Military Engineer Services-MES has published Provision Of 05 X Guard Rest Rooms Along The Perimeter Security Wall At Khunmoh Garrison Under Ge 861 Ews.. Submission Date for this Tender is 25-03-2023. Building Work Tenders in srinagar Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 18-Mar-2023 | Amendment to BOQ | BOQ | 25-03-2023 |
| Sl. No. | Item Description |
| 1 | Surface dressing not exc 15cm deep in any type of soil, complete all as specified and directed. |
| 2 | Surface excavation not exc 30cm deep & averaging 15cm deep and getting out in any type of soil, complete all as specified and directed. |
| 3 | Excavation in trenches, not exc 1.5 mtr wide and not exc 1.5 mtr deep and getting out in hard/dense soil for foundation, cesspits, manholes, sewage lines, laying of cables/pipe etc and getting out, complete all as specified and directed. |
| 4 | Excavation over areas, not exceeding 1.5 mtr deep and getting out in soft/loose soil, complete all as specified and directed. |
| 5 | Excavation over areas, exceeding 1.5 mtr deep but not exceeding 3.0 mtr deep and getting out in soft/loose soil, complete all as specified and directed. |
| 6 | Excavation in trenches, not exc 1.5 mtr wide and not exc 1.5 mtr deep and getting out in hard rock soil for foundation, cesspits, manholes, sewage lines, laying of cables/pipe etc and getting out, complete all as specified and directed. |
| 7 | M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation, filling in and mass concrete, complete all as specified and directed. |
| 8 | M&L for RCC M-25 Grade (design mix) as in foundation, raft footing, foundation beams, plinth beams, bases for columns etc, basement slabs, under-reamed piles and mass concrete, complete all as specified and directed. |
| 9 | M&L for RCC M-25 Grade (design mix) as in columns, pillars, piers, post and struts etc,complete all as specified and directed. |
| 10 | M&L for RCC M-25 Grade (design mix) as in slabs supported on walls, beams and colomns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed. |
| 11 | M&L for RCC M-25 Grade (design mix) as in roof beams, cantilevers, bressummers, lintels over 1.5 mtr clear span,complete all as specified and directed. |
| 12 | Formwork to sides of rough finished surfaces of concrete foundation, footing, bases of columns, raft beams, side and soffits (if any) of foundation, plinth beam and similar work, complete all as specified and directed. |
| 13 | Formwork to rough finshed surfaces of concrete of sides and soffits of floor or roof beams, lintel beam, cantilevers, shelves including supports, overhangs etc, complete all as specified and directed by Engr-in-Charge. |
| 14 | Formwork to rough finished surfaces of soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping), complete all as specified and directed by Engr-in-Charge. |
| 15 | Formwork to rough finished surface of concrete sides of columns, pillars as in square, rectangular or polygonal etc, complete all as specified and directed. |
| 16 | S&F TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed by Engr-in-Charge. |
| 17 | S&F TMT Mild steel bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed by Engr-in-charge. |
| 18 | All as per ser item No 17.00 here-in-above but 5mm dia and over upto and including 10mm dia in stirrups, spaces and binders. |
| 19 | M&L for brick work with sub class "B" bricks, old size, straight or curved on plan exceeding 6 metre mean radius, built in cement mortar 1:6, complete all as specified and directed by Engr-in-Charge. |
| 20 | M&L for brickwork with sub class "B" bricks, old size, straight or curved on plan exc 6 mtr mean radius, half brick thick wall, built in CM 1:4, complete all as specified and directed by Engr-in-Charge. |
| 21 | M&L for rendering 10mm thick in CM 1:6 on brick work or concrete surfaces, finished the surface even and fair without using extra cement, complete all as specified and directed. |
| 22 | M&L for rendering15mm thick in CM 1:4 using WPC @3% weight of cement on fair faces of brick work or concrete surfaces of walls, finished the surface even and smooth without using extra cement, complete all as specified and directed. |
| 23 | M&L for rendering 15mm thick in CM 1:6 on brick work or concrete surfaces, finished the surface even and fair without using extra cement, complete all as specified and directed. |
| 24 | M&L for rendering 10mm thick in CM 1:4 on brick work or concrete surfaces, finished the surface even and fair without using extra cement, complete all as specified and directed. |
| 25 | Supply only integral water proofing compound (ISI Marked) of approved make. |
| 26 | M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of wall primer, complete all as specified and directed. |
