National Security Guard-NSG has published Tender For Repair And Renovation Of Toilet Blocks Of Ranger Barracks Of Esg Unit At Nsg Garrison Manesar Gurgaon (Haryana) For Year 2022-23 Sh Civil And Elect Work. Submission Date for this Tender is 02-03-2023. Barrack Tenders in manesar Haryana. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | C O N C R E T E W O R K |
2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
3 | 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
4 | 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) |
5 | Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth. |
6 | REINFORCEDCEMENT CONCRETE |
7 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
8 | Centering and shuttering including strutting, propping etc. and removal of form for : |
9 | Suspended floors, roofs, landings, balconies and access platform |
10 | Edges of slabs and breaks in floors and walls |
11 | Under 20 cm wide |
12 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete at all levels |
13 | Thermo-Mechanically Treated bars |
14 | B R I C KW O R K |
15 | Brick work withcommon burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: |
16 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
17 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : |
18 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
19 | Brick edging 7cm wide 11.4 cm deep to plinth protection with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including grouting with cement mortar 1:4 (1 cement : 4 fine sand). |
20 | Cladding Work |
21 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias, window jambs horizontal,verticaland similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels.Granite stone slab colour black, Cherry/Ruby red. |
22 | Area of slab below 0.50 sqm |
23 | Area of slab over 0.50 sqm |
24 | Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchenplatform, vanity counter and similar location in marble/ Granite/ stone work, including necessaryholes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. |
25 | Providing and fixing Premium qualityGlazed vitrified wall tiles (GVT) size not less than 300x600 conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
26 | W O O D A N DP. V. C.W O R K |
27 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: |
28 | 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
29 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : |
30 | 300x16 mm |
31 | 250x16 mm |
32 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
33 | 300x10 mm |
34 | 250x10 mm |
35 | 200x10 mm |
36 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
37 | 125 mm |
38 | 100 mm |
39 | Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. |
40 | Providing and fixing to existing door frames. |
41 | 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge. |
42 | S T E E L W O R K |
43 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work (for false ceiling work), including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
44 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : |
45 | 4.0 mm thick glass panes |
46 | F L O O R I N G |
47 | Providing and laying rectifiedGlazed vetified(GVT) matt finished floor tile of size , not less than 600x600 mm(thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in any colour shadow on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqmincluding grouting the joints with white cement and matching pigments etc., complete. |
48 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. |
49 | Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent |
50 | R O O F I N G |
51 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. |
52 | Providing and fixing plain multipurpose cement board(Hight pressure steam cured) with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid seperatately). |
53 | 6 mm thick Cement fiber board as per IS: 14862 |
54 | Providing lead caulked joints to sand cast iron rain water pipes and fittings: ( Including all heights up to 10 meter) |
55 | 100 mm dia Pipe |
56 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type B ( Pressure rating Not less than 06 kg/cm2 ), including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.( Including all heights up to 10 meter) |
57 | 110 mm diameter |
58 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type B (Pressure rating Not less than 06 kg/cm2), including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. ( Including all heights up to 10 meter) |
59 | Single tee with door 110 mm |
60 | Single tee without door 110 mm |
61 | Bend 87.5° |
62 | 110 mm bend |
63 | Shoe (Plain) |
64 | 110 mm Shoe |
65 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. |
66 | 110 mm |
67 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
68 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : |
69 | Ridges plain (500 - 600mm) |
70 | Flashings/ Aprons.( Upto 600 mm) |
71 | F I N I S H I N G |
72 | 12 mm cement plaster of mix : |
73 | 1:6 (1 cement: 6 coarse sand) |
74 | 15 mm cement plaster on the rough side of single or half brick wall of mix : |
75 | 1:6 (1 cement: 6 coarse sand) |
76 | Neat cement punning. |
77 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer"s specification. |
78 | Two or more coats on new work |
79 | Finishing walls with Acrylic Smooth exterior paint of required shade : |
80 | New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) |
81 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
82 | Two or more coats on new work |
83 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wallsurface to prepare the surface even and smooth complete. |
84 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
85 | REPAIRS TO BUILDING |
86 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.( Including all heights up to 10 meter) |
87 | With cement mortar 1:4 (1 cement : 4 course sand) |
