Malabar Cements Limited has published Tender For Construction Of Civil Structures, Fabrication And Erection Of (Peb) Steel Structures For Raw Materials Storage Shed Including Both Civil And Structural Work At Walayar Plant. Submission Date for this Tender is 11-03-2023. Shed Construction Tenders in malabar Kerala. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Description of work |
2 | Earth work in rough excavation, banking excavated earth in layers not exceeding 20 cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, lead upto 50m and lift upto 1.5 m :All kinds of soil |
3 | Earth work in excavation in all kinds of soil by mechanical means Hydraulic excavator/ manual means in foundation trenches or drain ( not exceeding 1.5m in width or 10 Sq.m on plan)including dressing of sidesand ramming of bottom, lift up to 1.50 m, including getting out the excavated soil and disposal of surplus excavated soil as directed with in a lead of 50 m.All kinds of soil |
4 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth : consolidating each deposited layer by ramming and watering lead upto 50mm and lift upto 1.5m |
5 | Providing and laying in position cement concrete of specified grade(M20) excluding the cost of centering and shuttering, finishing and reinforcement - All work upto plinth level (Excluding the cost of cement) |
6 | Providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering - All work upto plinth level (PCC 1:4:8 -1cement : 4 coarse sand : 8 graded stone aggregate40 mm nominal size )(Excluding the cost of cement) |
7 | Providing and laying in position machine batched and machine mixed design mix M-30 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge -RCC up to Plinth Level. (Excluding the cost of cement) |
8 | Steel reinforcement (Approved brand by MCL)for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. With ThermoMechanically treated bars of grade Fe-500D or more |
9 | Providing and laying in position machine batched and machine mixed design mix M-30 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge-RCC above Plinth Level. (Excluding the cost of cement) |
10 | Steel reinforcement (Approved brand by MCL) for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. With ThermoMechanically treated bars of grade Fe-500D or more |
11 | Centering and shuttering including strutting, propping etc. and removal of form for foundations, footings, bases of columns, etc. for mass concrete |
12 | Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts |
13 | Centering and shuttering of Walls (any thickness) including attached pilasters, butteresses, |
14 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers |
15 | Painting(With Approved brand by MCL) of steel structures with synthetic enamel paint of approved brand and manufacture to give an even shade- Two or more coats on new surface. |
16 | Structural steel work (with Approved brand by MCL) riveted, bolted or welded in built up sections,trusses, PEB steel structure, purlins with cold formed light guage steel sections and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete, as per the appoved drawing of MCL. |
17 | DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Engineer at site. |
18 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm)with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
19 | Providing & fixing Poly carbonate corrugated sheet 0.8 mm thick as approved by the Engineer in charge and should be supplied in a single length of 12 M or as decide by the Engineer in charge. The sheets shall be fixed using self drilling / self tapping screw of size (5.5x55 mm) with EPDM seal complete upto any pitch in horizontal/ vertical/ curved surface, but excluding the cost of purlins, rafters, trusses, and including cutting to size shapes where ever required. |
20 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete: Ridges plain (500-600 mm) |
21 | Rock anchoring of foundation using 16mm dia bars. Mininum anchorage length 60cm from GL as per approved drawing by MCL |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail