Tender For Construction Of Building Infrastructure At Omc Colony, Rayagada In The District Of Rayagada., Rayagada-Odisha

TDR : 36117105

Tender Notice
Corrigendum Details
BOQ

Expired

Rayagada , Odisha

Tender Brief : Corrigendum : Tender For Construction Of Building Infrastructure At Omc Colony, Rayagada In The District Of Rayagada.

Document Fees
₹ 11800 /-

EMD
₹ 1047100.0 /-

Tender Value
₹ 10.47 Crore /-

Submission Date
01-03-2023

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Sr No	Corrigendum Date	Corrigendum	Type	New Submission Date
1	23-02-2023	CORRIGENDUM 2	Technical Bid	01-03-2023

Name of Work: Construction of building infrastructure at OMC Colony, Rayagada in the district of Rayagada.

Sl. No.	Item Description
1	OFFICE BUILDING
2	Supplying all labour, T&P, machinaries and materials for dimolition of existing store building of size 19.0 Mtr X7.00 Mtr including carefully removal of GCI sheets, M S Structures, Doors and windows and other usefull materials which could be reused further shall be stacked in propor position and removal of rest dabriges away from work site including cost of alllabours,T & P required for the work etc. Complete as directed by EIC.
3	Earth work in excavation by manual/mechanical means (Hydraulic excavator) in foundation trenches or drains, including dressing of sides and ramming of bottoms and dewatering wherever required, including all lifts, including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 5km including cost of all labours/ equipments , taxes, sundries and T&P etc all complete as per the direction of Engineer-in-charge.
4	Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering etc. including all lead and lift, cost of labour ,material, conveyance,royalties and taxes ,sundries ,T & P etc.complete as per the directions of Engineer-in-charge.
5	Supplying, diluting and preparing chemical emulsion like CHLORPYRIPHOS or other chemicals approved by Central Insecticides Board or as directed by the manufacturer and spraying the mixture uniformly by sprayer as pre-constructional anti termite treatment and creating a chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of walls and floors along with external perimeter of the building, expansion joints, surrounding the pipes and conduits etc. complete at the rate of 7.5 liters (or as directed by the manufacturer) per sqm on vertical and 5.0 liters per sqm on horizontal surfaces, 50% of the emulsion to be filled in the holes made in trenches at 150mm center to center etc.complete as per IS:6313 / 1981 (Part-II) and asper the direction of theEngineer-in-charge including cost of all materials, labour etc. complete.
6	Filling in foundation, trenches and plinth with river sand in layers not exceeding 20 cm in depth, well watered and compacted in layers with top surface dressed and leveled to proper gradient including cost of all materials, conveyance, all taxes and royalties, loading and unloading, including cost of all labour, all taxes, sundries ,T & P etc. complete as per directions of the Engineer -in-charge.
7	Providing & laying cement concrete of prop. (1:4:8) in foundation bed and floors using 40mm nominal size down graded, screened, washed hard black crusher broken granite metal of approved quality & from approved quarry including laying in the layers not exceeding 100 mm thick, hoisting, lowering, laying, watering and curing etc. complete to the required levels including cost, conveyance, royaltyof all materials, cost of all labour, T&P etc. as required for the work complete and as per direction of Engineer-in-charge.
8	Brick work with flyash bricks of size 25x12x8cm in cement mortar (1:6) with best quality bricks having crushing strength not less than 75 Kg/cm2 immersing the bricks in water for not less than 6 hours before use (the bricks shall be free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes molding, chamfering, corbelling .complete as per drawing, design and specification, watering and curing for 7days including cost, conveyance, royaltyof all materials, labour, T&P etc. and as per direction of Engineer in charge.
9	In foundation & Plinth
10	Ground floor
11	1st floor
12	Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying including the cost of centering, shuttering, finishing including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. including cost, conveyance, royaltiesof all materials and cost of all labour, T&P etc. as rrequired for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. Bar and binding wires and labour charges for bending, binding and tying the grills.
13	Foundation,Plinth
14	LintelGF
15	LintelFF
16	R.C.C Column & Beam GF
17	R.C.C Column & Beam FF
18	R.C.C Roof Slab GF
19	R.C.C Roof Slab FF
20	R.C.C Chajja GF
21	R.C.C Chajja FF
22	Supplying HYSD bars of approved quality size and grade and cutting, bending, binding and tying the grills in proper position as required for the RCC work in all floors, including cost, conveyance of HYSD bars Fe500 and above including binding wires of 18 to 20 gauge and cost of labour,T & P and other materials complete in all respact as directed by the EIC.. (Linear measurements will be taken & quantity will be calculated on standard weight. Weight of binding wire will not be considered for measurement.)
23	Ground floor
24	First floor
25	Dressed seasoned salwood work framed and fixed (wrought and put up) in frames of doors and windows ventilators with M.S hold fast with cost, carriage of all materials and cost of all labour and T&P required to complete as per specification and direction of EIC.
26	Ground Floor
27	First Floor
28	12mm (1/2\") thick cement plaster (1:6) for finished smooth surface of brick walls after racking out the joints including watering and curing etc. comp. with cost conveyance, royalty of all materials and cost of all labour, T&P scaffolding required for the work complete as per the direction of EIC.
29	Ground Floor
30	First Floor
31	Providing 16mm thick cement plaster to the surface of brick masonary wall with cement mortar (1:6) including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves and beads to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading and royalities, all labour, scaffolding, watering and curing, sundries and T&P etc all complete as per direction of the Engineer- in- charge.
32	Ground Floor
33	First Floor
34	Providing 6mm thick plaster in C.M. (1:4) over ceiling, chajja, loft, staircase, column, beams and walls after removing the false if necessary and close deep chipping including rounding of the corners, recess and roughening concrete surface where necessary, watering and curing, finished smooth over R.C.C. surface, including cost, conveyance, royalty, ,es of all materials, cost of all labour, T&P etc. complete as per direction of the Engineer-in-charge.
35	Ground Floor
36	First Floor
37	Supplying, fitting & fixing of Matt Finished premium series tiles in floors of size 1000mmx 1000mm/ 1200mmX600mm of approved make confirming to IS:13755 laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge .(Make- Somany / RAK/ Kajaria)
38	Ground Floor
39	First Floor
40	Supplying all materials, labour, T&P and fixing antiskid ceramic floor tile of 300mmx300mm size of approved brand and shade on 25mm thick cement mortar (1:1) (1 cement:1 sand)jointed with neat cement, slurry mixed with pigment to match the shed of tilescomplete as per specification and direction of EIC including cost, carriage of all materials cost of all labour, T&P required to complete the work.(Make- Somany / RAK/ Kajaria).
