Tender For Supply Of 11Kv Metal Parts 3000Sets, Pudukkottai-Tamil Nadu

Supply Of 11Kv Metal Parts 3000Sets--- 1 SUPPLY OF SILICAGEL BLUE 2 0.6KVA UPS 3 11KV METAL PARTS WITHOUT INSULATOR 4 SILICAGEL BLUE 10 TO 12MM 5 Pole pit for 9.0M and 9.14 M PSC/RCC / all metal poles (each pit) 1.25 x 0.6 x 1.83 mtr 6 Ordinary soil 7 Semi rocky soil 8 Heavy rocky soil where blasting/ cheseling required [specific approval should be obtained from concerned EE] 9 Stay pit 10 in ordinary soil [0.95 x 0.6 x 1.2m] 11 semi rocky soil 12 Stay pit in heavy rocky soil where blasting/ cheseling reqiured [specific approval should be obtained from concerned EE] 13 Erection of poles & stays (Including refilling of excavated earth) 14 Erection of 7.5m / 8.0m poles [RCC / PSC] 15 Erection of 9.00m / 9.14m RCC / PSC/Rail pole, Tubular pole and all Metal Poles 16 Stay set 17 Erection stay set complete 18 Stay erection without rod and pit 19 Replacement of stay rod only. (Including stay pit excavation & refilling & erection) 20 Replacement of guy shackle only in existing stay 21 Erection of LINE MATERIALS 22 Fixing of LT 1 ph X Arm 23 Fixing of LT/HT TI Fitting 24 Fixing of LT 3 ph X Arm 25 Fixing of 3[1/2] V` X arm 26 Fixing of4[1/2] V` X arm 27 Fixing of 5 V X arm 28 Fixing of tapping channel / guarding X arm 29 Providing of line spacers in LT lines 1 phase 30 Providing of line spacers in LT lines 3 phase 31 Erection of AB Switch with PT insulator & Jumpering complete 32 Erection of centre rotating Switch AB Switch complete 33 FIXING OF HT PIN INSULATOR / STRAIN DISC 34 11 KV Pin insulator with pin 35 11 KVstrain disc / polymer disc with hardware 36 22 KV Pin insulator with pin 37 22 KV Strain disc / polymer disc with hardware 38 33 KV Pin insulator with pin 39 33 KV PinStrain disc/polymer discwith hardware 40 Fixing of LT Pin insulator with pin 41 LT Shakle with hardware 42 Fixing of Aluminium knob 43 Paving Stringing and sagging of conductor including binding of pin and proper tight [including transport of condutor from Road side to work spot] per run 44 Upto 7/2.59 mm ACSR, 7/2.50 AAAC including PVC cable upto 25 sqmm 45 ACSR 7/3.35mm & 7/ 3.15 AAAC including PVC cable above 25 sqmm 46 ACSR 7/4.09 mm 47 Above 7/4.09 mm ACSR & DOG conductor 48 Earthing wiring and connection including transporting of earth pipe and excavation of pit] 49 Transformer structure earthing 10ft depth - 3 nos of pipe throughTubes 50 DP earthing including all works [double side earthing] 51 Erection of 4th Earth pipe including earthing 52 Earthing of poles 53 Earth pit masonary work 3 nos earth pits or using 3 nos concrete tub. 54 Replacement of detoriated earth pipe per location 55 Concreting with Mixture 1:3:6 [including All materials]. 56 Mass Concreting for centre support for 2 feet including all materials 57 Mass concreting for pole0.6x0.6x1.25M.with coping 58 Sleeve concreting for pole 0.6 m x 0.6m x 0.3 m with coping 59 Sleeve concreting for stay set 0.3 m & 0.75 long 60 Erection of Distribution Transformer Structure Complete 61 Excavation of structure pole Pits 0.9 X0.9 X 1.83 Mtr 62 Transporting of pole to pit location 2 Nos. 63 Erection of poles 2 Nos 64 Excavation of stay pit 4 Nos 65 Erection of stay set (4 sets) 66 Mass concreting (Cement:Sand:Jelly supplied by the contractor) 2 Nos. 67 Erection of 22 KV AB Switch 68 Ttransformer structure earthing 10ft depth - 3 nos of pipe through Earth Tubes 69 Erection of Top Channel 70 Bed Channel [2 nos channel] Erection 71 Cross with stud for bed channel Erection 72 Erection of belting angle / HG fuse angle 73 Erection ofHG fuse Set 74 Erection of HT LAS with jumpering and earthing 75 Erection of LT LAS with jumbering and earthing 76 Erection of Jumpering [HT Side] 77 Transformer wiring in LT side including Jumpering Bus bar etc. 78 Erection LT open type fuse unit arrangement single 79 Erection LT open type fuse unit arrangementDouble 80 Painting of stru. Complete excluding DT [two coat of red oxide] all metal parts(excluding cost of paint). 81 Painting of stru. Complete excluding DT [one coat Alu paint, excluding cost of paint) 82 Colour washing of 2 numbers structure pole [excluding cost of distember / snowsem] 83 Painting name of SS at seating channel including paint. 84 Painting of DT alone [excluding painting] with red oxide and double coating of aluminium paint. 85 DT metering arrangement (without materials) 86 Erection of distribution Transformer /dismantling of DT 87 Upto 100 KVA 88 above 100 KVA and Upto 250 KVA 89 500 KVA 90 Colour washing of RCC / PSC poles 91 Numbering of poles including cost of paint / loc [black background and yellow letters] 92 Painting of SC details in the meter board / Agl boxes / Hut SCs including paint. 