Jaipur Vidyut Vitran Nigam Limited-JVVNL has published Repair And Maintenance Of Resi. And Non-Resi Jvvnl Bldg. Bayana Division (Balance Work). Submission Date for this Tender is 23-02-2023. Building Work Tenders in bayana Rajasthan. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | B-14/14.54: Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead |
| 2 | B-14/14.56.3:Dismantling of flooring with care including stacking of serviceable material and disposal ofunserviceable material within 50 meters leads: for cement concrete flooring |
| 3 | B-14/14.12.1: Dismantling door, windows and clearstory window (steel or wood) shutters including chowkhats, architrave and holdfast etc complete and stacking within 50 meters leads: of area 3 square meter and below |
| 4 | B-6/6.17.1 : Supplying and fixing stone lintels/bed plates for approved quarry rough dressed in cement mortar 1 : 4 up to 15 cm. thick |
| 5 | B-14/14.7.3: Dimolishing brick work including stacking of serviceable material and disposal of unserviceble material within 50 meter lead: in cement mortar |
| 6 | B-11/11.35.2: Polished blue kota stone flooring skirting, laid over 20 mm thick base of CM 1:4 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing : for area of each slab from 901 to 2000 sq. cm : 30 mm thick slab(i) |
| 7 | B-7/7.2.5: Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with pigment to match the shade of the granite slab complete including rubbing and polishing of : Good quality south black above 3601 cm2 slabs |
| 8 | B-7/7.12: Extra for providing edge moulding to 18 mm thick marble stone counters, ventities etc over item 7.1 & 7.2 including machine polishing to edge to give high gloss finish etc complete as per design approved by engineer in charge : granite work |
| 9 | B-7/7.12: Extra for providing opening of required size & shape for wash basin/kitchen sink in plateform, vanit counter and similar location in marble/stone work including necessary holes for pillar taps etc including rubbing and polishing of cut edge etc complete |
| 10 | B-7/7.3:- Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light blue and other light shades glazed tiles ISI market (IS: 13753) of size 200 mm × 300 mm in walls, floo0rs stepa, pillars etc. Laid on bad neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster on wall and piller);Category-A : Kajaria, Jhonson, Somani make. |
| 11 | B-7/7.6: Providing and fixing 1st quality MAT finished ceramic tile size 300×300 mm confirming to IS : 13753 colour such as white, grey, ivory,fume red brown, light green, light blue and other light shades in floors steps, pillars etc. Laid on a bed of neat cement slurry including nicely finished joints using water proof joint filler power (Unitile or Roffe make) and finishing with flush pointing in white cement mixe with pigment of match the shade of tile complete (including the cost of cement morter be 1:4) : Category - A : Kojaria Jhonson Somani make. |
| 12 | B-5/5.8.4.+5.9 : Half brick masonary in super structure using bricks of designation 100. Cement mortar 1 : 6 ( 1 cement : 6 Coarse sand)..Add extra over item no. 5.8 for half brick masonry in super structure upto third story including cost of nominal hoop reinforcement (2 nos,6 mm dia MS bar at every fourth course. |
| 13 | B-12/12.9.2&3 :- Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finisheda -20 mm thick |
| 14 | b - 12 mm thick |
| 15 | B-12/12.5: Applying Birla/ JK white cement based putty over cement plaster surface for making even surface |
| 16 | B-12/12.51.1 : Distempering with oil bound washable distemper of approved brand and maufacture to give an even shade including all scaffolding : (A) New work(one or more coats) over and including scrapping and priming coat with cement primer |
| 17 | (B) old work (one or more coats) including scrapping surface and necessary repairs: same Colour |
