|
| 1 | Cutting & Clearance of Jungle, bushes, shrubs Ankra/lpomoea, Jilic Hora, tyona etc. on canal and bunds in dry/moist/slushy condition Including disposals as per instruction of the Engineer-in-charge. Cost of wood has been deducted from rates and thus will be property of contractor after cutting-Ordinary |
| 2 | Earth work in excavation in foundation trenches or drains including dressing of sides, lift upto 1.5 mtr. Including talking out the excavated soil and ramming and disposal of surplus excavated soil as directed within a lead of 50 mtr. All types of soil-Depth upto1.5 m |
| 3 | Demolishing stone rubble masonry including stacking or serviceable material and dsposal of unserviceable material within 50 mtr. leads. In cement mortar. |
| 4 | Taking out doors, windows and clearstory windows shutters (steel or wood) including stacking within 50 meters lead:-Of area 3 square meter and below. |
| 5 | Demolish of flooring with care including stacking of serviceable material and disposal of unserviceable material within 50 Mtr. lead for :Cement concrete flooring. |
| 6 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. |
| 7 | M15 grade Nominal Mix 1: 2: 4 (1 cement : 2 coarse sand : 4 graded stoneaggregate 20mm nominal size). |
| 8 | M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stoneaggregate 20mm nominal size). |
| 9 | 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). |
| 10 | Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in: |
| 11 | Cement Mortar 1:6 ( 1-Cement : 6-Sand). |
| 12 | Random Rubble stone masonry with hard stone in superstructure aboveplinth level and upto Three Levelabove 30cm. thick walls in : |
| 13 | Cement Mortar 1:6 ( 1-Cement : 6-Sand). |
| 14 | Pointingonstonemasonryincementsandmortar 1:3 (1 cement : 3 sand) : |
| 15 | Flush / Ruled/ Struck or weathered pointing. |
| 16 | Brick work in partition in super structure upto Three storey 7cm. thick (brick on edges) using bricks of class designation 75 in : |
| 17 | Cement mortar 1 : 6 (1 cement : 6 coarse sand) |
| 18 | Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor Three level in all shapes and sizes in : Super Structure above plinta level upto 3 level I all shaped sizes |
| 19 | Cement mortar 1 : 6 (1 cement : 6 coarse sand) |
| 20 | Distempering with dry distemper of approved brand and manufacture shade on old work to give an even shade including all scaffolding and scrapping and necessary repairs complete. |
| 21 | Same colour |
| 22 | Finishing wall with water proofing cement paint of approved brand and manufacture and or required shadetogive an even shade including all scaffolding: |
| 23 | Old work (One or more coats). |
| 24 | Painting with synthetic enamel paint of approved brand and manufacture togive an even shade : |
| 25 | One or more coats on old work. |
| 26 | Varnishing with varnish of approved brand and manufacture : |
| 27 | One or more coats with copal varnish. |
| 28 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade : |
| 29 | One or more coats on old work. |
| 30 | French sprit polishing : |
| 31 | One or more coats on old work. |
| 32 | Repair to stone masonary in cement sand mortar 1:6 with old and new stone. |
| 33 | Dismantling brick tiles covering in terracing including stacking of serviceable MATERIAL and disposal of unserviceable MATERIAL within 50 meters lead. |
| 34 | Painting (one or more coats) on rain water soil, waste and vent pipes and fitting with black anticorrosive bitumastic paint of approved brand and manufacture on old work : |
| 35 | 50 mm dia. Pipes. |
| 36 | 75 mm dia. Pipes. |
| 37 | 100 mm dia. Pipes. |
| 38 | 150 mm dia. Pipes. |
| 39 | Painting with Aluminium paint of approved brand and manufacture to give an even shade : |
| 40 | One or more coats on old work. |
| 41 | Colour washing of all shades to give an even shade including all scaffolding : |
| 42 | Old work (one or more coats) with whiting with a base coat of white washing including scrapping old surface. |
| 43 | Providing and laying two coats of black rubberised water proof coating after cleaning the existing surface with wire brush, surface should be free from dust, loose particle, oil and grease etc. Apply 1st coat over surface or RCC / Stone slab / Lime terrace / and MS Tanks etc. and apply 2nd coat after drying completely 1st coat (drying period 8 hours) complete in all respects (as per manufacturer\"s specification) with white rubberised water proofing. |