| 27 | M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistance primer, complete all as specified and directed. |
| 28 | M&L for 3mm thick cement base white wall care putti in two coats (each coat not less than 1mm thick), finished the surface even and smooth with using sand paper, complete all as specified and directed. |
| 29 | M&L for 100mm thick PCC 1:4:8, type D-2 (using 40mm graded crushed stone aggregate) as in sub base of floor, finshed the surface even and fair, complete all as specified and directed. |
| 30 | M&L for 25mm thick PCC 1:2:4, type B-0 (using 12.5mm graded crushed stone aggregate) as in level course, finshed the surface even and fair, complete all as specified and directed. |
| 31 | M&L for Moorum / Red Bajari, filling in floors or pavings, laid in layers not exc. 15cm thick, spread, levelled and rammed including watering, complete all as specified and as directed. |
| 32 | M&L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection/ path, finished the surface even and smooth without using extra cement and joints shall be filled with mixture of bitumen and sand (1:3) by wight, complete all as specified and directed. |
| 33 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm thick, complete all as specified and directed. |
| 34 | Removing excavated material/soils to a distance not exc. 50 mtr and depositing where directed at a level not exc.1.5 mtr above the starting point, complete all as specified and directed. |
| 35 | M&L for mild steel work in roof trusses (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections, post) including distance pieces, cleats etc, conforming to Fe-290 Grade E-165, complete all as specified and directed. |
| 36 | S&F 10mm thick MS plates (plain or chequred) square cut or notched (ordinary and counter sunk) forming holes, weldied incl all necessary bolting or riveting etc with roof trusses, complete allas specified and directed. |
| 37 | S&F mild steel flat iron of size 40x6mm thick as in wind ties for roof covering, securing with bolts etc including all necessary drilling, bolting or reveting etc and similar work, confroming to Fe 290 gde E 165, complete all as specified and directed. |
| 38 | S&F 0.50mm thick prepainted galvalume aluminum zinc coating GI based corrugated steel sheet of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 39 | S&F 0.50mm thick prepainted galvalume aluminum zinc coating GI based plain steel sheet of an colour having tensile strength of 550 Mpa as in ridges, hips, valley etc, fixed with self tapping screws, complete all as specified and directed. |
| 40 | S&F 0.63mm thick plain, galvanised, mild steel sheeting as in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275,complete all as specified and directed. |
| 41 | S&F anodised aluminium snap grid of size 605mmx605mm frame work for false ceiling including straining with GI wire 4mm dia, complete all as specified and directed. |
| 42 | S&F 10mm thick PVC insulation panels with EPS stuck to 1mm thick plain PVC sheet suitably placed in false ceiling grid made of aluminium/GI/MS as per specification and drawing, complete all as specified and directed. |
| 43 | M&L for machine cut, Kota stone slab flooring 25-25mm thick (size of slab 550x550mm) as in flooring, laid over and including 20mm thick screed bed in CM 1:3 and jointed and pointed with grey cement slury mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed. |
| 44 | All as per ser item No 43.00 here-in-above but as in skirting, dados, riser of steps and pillar, fixed over and including 10mm thick rendering in CM 1:3. |
| 45 | M&L for non skid ceramic coloured tiles 7 to 8mm thick, area of each tile exc 0.11 Sqm but not exceeding 0.18 Sqm each as in floor, set and jointed in neat cement slurry & pointed in white or colored cement to match the shade of tile, laid/ fixed over and incl 15mm thick screed bed in C:M 1:4, complete all as specified and directed. |
| 46 | M&L for glazed ceramic dark shade glossy colored tiles of size 350mm x 450mm x 7mm thick, as on vertical surfaces etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, fixed over and including 10 thick rendering in CM 1:4, complete all as specified and directed. |
| 47 | S&F 35mm thick factory made second class hard wood,plain framed, panelled shutters (two Nos of panels) with lock rail and panel of 9mm thick BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressuretreated and fixed at site, complete all as specified and directed. |
| 48 | S&F llnd class hard wood glazed and skelton shutters 35mm thick prepared to received guage etc (divided into squares with plain, chamfered or rounded, mitered and rebated sash bars, any numbers) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass or guage etc. Size of members of shutters as per SSR Part-I Section VIII clause 8.24 (a), complete all as specified and directed. |