41	GroundFloor
42	First Floor
43	Providing and fixing 1st quality 300x600mm ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades of any size as approved by Engineer- in- charge, in skirting, risers of steps and dados, over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete (Tile should be of Somany / RAK / Kajaria).(Toilet)
44	Ground Floor
45	First Floor
46	Providing and fixing of35mm thickWPC Door Shutter(Solid) with teak edge leaping to the periphery of the shutter with pilishing as per detailed drawing with including, all hardwares & fixtures, SS tower bolt(150mm),Door stopper,SS aldrop(250mm),SS handle(200mm length),ss handle (150mm length) & SS Butt hinges -125mm x 65mm x2.12mm .including cost, conveyance, loading, T&P required for the work etc. complete in all respect as directed by the Engineer-in-charge
47	Ground Floor
48	First Floor
49	Providing and fixing of factory made uPVC Sliding window (White Colour) complete, comprising uPVC multi-chambered frame having in-built uPVC roller track on top and uPVC sash with wall thickness of 2.0mm (+-0.2 mm) duly reinforced with G.I. section 1.6 mm (+-0.2 mm), profile shall be manufactured from Tropicalized Blend with TiO2 and required additives. Profile must be colorfast and conform to standard EN12608. The profile sections should have multi hollow (min 2 to 3 chambers) chamber to include GI reinforcement with 120 GSM zinc coated, fitted in continuous length, in closed chamber. The thickness of GI should be selected to meet the wind load requirement as per IS 875- Part III on sash/mullion. Supplier should be submitting wind load calculation & validation complying with IS-875-III before material supply. Minimum steel reinforcement thickness of 1.2mm to 2.5mm. UPVC Windows & Doors must be fabricated with fusion welded corners & must conform to the strength requirements based on wind load as per IS 875-Part III. All hardware fitted should be Non-SS, except handles to be of zinc/Al. alloy casted with powder coated. Glass should be of 5mm single clear toughened Glass with weather seal (EPDM/TPE). After placing 5 mm Clear Toughned glass in the sash, uPVC glazing bead, interlock, EPDM gasket, brush shall be provided including touch lock( above 1500 mm Multi Lock ) and rollers & proper drainage system shall be provided. Window frame will be fixed to the wall with 100mm long and 8mm dia. Fasteners and after fixing frame the gap between frame & wall should be filled with silicon sealant (not more than 5 mm x 5 mm), complete in all respect as per direction of Engineer-In-Charge (Make: LG/ WINTECH/ TECHNAL/ BUILTIFY)
50	GF
51	FF
52	Supplying fitting fixing of 30 mm FRP shutter including cost of all materials, labour, all taxes, transportation, loading & unloading etc. complete as per specification and direction of Engineer -in-charge. (inside should made with 2nd class wood frame)
53	GF
54	1st floor
55	Supplying fitting fixing of 100mmx 75mm FRP door frame including cost of all materials, labour, all taxes, transportation, loading & unloading etc. complete as per specification and direction of Engineer -in-charge. (inside should made with 2nd class wood frame)
56	GF
57	1st floor
58	Providing, fitting & fixing M.S grill fabricated from MS Flat, Square bars / Round bars as per approved drawing and design including cost, conveyance & taxes of all materials, fabrication charges, fixing in position to RCC columns / walls in cement concrete (1:2:4) and making good to the damages complete as per direction of the Engineer- in- charge. The rates shall be inclusive of all cost of materials, labour, T&P shuttering etc complete as per direction of EIC.
59	Providing and painting internal surface two coats with plastic emulsion paint over a coat of water based primer of approved quality and approved shade in all floors at all height by making the surface of wallsmooth including cost, coveyance, loading and unloading and of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge. (Inside wall)
60	Ground Floor
61	First Floor
62	Weather coat two coats of approved brand and shade over a coat of water based primer of approved quality and approved shadeexterior surface of wall exposed to weather including cost of brush, scaffolding, staging charges with cost, conveyance of all materials, cost of all labour, T&P etc. complete as directed by EIC. (Weather coat should of ICI/Berger/Asian is to be used)
63	Ground Floor
64	First Floor
65	Providing & Applying priming coat with water bound wall Cement primer of approved brand and manufacture and of approved quality and shade on plastered surface of wall ncluding cost, coveyance, loading and unloadingof all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge.
66	GF
67	FF
68	Finishing wall surface with Acrylic wall putty (water based) of approved make and finished smooth & even surface to receive painting including cost of scaffolding etc. with cost of all materials, labour T&P etc complete as per direction of EIC
69	GF
70	FF
71	Providing waterproofing for Roof Top Surface :- Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of:(i) Ist course of applying cement slurry @ 4.4 kg/Sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.(ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface.(iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg.per Sqm of area.(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to Each other with bitumen @ 1.7 kg/Sqm) including cost, coveyance, loading and unloading and of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge.
72	2.5cm thick grading concrete (1:2:2) on roof slab with 6mm size hard granite chips of approved quality from approved quarry including hoisting and laying concrete,watering and curingincluding cost, conveyance, royalities of all materials, cost of all labour, T & P required for the work etc.required to complete as per direction of EIC.
73	Providing and painting two coats with synthetic enamel paint over a coat of primer to iron work of approved quality and approved shade confirmming to ISI on steel work to give an even shade in all floors at all height over a coat of primer of approved quality and shade including sand papering and making the surface smooth with cost, coveyance, loading and unloading, of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by Engineer-in-charge
74	PART-B (INTERNAL PH & WATER SUPPLY)Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes Ashrivad make conforming to IS: 15778, having thermal stability for hot & cold water supply, including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.
75	20mm dia C-PVC pipe Ground floor
76	25mm dia C-PVC pipe Ground floor
77	32mm dia C-PVC pipe Ground floor
78	40mm dia C-PVC pipe Ground floor
79	50mm dia C-PVC pipe Ground floor
80	20mm dia C-PVC pipeFirst Floor
81	25mm dia C-PVC pipeFirst Floor
82	32mm dia C-PVC pipeFirst Floor
83	40mm dia C-PVC pipeFirst Floor
84	50mm dia C-PVC pipeFirst Floor
85	Supplying all materials,labours,T&P and cutting holes through existing brickwork including making good the damages in cement mortar (1:4) for taking GI /CPVC /PVC pipes and fittings etc all complete as per PH specification and direction of Engineer-in-charge.