| 44 | Repair to cement plaster in cement mortar 1 : 6 (1 cement : 6 fine sand) including removal of old plaster in regular shape and white or colour washing. |
| 45 | Crack filling in masaladar lime cement with water proofing compound including, jhiri. |
| 46 | Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide |
| 47 | Providing and fixing fully paneled double leaf shutter for doors as per approved design and drawing with approved ordinary C.P./oxidized steel fittings as per Annexure – A’ and width of styles & top rails of 100mm and lock rails width of 150mm and bottom rails of 200mm width including teak wood beading of size 19mmx12mm on both faces complete : |
| 48 | Sheesham wood grade - I |
| 49 | Wire gauge 24gauge 14 mesh of IS designation 85 gauge wires of dia 0.56 mm panels |
| 50 | 35 mm thick |
| 51 | Wire gauge 24gauge 14 mesh of IS designation 85 gauge wires of dia 0.56 mm panels- 35 mm thick |
| 52 | Providing and fixing flush door shutters non decorative type (hollow core construction) with internal frame of 1st grade wood having styles and top rails of 100 mm width & bottom and lock rails of 150 mm width with 3 Nos. cross battens of 50 mm thick width using 4 mm thick commercial ply on both faces of shutters & 6 mm thick beading of respective wood using with approved steel fitting as per Annexure \"A\" : - |
| 53 | Sheeshamwood grade-I |
| 54 | 35 mm thick |
| 55 | Providing and fixing Anodised Aluminium Curtain rod with Aluminium brackets complete : |
| 56 | 25 mm dia |
| 57 | Providing and fixing glazing in aluminium door, window ,ventilator shutters and partitions etc. with PVS / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(Cost of aluminium snap beading shall be paid in basicitem.) |
| 58 | With glass panes of 5.0 mm thickness (weight not less than 13.75 kg./sqm) as per IS : 2835. |
| 59 | With tinted glass panes of 5.0 mm thickness (weight not less than 13.75 kg./sqm). |
| 60 | Patch repair to cement concrete floor including digging out old floor in regular shape and removal of rubbish curing etc. complete in all respects. |
| 61 | Providing and fixing expanded grill made of aluminum as per design and drawing having members section of size 7.5mm x 6.0mm and opening of size 102mm x 99mm to aluminum window/vent with required screws, Y and H aluminium sec (as per drawing) at the ends and middle joints respectively complete in all respect as per direction of engineer in charge. - Anodised aluminum (anodised transparent 81 dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC 15, Anodizing to be got done from approved Anodizer) |
| 62 | Providing and applying white cement based puttyover plastered surface to prepare the surface even and smooth complete |
| 63 | Providing and fixing sun control film, thickness of film 1 Mil Visible Light Transmittance 4-24% & Solar Energy Transmittance 42-51% & Total solar Energy rejection 37-43%of approved colour and shade , complete in all respect , at all level , as directed by engineer- in -charge. |
| 64 | Renewing glass panes, with putty and nails wherever necessary: |
| 65 | Float glass panes of thickness 4 mm |
| 66 | Hydraulic Excavator(3D) with driver and fuel. |
| 67 | Tractor with trolley . |
| 68 | Supply of different sized pots at site store including loading unloading & transportation etc. complete. |
| 69 | Cement pot 300 mm size |
| 70 | Cement pot 350 mm size |
| 71 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece M.S. |
| 72 | With stainless steel cover plate |
| 73 | Providing and Fixing superior quality like Hardvyn or equivalent hydraulic door closure. |
| 74 | Chowkidar, Beldar, Helper |
| 75 | Painter |
| 76 | White Washer, Skilled Beldar |
| 77 | Carpenter (Av.), Mason (Av.), Sweeper |
| 78 | Grading roof for water proofing treatment with water proffing compound-Cement Concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 79 | Providing and fixing 12 mm thick pelmets with 20 mm dia C.P. steel curtain rod and brackers 100x25x3 mm M.S. flat etc. complete- particle or fibre board (Phenol Bonded)150 mm wide |