93 SERVICE CONNECTION 94 Transporting of required materials from road side to work spot and erection of street light fixture including wiring Clamping of pipe aerial board assembling 95 Transporting of required materials from road side to work spot and erection of 250 WS.V. lamp / Mercury lamp/LED Yard Light Fittingincluding wiring, clamping of pipe, serial board assembling etc. 96 Fixing of street light fitting with 2 CFL/ 4 CFL 97 Provision of St. Lt. switching arrangements including fixing meters, wiring, service board etc. 98 Erection of hut service connection complete with / without meter including transport of 5materials from section store to work spot 99 Erection/dismantling of metering set 11 KV / 22 KV/33 KV 100 Fabrication Works. 101 Labour charges for alteration of back clamp / stay clamp to suitable for works. 102 Providing of Holes. 103 All size angles / channel upto 5/8 104 All size angles / channel above 5/8 105 Slot holes in flat / angles / channel upto 3/4 106 Slot holes in flat / angles / channel above 3/4 107 Fabrication of centre support only for DT structure 108 Cutting of RS Joist / Angles / MS Channels 109 Welding of RS Joist / Angles / MS Channels 110 GENERAL 111 Set right the leaning pole in both HT & LT[ pin point ] location 112 Set right the leaning pole in both HT & LT[ cut point ] location 113 Resagging of lines for all sizes cut point location 114 Converting pin point into cut point HT lines 115 Converting pin point into cut point LT lines 116 Clearing tree branches ofcoconut tree 117 Clearing tree branches of Neem, tamarind, countrytree etc., 118 Releasing and erection 1 ph SC wire [during conductor or support change] 119 Releasing and erection 3 ph SC wire [during conductor or support change] 120 Destruction of pole concerting at site. 121 Retrieving grill from detoriated pole [grill separate from damaged pole] 122 Re earthing of structure completely including earthpipe changing if any 3nos earth pipe 123 Re examination of DT earthing ( Digging , inspection and making connection in between extg. 3nos Earth pipe ) 124 Guarding Arrangement :- 125 Cradle guarding including earthing and earth pit excavation [railway & P&T crossing ] 126 Flat guarding with 4 wire 127 Split Netural Guarding 128 LOADING AND UNLOADING : 129 Loading of 7.5 Mtr / 8.0 Mtr RCC / PSC/ Metal Pole [per pole ] 130 Loading of [ 9.14 mtr ] 9.0 mtr poles RCC /PSC Pole / Metal Pole [ per pole ] 131 Unloading of PSC / RCC / Metal Poles 132 TRANSPORTING FROM ROAD SIDE TO WORKSPOT 133 Transport 7.5 mtrs / 8.00 mtrs of poles including R.S.Joist and Rail Poles Upto 1.0 Km 134 Transport 7.5 mtrs / 8.00 mtrs of poles including R.S.Joist and Rail Poles above additional 1.0 Km or part thereof[ certified by AEE ] 135 Transport of 9.0 mtr and above poles including R.S. Joist and Rail poles upto 1.0 Km 136 Transport of 9.0 mtr and above poles including R.S. Joist and Rail poles upto above additional 1.0 Km or part thereof 137 TRANSPORT OF LINE MATERIALS 138 Transport of line Materials [ minimum 1 MT ]from sub stores to section pocket store ornear to work spot at road side by using private vehicleor vice versa excluding loading and unloading Upto 8 kms 139 Transport of line Materials [ minimum 1 MT ]from sub stores to section pocket store ornear to work spot at road side by using private vehicleor vice versa excluding loading and unloading above 8 Kms and for every addl. 1 KM 140 TRANSPORT OF EQUIPEMENTS 141 Transporting of Distribution Transformer/Metering set by using private vehicleload of one No.MinimumUp to 30 Km 142 .Transporting of Distribution Transformer/Metering set by using private vehicleload of one No.Minimum above 30 Km for every addl .1 KM 143 DISMANTLING WORKS 144 Dismantling of 7.5m / 8.0m poles [RCC / PSC] 145 Dismantling of 9.00m / 9.14m RCC / PSC/Rail pole, Tubular pole and all metal poles 146 Dismantling stay set complete 147 Dismantling of LT 1 ph X Arm / LT/HT TI Fitting 148 Dismantling of LT/HT TI Fitting 149 Dismantling of LT 3 ph X Arm 150 Dismantlingof 3[1/2] V` X arm 151 Dismantlingof Tapping channel and Guarding X Arm 152 Dismantling of 11 KV strain disc/polymer disc with hardware 153 Dismantling of 22 KV Pin insulator with pin 154 Dismantling of 22 KVStrain disc with hardware 155 Dismantling of 33 KV Pin insulator with pin 156 Dismantling of 33 KVStrain disc with hardware 157 Dismantlingof LT Pin insulator with pin 158 Dismantlingof LT Shackle with hardware 159 Dismantling of Aluminium knob 160 Dismantling of Conductor7/2.59 mm ACSR, 7/2.50 AAAC including PVC cable upto 25 sqmm 161 Dismantling of ConductorACSR 7/3.35mm & 7/ 3.15 AAAC including PVC cable above 25 sqmm 162 Dismantling of ConductorACSR 7/4.09 mm 163 SINGLE PHASE METER &3 PHASE METER 164 Fixing of single phase meter 165 Fixing of 3 phase meter 166 Dismantling of single phase meter 167 Dismantling of 3 phase meter

Refer document

INR 10000.0 /-

INR 10 Lakhs /-