| 49 | S&F box type steel windows with side hung shutters including projecting type hinges with steel handle, tower bolt and steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified and directed. |
| 50 | S&F box type steel windows with side hung shutters including projecting type hinges with steel handle, tower bolt and steel peg stay, complete without glazing bars, dovetailed or welded, complete all as specified and directed. |
| 51 | S&F steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed. |
| 52 | S&F pressed steel frames of cross section 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified and directed |
| 53 | M&L for cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in back filling of chowkat and hold fast block etc, complete all as specified and directed by Engr-in-Charge. |
| 54 | S&F solid PVC door frame of size 50x47mm made out of 5mm thick plain colour PVC sheet reinforced with MS Square tube, suppling & fixing in opening as per specification & drawing. |
| 55 | S&F 30mm thick factory made solid panel PVC door shutter (style) consisting of frame made out of MS tubes for top & bottom rails,MS frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 56 | S&F 250mm long aluminium alloy anodised sliding door bolt with hasp and stapple (bolt type) and fixing clips of sheet cast or extruded section with fixing bolts and sliding bolt of extruded section, complete all as specified and directed. |
| 57 | S&F aluminium anodised, barrel tower bolt of extruded section, 150mm length of bolt. |
| 58 | S&F aluminium alloy handles, fabricated type, anodised 150mm size, complete all as specified and directed. |
| 59 | S&F butt hinges, medium weight, cold rolled mild steel, size 100mm, complete all as specified and directed. |
| 60 | S&F mild steel 300mm size, ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and directed. |
| 61 | S&F 3.0mm thick sheet glass, ordinary quality and glazing with oil putty or wooden beads in square not exc 0.50 Sqm in each pane, complete all as specified and directed. |
| 62 | S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with galvanised wire staples, complete all as specified and directed. |
| 63 | S&F 4mm thick figured glass, pin head type and glazing with oil putty in squares not exc 0.50 Sqm in each pane, complete all as specified and directed. |
| 64 | M&L for mild steel framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work and guard bars, conforming to Fe-290 Gde-E-165,complete all as specified and directed. |
| 65 | M&L for mild steel work in joist, channel, angle, or tee sections, fixed independently, without connecting plates etc. (cut to ordinary lengths i.e. within 20mm of the length indicated),conforming to Fe-290 Gde-E-165,complete all as specified and directed. |
| 66 | M&L for preparation of new wooden surfaces or articles of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. |
| 67 | M&L for preparation of new steel or iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed. |
| 68 | S&F bevelled edge mirror of size 600x450mm of selected quality glass, mounted on 6.0mm thick AC building board or commercial plywood, fixed to plugs with CP brass screws and cup washers, complete all as specified and directed. |
| 69 | S&F 125mm dia SS grating, complete all as specified and directed. |
| 70 | M&L for 15mm bore GI tube medium grade with all fittings, laid in trenches, under floor, ceiling or fixed to wall, complete all as specified and directed. |
| 71 | M&L for 20mm bore GI tube medium grade with all fittings, laid in trenches, under floor, ceiling or fixed to wall, complete all as specified and directed. |
| 72 | M&L for 25mm bore GI tube medium grade with all fittings, laid in trenches, under floor, ceiling or fixed to wall, complete all as specified and directed. |
| 73 | M&L for lagging to 20mm bore pipes used in external water supply of plumbing all around with 25mm thick bonded mineral wool preformed SNAPON, pipe section of density 144 Kg/Cum conforming to IS-9842 and provide chicken wire mesh netting 25 gauge 20mm meshing and Plaster of Peris 3 to 5 mm thick all around the mesh after breaking and removing old existing lagging material, complete all as specified and directed. |
| 74 | M&L for cutting of existing 40/80mm dia CI/GI water mainline in any position in trenches for insertion of tee for taking branch connection including excavation, earth work, returning filling, complete all as specified and directed. |
| 75 | S&F Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40 gms), complete all as specified and directed. |