88 | Disconnecting damaged overhead/terrace PVC water storage tankof any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in-charge. |
89 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. |
90 | Orissa pattern W.C Pan of size 580x440 mm |
91 | DISMANTLING AND DEMOLISHING |
92 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
93 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
94 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.( Including all heights up to 10 meter) |
95 | In cement mortar |
96 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : |
97 | Of area 3 sq. metres and below |
98 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : |
99 | Of area 3 sq. metres and below |
100 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. |
101 | For thickness of tiles 10 mm to 25 mm |
102 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: |
103 | Asbestos Cement sheet |
104 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : |
105 | 15 mm to 40 mm nominal bore metre |
106 | Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge: |
107 | Up to 150 mm diameter |
108 | Dismantling old plaster or skirting/dado (wall tile) raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
109 | SANITARY INSTALLATIONS |
110 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid |
111 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm , with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : |
112 | Single half stall urinal |
113 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
114 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
115 | Semi rigid pipe |
116 | 32 mm dia |
117 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
118 | Providing and fixing soil, waste and vent pipes : |
119 | 100 mm dia |
120 | Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 |
121 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. |
122 | 100 mm dia |
123 | Sand cast iron S&S as per IS - 3989 |
124 | Providing and fixing plain bend of required degree. |
125 | 100 mm dia |
126 | Sand cast iron S&S as per IS - 3989 |
127 | Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. |
128 | 100x100x100 mm |
129 | Sand cast iron S&S as per IS - 3989 |
130 | Providing and fixing terminal guard : |
131 | 100 mm |
132 | Sand cast iron S&S as per IS - 3989 |
133 | Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter : |
134 | 100 mm |
135 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : |
136 | 100 mm inlet and 100 mm outlet |
137 | Sand Cast Iron S&S as per IS: 3989 |
138 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. |
139 | 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. |
140 | WATER SUPPLY |
141 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. |
142 | 20 mm nominal dia Pipes |
143 | 25 mm nominal dia Pipes |
144 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall( Including all heights up to 10 meter) |
145 | 25 mm dia nominal bore |
146 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : |
147 | 25 to 40 mm nominal bore |
148 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
149 | 25 mm nominal bore |
150 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : |
151 | 25 mm nominal bore |
152 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
153 | 45 cm length |
154 | 15 mm nominal bore |
155 | Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality : |
156 | 20 mm diameter pipe |
157 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work): |
158 | 25 mm nominal bore |
159 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
160 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : |
161 | 15 mm nominal bore |
162 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. |
163 | 15 mm nominal bore |
164 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. |
165 | 15 mm nominal bore |
166 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 18.52.1 15 mm nominal bore |
167 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore |
168 | 15mm nominal bore |
169 | Providing and fixing CP grating of approved quality Circular type, 110 mm dia, with or without25 mm waste hole |
170 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. |
171 | 25 mm nominal bore, 152mm long, weighing not less than 440 gms |
172 | D R A I N A G E |
173 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : |
174 | 100x100 mm size P type |
175 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
176 | Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved qualityL D- 2.5Rectangular shape 600x450 mm internal dimensions |
177 | Raising manhole cover and frame slab to required level including dismantling existing slab and making good the damage as required (Raising depth of manhole to be paid separately) :Rectangular manhole 90x80 cm with rectangular cover 600 x 450 mm of grade LD - 2.5 |
178 | Aluminium works |
179 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fastenersto be paid for separately) : |
180 | For fixed portion |
181 | Powder coated aluminium (minimum thickness of powder coating 50 micron) |
182 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) |
183 | Powder coated aluminium (minimum thickness of powder coating 50 micron) |
184 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): |
185 | With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) |
186 | WATER PROOFING |
187 | Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations:(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 andapproved by Engineer-in-charge including laying glass fibre cloth of pproved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge : |
188 | With average thickness of 120 mm and minimum thickness at khurra as 65 mm. |
189 | Miscellaneous items |