| 18 | B-12/12.53.1:-Finishing wall with water proofing cement paint or approved brand and manufacture and or required shade to give and even shade to give all scaffolding : (A) New work (Three or more coats). |
| 19 | (B) old work (one or more coats) |
| 20 | B-9/9.13 :- Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs 10 cm long embedded in cement concrete blocks 15x10x10 cm of 1:3:6 (1 cement : 3 caorse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and muts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. |
| 21 | B-8/ 8.18.2 (c) :- Providing and fixing external grade board solid core single leaf flush door shutters isi 2202-67 marked using phenol formal dehydresin in glue both side with approved steel fittingscomplete as per annexure -A, 30 mm thick commercial vernier both side |
| 22 | B-12/12.55.1 Applying priming coat: With redy mix pink or gray primer of approved brand and manufacture on wood work hard soft wood. |
| 23 | B-12/12.68.1 :- Painting with enamel paint of approved brand and manufacture to give and even shade : Two or more coats on new work. (A) Two or more coats on new work |
| 24 | (B) one or more coats on old work |
| 25 | B-9/ 9.26.2:- Providing and fixing M.S. sheet single leaf door shutter in angle iron frame 35x35x5 mm suitabilly diagonally braced with 25x3 mm flat iron above and below lock rail of size 50x5 mm beading extra including all fittings, as per direction of Engg. Incharge but excluding cost of chowkhats : including two coats of anit – corrosive red oxide primer paint. M.S. sheet 20 S.W.G. |
| 26 | B-9/ 9.26.2 +9.26.5 : Add extra for double leaf |
| 27 | B-9/9.28.3 : Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section joints mitred and welded with steel lugs 13x3 mm, 10 cm long embedded in cement concrete block 15x10x10 cm of 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4 mm thick with coper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary ginges of pivots steel handles peg stay etc. as required : Windows side hung (Openable). |
| 28 | S-2/2.7:- P&F bibcock (IS : 8931 Mark) superior quality of approved make :2.7.3: CP Brass bib cock 15 mm nominal bore |
| 29 | 2.7.4: CP Brass swan neck 15 mm nominal bore |
| 30 | S-2/2.12.1:- P&F inlet connection (Angle velves) superior quility of approved make for washbasin Gyset etc. CP intel connection 15 mm Brass (IS: 8931 marked) |
| 31 | S-1/1.39.3:- P&F WVC wash basin 1st quality (IS:2556 mark) of approved make with CI brackets duty painted one no. 15 mm CP piller cock (IS: 8934 mark) & 32 mm CP brass waste coupling of approved make 25 mm dia GI waste pipe complete including cutting and making good the wall. sioze 550×400 mm. |
| 32 | S-2/2.13.3:- P&F 15 mm dia connection pipe of approved quility/ make : PVC pipe with CP brass nuts up to langth 450 mm |
| 33 | S-2/2.15:- P&F Full way valve (IS: 778 mark) or wheel valve of approved make. (a) Gunmetal 15 mm nominal bore. |
| 34 | (b) Gunmetal 25 mm nominal bore |
| 35 | S-2/2.11.1:- P&F Ball cock (IS:1703 mark) with rod & PVC ball complete Brass wt. 400 gm 15 mm |
| 36 | S-1/1.48.1:- P & F Looking Mirrors with P.V.C. frame of approved (Atul, Modi Guard , Saint Gobin or equivalent) Size 500x400mm |
| 37 | S-1/1.50.1: P&F towel rail or ring of approved quality/make : CP brass towel rail elbow type with concealed screws size 450 mm (heavy duty) |
| 38 | S-3/3.40.1:- Construction of cement concrete chamber 125 mm dia on depressed floor up to 45 cm height from fllor with : C.P. Brass grating |
| 39 | S-3.23.3-Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 10 cm thick cc 1:5:10 in foundation ,20 mm thick inside plaster in C.M 1:6 ,finished with floating neat cement ,50 mm thick m 15 grade C.C Flooring ,earth work etc complete as per design including disposal of surplus earth with in a lead of 50.0 mtr.inside size 600X450 mm depth upto .5 m cement cover with frame. (A) S-3/3.23.1 : Inside size 300x300 mm depth upto 0.5 m cement cover with frame |
