|
| 1 | e-tender for Supply and Installation of OPEN GIM.For more details refer tender documents. |
| 2 | ABDOMIAL BOARD - PROVIDEING AND FIXING USING MINIMUM80nb GI BCLASSPIPE FOR MAIN FRAME MINIMUM 32NB GI BCLASSPIPE FOR SIDE FRAME MINIUM 25nb GI PIPEFORINTERMEDIATE PIPE NYLON 66 INJECTION MOULDEDBEARING CAP & PIPE CAP FULLY DONE BY FIREST COATOFPRIMER ? JOTUN BRAD 40-50MICRON THIKNESS ANDTOP COAT OF PURE POLYESTER POWDER WITH 70-80MICRON THICKNESS POWDER COAT INCLUDINGINCULDING COST OF CONCRETE FOUNDATION,ALLMETERIALS,LABOUR,Etc.ALLCOMPLETE AS PER THEINSTRUCTION OF ENGINEER IN CHARGE/equivalent |
| 3 | EXER CYCLE - Providing and fixing Walker single using, Minimum 100 NB GI C-class Pipo- for MAIN FRAME, minimum 32 NB GI B-CLASS Pipe- for LEG FRAME, Minimum 25 NB GI B-CLASS Pipe for HANDLE FRAME, NYLON 66 INJECTION MOULDED CASING CLAMPS, LLDP Roto moulded seat with inbuilt bolts 3/8\" X 1.5\" FOOr REST, Nylon 66 injection Moulded BEARING CAP PIPE CAP, fully Done by first coat of Primer jotun Brad 40-50 Micron thickness and Top Coat of pure polyester powder with 70- 80 micron thickness POWDER COAT including cost of concrete foundation, all materials, labour, etc all Complete as per the instruction of Engineer in-charge |
| 4 | ELLIPTICAL TRAINER - Providing and fixing Bench with fix weight using, 100 NB G.I C-Class pipe for main frame, 32 NB G.I B-Class pipe for Bench frame, 20 N G.I B-Class pipe for Handle frame, fully Done by first coat of Primer -jotun Brad 40-50 Micron thickness and Top Coat of pure polyester powder with 70- 80 micron thickness POWDER COAT including cost of concrete foundation, all materials, labour, etc all complete as per the instruction of Engineer in-charge/equivalent |
| 5 | AIR WALKER -Providing and fixing using Minimum 100 NB GI C-class Pipe for MAIN FRAME, Minimum 25 NB GI B-CLASS Pipe for HANDLE FRAME, LLDP Roto moulded with seat inbuilt bolts 3/8\" X 1.5\" for TWISTER DISC, TRIPPLE Minimum 25 NB & 20 NB GI B-class Pipe for SEATING FRAME, Minimum 80 NB GI B-class Pipe for SEATING FRAME STAND, Minimum 80 NB GI B-CLASS Pipe for TWISTER STAND, Minimum 25 NB GI B-CLASS Pipe for TWISTER HANDLE FRAME, LLDP Plastic- TWISTER DISC, Nylon 66 injection moulded BEARING CAP & PIPE CAP, fully Done by first coat of Primer jotun Brad 40-50 Micron thickness and Top Coat of pure polyester powder with 70- 80 micron thickness POWDER COAT including cost of concrete foundation, all materials, labour, etc all complete as per the instruction of Engineer in-charge/equivalent/equivalent |
| 6 | BENCH WITH FIXED WEIGHT - Providing and fixing using Minimum 100 NB GI C-class Pipe Frame for 32 MAIN Nb FRAME 100 Nb Gi B-class Pipe Leg Gi B class Pipe Handle Frame 25 NB Gi B class Pipe Clamps: Nylon 66 Injection Moulded casing Foot Rest: LIdp Roto moulded Seat with Bolts Inbuilt 3/8\"X1.5\".Pipe Cap: Nylon 66 Injection moulded. Bearing Cap.: Nylon 66 injection moulded. Housing Bearing9 And Pin - seamless pipe and Round Ba bearings: Permanent Sealed of reputed Make (fag/sk Powder coat: Done By Pure Polyester powder with 70 80 Micron Thickness POWDER COAT including cost of Concrete foundation complete as per the instruction of Engineer in-charge/equivalent |
