Modification/Height Raising Of 220Kv D/C Panki-Fatehpur And 132Kv Dc Naubasta-Mskp And Naubasta-Dada Nagar Transmission Line For Metro Rail At Kanpur, Under Etd-Ii Kanpur. , Part-A , Supply , 220Kv Special Type Mono Pole Tower(30-60)(Bottom Cross Arm Height-34 Mtr.) Complete In All Respect.(Note:- Monopole Has To Be Supplied Within 3 Months From The Date Of Loi) , Tower Accessories , Number Plate , Danger Plate , Phase Plate In Set Of Red,Blue & Yellow , Circuit Plate (Set Of Two) , Providing Of Pipe Type Earthing Equipment Set Consisting Of 32Mm Dia 3050Mm Long Heavy Duty Perforated C Class G.I Pipe 50Mmx6mm Size 4750Mm Long Galvanised Steel Flat And 2 No. 12Mmx40mm G.I Bolts With Nuts & Washers Etc. As Per Technical Specification. , Conductor Accessories For Acsr Zebra , Vibration Dampers , Mid Span Compression Joint , Repair Sleeves , Hardware Fittings For Zebra Conductor , Single Tension Fitting , Double Tension Fitting , 160Kn, 220Kv Polymer Insulator , 24 Fibre Opgw Accessories , 24 Fiber (Dwsm) Opgw Fiber Optical Cable , Joint Box , Supply And Installation Of Hardware Set For 24Fibre Opgw , Schedule Of Erection , Detailed Survey Including Preparation Of Final Tower Schedule Of Route. Marking Of Location As Required For Diversion Work. , Check Survey & Final Peg Marking As Required For Diversion Work. , Soil Investigation Test (All Kind Of Soil) , Design Of 220Kv Special Type Mono Pole Tower(30-60)(Bottom Cross Arm Height-34 Mtr.) Lncluding Anchor Bolts, Anchor Plates, Nuts, Bolts, Washers & Ladder Etc. And All Other Accessories To Complete In All Respect. , Excavation Of Foundation Of 220 Kv Special Mono Pole Tower (30-60) (34 Mtrs. Bottom Cross Arms)Including All Earth Work, Back Filling. Ramming And Levelling Etc. Including Cost Or Borrowed Earth (If Required) And Also Setting Of Shuttering For Beware Collapsing Of Near About House, Setting Of Anchor Bolts And Including Foundation Concreting With M- 20/25 Grade Concrete For All Types Mono Pole Foundations Including Cost Of Cement, Sand, Stone, Ballast Forming Curing. Shorting Shuttering But Excluding Cost Of Reinforcement Steel Bars. , Complete Erection Of 220 Kv Special Mono Pole Tower (30-60) (34 Mtrs. Bottom Cross Arms) Having All Three Phases I.E. R, Y & B With The Help Of Hydraulic Crane Of Suitable Capacity (Crane Including Soil Dressing. Soil Ramming. Dismantling Of Wall And Transportations.(Note:- Monopole Erection Should Be Completed Within 02 Days From The Date Of Shutdown) , Carriage Of New Material Such As Conductor, Hardware, Tower Parts Etc. From Store To Site. , Tack Weldingup Toiind Section Of Narrow Base D/C Tower. , Anchoring Of Section Towers By Providing Stay On Cross Arms Of Section Towers Before Removal Of Old Conductors Including Siutable Fixing Of Stay Rod By Naking Cc Foundations And Removal There Of After Completion Of Work ( One Job Per Arm) , Laying Stringing Tensioningclamping Jointing Etc. Complete With Acsr Zebra Conductor For D/C Line (All 06 Conductor) Including Hosting Of Insulators, Fittingof All Required Hardware & Accessories Etc.(Note:- Stringing Of Conductor Should Be Completed Within 02 Days From The Date Of Completion Of Erection) , Laying Stringing , Tensioning , Clamping Jointing Etc. Complete With Opgw.