86	250mm thick wall - in GF
87	250mm thick wall - in FF
88	Supplying all materials,labours,T&P for cutting holes through existing RCC floors & roofs including making good the damages for taking GI pipes and fittings/PVC pipes and fittings etc all complete as per PH specification and direction of Engineer-in-charge.
89	GF
90	FF
91	Supplying all materials,labours,T&P for cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per direction of Engineer-in-charge.
92	GF
93	FF
94	Providing, Supplying & Fixing of wall mounted EWC with PP seat cover,Hinges,Accessories Set with approved size with all fittings & fixtures complete including making good the damages . including cost of all materials, labour,, T&P, lead, royality etc.complete in all respects as per direction of Engineer in charge. EWC (Jaquar make:CNS-WHT-551PNPP184LZ) & connection pipe (Jaquar make:ALD 803AB)
95	Supplying all materials, labour T&P and fixingWall hung Basin of size 560x415x200 mm of (Jaquar Make : CNS-WHT-801) or equivalent type of approved make with Half Pedestal (Jaquar Make : CNS-WHT-305) with CP waste coupling nut of (Jaquar make-ALD 727) and 15mm x 450mm PVC connection pipe of (Jaquar make:ALD 803AB) with hole for pillar taps with nut bolt including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete,of 15mm dia nominal bore and making connection with pillar cocks and supply mains for wash basin, fixing etc all complete as per specification and direction of theEngineer-In-Charge.
96	Supplying all materials, labour, T & P and fitting and fixing 15mm dia CP pillar cock withsupply of all jointing materials complete as per specification and direction of the Engineer - in - charge. (Make: Jaquare FLR- 5011N)
97	Supplying all materials, labour, T&P and fitting and fixing 15mm CP 2 way bib cockwith supply of jointing materials complete as per specification and direction of EIC. (Jauare FLR - 5041N)
98	Supplying all materials, labour, T&P and fitting & fixing 15mm dia CP bib cock with supply ofjointing materials completeas per specification and direction of the Engineer in charge.(Make:Jaquare FLR - 5047N)
99	Supplying all materials, labour, T&P and fitting & fixing 15mm dia CP angular stop cock with supply of all jointing materials completeas per specification and direction of the Engineer in charge. (Make: Jaquare FLR- 5053N)
100	Supplying all materials, labour,T&P fitting and fixing of different size brass / GM fullway valve of approved make complete as per specificationand direction of theEngineer-in-Charge. 32mm Fullway Valve
101	Supplying all materials, labour,T&P fitting and fixing of different size brass / GM fullway valve of approved make complete as per specificationand direction of theEngineer-in-Charge. 50mm Fullway Valve
102	Providing and fixingcircular type stainless steeljalli (grating) of size 125mm with hole for floor /nahani trap etc complete as per PH specification and direction of the engineer in charge
103	Supplying all materials, labour, T&P and fixing of 15mm health faucet of approved make etc complete including cost of all materials complete as per PH specification and direction of Engineering-in-charge.(Jaquar make:ALD-563)
104	Supplying all materials, labour, T&P and fixing standard sizedCP toilet paper holder of Jaquar cat. No.-AKP 35753PS or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
105	Supplying and Fixing 600mm x 450mm bevelled edge mirror of superior glass mounted on 6mm thick WPC sheet and fixed to wooden plugs with chromium plated brass screws and washer complete as per specification of Architect /Engineer in charge.
106	Providing and fixing C.P. Glass shelf 600mm longof approved make fixed to wall including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 600mm long glass shelf with guard rails (Jaquar: ACN-1171N)
107	Supplying all materials, labour, T&P and fixing standard sized CP towel rail 60cm long complete with CP brass brackets to wooden plugs with CP screwsas per specification and direction of the Engineer in charges.(Make: Jaquare ACN1111SM)
108	Supplying and Fixing standard sized Chromium Plated brass towel ring fixed to wooden plugs with Chromium Plated brass screws, complete as per specification of Architect /Engineer in charge. (JAQUAR ACN-1121BN)
109	Supplying all materials, labour, T&P and fixing standard sizedChromium Plated soap case ofcomplete with Chromium Plated brassbrackets fixed to wooden plugs with Chromium Plated brassscrews as per specification and direction of the Engineer in charge. CP soap holder jaguar,Cat No- ACN-1131N
110	Supplying all materials, labour, T&P and fixing WC Brush holder of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. (Jaquar make:AKP 35743P)
111	Supplyng all materials, labour, T&P for construction of brick masonary Gulley trap chamber of size 250mm x 250 mm with CI gulley trap, by flyash brick masonry in CM (1:4), CP (1:3) with 150mm x 150mm CI grating including labour and materials for fitting and fixing 100mm dia square mouth CI gully trap with supply of all jointing materials and encasing the gully trap with a block of CC (1:3:6) with 20mm & 10mm size hard stone metal all complete with providing and fixing of 250mm x 250mm precast RCC cover slab including cost, conveyance, taxes of all materials to site complete as per the PH specification and direction of Engineer-in-charge.
112	Constructing manholes with R.C.C top slab in (1:2:4) mix, foundation concrete (1:4:8), inside plaster 12mm thick with cement mortar (1:3) finished with neat cement punning, 12mm thick outside cement plaster (1:3), brick work with K.B bricks having crushing strength Eacht less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:5), cement concrete (1:2:4) finished smooth using 12mm size h.g chips, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber complete as per specification.Rectangular Manhole inside size 1200mm x 900mm and 900mm deep - Type - BWith RCC precast cover
113	Supplying all materials, labour, T&P for fitting & fixing and laying 100mm dia uPVC pipes with hunching fittings make including supply of all jointing materials like gaskets, adhesive, solvent cementetc. and fixing to walls with supply of wooden plugs and nails, bobbins, clamps including earth work in all kind of soil and rock and refilling the trenches including testing etc. as per PH specification and direction of EIC.