| 76 | S&F 110mmbore PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches or floor, complete all as specified and directed. |
| 77 | S&F 75mmbore PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches or floor, complete all as specified and directed. |
| 78 | S&F 110mm bore PVC (SWR) bend, complete all as specified and directed |
| 79 | S&F 75mm bore PVC (SWR) bend, complete all as specified and directed |
| 80 | S&F 75mmbore PVC (SWR) vent cowl, complete all as specified and directed. |
| 81 | S&F 15mm bore bib tap, cast copper alloy, CP, fancy type with crutch or butterfly handle, screwed down, screwed for brass ferrule, complete all as specified and directed. |
| 82 | S&F 15mm bore stop/angle valve, cast copper alloy CP,fancy type, high presure with butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed. |
| 83 | S&F brass CP shower rose 125mm size, fixed to 15mm bore GI pipe or union, complete all as specified and directed. |
| 84 | S&F vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440mm white, with integral foot rests including cast iron "P" or "S" trap and including provision of cement concrete and making good to floors, complete all as specified and directed. |
| 85 | S&F 10 litres capacity PVC valveless, syphonic action type flushing cistern, low level, white with inlet, ball valve, float and handle including brackets with flush pipe 32mm dia, complete all as specified and directed. |
| 86 | S&F vitreous China Urinal, full stall type, white including bedding urinal against wall in CM 1:2, securing urinal to plugs with and including 60mm long brass screw and pointing around urinal and including automatic flushing system with (flush pipe, grating union and waste pipe), complete all as specified and directed. |
| 87 | S&F vitreous china wash hand basin, white, flat back of size 550x400mm including brackets & including cutting for and pinning in ends of brackets and making good in CM 1:4 andincluding 32mm dia CP waste coupling and waste pipe of 32mm bore and 15mm bore pillar tape cast copper alloy, CP with capstan head, complete all as specified and directed. |
| 88 | S&F 100mm cast iron sanitary connection socket to fit WC out-let, complete all as specified and directed. |
| 89 | S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement, complete all as specified and directed. |
| 90 | S&F rotational moulded polyethylene water storage tank (triple layered) cylindrical vertical with closed top of capacity 500 litres, hoisted and fixed in position with connecting ports (inlet, outlet and over flows) and including 20mm bore ball brass valve, complete all as specified and directed by Engr-in-charge. |
| 91 | S&F 20mm bore gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed. |
| 92 | S&F 15mm size PVC connection with PTMT nuts, length 600mm long, complete all as specified and directed. |
| 93 | S&F aluminium door/windows/vents of exturded aluminium section consisting of frame verticle and horizontal members of size 100mm x 45mm x 2.5mm thick with shutter stile 85mm x 45mm x 2.5mm thick top middle and bottom rail of size 101.60 mmx 44.5mm with 5.50 mm thick tinted sheet glass/steel wire mesh and PVC prelaminated particle board 10 to 12mm thick with aluminium beading and rubber gasket/beading including fixing of hydralulic floor spring one in single leaf or two nos in double leaf door. One mortice lock for aluminium door (each) and two Nos 200mm long aluminium tower bolts and two nos aluminium handles D type for each door. Fixing with rawl plug including rectification of floor/wali to match the existing surfaces, complete all as specified and directed. |
| 94 | M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in bed to drain pipes including packing under and haunching against the sides of pipes of 150mm bore after they are laid and tested,complete all as specified and directed. |
| 95 | Supply and laying 150mm bore salt glazed stoneware drain pipes, laid in trenches and jointed, complete all as specified and directed. |
| 96 | M&L for cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in copings, benching, haunching including necessary formwork, complete all as specified and directed. |
| 97 | M&L for precast cement conrete 1:2:4, type B-1(using 20mm graded crushed stone aggregate) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and set in CM 1:4, complete all as specified and directed. |
| 98 | M&L for brick work with old size fly ash bricks in one brick thick honey comb walling, built in CM 1:4, complete all as specified and directed. |
| 99 | M&L for hardcore of broken bricks of guage not exc 63mm, filling in soak well, complete all as specified and directed. |