(Note:- Stringing Of Opgwshould Be Completed Within 02 Days From The Date Of Completion Of Erection) , Splicing & Installation Of Joint Box (24 Fibre) , Earthing Of Tower With Pipe Type Earthing Incuding By Putting The G.I Pipe At Least 600Mm Below Ground Level And At Least 3650Mm Away From The Tower Itself And Connecting The G.I Strip Of The Pipe With Bolt Holes In The Leg Members Joining The Bottom Most Bracing Of The Tower By Making About 300Mm Dia ,3750Mm Deep Pit At A Distance Of Not Less Than 3650Mm Away From The Stubs And Finally Filling The Pit With Finally Broken Coke Having The Granules Sizes Not More Than 25Mm And Salt In Such A Way That Minimum Cover Of 125Mm Thick Salt Mixed Coke Shall Be Maintained Around The Pipe On All Sides And The Top Edge Of The Pipe And G.I Strip Shall Be At Least 600Mm Below The Ground Level, Complete In All Respect As Per Technoical Specifications, With All Cost Of Men , Materials, Misc., Consumables, T&Ps Etc Required For The Job Including The Pipe Type Earthing Set (02 No. For Each Tower To Be Earthed). , Destringing Of Opgw Including All Accessories. , Dismantling Of Old 220Kv Towers.(Note: The Tower Parts Will Have To Be Dismantled With Utmost Care So That These Tower Parts Are Not Damaged And Can Be Reused) , Dismantling Of Acsr Deer Conductor Of Both Circuits Including Fittings. Armour Rod , Vibration Damper Insulator String Etc. And Attending Blockage Of Nh For Destringing With Extra Man Power. , Safe Loading Transportation. Unloading And Stacking Of Dismantled Tower Structure, Conductor, Opgw Etc. From Workplace To Naubasta Store. (Distance- 01Km Approx.) , Providing Barricades For Avoiding Any Accident During Excavation Of Soils. , Hot Line Stringing Between The Towers (Nbdd+18And 220 Kv Special Mono Pole Tower (30-60) (34 Mtrs. Bottom Cross Arms)) Crossing Of Thenational Highway(Nh-86/Nh-34) Includes Laying, Tensioning, Stringing, Clamping, Jointing Etc. Complete With Acsr Zebra Of All Phases Of Both Circuits Including Hoisting Of Insulator Fittings Of All Neccessory Hardware And Accessories Etc.(Note: No Traffic Block Of Nh Will Be Arranged To Complete The Work) , Part-B , Supply , 132Kv Special Type Mono Pole Tower(0-15)(Bottom Cross Arm Height-17 Mtr.) Complete In All Respect.(Note:- Monopole Has To Be Supplied Within 3 Months From The Date Of Loi) , 132Kv Special Type Mono Pole Tower(30-60)(Bottom Cross Arm Height-32 Mtr.) Complete In All Respect.(Note:- Monopole Has To Be Supplied Within 3 Months From The Date Of Loi) , Tower Accessories , Number Plate , Danger Plate , Phase Plate In Set Of Red,Blue& Yellow , Circuit Plate (Set Of Two) , Providing Of Pipe Type Earthing Equipment Set Consisting Of 32Mm Dia 3050Mm Long Heavy Duty Perforated C Class G.I Pipe 50Mmx6mm Size 4750Mm Long Galvanised Steel Flat And 2 No. 12Mmx40mm G.I Bolts With Nuts & Washers Etc. As Per Technical Specification. , Conductor Accessories For Panther , Vibration Dampers , Mid Span Compression Joint , Repair Sleeves , Hardware Fittings For Panther Conductor , Single Tension Fitting , Double Tension Fitting , 120Kn, 132Kv Polymer Insulator , Hardware Andaccessories For Gs Earthwire 7/3.25Mm , Tension Clamp , Vibration Dampers , Mid Span Compression Joint , Copper Bond , Schedule Of Erection , Detailed Survey Including Preparation Of Final Tower Schedule Of Route. Marking Of Location As Required For Diversion Work. , Check Survey & Final Peg Marking As Required For Diversion Work. , Soil Investigation Test (All Kind Of Soil) , Design Of 132 Kv D/C Special Monopole Type Towers Lncluding Anchor Bolts, Anchor Plates, Nuts, Bolts, Washers & Ladder Etc. And All Other Accessories To Complete In All Respect. , Excavation Of Foundation Of 132 Kv D/C Special Monopole Type Towers Including All Earth Work, Back Filling. Ramming And Levelling Etc. Including Cost Or Borrowed Earth (If Required) And Also Setting Of Shuttering For Beware Collapsing Of Near About House, Setting Of Anchor Bolts And Including Foundation Concreting With M- 20/25 Grade Concrete For All Types Mono Pole Foundations Including Cost Of Cement, Sand, Stone, Ballast Forming Curing. Shorting Shuttering But Excluding Cost Of Reinforcement Steel Bars. , 132Kv Special Type Mono Pole Tower(0-15)(Bottom Cross Arm Height-17 Mtr.) Complete In All Respect. , 132Kv Special Type Mono Pole Tower(30-60)(Bottom Cross Arm Height-32 