114	Supplying all materials, labour, T&P for fitting & fixing and laying 150mm dia uPVC pipes with hunching fittings make including supply of all jointing materials like gaskets, adhesive, solvent cementetc. and fixing to walls with supply of wooden plugs and nails, bobbins, clamps including earth work in all kind of soil and rock and refilling the trenches including testing etc. as per PH specification and direction of EIC.
115	Supplying all materials, labour, T&P for fitting and fixing and laying following UPVC pipes and fittings including supply of all jointing materials like Gaskets, adhesive, solvent, cement etc and fixing to walls with supply of wooden plugs and nails, bobbins, clamps including earth work in all kind of soil & rock & refilling the trenches including testing etc as per PHspecification and direction of the Engineer in charges.
116	110mm dia U-PVC SWR pipes
117	75mm dia U-PVC SWR pipes
118	110mm dia U-PVC door Tee
119	110mm dia U-PVC door bend
120	110mm dia U-PVC plain tee
121	110mm dia U-PVC plain bend
122	110mm dia U-PVC vent cowl
123	75mm dia bend Bend 87.5°
124	100mm dia bend Bend 87.5°
125	75mm U-PVC plain Tee
126	Providing 40x5 mm flat iron hold fast 40 cm long including fixing to framewith 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand: 6 graded stone aggregat 20mm nominal size) etc. complete as per direction of EIC.
127	Providing and fixing cylindrical lock premium stainless steel finish lock without pair of handles of approved quality for door, with necessary screws etc complete as per direction of Engineer- in-charge. (Make Godrej / Dorset)
128	Providing and fixing S.S finish sliding door bolts, ISI marked transparent or dyed to required colour or shade, with nuts and screws etc. complete :and as directed by Engineer -in-charge.including cost, conveyance, loading, unloading, stacking, royalties and all Materials, cost of all Labour, Sundries, T&P required for the work..(Make-Suzu)
129	Providing and fixing Matt finished S.S tower bolts (Squre type) with necessary screws etc. Complete as per direction of EIC. (Make-Suzu)
130	Providing & Fixing 150mm width Pelmet made of 19mm BWR Grade Block Board (IS-1659) with teak wood beading (polished) to the exposed edges & exposed surface laminated with 1mm thick laminate & inside surface painted with 2 coats of enamel paint over 1 coat of primer cost includes cost of all material, labour, T&P etc. complete in all respects as per specification and as per direction of Engineer-in-charge.
131	Providing and fixing cup board shutters with 25 mm thick veneered particle board IS : 3097 marked, exterior grade (Grade I), of approved make,including IInd class teak wood lipping and polishing of 25 mm wide x 12 mm thick with necessary screws and bright finished stainless steel Hydrolic auto hinges Make-Suzu . complete as per direction of Engineer-in-Charge.MAKE-Hettich. Regarding shelve slabs, item is included in RCC With wire mesh.
132	Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality etc. Complete as per direction of EIC. (Make: Suzu)
133	Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete as per direction of EIC. (Make:-Suzu)
134	Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. Complete as per direction of EIC. (MAKE-Suzu)
135	Providing fixing Fly proof stainless steel (SS 304 grade) mosquito net of 1.5mmx1.5mmx27 gauge of any size, any shape ,any colour in wooden shutter work as directed by Engineer in charge.
136	Supplying all materials, labour, T&P and fitting fixing of 2000 ltr. Capacity PVCwater tank(Sintex make ) over roof slab in proper position including providing over flow, wash out, extra socket jam nut if required complete as per specification and direction of Engineer-in-Charge including cost, carriage, taxes of all materials, cost of labour, T&P required to complete the work as per direction of EIC.
137	Providing and fixing magnetic stopper including fixing with necessary screws etc. Complete as per direction of EIC.
138	R. M Building
139	Earth work in excavation with all kinds of soil by manual/mechanical means (Hydraulic excavator) in foundation trenches or drains, including dressing of sides and ramming of bottoms and dewatering wherever required, including all lifts, including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of up to 5 km including cost of all labours/ equipments , taxes, sundries and T&P etc all complete as per the direction of Engineer-in-charge.
140	Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering etc. including all lead and lift, cost of labour ,material, conveyance,royalties and taxes ,sundries ,T & P etc.complete as per the directions of Engineer-in-charge.
141	Supplying, diluting and preparing chemical emulsion like CHLORPYRIPHOS or other chemicals approved by Central Insecticides Board or as directed by the manufacturer and spraying the mixture uniformly by sprayer as pre-constructional anti termite treatment and creating a chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of walls and floors along with external perimeter of the building, expansion joints, surrounding the pipes and conduits etc. complete at the rate of 7.5 liters (or as directed by the manufacturer) per sqm on vertical and 5.0 liters per sqm on horizontal surfaces, 50% of the emulsion to be filled in the holes made in trenches at 150mm center to center etc.complete as per IS:6313 / 1981 (Part-II) and asper the direction of theEngineer-in-charge including cost of all materials, labour etc. complete.
142	Filling in foundation, trenches and plinth with river sand in layers not exceeding 20 cm in depth, well watered and compacted in layers with top surface dressed and leveled to proper gradient including cost of all materials, conveyance, all taxes and royalties, loading and unloading, including cost of all labour, all taxes, sundries ,T & P etc. complete as per directions of the Engineer -in-charge.
143	Providing & laying cement concrete of prop. (1:4:8) in foundation bed and floors using 40mm nominal size down graded, screened, washed hard black crusher broken granite metal of approved quality & from approved quarry including laying in the layers not exceeding 100 mm thick, hoisting, lowering, laying, watering and curing etc. complete to the required levels including cost, conveyance, royaltyof all materials, cost of all labour, T&P etc. as required for the work complete and as per direction of Engineer-in-charge.
144	Brick work with flyash bricks of size 25x12x8cm in cement mortar (1:6) with best quality bricks having crushing strength not less than 75 Kg/cm2 immersing the bricks in water for not less than 6 hours before use (the bricks shall be free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes molding, chamfering, corbelling .complete as per drawing, design and specification, watering and curing for 7days including cost, conveyance, royaltyof all materials, labour, T&P etc. and as per direction of Engineer in charge.
145	In foundation & Plinth
146	Ground floor
147	First Floor
148	Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying including the cost of centering, shuttering, finishing including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. including cost, conveyance, royaltiesof all materials and cost of all labour, T&P etc. as rrequired for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. Bar and binding wires and labour charges for bending, binding and tying the grills.
