Tender For Repair Of Emergency Gate At Tbwcs Of Tattihalla Dam, Tattihalla-Karnataka

Lifting Beam Rectification: Shaft Alignment Replacement Of 12Mm Pin Plate, Removing And Welding Of 2Nos New Pulley Shaft Support Plate. Lifting Beam Pulley Servicing And Making Free Rotation-1Nos. Rectification Of Roller: Roller Washer Plate Cutting -2 Sides And Fixing Of Total 16 Nos Of Roller Washer Dia 200Mm 8Mm Thick. -16Nos. Removing Of Rollers, Roller Cover Plate 2 Side Drilling And Tapping Of 12 Nos Of Counter Sunk Bolt For One Roller -8 Nos. Supply And Fixing Of Suitable M10 Counter Sunk Bolt For Roller Cover Plate.-96Nos. Roller & Pin Cleaning For Lubrication, Bearing Removing And Fixing Of New Bearing Of Size Id=100Mm, Od=180Mm Width=60Mm(Approximately)- 8Nos. Supply New Bearing Id=100Mm Od=180Mm Width 60Mm (The Size Of Bearing Mentioned Nearest Size The Exact Size Has To Be Considered After Dismantling Of Roller)-8 Nos. Removing Of Rubber Seal Bolt Cutting & Removing Of Seal Seal Clamp Fabrication-Side Top & Bottom - M12x80-160Nos. - Ls. Supply & Fixing Of New Two Side Rubber Seal 45Bulb 14Mm Thick And Total Length 6.6 Mtr, (Including All Materials And Consumable)-6.6 Mtr. Supply & Fixing Of New Corner Rubber Seal 300X300mm 45Bulb And 14Mm Thick Left And Right Side (Including All Materials And Consumable)-2Nos. Supply & Fixing Of New Bottom Flat Seal 100Mm Width 20Mm Thick. -3.4 Mtr. Supply And Fixing Of New M12x80 Bolt And Nut With Double Washer-160Nos And Tightening. Supply And Fixing Of 4 Nos Guide Shoes Along With 4 Heavy Duty Springs And 4 M16x100mm Bolt With 16 Nut With Washer For Each Guide Shoe Assembly. Total Bolts=16 Nos And 64 Nuts With Washer. Supply Of Ci Counter Weight Blocks Of Size 300X100x50mm.).-2000Kg. Removing Of Entire Counter Weight Blocks And Balancing Of Counter Weight The Weights Should Be Equally Distributed All Along The Gate And Locking. Attending Structural Repairs At Gate Joint Plate, Counter Weight Lock Plate, Gate Stiffeners And End Girder Including Gas Cutting, Welding Etc., (Including All Materials And Consumable)-2000Kg. Gate Touch Paint, Rubber Seal Clamp Plate With Coal Tar Epoxy Paint With Two Coat. Consumable, Tools And Tackles Required And Other Equipment Required Carrying Out Work In Safe Manner.A)Electricity Required To Execute The Work At Site Will Be Provided By Kpcl If Available. It Is Observed Frequent Interruption Of Kptcl Power Supply Because Of Difficult Area Which Has To Be Considered Before Quoting.B)Provision Of Safety Apparatus And Equipment. C)Accommodation Will Be Provided On Chargeable Basis In Ambikanagar Colony Depends On Availability. D)Transportation: All The Transportation Of Men And Material Is Included. Repair Of Emergency Gate At Tbwcs Of Tattihalla Dam

INR 500 /-

INR 39530.0 /-

INR 15.81 Lakhs /-