished with 1mm thick laminate externally and 1mm thick laminate inside. Back sheet in 8mm plywood & cabinets with shutters fixed on SS. brush finished brass"L" hingesand single shelfeach in 19mm ply with teak wood lipping on all sides & finished with 1mm thick laminate & fixed on stainless steel finished shelf buttons. Cabinet shutters shallbe fixed with heavy duty SS304 grade brushed finish handles (100 mm). All exposed edges shall be finished with second class Indian teak wood lipping with 2 to 3 coats or more of melamine polish to match the shade of laminate & complete with necessary labour,hardware, cleaning, placing in position etc. complete. All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer. (Refer drawing number – B-IN-) |
| 22 | PLANTER BOX (Size : 4050mm (L) X 300mm (L) X 300mm (HT) (B11) Providing & fixing in position planter box upto 400mm depth in 19 mm Marine BWP (boiling water proof)plywood & finished with 1mm thk laminate as per design. Top shall be recessed to hold artificial plants. Allexposed edges of plywood shall be finished with PVC edge banding tape matching shade of laminate & complete with necessary labour,hardware, cleaning, placing in position etc. All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer. (Refer drawing number IN |
| 23 | False Ceiling Works |
| 24 | CALCUIM SILICATE BOARD PLAIN FALSE CEILING Providing and fixing 8mm thick calcuimsilicate board suspended false ceiling false ceilingin horizontal / verticalsurfaces, stepped, cove ( straight & curvature). The calcuim silicate board having density of 850 to 950kg/m3, shall be made from Siliceous & Calcareous material reinforced with fiber,made in Laminar process and then autoclaved to give stable crstalline structure. The framework shall consistofapproved make Galvanised iron (GI)Perimeter Channel of 0.55 mm thickness, two unequal flanges of 20 mm and 30 mm and web of 27 mm fixed to surrounding walls / partition by using nylon sleeves and screws at 450 mm centres. Approved make Galvanised iron (GI)Intermediate Channel of 0.9 mm thickness having two equal flanges of 15 mm each and a web of 45 mm shall be suspended from the soffit at 1220 mm centrewith G.I.Cleat and steel expansion fasteners. Galvanised iron (GI)Ceiling section of 0.55 mm thickness having web of 50.5 mm and flanges of 26 mm each with lips of 10.5 mm shall be fixed to the Intermediate channel with connecting clips across to the Intermediate channel at 457 mm centres.respectively.Calcuim silicate boards of8 mm thickness having taper edge /Square edge shall be screw fixed across the ceiling sections with 25 mm long self drilling & tapping screws having Phillips head with under head cutter at 200 mm centres.The Board’s joints shall be staggered. Edges of the facing boards shall be jointed and finished so as to have a seamless finish which includes filling and finishing withjointing compound and 48 mm wide self-adhesive fibre tape. Cement primer(Oil/Water based) shall be provided on the entire surface before putty/painting. Necessary cut-outs shall be provided before Jointing and Finishing as per instructions. Perimeter Channel and supporting materials shall be provided to make any opening for AC/light fittings, diffusers etc. and shall be supported properly to maintain the integrity of the ceiling. Marking shallbe provided for Sprinkler, Smoke Detectors etc. on the ceiling and also templates shall be provided and fixed in the ceiling made of 6mm to 18 mm BWR (boiling water proof) Plywood as required. Note :- As laid (board surface area) area shall be measured for billing. All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer.(Refer drawing number – B-IN-301-307) |