149	Foundation,Plinth
150	Lintel Ground floor
151	Lintel First Floor
152	R.C.C Column & Beam Ground floor
153	R.C.C Column & Beam First Floor
154	R.C.C Roof Slab Ground floor
155	R.C.C Roof Slab First Floor
156	R.C.C Chajja Ground floor
157	R.C.C Chajja First Floor
158	R.C.C Stair Case Ground floor
159	R.C.C Stair Case First Floor
160	Supplying HYSD bars of approved quality size and grade and cutting, bending, binding and tying the grills in proper position as required for the RCC work in all floors, including cost, conveyance of HYSD bars Fe500 and above including binding wires of 18 to 20 gauge and cost of labour,T & P and other materials complete in all respact as directed by the EIC.. (Linear measurements will be taken & quantity will be calculated on standard weight. Weight of binding wire will not be considered for measurement.)
161	Ground floor
162	First Floor
163	Dressed seasoned salwood work framed and fixed (wrought and put up) in frames of doors and windows ventilators with M.S hold fast with cost, carriage of all materials and cost of all labour and T&P required to complete as per specification and direction of EIC.
164	Ground Floor
165	First Floor
166	12mm (1/2\") thick cement plaster (1:6) for finished smooth surface of brick walls after racking out the joints including watering and curing etc. comp. with cost conveyance, royalty of all materials and cost of all labour, T&P scaffolding required for the work complete as per the direction of EIC.
167	Ground Floor
168	First Floor
169	Providing 16mm thick cement plaster to the surface of external brick masonry wall with cement mortar (1:6) including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves and beads to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing, sundries and T&P etc all complete as per direction of the Engineer -in-charge
170	Ground Floor
171	First Floor
172	Providing 6mm thick cement plaster with cement mortar of (1:4) to ceilings/slab soffit. including roughening, scraping and cleaning and finishing the plastered surface smooth using wooden floats only to proper plumbs and level, making grooves and beads to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing , sundries and T&P etc all complete as per direction of the Engineer -in-charge
173	Ground Floor
174	First Floor
175	Supplying, fitting & fixing of Matt Finished premium series tiles in floors of size 1000mmx 1000mm/ 1200mmX600mm of approved make confirming to IS:13755 laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge .(Make- Somany / RAK/ Kajaria)
176	Ground Floor
177	First Floor
178	Providing and fixing 16-18 mm thick gang saw cut, mirror polished, premoulded and prepolished, granite machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab Granite of any colour and shade upto 0.50 Sqm
179	Ground Floor
180	First floor
181	Supplying all materials, labour, T&P and fixing antiskid ceramic floor tile of 300mmx300mm size of approved brand and shade on 25mm thick cement mortar (1:1) (1 cement:1 sand)jointed with neat cement, slurry mixed with pigment to match the shed of tilescomplete as per specification and direction of EIC including cost, carriage of all materials cost of all labour, T&P required to complete the work.(Tiles should be of Somany / RAK/ Kajaria).
182	GroundFloor
183	First Floor
184	Providing and fixing 1st quality 300x600mm ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades of any size as approved by Engineer- in- charge, in skirting, risers of steps and dados, over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete (Tile should be of Somany / RAK / Kajaria).(Toilet)
185	Ground Floor
186	First Floor
187	Providing and fixing of35mm thickWPC Door Shutter(Solid) with teak edge leaping to the periphery of the shutter with pilishing as per detailed drawing with including, all hardwares & fixtures, SS tower bolt(150mm),Door stopper,SS aldrop(250mm),SS handle(200mm length),ss handle (150mm length) & SS Butt hinges -125mm x 65mm x2.12mm .including cost, conveyance, loading, T&P required for the work etc. complete in all respect as directed by the Engineer-in-charge
188	Ground Floor
189	First Floor
190	Providing and fixing of factory made UPVC 2-track Sliding / 3 track window complete, comprising UPVC multi-chambered frame of size 67mm x 54mm with wall thickness of 2.3mm (+-0.2mm) having in-built UPVC roller track on top and UPVC sash of size 64mm x 47mm with wall thickness of 2.3mm (+-0.2mm) duly reinforced with G.I. section 1.2mm (+-0.2mm), wherever required. All corners of frame and sash will be fusion welded. After placing 5mm Clear Annealed glass in the sash, UPVC glazing bead, interlock, EPDM gasket, brush will be provided including hardware, i.e., touch lock and rollers & proper drainage system shall be provided. Window shall be fixed to the wall with 100mm long and 8mm dia. Fasteners and complete in all respect as per direction of Engineer-In-Charge. (Make LG / WINTECH / TECHNAL /BUILTIFY)
191	Ground floor
192	First floor
193	Providing and fixing factory made uPVC door frame with 24mm thick PVC door shutter made up of UPVC extruded section for frame and made of styles and rails of a UPVC hollow setions as per drawing to be provided by the department and as per direction of EIC. (Make: Koemmerling / Encraft India Pvt. Ltd / Lingel windows and door technologies pvt ltd. / Torfenster) (Sliding door )
194	Supplying fitting and fixing of UPVC louvers including cost of all materials, cost of all fittings with 5 mm clear glassand cost of all labour, all taxes andT&P etc. complete as per direction of EIC.
195	Supplying fitting fixing of 30 mm FRP shutter including cost of all materials, labour, all taxes, transportation, loading & unloading etc. complete as per specification and direction of Engineer -in-charge. (inside should made with 2nd class wood frame)
196	Ground floor
197	First Floor
198	Supplying fitting fixing of 100mmx 75mm FRP door frame including cost of all materials, labour, all taxes, transportation, loading & unloading etc. complete as per specification and direction of Engineer -in-charge. (inside should made with 2nd class wood frame)
199	Ground floor
200	First Floor
201	Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90 mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification buffing, polishing etc with cost, conveyance of all materials, labour, T&P etc required for the complete in all respect as per direction of EIC. (Make:- Jindal)
202	Ground floor
203	First Floor
204	Painting two coats with appd. Brand of Plastic emulsion paint of appd. Shade and quality over a coat of approved primer to inside wall including cost of paint, primer, putty, scaffolding, cost ofall labour and materials required for the work etc. comp. (paints of Berger, Nerolac, J&N & Asian ICIBrand is to be used.).(Interior, ceiling)
205	Ground Floor
206	First Floor
207	Weather coat two coats of approved brand and shade over a coat of water based primer of approved quality and approved shadeexterior surface of wall exposed to weather including cost of brush, scaffolding, staging charges with cost, conveyance of all materials, cost of all labour, T&P etc. complete as directed by EIC. (Weather coat should of ICI/Berger/Asian is to be used)
208	Ground Floor
209	First Floor
210	Providing & Applying priming coat with water bound wall Cement primer of approved brand and manufacture and of approved quality and shade on plastered surface of wall ncluding cost, coveyance, loading and unloadingof all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge.