| 40 | (B) S-3/3.23.2 : Inside size 450x450 mm depth upto 0.5 m cement cover with frame |
| 41 | S-3/3.19.3:- P&F Rigid PVC pipe (IS:4985 mark) class II (4 KG./cm 2) appoved quality/ make incliding joint the pipe with solvent cement rubber ring and lubricant : 110 mm dia. |
| 42 | S-3/3.3.1: Providing and laying cement concrete 1:5:10 (1 cement: 5 sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per design. 100 mm diameter SW pipe |
| 43 | S-2.31--Providing and fixing Polyethylene - Aluminium -Polyethylene (PE-AL-PE) Composite Pressure Pipes as per 15450 : 2004 U.V. stablised with carbon black having thermal stabillity for hot and cold water supply with all compression type composite internal seal fittings (e.g. elbows, tees, reducers, couplers connectors etc.) including trenching & refilling the same etc.(External work). (B) S- 2.31.4-2532 (32mm OD) pipe(i) |
| 44 | S-2.30 -Providing and fixing Polyethylene - Aluminium -Polyethylene (PE-AL-PE) Composite Pressure Pipes as per 15450 : 2004 U.V. stablised with carbon black having thermal stabillity for hot and cold water supply with all compression type composite internal seal fittings (e.g. elbows, tees, reducers, couplers connectors etc.) including cutting chases on walls & making (Internal work). Concealed installation including cutting chases and making good the walls etc complete.(A) S-2.30.1.2-1620 (20mm OD) pipe |
| 45 | (B) S-2.30.1.4-- 2532 (32mm OD) pipe |
| 46 | S-3/3.20.-P & F rigid PVCpipe fittings (IS:4985 mark) of approved quality/make including jointing of pipe with solvent cement rubber ring and lubricant. 3.20.3-(a)Plain Tee -110 mm dia |
| 47 | 3.20.9-(b)Bend 87.5 -110 mm dia |
| 48 | 3.20.18-(d) Pipe Clip-110 mm dia |
| 49 | B-11/11.3.4: Cement concrete flooring grade 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) rounding off edge etc but excluding the cost of nosing of step etc complete: 75 mm thick with 20 mm thick nominal size aggregate |
| 50 | B-3/3.2.7:-Providing and laying in position cement concrete including curing. Compaction etc. Complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level:: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size.)(i) |
| 51 | B-9/9.62.1: Supplying and fixing of chain link fencing with angle iron posts 50x50x6mm plased at veery 3 mtr. Apart 30cm in ground embedded in cement concrete 1:3:6 (30x30x45cm) corner and every tenth post tobe strutted with (50x50x6cm) angle iron provided and fixed and fitted with posts including earth work in excavation etc. complete with chain link size 50mmx50mmx3.15mm |
| 52 | B-11/11.33: Providing & laying of chequered plain cement concrete embossed of specially manufactured non-slipping tiles of approved make 20 mm thick laid on 20mm thick bed of cement mortar 1:6 jointed with neat cement slurry complete |
| 53 | E301500-P & F 1200mm sweep BEE 5 star tared double ball bearing capacitor start, aluminium body & blade ceiling fan complying to IS 374:1979, I/P 50 watt at max speed & 230 volt, air delivery> 210 CMM, speed > 330 RPM with down rod upto 30 cm with 3x1.5 sqmm PVC insulated flexible copper conductor making connection testing etc. as required. gr-1 |
| 54 | E020100 :- Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. FR PVC insulated unsheathed flexible copper conductor 1.1 KV grade and 1.5 sq. Mm FR PVC insulated unsheathed flexible copper earth conductor 1.1 KV grade (IS : 694) of approved make in surface/ recessed ISI marked medium duty PVC conduit & it’s accessories, round tiles, 18 SWG MS box with earth terminal, screwless cage connectors for netural looping in switch. 3.0 mm thick phenolic laminated sheet, zinc plated/ brass screws, cup washers, making connections, testing etc, as required (Group 2) (a) E020101 : Short point (up to 3 Mtr.) |
| 55 | (b) E020102 : Medium point (up to 6 Mtr.) |