| 7 | STANDING TWISTER TRIPPLE - Providing and fixing using Minimum 100 NB GI C-class Pipe forMAIN FRAME, Minimum 25 NB GI B-CLASS Pipe for HANDLEFRAME, LLDP Roto moulded with seat inbuilt bolts 3/8\" X 1.5\"for TWISTER DISC, TRIPPLE Minimum 25 NB & 20 NB GI B-class Pipe for SEATING FRAME, Minimum 80 NB GI B-classPipe for SEATING FRAME STAND, Minimum 80 NB GI B-CLASS Pipe for TWISTER STAND, Minimum 25 NB GI B-CLASS Pipe for TWISTER HANDLE FRAME, LLDP PlasticTWISTER DISC, Nylon 66 injection moulded BEARING CAP &PIPE CAP, fully Done by first coat of Primer jotun Brad 40-50Micron thickness and Top Coat of pure polyester powder with70- 80 micron thickness POWDER COAT including cost ofconcrete foundation, all materials, labour, etc all complete asper the instruction of Engineer in-charge/equivalent |
| 8 | LEG PRESS - Providing and fixing using Minimum 100 NB GI C-class PipeFrame for 32 MAIN Nb FRAME 100 Nb Gi B-class Pipe Leg GiB class Pipe Handle Frame 25 NB Gi B class Pipe Clamps:Nylon 66 Injection Moulded casing Foot Rest: LIdp Rotomoulded Seat with Bolts Inbuilt 3/8’X1.5’.Pipe Cap: Nylon 66Injection moulded. Bearing Cap.: Nylon 66 injection moulded.Housing Bearing9 And Pin - seamless pipe and Round Babearings: Permanent Sealed of reputed Make (fag/sk Powdercoat: Done By Pure Polyester powder with 70 80 MicronThickness POWDER COAT including cost of Concretefoundation complete as per the instruction of Engineer in-charge/equivalent |
| 9 | PULL UPS -Providing and fixing using Minimum 100 NB GI C-class Pipe forMAIN FRAME Galvanised steel, Fasters :Stainless steel 304grade with polycopid Post top Cap : G.. post of wall thickness3mm Handle frame size 32mm/1.25\" OD GI post of wallthickness 3 mm Powder coat: Done by Pure Polyester powderwith 70- 80 Micron Thickness POWDER COAT including cost ofconcrete foundation. all materials, labour, etc all complete asper the instruction of Engineer in-charge/equivalent |
| 10 | HAND ROWER - Providing and fixing Rider using, Minimum 100 NB G C-classPipe- for MAIN FRAME, Minimum 32 NB GI B CLASS pipe forSEAT FRAME, Minimum 40 NB & 25 NB B CLASS GI B-CLASS Pipe for HANDLE FRAME Minimum 32NB & 25NB GIB-CLASS pipe with two handles for LEG REST, LLDP Rotomoulded seat with inbuilt bolts 3/8\" X 1.5\" for FOOT REST &SEAT RESST. Nylon 66 injection moulded BEARING CAP &PIPE CAP, fully Done by first coat of Primer- jotun Brad 40 50Micron thickness and Top Coat of pure polyester powder with70- 80 micron thickness POWDER COAT including cost ofconcrete foundation, all materials labour, etc all complete asper the instruction of Engineer in-charge/equivalent |
| 11 | CHEST PRESS CUM SHOULDER PRESS- Providing and fixing using Minimum 100 NB GI C-class Pipe forMAIN FRAME 100 Nb Gi B-class Pipe Leg Frame: 32 Nb Gi Bclass Pipe Handle Frame 25 NB Gi B class Pipe Clamps: Nylon66 Injection Moulded casing Foot Rest: Lidp Roto mouldedSeat with Inbuilt Bolts 3/8\"X1.5.Pipe Cap Nylon 66 Injectionmoulded Bearing Cap :Nylon 66 injection moulded. BearingHousing and Pin - seamless pipe and Round Ba bearings:Permanent Sealed of reputed Make (fag/skf) Powder coat: DoneBy Pure Polyester powder with 70- 80 Micron ThicknessPOWDER COAT including cost of concrete foundation. allmaterials, labour, etc all complete as per the instruction ofEngineer in-charge/equivalent |