211	GF
212	FF
213	Finishing wall surface with Acrylic wall putty (water based) of approved make and finished smooth & even surface to receive painting including cost of scaffolding etc. with cost of all materials, labour T&P etc complete as per direction of EIC
214	Ground floor
215	First Floor
216	Providing waterproofing for Roof Top Surface :- Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of:(i) Ist course of applying cement slurry @ 4.4 kg/Sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.(ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface.(iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg.per Sqm of area.(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to Each other with bitumen @ 1.7 kg/Sqm) including cost, coveyance, loading and unloading and of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge.
217	2.5cm thick grading concrete (1:2:2) on roof slab with 6mm size hard granite chips of approved quality from approved quarry including hoisting and laying concrete,watering and curingincluding cost, conveyance, royalities of all materials, cost of all labour, T & P required for the work etc.required to complete as per direction of EIC.
218	PART-B (INTERNAL PH & WATER SUPPLY)Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes Ashrivad make conforming to IS: 15778, having thermal stability for hot & cold water supply, including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.
219	20mm dia C-PVC pipe Ground floor
220	25mm dia C-PVC pipe Ground floor
221	32mm dia C-PVC pipe Ground floor
222	40mm dia C-PVC pipe Ground floor
223	50mm dia C-PVC pipe Ground floor
224	20mm dia C-PVC pipeFirst Floor
225	25mm dia C-PVC pipeFirst Floor
226	32mm dia C-PVC pipeFirst Floor
227	40mm dia C-PVC pipeFirst Floor
228	50mm dia C-PVC pipeFirst Floor
229	Supplying all materials,labours,T&P and cutting holes through existing brickwork including making good the damages in cement mortar (1:4) for taking GI /CPVC /PVC pipes and fittings etc all complete as per PH specification and direction of Engineer-in-charge.
230	250mm thick wall -- in GF
231	250mm thick wall -- in FF
232	Supplying all materials,labours,T&P for cutting holes through existing RCC floors & roofs including making good the damages for taking GI pipes and fittings/PVC pipes and fittings etc all complete as per PH specification and direction of Engineer-in-charge.
233	Ground floor
234	First Floor
235	Supplying all materials,labours,T&P for cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per direction of Engineer-in-charge.
236	Ground floor
237	First Floor
238	Providing and installing Single Piece WC with PP Soft Close Seat Cover, Hinges, Dual Flush Cistern Fitting, Fixing Accessories and Accessories Set, Size: 370x690x680 mm, S Trap- 300 mm to the floor with wooden plug and chromimum plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification and directionof the Engineer-in-Charge. Single piece EWC (Jaquar Make : CNS-WHT-851S300SPP) & connection pipe (Jaquar make:ALD 803AB)
239	Supplying all material, labour T&P and fixtures for providing and fixing of Vitreous China Corner wash basin of size 350x350mm of Hindware make having cat no 10055 or equivalent type of approved make with CP waste coupling nut of (Jaquar make-ALD 727) and 15mm x 450mm PVC connection pipe of (Jaquar make:ALD 803AB) with MS bracket with wooden plugs CP screws including cost of cement, sand, labour, T&P etc. complete including testing cost, conveyance, royalty and taxes of all materials etc. complete as per PH specification and direction of Engineer-in-charge.
240	Supplying all materials, labour T&P and fixing Percoline lavatory Sink (600 x 450 x 250mm) with hole for pillar taps with nut bolt including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete,of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for sink, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of theEngineer-In-Charge.(HINDWARE/CERA).
241	Supplying all materials, labour, T&P and fitting and fixing PVCincluding brass check nut complete as per specification and direction of the Engineer-in-Charge.
242	Supplying all materials, labour, T&P and fixing standard sizedWall Mixer of Jaquar Cat. No.-KUP 35683KPM with provision for Shower tube SHA 549D8 and Hand shower HSH 35537 shower hook SHA 566R or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
243	Supplying all materials, labour, T & P and fitting and fixing 15mm dia CP pillar cock withsupply of all jointing materials complete as per specification and direction of the Engineer - in - charge. (Make: Jaquare FLR- 5011N)
244	Supplying all materials, labour, T&P and fitting and fixing 15mm CP 2 way bib cockwith supply of jointing materials complete as per specification and direction of EIC. (Jauare FLR - 5041N)
245	Supplying all materials, labour, T&P and fixing standard sizedsink cock of Jaquar make No.-FLR-5021M) or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
246	Supplying all materials, labour, T&P and fitting & fixing 15mm dia CP bib cock with supply ofjointing materials completeas per specification and direction of the Engineer in charge.(Make:Jaquare FLR - 5047N)
247	Supplying all materials, labour, T&P and fitting & fixing 15mm dia CP angular stop cock with supply of all jointing materials completeas per specification and direction of the Engineer in charge. (Make: Jaquare FLR- 5053N)
248	Supplying all materials, labour,T&P fitting and fixing of different size brass / GM fullway valve of approved make complete as per specificationand direction of theEngineer-in-Charge. 32mm Fullway Valve
249	Supplying all materials, labour,T&P fitting and fixing of different size brass / GM fullway valve of approved make complete as per specificationand direction of theEngineer-in-Charge.50mm Fullway Valve
250	Providing and fixingcircular type stainless steeljalli (grating) of size 125mm with hole for floor /nahani trap etc complete as per PH specification and direction of the engineer in charge
251	Supplying all materials, labour, T&P and fixing of 15mm health faucet of approved make etc complete including cost of all materials complete as per PH specification and direction of Engineering-in-charge.(Jaquar make:ALD-563)
252	Supplying all materials, labour, T&P and fixing of 120mm round overhead shower of (Jaquar make:OHS-1789) with arm SHA 49483 or equivalent etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
253	Supplying all materials, labour, T&P and fixing standard sizedCP toilet paper holder of Jaquar cat. No.-AKP 35753PS or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
254	Supplying and Fixing 600mm x 450mm bevelled edge mirror of superior glass mounted on 6mm thick WPC sheet and fixed to wooden plugs with chromium plated brass screws and washer complete as per specification of Architect /Engineer in charge.