190 | 26 mm thick (average) cement plaster in two layers under layer 20 mm thick cement plaster 1:3 (1cement : 3 Coarsesand) and top layer 6 mm thick cement plaster 1:3 ( 1 cement : 3 fine sand) and providing 28 guage & 18mm hexagonal wire mesh (rabbit/chicken) in between two layers fixed with rawl plugs and "U" nails (cost of wire mesh is inclusive in the rate). |
191 | Providing and fixing 1200 mm X 750 mmmirror with plastic moulded frame havingglass thickness not less then 5mm thick of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
192 | Providing and fixing C.P. brass Pressmatic valve hindware or equivalent approved quality conforming to IS standards |
193 | 15mm nominal bore |
194 | Providing and fixing Table top wash basin [Cera Calburt or equivalent ] of size 550 mm x 400 mm Snow White Table Top Basin with 15 mm C.P. brass pillar taps[ equivalant to cat no 9302 (Prayag make) ,Cera F1015101 Steel Pillar Cock, Silver, Steel Finish or equivalent], 32 mm C.P. brass waste of as per approved make of selection including fittings and waste pipe etc. and fixing on wash basin counter by tile adhesive of approved make. |
195 | Credit for dismantled material received from site of work which will be handed over to contractor as per direction of Engineer-in-charge. Dismantled G.I. Pipe,C.I. pipe, M.S.Etc |
196 | Credit for dismantled material received from site of work which will be handed over to contractor as per direction of Engineer-in-charge.Dismantled old Wood |
197 | Credit for dismantled material received from site of work which will be handed over to contractor as per direction of Engineer-in-charge.Dismantled old PVC |
198 | Elect |
199 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
200 | Group A |
201 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. |
202 | 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
203 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
204 | 4 X 4 sq. mm + 2 X 4 sq. mm earth wire |
205 | Supplying and drawing following size of FRLS PVC insulated copper conductor single core cable in the existing surface/ recessed steel/ PVC conduit as required |
206 | 3 x 1.5 sq. mm |
207 | 6 x 1.5 sq. mm |
208 | 3 x 4 sq. mm |
209 | 6 x 4 sq. mm |
210 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
211 | 20 mm |
212 | 25 mm |
213 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
214 | 5/6 A switch |
215 | 15/16 A switch |
216 | 3 pin 5/6 A socket outlet |
217 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
218 | Supplying and fixing Plug top following rating including connection etc. as required. ISI markedMake: Havells/Anchor /L&T/SSK/ MK |
219 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. |
220 | 1 or 2 Module (75mmX75mm) |
221 | 6 Module (200 mm X 150 mm) |
222 | Supplying & fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required. |
223 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. |
224 | Supplying and installation of 300 mm sweep, 1400 RPM heavy-duty, 240 V, single phase, metallic exhaust fan Conforming to IS:2312 -1967in the existing opening, including making the hole to suit the size of the above fan and making good the damage, connection, testing, commissioning etc. as required.(HavellsTurbo force Heavy Duty Exhaust Fan or with similar specifications Crompton / Orient / Usha / Almonard) |
225 | Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. complete as per direction of Engineer-in-charge. |
226 | Supply, installation, testing and commissioning of 15 to 18 W surface mountedLED downlighter luminaire in metallic housing, with a minimum system luminous efficacy of 100 lm/W, Average LED life L70B50: 50000 hours, complete with all accessories, diffuser and electronic driver, directly on the ceiling, including connections and earthing etc. suitable for 240 V, AC supply. as required. |
227 | Supply, installation, testing, and commissioning of integrated LED Batten luminaire, 600 mm (nominal size) with a minimum system lumen output of 1000 lumen and with a minimum system luminous efficacy of 100 lm/W, suitable for 230 V, AC, made of aluminium housing having a colour temperature5500K - 6500 K, Average life L70B50: 50000 hours,complete with all accessories, electronic driver, diffuser, directly on the ceiling/wall, including connections, earthing, etc. as required. |
228 | Supply, installation, testing, and commissioning of integrated LED Batten luminaire, 1200 mm (nominal size) with a minimum system lumen output of 2000 lumen and with a minimum system luminous efficacy of 100 lm/W, suitable for 230 V, AC, made of aluminium housing having a colour temperature5500K - 6500 K, Average life L70B50: 50000 hours, THD = 15%, complete with all accessories, electronic driver, diffuser, directly on the ceiling/wall, including connections, earthing, etc. as required. |
229 | Supplying, installation testing and commissioning of BEE5 star rating, following capacity water storage heater, withprotection against over heating, Multifunction Safety Valveandexternal adjustable thermostat, with16 A, 240 V, plug top with in-built 30 mA RCDand02 nosflexible connection pipe suitable for working with 230V AC, 50 Hz, 1 Phase supply etc as required. (Make:Havells / Crompton/ AO Smith /Racold /Jaguar with 7 year warranty on inner tank, 3 year warranty on heating element, 2 year comprehensive Warranty) |
230 | 35Litres capacity electrical storage water heater. |
231 | Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. |
232 | Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling etc as required. |
233 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. |
234 | Providing and fixing 3 mm thick PVC / phenolic laminatedround sheet cover on the existing junction boxwith two screws, etc., as required. |
235 | Gross Amount by adding GST @ 18% in place of 12% (multiplication factor=1.0633) on DSR Items |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail