Bhakra Beas Management Board-BBMB has published Tender For Renovation The Building Of Fire Station Bbmb Talwara Township. Submission Date for this Tender is 10-03-2023. Building Work Tenders in talwara Punjab. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Stripping and stacking iron sheets of a roof including ridging, flashing, eaves boards gutters and and down pipes. CSR Item No. 8.11 |
| 2 | Corrugated GI Sheet roofing 0.80mm thick fixed with galvanized iron J or L hooks 10mm dia, GI Limpot and bitumen washers complete excluding the cost of purling rafters and trusses.CSR Item No. 13.18 |
| 3 | GI Sheet gutters 0.80mm thick semicircluar 15cm diametre including fixing with clamps and making connections with rain water pipes. CSR Item No.13.22 |
| 4 | Dismantling wood work from roof. CSR Item No. 8.9 |
| 5 | Providing and fixing ceiling consisting of 12.5mm thick Gypsum Board of any size G.I. Cradling hanged from the ceiling by means of GI hanger complete as per drawing, specifications and to the entire satisfaction of engineer-in-charge. CSR Item No. 13.65 |
| 6 | Nicking cement concrete surface (over 28 days old including preparation and laying slurry) CSR Item No. 10.31 |
| 7 | Providing and laying vitrified floor tiles 600x600mm size premium quality ,manufactured usingDouble ChargeTechnology, with water absorption less than 0.08% and conforming to IS: 15622 of approved makein all colours and shades, laid on existing flooring with cement based high polymer modified quick set tile adhesive (water based) of approved make IS 15477 marked using 5 Kg adhesive per sqm of tile area in average 3mm thickness over existing base etc complete CSR Item No. 14.113 (a) |
| 8 | 20mm thick white terrazzo skirting or dado, rubbed and polished granolithic finish under layer 8mm thick cement sand plaster 1:3 and top layer 12mm thick with 7mm to 10mm gauge white marble makrana chipping laid in 3:16(37.50kg of white cement, 12.5 kg marble powder and 0.05 cum of whit marble chippings) including rounding of junctions. CSR Item No. 14.46 |
| 9 | Providing and laying Anti skid ceramic floor tiles of size 300x300mm x10mm thick of 1st quality conforming to IS: 15622 of approved make in colours such as white , ivory , Grey , Fume red brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @3.3kg/sqm including pointing the joints with white cement and matching pigment etc. complete white cement slurry in joints including corners angles and beading. CSR Item No. 14.72 |
| 10 | Providing & fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/ Highly Gloss finish/ Highlighter/emboss conforming to ISI 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 250x300mm & 300x300mm as approved by Engineer-in-charge in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:4 (1 cement:4 fine sand)and jointing with grey cement slurry @3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.CSR Item No. 14.126 |
| 11 | Removing Doors and windows (steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. (a) Doors of area 3 sqm and below.CSR Item No. 8.26 (a) |
| 12 | Removing Doors and windows (steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. (b) Window of area 3 sqm and below. CSR Item No. 8.26 b) |
| 13 | Supply& Fixing of pressed steelframes (Chowkats) consisting of 18 gauge (1.25mm)thick steel sheet of the specified section (standard design latest) including iron lugs(hold fasts)ironhinges, confirming to P.W.D specifications including bolts for fixing stops lock-notch provision for receiving tower bolts, Hydraulic spring and finished with one priming coat of approved quality , fixed in position ,including the cost of cement concrete 1:3:16 for filling in the frame and cement concrete 1:2:4 for lugs complete. (d) Doors and windows frame of size 161mmx60mm with 40mm wide double rebate weighing 4.05kg per meter.CSR Item No. 18.24 (d) |
| 14 | Supplying openable steel windows of standards rolled steel Z sections , joints mitred and electrically flash welded with iron fittings, including necessary iron handles ,peg stay, catchers bolts , iron lugs and pressed steel projected hings and glazing clips complete (excluding glazing) and finished with two coats of ready mixed paint ,red lead non-settingprimer.(b) Aboveone sqmArea.CSR Item No. 18.20 (b) |
| 15 | Wire Gauge fixed on steel windowsof standard rolled steel section , with 3mm thick flat iron cover moulding of 12.5mm width , fixed with machine screws , complete in all respects. CSR Item No. 18.27 |
| 16 | Factory manufactured solid flush door fixed in position iron hings , etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position.(code ISI-2202-1(1999)(b) Decorative with elm or gurjan facing on one side and teak facing on the other side edge lipped with teak with laminated core.(4) 35mm thick CSR Item No. 17.27 *b (iv) |
| 17 | Providing and Fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete:300mmx16mm CSR Item No. 17.49 (a) |
| 18 | Supplying and fixing glass panes with glazing clips and special metalsach putty of approved make.(b) Glass Panes 4mm or 10.75kg/sqm exceeding0.40 sqm of area. CSR Item No. 18.25(b) |
| 19 | Extra for Providing & Fixing steel beading of approved shape steel tube beading size 12mmx12mm, 18gauge of approved shape and section with screw for fixing of glass panes instead of glazing clips and metal slash putty in steel doors, windows &ventilators complete in all respect. CSR Item No. 18.26 |
| 20 | Wire Gauge deodar wood door shutter without springs housed in chowkats (Single Leaf)(a)35mm thick. CSR Item No. 17.11 (i) |
| 21 | Wrought iron and mild steel ladders, framed grills , grating etc. with ends of bars, riveted or welded or forged, framed window guards , barred iron doors , stair case , iron railing including cost of bolts and nuts or screws or welding rod , complete fixed in position. CSR Item No. 18.4 |
| 22 | Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete. (c) ISI Designation No. III (size of door 851mm to 1000mm) CSR Item No. 17.43© |
| 23 | Applying priming coat with metal primer on new steel or iron work including preparation of surface. CSR Item No. 16.20 |
| 24 | Painting two or more coats with aluminum paint to give an even shade excluding priming coat. CSR Item No. 16.25 |
| 25 | Providing and fixing in position chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr PVC flushing cistern ISI marked, PVC short bend 32mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge. CSR Item No. 30.4 |
| 26 | Providing and fixing in position vitreous chinaware white Indian make large flat back or angular lipped front urinal 375x390xx590mm of approved make(to the approval of the Engineer-in-charge) consisting of C.P brass Urinal waste coupling dome type 32mm outer length 75mm , CP brass Urinal Spreader Ocular-Regular and CP brass tube connection 300mm long complete. CSR Item No. 30.16 |
| 27 | Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P brass waste 32mm dia with one CP brass pillar tap including rack bolt screw pair 115mm long complete in all respect.(ii) size 550x400x815mm. CSR Item No. 30.32(ii) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