255	Providing and fixing C.P. Glass shelf 600mm longof approved make fixed to wall including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 600mm long glass shelf with guard rails (Jaquar: ACN-1171N)
256	Supplying all materials, labour, T&P and fixing standard sized CP towel rail 60cm long complete with CP brass brackets to wooden plugs with CP screwsas per specification and direction of the Engineer in charges.(Make: Jaquare ACN1111SM)
257	Supplying and Fixing standard sized Chromium Plated brass towel ring fixed to wooden plugs with Chromium Plated brass screws, complete as per specification of Architect /Engineer in charge. (JAQUAR ESSCO MAKE, CAT-AEC-1121BN)
258	Supplying all materials, labour, T&P and fixing standard sizedChromium Plated soap case ofcomplete with Chromium Plated brassbrackets fixed to wooden plugs with Chromium Plated brassscrews as per specification and direction of the Engineer in charge. CP soap holder jaguar,Cat No- ACN-1131N
259	Supplying all materials, labour, T&P and fixing WC Brush holder of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. (Jaquar make:AKP 35743P)
260	Supplyng all materials, labour, T&P for construction of brick masonary Gulley trap chamber of size 250mm x 250 mm with CI gulley trap, by flyash brick masonry in CM (1:4), CP (1:3) with 150mm x 150mm CI grating including labour and materials for fitting and fixing 100mm dia square mouth CI gully trap with supply of all jointing materials and encasing the gully trap with a block of CC (1:3:6) with 20mm & 10mm size hard stone metal all complete with providing and fixing of 250mm x 250mm precast RCC cover slab including cost, conveyance, taxes of all materials to site complete as per the PH specification and direction of Engineer-in-charge.
261	Constructing manholes with R.C.C top slab in (1:2:4) mix, foundation concrete (1:4:8), inside plaster 12mm thick with cement mortar (1:3) finished with neat cement punning, 12mm thick outside cement plaster (1:3), brick work with K.B bricks having crushing strength Eacht less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:5), cement concrete (1:2:4) finished smooth using 12mm size h.g chips, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber complete as per specification.Rectangular Manhole inside size 1200mm x 900mm and 900mm deep - Type - BWith RCC precast cover
262	Supplying all materials, labour, T&P for fitting & fixing and laying 100mm dia uPVC pipes with hunching fittings make including supply of all jointing materials like gaskets, adhesive, solvent cementetc. and fixing to walls with supply of wooden plugs and nails, bobbins, clamps including earth work in all kind of soil and rock and refilling the trenches including testing etc. as per PH specification and direction of EIC.
263	Supplying all materials, labour, T&P for fitting & fixing and laying 150mm dia uPVC pipes with hunching fittings make including supply of all jointing materials like gaskets, adhesive, solvent cementetc. and fixing to walls with supply of wooden plugs and nails, bobbins, clamps including earth work in all kind of soil and rock and refilling the trenches including testing etc. as per PH specification and direction of EIC.
264	Supplying all materials, labour, T&P for fitting and fixing and laying following UPVC pipes and fittings including supply of all jointing materials like Gaskets, adhesive, solvent, cement etc and fixing to walls with supply of wooden plugs and nails, bobbins, clamps including earth work in all kind of soil & rock & refilling the trenches including testing etc as per PHspecification and direction of the Engineer in charges.
265	110mm dia U-PVC SWR pipes
266	75mm dia U-PVC SWR pipes
267	110mm dia U-PVC door Tee
268	110mm dia U-PVC door bend
269	110mm dia U-PVC plain tee
270	110mm dia U-PVC plain bend
271	110mm dia U-PVC vent cowl
272	75mm dia bend Bend 87.5°
273	100mm dia bend Bend 87.5°
274	75mm U-PVC plain Tee
275	Providing 40x5 mm flat iron hold fast 40 cm long including fixing to framewith 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand: 6 graded stone aggregat 20mm nominal size) etc. complete as per direction of EIC.
276	Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for door, with necessary screws etc complete as per direction of Engineer- in-charge. (Make Godrej )
277	Providing and fixing Matt finished S.S tower bolts (Squre type) with necessary screws etc. Complete as per direction of EIC.(Make-Suzu)
278	Providing & Fixing 150mm width Pelmet made of 19mm BWR Grade Block Board (IS-1659) with teak wood beading (polished) to the exposed edges & exposed surface laminated with 1mm thick laminate & inside surface painted with 2 coats of enamel paint over 1 coat of primer cost includes cost of all material, labour, T&P etc. complete in all respects as per specification and as per direction of Engineer-in-charge.
279	Providing and fixing cup board shutters with 25 mm thick veneered particle board IS : 3097 marked, exterior grade (Grade I), of approved make,including IInd class teak wood lipping and polishing of 25 mm wide x 12 mm thick with necessary screws and bright finished stainless steel Hydrolic auto hinges Make-Suzu . complete as per direction of Engineer-in-Charge.MAKE-Hettich. Regarding shelve slabs, item is included in RCC With wire mesh.
280	Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality etc. Complete as per direction of EIC. (Make: Suzu)
281	Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete as per direction of EIC. (Make:-Suzu)
282	Providing fixing Fly proof stainless steel (SS 304 grade) mosquito net of 1.5mmx1.5mmx27 gauge of any size, any shape ,any colour in wooden shutter work as directed by Engineer in charge.
283	Supplying all materials, labour, T&P and fitting fixing of 2000 ltr. Capacity PVCwater tank(Sintex make ) over roof slab in proper position including providing over flow, wash out, extra socket jam nut if required complete as per specification and direction of Engineer-in-Charge including cost, carriage, taxes of all materials, cost of labour, T&P required to complete the work as per direction of EIC.
284	Providing and fixing geyser including cost of all Labour, Sundries, T&P required for the workas per specification and direction of the Engineer-in-Charge.(V GUARD VICTO PLUS 15L 5 STAR WHITE-BLACK)
285	STAFF/OFFICER\"S HOSTEL
286	Earth work in excavation by manual/mechanical means (Hydraulic excavator) in foundation trenches or drains, including dressing of sides and ramming of bottoms and dewatering wherever required, including all lifts, including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 5km including cost of all labours/ equipments , taxes, sundries and T&P etc all complete as per the direction of Engineer-in-charge.