| 25 | 600mm X600 mm CALCIUM SILICATEACOUSTICAL TILE FALSE CEILING Providingand fixing 15mm thick densified tengular edged eco friendly light weight calcium silicate false ceiling tiles (like Aerolite) of approved texture Spintone/ Cosmos/ Fine Fissured or equivalent of size 595mm x 595mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanizing @ 120 grams per square metre. including both side) consisting of main "T" runner suitably spaced at joints to get required length and of size 24x38mm made from 0.33mm thick (minium) sheet, spaced 1200mm center to center, and cross "T" of size 24x28mm made of 0.33mm thick (Minimum) sheet to be inter locked at middle of the 1200x600mm panel to from grid of size on a Perimeter wall angle precoated steel of size 600x600mm, resting on periphery walls/ partitions (24x24x300mm) made of 0.40mm thick (minimum) sheet with the help of rawl plugs at 450mm and laying 15mm thick densified edges calcium silicate ceiling tiles of approved texture light fittings, fixture, smoke detectors etc., wherever required. Main "T" runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6mm fixed to celing using with 12.5mm dia and 50mm long dash fastners, level clips of size 85x30x0.8mm, spaced at 1200mm center to center along main "T" bottom exposed with 24mm of T-section shall be pre-painted with polyester baked paint, for all heights, as per specifications, drawings etc. complete.(As Directed by Engineer in Charge)Note: Only Calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/ opening (cut outs) having are less than 0.30 sqm. The Calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection>85% non-combustible as per B.S.476 part IV, 100% humidity resistance and also having thermal conductivity 0.043 w/m 0 KC. The item shall include providing markings and cutoutsfor electrical fixtures,sprinklers,smoke detectors,diffusers,curtains etc. on the ceiling and also providing & fixing templates in the ceiling made of 12/19mm BWP (boiling water proof) plywood. All material shall be of approved make. Measurements shall be considered wall to wall without any deductions..(Refer drawing number – B-IN-301-307) |
| 26 | HVAC |
| 27 | Inverter DX 4 way Cassette unit Supply, installation, testing and commissioning of INVERTER TYPE 4 way CASSETTE Split A.C. with R-410 / R-32 refrigerant, complete with following component. (Minimum 3 Star) (Preferred Make-Mitubishi / Toshiba / Daikin / LG / Blue Star / Equivalent) Out door Unit should have Inverter Compresser, high efficiency finned tinned condensors. Fins should be with anti corrosive coating with all electrical accessories ready for connection to incoming cable. The entire unit shall be in a weather proof, powder coated body & installed on suitable stand as per location. Unit should be charged with necessary refrigerent gas & oil. The indoor units will be complete in all respect including filter, wireless remote control, aerodynamically balanced blower. The unit should have air filter. All interconnecting refrigerant piping with best quality insulation.Unit shall be completed with power cabling and control cabling. Supply,Installation, testing & commissioning of DX 4 way Cassette units for below mentioned capacities; Conference room- 3.0 TR |
| 28 | Supply, Installation, Testing & Commissioning the pair of Copper Refrigerant Piping (Gas+Liquid) for above DX cassette units. Size and Thickness of copper piping as per manufacturers recommendations. copper piping rate should be including supporting of the piping. The Refrigerant piping shall be completed with Nitrile rubber insulation thickness of 19mm. |
| 29 | MS Stand for inverter DX split unit Supply, Installation, Testing & Commissioning of Oudoor Units Stands for above DX Units fabricated out of Mild Steel (MS) "C" Channel Section of minimum 75mm x 50mm x 5mm thick size complete with minimum 300mm long legs made of the same "C" channel with 8mm thick MS Plate at the bottom of the legs. The MS Plate should be minimum 150mm x 150mm. 2 Layered 10mm thick Ribbed Rubber Pads with 24 Gauge GI Shim inbetween shall be installed below the Condenser Stand Legs. |
| 30 | UPVC Drain Piping Supply, installation, testing & commissioning of UPVC Schedule 40 Drain piping as per the required Diameter complete with 9mm thick Nitrile Rubber / XLPE Insulation and finished with Alu Foil. |
| 31 | 25 mm Dia |
| 32 | 32 mm Dia |
| 33 | Removal and reinstallation of existing DX ODU units |
| 34 | Electrical |
| 35 | LT Cables andEnd Termination "Supply of4 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI markconforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.4 Core 4 sq.mm |
| 36 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm on surface,etc.complete as required |
| 37 | Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, completeas required.4 x 4 Sq. mm. |