| 56 | E040500 :- Supplying and fixing of power plug point accessories on 18 SWG metal box of size 175 X 100 X 60 mm on surface or in recessed with suitable size phenolic laminated sheet cover including cost of 6 pin 16 amp. Switch and socket outlet, making connection, testing etc. as required (Group 2). |
| 57 | E020301 :- Wiring of 3 pin 5 amp. Light plug point with 1.5 sq. Mm FR PVC insulated unsheathed flexible copper conductor 1.1 kv grade and 1.5 sq mm FR PVC insulated unsheathed flexible copper earth conductor 1.1 kv grade (IS : 694) of approved make in surface/ recessed ISI marked medium duty PVC conduit & it’s accessories, round tiles , 18 SWG MS box with earth terminal, screwless cage connectors for netural looping in switch board & falce ceiling point, 6 A switch 6 A scoket. 3.0 mm thick phenolic laminated sheet, zinc plated/ brass screws, cup washers, making connections, testing etc, as required on board. (Group 2) |
| 58 | E040100 :- Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS : 694) of 11 kv grade and approved make in existing surface or recessed conduit/ casing capping including making conne-ctions etc. as required (Group 2) (a) E040108 : 2 X 2.5 sq.mm + 1.5sq. mm |
| 59 | (b) E040117 : 2 X 4.0 sq. mm +2.5sq. mm |
| 60 | E060112 :- P & F 240/415 V MCB with positive isolation of breaking capacity not less than 10 KA (B/C/D tripping characteristic) ISI marked IS 8828 (1996)/ conforming to IEC 60898 in existing board/ sheets including making connections with lugs, testing etc. as required single pole MCB : 6 A to 32 A rating (Group 1) |
| 61 | E301400: P&F of IP 20 LED tube light 20 watt with external batten made from CRCA sheet steel suitable to replace T-8/T-12 tube light, integral driver, 2000 luman +5% tolerance system lumen efficiacy of 100 Lm/watt minimum expected life time of 250000 burning hours, CCT 5700 K, ANSI, CRI 80, driver efiiciency >85%, life expectancy of driver min. 30000 hrs. PF 0.95 at Full load/230 Volt AC |
| 62 | E071400 : P & F IS : 371 marked 6 amp surface type ceiling rose including making connection testing etc. as required. (Group 2) |
| 63 | E 200101 : P & F IP-43 protected street light luminaire on existing bracket suitable for FTL. Made out from CRCA sheet steel finished with stove enamelled paint, having deep drawn aluminium alloy canopy reflector cum control gear tray, clear ribbed acrylic diffuser held with synthetic gasket, with all necessary accessories copper wound ballast, capacitor, starter, holder prewired with pvc insulated copper conductor including making connection testing etc. as required. (without tube) : 1 X 36 watt GR 2. |
| 64 | E203902- S&F of street light light braket made outfrom following size of b class GI pipe with heavy duty pole clamp saddles suitable fastners tc. As required 25mm dia. |
| 65 | B-9/9.4.1- Structural steel work Welded in built up sections, trusses and framed work, including cutting , hoisting , fixinn in position and applyng a priming coat of approved steel primer all complete above plinth upto 4.5 mtr height. In flats , tees, angles and channels. |
| 66 | B-10/10.50.3: P&F plain fibre glass sheet (FRP sheet fibre reinforcement product sheet confirming to IS 12866:1989 having minimum thickness as below including fixing with nuts, bolts, hooks and bitumen washer etc complete: 3.0 mm thick (wt. 5.0 kg/mtr. sqm) |
| 67 | (C)(ii): 8" long x 10 mm dia |
| 68 | (b)(i): Panel by shuttering Ply- 9mm thick (commercial) |
| 69 | (b)(ii): Panel by wire gauge 14 mesh x 24 gauge |
| 70 | (d)(ii): Stopper of aluminium with Double Rubber gutka |
| 71 | B-13/13.17.1: Renewing glass panes, with putty and nails wherever necessary: 4mm thick plain glass panes |
| 72 | B-1/1.34.1: Surface dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead up to 50 mtr and lift up to 1.5 mtr: All kind of soil |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
