Housing And Urban Development Corporation Limited-HUDCO has published Tender For Repair / Renovation Of Buildings At Different Locations Of Jda Division No.Ii Jammu (Stage Tender). Submission Date for this Tender is 24-02-2023. Building Work Tenders in jammu Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead With cement mortar 1:4 (1 cement : 4coarse sand) |
| 2 | Renewing glass panes, with putty and nails wherever necessary includingraking out old putty : Float glass panes of thickness 4.0 mm(weight not less than10kg/sqm) |
| 3 | Renewing glass panes, with wooden fillets wherever necessary : Float glass panes of thickness 4.0 mm (weight not less than10kg/sqm |
| 4 | Renewal of old putty of glass panes (length) |
| 5 | Re-fixing old glass panes with putty and nails |
| 6 | Flush pointing with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement for flat tile bricks on top of mud phaska : With non modular brick tiles |
| 7 | Renewing bottom rail and / or top runner of collapsible gate includingmaking good all damages and applying priming coat of zinc chromate yellow primer of approved brand and manufacturer: |
| 8 | Providing & fixing White vitreous china water closet squatting pan(Indian type) along with “S” or “P” trap including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Orissa pattern W.C Pan of size 580x440 mm |
| 9 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge. |
| 10 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. |
| 11 | Demolishing cement concrete manually/by mechanical means includingdisposal of material within 50 meters lead as per direction of Engineer-in charge:1:3:6 or richer mix (i/c equivalent design mix) |
| 12 | Demolishing cement concrete manually/by mechanical means includingdisposal of material within 50 meters lead as per direction of Engineer-in charge: 1:4:8 or leaner mix (i/c equivalent design mix) |
| 13 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In Cement Mortar |
| 14 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 meters lead. |
| 15 | Providing and fixing white vitreous china pedestal type water closet (European type W.C.pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures, complete including cutting and making good the walls and floors wherever requied:W.C. pan with lSI marked white solid plasticseat and lid. |
| 16 | Providing and fixing white vitreous china pedestal type water closet ( European type) with seat and lid , 10 litre low level white vitreous china flushing cistern and CP flush with fittings amd C. I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required: W.C Pan with ISI marked white solid plastic seat and lid. |
| 17 | Providing and fixing wash basin with C. I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: (A) White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps |
| 18 | Providing and fixing wash basin with C. I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: (A) White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar taps |
| 19 | Providing and fixing white vitreous china water closet squatting pan (Indian type) Orissa pattern W.C. pan of size 580x440 mm |
| 20 | Providing and fixing white vitreous china pedestal type (European type/wash down type) water closet pan |
| 21 | Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete: 10 ltr. Capacity - white |
| 22 | Providing and fixing solid plastic seat with lid for pedestal type W.C pan complete: White solid plastic seat with lid |
| 23 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x41 Ox265mm sizes respectively. |
| 24 | Providing and fixing P.V.C waste pipe for sink or wash basin including P.V.C waste fittings complete: Flexible pipe 32mm dia |
| 25 | Providing and fixing P.V.C waste pipe for sink or wash basin including P.V.C waste fittings complete: Flexible pipe 40mm dia |
| 26 | Providing and fiixng 100 mm sand cast iron grating for fully trap |
| 27 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 28 | Providing and fixing mirror of superior glass( of approved quality) and of required shape and size with plastic . moulded frame of approved make and shade with 6 mm thick hard board backing Oval shape 450x350mm (outer dimensions) |
| 29 | Providing and fixing G.I pipes complete with G.I fittings and clamps, including cutting and making good the walls etc. Internal work exposed on wall 15mm dia (Complete Job) |
| 30 | Providing and fixing G.I pipes complete with G.I fittings and clamps, including cutting and making good the walls etc. Internal work exposed on wall 20mm dia (Complete Job) |
| 31 | Providing and fixing G.I pipes complete with G.I fittings excluding trenching and refilling etc .(External work medium) 15mm dia nominal bore (Complete Job) |
| 32 | Providing and fixing G.I pipes complete with G.I fittings excluding trenching and refilling etc .(External work medium) 20mm dia nominal bore (Complete Job) |
| 33 | Providing and fixing of brass bib cock of approved quality 15mm dia nominal boare (Complete Job) |
| 34 | Providing and fixing of brass bib cock of approved quality 20mm dia nominal boare (Complete Job) |
| 35 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 15mm dia nominal bore (Complete Job) |
| 36 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 20mm dia nominal bore (Complete Job) |
| 37 | Providing and fixing uplasticized PVC connection pipe with brass unions: 30 cm length 15mm nominal bore |
| 38 | Providing and fixing unplasticized PVC connection pipe with brass unions: 30 cm length 20mm nominal bore |
| 39 | Providing and fixing unplasticized PVC connection pipe with brass unions: 45 cm length 15mm nominal bore |
| 40 | Providing and fixing unplasticized PVC connection pipe with brass unions: 45 cm length 20mm nominal bore |
| 41 | Providing and fixing G.I Union in G.I pipe including cutting and threading the pipe and making long screws etc. complete (New work) 15mm nominal bore |
| 42 | Providing and fixing G.I Union in G.I pipe including cutting and threading the pipe and making long screws etc. complete (New work) 20mm nominal bore |
| 43 | Providing and fixing G.I Union in existing G.I pipe line cutting and threading the pipe and making longscrews including excavation, refilling the earth or cuting of wall and making good the same complete wherever required. 15mm nominal bore. |
| 44 | Providing and fixing G.I Union in existing G.I pipe line cutting and threading the pipe and making longscrews including excavation, refilling the earth or cuting of wall and making good the same complete wherever required. 20mm nominal bore. |
| 45 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fitting and the base support for tank. |
| 46 | Providing and fixing 15mm nominal bore C.P. brass bib cock of approved quality conforming to IS:8931 |
| 47 | Providing and fixing 15mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. |
| 48 | Providing and fixing 15mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS 8931 |
| 49 | Providing and fixing 15mm nominal bore C.P. stop cock (concealed) of standard design and of approved make conforming to IS 8931 |
| 50 | Providing and fixing unplasticized P.V.C connection pipe with PTMT nuts, collars and bush of approved quality and colour: 15mm nominal bore with 30cm length |
| 51 | Providing and fixing unplasticized P.V.C connection pipe with PTMT nuts, collars and bush of approved quality and colour: 15mm nominal bore with 45cm length |
| 52 | Providing and fixing PVC rain water pipe 110 mm dia |
| 53 | Providing and fixing PVC pipe in sanitary works, like connecting to man hole, septic tank to drain (Complete Job): 110mm dia |
| 54 | Providing and fixing PVC pipe in sanitary works, like connecting to man hole, septic tank to drain (Complete Job): 75mm dia |
| 55 | Providing and fixing PVC accessories: Plain bends 110mm dia |
| 56 | Providing and fixing PVC accessories: Door bends 110mm dia |
| 57 | Providing and fixing PVC accessories: Plain Tee 110mm dia |
| 58 | Providing and fixing PVC accessories: Door Tee 110mm dia |
| 59 | Labour engaged for cleaning the tops of roofs including removal of scrap (u/s) within 4 kms M/T |
| 60 | Labour engaged for cutting of plants from the walls/on roofs of buildings. |
| 61 | Labour engaged for shifting of s/s material from JDA building to department store Janipur by departmental vehicle |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