| 38 | Cable Trays& Covers Supplying and Installing following size Perforatedtype 16 SWG, M.S.cable tray of GI pre-galvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 100mm width x 50mm depth |
| 39 | Providing & erecting Hot dipped Galvanised cover suitable for perforated type Cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 100 mm width & 20 mm height complete with necessary hardware in approved manner. |
| 40 | Supplying and Installing following size perforatedtype , M.S.cable traybends of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required.100mm width x 50mm depth (16 SWG) |
| 41 | Floor Raceway, Junction Box & Covers Supply, installation, testing and commissioning of Under floor HDG GI Race Ways ,2 mm thick with cover of below suitable sizes. 50 X 50 X 38 MM |
| 42 | Supply, installation, testing and commissioning of GI JUNCTION BOX with cover of below suitable sizes. 150 X 150 X 50 to 75 MM |
| 43 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in recessed PVC conduit(heavy) with modular switch, modular plates,suitable size modular GI box of specified Category and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.Group C-- with Cat B Modular Accessories |
| 44 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the (with) independent recessed PVC conduit(heavy) of appropriate size as required. 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earthwire (20mm Conduit) |
| 45 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent recessed PVC conduit(heavy) of appropriate size as required.2 x 4 sq.mm + 1 x 4 sq.mm earthwire (20mm Conduit) |
| 46 | Wiring for group controlled light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable (with)in recessed PVC conduit(heavy)and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 47 | Supplying and fixing suitable size modular GI box with modular plate and coverin front on surface or in recess including providing and fixing 3 pin 5/6 Amodular socket outlet and5/ 6 Amodular switch connection painting etc. as required.Cat B |
| 48 | Supplying and fixing following modularswitch/ socket on the existing modular plate and switchboxincluding connections but excluding modular plate etc. as required 15/16 A switch Cat B |
| 49 | 6 pin 15/16 A socket outlet Cat B |
| 50 | Supplying and fixing following size modular GI box alongwithmodularbase and cover plate for modulator switchesin recess etc. as required4 Module ( 125 mm x 7 mm) Cat B |
| 51 | Supplying and fixing modular blanking plateon the existing modularplate switch boxexcluding modular plate etc. as required (b) Cat B |
| 52 | Distribution Boards and accessories Supplying and fixing 6 A to 32 A,C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. (j) TPN, Cat B |
| 53 | Supplying and fixing following rating four pole (triple pole and neutral) 415 V RCCB having a sensitivity current upto 300mA inthe existing MCB DB complete with connections testing and commissioning etc as required 25 A, Cat B |
| 54 | Supply & Installation ofOutdoor FP+ FP(8M) enclosure,Weatherproof cabinets - IP 65 - IK 09 - with all accessories complete. |
| 55 | Supply & Installation ofTable POP UP BOX, 8M-1No. -6A Switch & Socket -POWER & 1No. -6A -Switch & Socket -UPS , 1HDMI ,1DATA, with all accessories complete. |
| 56 | Supply & Installation of Table POP UP BOX, 8M-1No. -6A-Switch & Socket -POWER & 1No. -6A-Switch & Socket -UPS ,1DATA,Blank Plates, with all accessories complete. |
| 57 | Supply & Installation of Table POP UP BOX, 8M- 1No. -6A-Switch & Socket -UPS , 1HDMI Splitter, Blank Plates , with all accessories complete. |
| 58 | Internal Lighting Fixtures and its accessories Supplying and erecting Chandelier,,Length = 6 feet x 2 feet. |
| 59 | Supplying and erecting LED Strip light 5m Length Max. 25 to 30 W IP20 class having minimum lumens output of 800 Lumens/m, min. efficacy of 90 lumen/W, CRI>80, CCT upto 5000K, Beam Angle of 110 deg., THD<10%, p.f. >0.95, operating range of 230-270V, Life class of 30,000 Hrs. at L70B50, including drivercomplete. |
| 60 | Supplying and erecting LED square / circular 16 to 20W downlighter having pressure die-cast aluminium housing, opal translucent cover, mounting arrangement with board for surface type or spring loaded mounting clips for flush type complete. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
