|
| 1 | Earth Filling |
| 2 | Supplying and Filling in plinth with river sand under floors including watering ramming consolidating and dressing complete including cost of sand |
| 3 | Anti-termite treatment of existing floor and wall using Imidacloprid 30.5% EC non repellent, odorless, low dose, environimentally safe Termiticide with rapid action noncorrosive stain free, by injecting the emulsion as per specification and plugging with cement mortar 1:2 ( 1 cement : 2 coarse sand) in the whole floor area. The pesticide emulsion of imidacloprid 30.5% EC mixed with water in the ration of 1:474 will be pumped by a motorized spray pump specified manner. The net floor and wall area treated will be measured for payment.(Quantity tentative) |
| 4 | PCC |
| 5 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. |
| 6 | M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stoneaggregate 20mm nominal size). |
| 7 | FORM WORK |
| 8 | Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc. |
| 9 | RCC |
| 10 | Providing and laying in position Ready mix concrete manufactured in fullyautomatic Batching Plant andtransported to site intransit mixer for having continous agitated mixer, manufactured as per approved mix design of specified grade of RCC work including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering and reinforcement with all lead and lift including cost of admixtures in recommended proportion as per IS 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer in charge .All works upto floor V floorM20 grade Design Mix by using min 400 Kg of cement per cum of concrete |
| 11 | Add extra for providing richer mixes respectively at all floor levels(a) Providing M-25 grade concrete by using min 410 kg of cement per cum instead ofM-20 grade design mix. |
| 12 | REINFORCEMENT WORK |
| 13 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. Fe 500 D (Cocfirming to relevelent IS code ) |
| 14 | BRICK WORK |
| 15 | Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in :Cement mortar 1 : 6 (1 cement : 6 coarse sand) |
| 16 | PLASTER WORK |
| 17 | Plaster on new surface on walls in cement sand mortar 1:4including racking of joint etc. complete fine finish :20mm thick |
| 18 | Repairs to plaster of thickness 12mm to 20mm in patches ofarea 2.5 sq. metres and under including cutting the patch inproper shape, raking out joints and preparing and plasteringthe surface of the walls complete including disposal of rubbishto the dumping ground within 50 m lead With cement mortar1 :4 ( 1 cement : 4 coarse sand)(Quantity tentative) |
| 19 | FINISHES |
| 20 | FLOORING |
| 21 | Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4) |
| 22 | P & F 1st qualityVitrified Porcelain Polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc complete.size 600 mm X 600 mm |
| 23 | Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades ceramic glazed vitrified tiles with water absortion less than or equal to 0.08% confirming to IS:13753 & IS : 15622 in floors, steps etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar).Size 800mm x 1200mm |
| 24 | Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete.South Zed BlackAbove 3601 Cm2 Slabs |
| 25 | WALL FINISHES |
| 26 | POPProviding and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete |
| 27 | INTERNAL PAINTWall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding:Two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect |
| 28 | DOOR |
| 29 | Providing and fixing fully panelled/partly panelled/double leaf shutter frame for doors as per approved design and drawings with approved ordinary C.P./oxidised steel fittings as per Annexure - \"A\" and width of styles & top rails of 100mm and lock rails width of 150mm and bottom rails of 200mm width including teak wood beading of size 19mm x 12mm on both facesShesham wood grade I |
| 30 | Providing and fixing wood panelling or panelling and glazingin panelled or panelled and glazed shutters for doors, windowsand clerestory windows (Area of opening for panel insertsexcluding portion inside grooves or rebates to be measured).Panelling for panelled and glazed shutter 25 mm to 40 mmthickShesham wood grade I |
| 31 | Dismantaling |
| 32 | Renewing glass panes, with putty and nails wherever necessaryFloat glass panes of thickness 5 mm (Quantity tentative) |
| 33 | Dismantling wooden boards in lining of walls and partition excluding supporting members but including stacking within 50 meter leadThickness above 10mm up to 25mm |
| 34 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
| 35 | Dismantling tile work in floors and roofs laid in cement mortar including stacking of serviceable material |
| 36 | Dismantling roofing including ridges, hips, valleys and rafters etc. and stacking the within 50 meter lead of: |
| 37 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
| 38 | Dismantling doors, windows and clearstory windows steel or wood shutter including chowkhats and holdfasts etc. complete and stacking within 50 meters lead: |
| 39 | Providing and fixing POP false ceiling using 12 to 18mm thick POP cast in situ using GI frame work to be made of parimeter angle of size 25 x 25 x 0.556mm as a member provided at 300mm center to center and intermidiate channel of 45 x 15 x 0.80 mmas main runner @ 900mm center to center suspended by means of GI angle25 x 25 x 0.556mm from the existingRCCceiling by MS Rawl plug 12.50mm dia x 35mm with 6mm diabolt screwed at 900mm c/c GI wire mesh 10 x 10mm x 24 gauge screwed on the GI frame work as per approved design and drawingAdd extra over item of false ceiling for decorative false ceiling in steps as per requriments |