Mtr.) , Carriage Of New Material Such As Conductor, Hardware, Tower Parts Etc. From Store To Site , Complete Erection Of 132 Kv Special Monopole Type Towers Having All Three Phases I.E. R, Y & B With The Help Of Hydraulic Crane Of Suitable Capacity (Crane Including Soil Dressing. Soil Ramming. Dismantling Of Wall And Transportations Of: (Note-Erection Of Monopoles Has To Be Completed With In 02 Days From The Date Of Shutdown) , Special Mono Pole Tower (0-15) (17 Mtrs. Bottom Cross Arms) Complete In All Respect , Special Mono Pole Tower (30-60) (32 Mtrs. Bottom Cross Arms) Complete In All Respect , Tack Weldingup Toiind Section Of Narrow Base D/Ctowers. , Anchoring Of Section Towers By Providing Stay On Cross Arms Of Section Tower Before Removal Of Old Conductors Including Suitable Fixing Of Stay Rod By Making C.C Foundations And Removal Thereof After Completion Of Works (01 Job Per Cross Arm) , Laying Stringing Tensioningclamping Jointing Etc. Complete With Acsr Panther Conductor For D/C Line (All 06 Conductor) Including Hosting Of Insulators, Fittingof All Required Hardware & Accessories Etc.(Note-Conductor Stringing Has To Be Completed With In 02 Days After Completion Of Tower Erection) , Laying Stringing , Tensioning , Clamping Jointing Etc. Complete With Earthwire(Note-Earthwire Stringing Has To Be Completed With In 02 Days After Completion Of Tower Erection) , Earthing Of Tower With Pipe Type Earthing Incuding By Putting The Gi Pipe At Least 600Mm Below Ground Level And At Least 3650Mm Away From The Tower Itself And Connecting The G.I Strip Of The Pipe With Bolt Holes In The Leg Members Joining The Bottom Most Bracing Of The Tower By Making About 300Mm Dia ,3750Mm Deep Pit At A Distance Of Not Less Than 3650Mm Away From The Stubs And Finally Filling The Pit With Finally Broken Coke Having The Granules Sizes Not More Than 25Mm And Salt In Such A Way That Minimum Cover Of 125Mm Thick Salt Mixed Coke Shall Be Maintained Around The Pipe On All Sides And The Top Edge Of The Pipe And G.I Strip Shall Be At Least 600Mm Below The Ground Level, Complete In All Respect As Per Technoical Specifications, With All Cost Of Men , Materials, Mis., Consumables, T&Ps Etc Required For The Job Including The Pipe Type Earthing Set (02 No. For Each Tower To Be Earthed). , Destringing Of Earthwire Including All Accessories. , Dismantling Of Old 132Kv Towers.(Note: The Tower Parts Will Have To Be Dismantled With Utmost Care So That These Tower Parts Are Not Damaged And Can Be Reused) , Dismantling Of Acsr Panther Conductor All Three Phase Including Fittings. Armourrod , Vibration Damper Insulator String Etc. And Attending Blockage Of Nh For Destringing With Extra Man Power. , Safe Loading Transportation, Unloading And Stacking Of Dismantled Tower Structure Conductor Earthwire Etc. From Workplace To Mskp Store. (Approx. Distance 05Km) , Providing Barricades For Avoiding Any Accident During Excavation Of Soils. , Hot Line Stringing Between The Towers (Nbdd+18And 132 Kv Special Mono Pole Tower (30-60) (32 Mtrs. Bottom Cross Arms)) Crossing Of Thenational Highway(Nh-86/Nh-34) Includes Laying, Tensioning, Stringing, Clamping, Jointing Etc. Complete With Acsr Panther Of All Phases Of Both Circuits Including Hoisting Of Insulator Fittings Of All Neccessory Hardware And Accessories Etc.(Note: No Traffic Block Of Nh Will Be Arranged To Complete The Work) , Hot Line Stringing Between The Towers (Nbdd+18And 220 Kv Special Mono Pole Tower (30-60) (34 Mtrs. Bottom Cross Arms)) Crossing Of Thenational Highway(Nh-86/Nh-34) Includes Laying, Tensioning, Stringing, Clamping, Jointing Etc. Complete With Acsr Zebra Of All Phases Of Both Circuits Including Hoisting Of Insulator Fittings Of All Neccessory Hardware And Accessories Etc.(Note: No Traffic Block Of Nh Will Be Arranged To Complete The Work)