| 100 | M&L for point wiring (concealed type) with 1.5 Sqmm copper conductor (multistranded) PVC insulated and unsheatheted FRLS electric cable 1100 volts grade wiring in PVC conduit of suitable size with all fittings & accessories and including PVC insulated electric cable 1100volts 1.5 Sqmm (multistranded) copper conductor single core (Green colour) cable as continious earth wire connected to common earth dolly including sunk sheet terminal box made out of 1.6mm thick MS sheet, covered with 3 mm thick plastic laminated sheet for one light point / fan point / bell point, complete all as specified and directed. |
| 101 | All as per Ser item No. 100.00 above but for one 3 pin 5 Amp socket outlet on the independent board. |
| 102 | All as per Ser item No. 100.00 above but for one 3 pin 5 Amp socket outlet on the same board with other switches. |
| 103 | All as perSer item No 100.00 above, but for one socket outlet 15 Amp on the independent board with 2.5 Sqmm copper conductor multistranded FRLS PVC insulated and sheathed electric cable 1100 Volt grade including PVC insulated and unsheathed FRLS electric cable 1100 volt 2.5 Sqmm copper stranded conductor as continious earth wire connected to common earth dolly. |
| 104 | S&F switch socket combination outlet 5 and 15 Amp, 2 in 1, flush type, complete all as specified and directed. |
| 105 | S&F switch socket comnbination, 3 pin, 5/6 Amps, flush type, complete all as specified and directed. |
| 106 | S&F socket outlet, 3 pin, 5 Amps, flush type, complete all as specified and directed. |
| 107 | S&F switch piano, flush type, 5/6 Amp, one way, 240 volt, complete all specified and directed. |
| 108 | S&F fan regulator electronic dimmer, 450 Watt, 250 volt, flush type, complete all as specified and directed. |
| 109 | S&F angular type lamp holder, PVC / Polycarbonate body with back plate, complete all as specified and directed. |
| 110 | S&F ceiling rose 3 terminal, size 65mm x 50mm, surface bakelite, complete all specified and directed. |
| 111 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed. |
| 112 | S&F LED lamp 9 Watt. |
| 113 | S&F MCB SP 5 to 32 Amps, 230 volts "B" curve, 50 Hz, AC, 10 KA, complete all as specified and directed. |
| 114 | S&F MCB SPN 63 Amps, 230 Volts "C" curve, 50 Hz, AC, 10 KA, complete all as specified and directed. |
| 115 | S&F sheet metal enclosure, factory made, double door shutter for DB SPN, 240 Volts, 12 ways with 200 Amps rated bus bar, neutral link, earth bar, complete all as specified and directed. |
| 116 | S&F LED building security light fitting 35 Watt, 230 Volt, AC, outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection, complete all as specified and directed. |
| 117 | S&F LED light fitting 1x10Watt bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed. |
| 118 | S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC), complete all as specified and directed. |
| 119 | S&F exhaust fan, steel body, heavy duty, AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete including connecting up with 3 core flexible copper conductor cable of size of 1.5 Sqn from ceiling rose, complete all as specified and directed. |
| 120 | S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc, complete all as specified and directed. |
| 121 | Supply & Laying XLPE insulated, armoured heavy duty electric power cable with aluminium conductor, 1100 volts grade, cross sectional area 16 Sqmm 2 Core, complete all as specified and directed. |
| 122 | M&L for dry river sand, laid in trenches for cable protection, as 15cm thick below the cable and 8cm thick above the cable after laying, complete all as specified and directed. Note :- Punned thickness of sand shall be measured & paid. |
| 123 | M&L for sub class "B" brick, old size, as in covering or protection of electric cable, laid dry flat transversally along the length of cable on sand cushioing with width equal to length of brick etc, complete all as specified and directed. |
| 124 | M&L for earthing complete with galvanised mild steel earth plate electrode of size 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected with GI wire 4mm dia by means of lugs, bolts, nuts, check nuts, washers of galvanised iron or steel, GI protection pipe of 15mm bore, light grade including earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, 20mm bore GI watering pipe medium grade, GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B-1 duly reinforced with TMT bars 8mm dia at the rate of 150mm center to centre spacing in both way with suitable lifting handle and pit/ chamber in PCC 1:3:6 type C-1, for pit cover and connecting to main switch board / Main DB’s including testing on completion,complete all as shown in electric plate No. 3 of SSR Part-I and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