287	Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering etc. including all lead and lift, cost of labour ,material, conveyance,royalties and taxes ,sundries ,T & P etc.complete as per the directions of Engineer-in-charge.
288	Supplying, diluting and preparing chemical emulsion like CHLORPYRIPHOS or other chemicals approved by Central Insecticides Board or as directed by the manufacturer and spraying the mixture uniformly by sprayer as pre-constructional anti termite treatment and creating a chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of walls and floors along with external perimeter of the building, expansion joints, surrounding the pipes and conduits etc. complete at the rate of 7.5 liters (or as directed by the manufacturer) per sqm on vertical and 5.0 liters per sqm on horizontal surfaces, 50% of the emulsion to be filled in the holes made in trenches at 150mm center to center etc.complete as per IS:6313 / 1981 (Part-II) and asper the direction of theEngineer-in-charge including cost of all materials, labour etc. complete.
289	Filling in foundation, trenches and plinth with river sand in layers not exceeding 20 cm in depth, well watered and compacted in layers with top surface dressed and leveled to proper gradient including cost of all materials, conveyance, all taxes and royalties, loading and unloading, including cost of all labour, all taxes, sundries ,T & P etc. complete as per directions of the Engineer -in-charge.
290	Providing & laying cement concrete of prop. (1:4:8) in foundation bed and floors using 40mm nominal size down graded, screened, washed hard black crusher broken granite metal of approved quality & from approved quarry including laying in the layers not exceeding 100 mm thick, hoisting, lowering, laying, watering and curing etc. complete to the required levels including cost, conveyance, royaltyof all materials, cost of all labour, T&P etc. as required for the work complete and as per direction of Engineer-in-charge.
291	Brick work with flyash bricks of size 25x12x8cm in cement mortar (1:6) with best quality bricks having crushing strength not less than 75 Kg/cm2 immersing the bricks in water for not less than 6 hours before use (the bricks shall be free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes molding, chamfering, corbelling .complete as per drawing, design and specification, watering and curing for 7days including cost, conveyance, royaltyof all materials, labour, T&P etc. and as per direction of Engineer in charge.
292	In foundation & Plinth
293	Ground Floor
294	First Floor
295	Second Floor
296	Third Floor
297	Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying including the cost of centering, shuttering, finishing including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. including cost, conveyance, royaltiesof all materials and cost of all labour, T&P etc. as rrequired for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. Bar and binding wires and labour charges for bending, binding and tying the grills.
298	Foundation,Plinth
299	LintelGF
300	LintelFF
301	LintelSF
302	LintelTF
303	R.C.C Column & Beam GF
304	R.C.C Column & Beam FF
305	R.C.C Column & Beam SF
306	R.C.C Column & Beam TF
307	R.C.C Roof Slab GF
308	R.C.C Roof Slab FF
309	R.C.C Roof Slab SF
310	R.C.C Roof Slab TF
311	R.C.C Chajja GF
312	R.C.C Chajja FF
313	R.C.C Chajja SF
314	R.C.C Chajja TF
315	R.C.C Stair Case GF
316	R.C.C Stair Case FF
317	R.C.C Stair Case SF
318	R.C.C Stair Case TF
319	Supplying HYSD bars of approved quality size and grade and cutting, bending, binding and tying the grills in proper position as required for the RCC work in all floors, including cost, conveyance of HYSD bars Fe500 and above including binding wires of 18 to 20 gauge and cost of labour,T & P and other materials complete in all respact as directed by the EIC.. (Linear measurements will be taken & quantity will be calculated on standard weight. Weight of binding wire will not be considered for measurement.)
320	Ground floor
321	First Floor
322	Second floor
323	Third Floor
324	Dressed seasoned salwood work framed and fixed (wrought and put up) in frames of doors and windows ventilators with M.S hold fast with cost, carriage of all materials and cost of all labour and T&P required to complete as per specification and direction of EIC.
325	Ground Floor
326	First Floor
327	Second Floor
328	Third Floor
329	12mm (1/2\") thick cement plaster (1:6) for finished smooth surface of brick walls after racking out the joints including watering and curing etc. comp. with cost conveyance, royalty of all materials and cost of all labour, T&P scaffolding required for the work complete as per the direction of EIC.
330	Ground Floor
331	First Floor
332	Second Floor
333	Third Floor
334	Providing 16mm thick cement plaster to the surface of external brick masonry wall with cement mortar (1:6) including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves and beads to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing, sundries and T&P etc all complete as per direction of the Engineer -in-charge
335	Ground Floor
336	First Floor
337	Second Floor
338	Third Floor
339	Providing 6mm thick cement plaster with cement mortar of (1:4) to ceilings/slab soffit. including roughening, scraping and cleaning and finishing the plastered surface smooth using wooden floats only to proper plumbs and level, making grooves and beads to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing , sundries and T&P etc all complete as per direction of the Engineer -in-charge
340	Ground Floor
341	First Floor
342	Second Floor
343	Third Floor
344	Supplying, fitting & fixing of Vitrified premium series tiles in floors of size 600mmx 600mm of approved make confirming to IS:13755 laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge
345	Ground Floor
346	First Floor
347	Second Floor
348	Third Floor
349	Providing and fixing 16-18 mm thick gang saw cut, mirror polished, premoulded and prepolished, granite machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab Granite of any colour and shade upto 0.50 Sqm
350	Ground Floor
351	First Floor
352	Second Floor
353	Third Floor
354	Supplying all materials, labour, T&P and fixing antiskid ceramic floor tile of 300mmx300mm size of approved brand and shade on 25mm thick cement mortar (1:1) (1 cement:1 sand)jointed with neat cement, slurry mixed with pigment to match the shed of tilescomplete as per specification and direction of EIC including cost, carriage of all materials cost of all labour, T&P required to complete the work.(Tiles should be of Somany / RAK/ Kajaria).
355	GroundFloor
356	First Floor
357	Second Floor
358	Third Floor
359	Providing and fixing 1st quality 300x600mm ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades of any size as approved by Engineer- in- charge, in skirting, risers of steps and dados, over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete (Tile should be of Somany / RAK / Kajaria).(Toilet)
360	Ground Floor
361	First Floor
362	Second Floor
363	Third Floor
364	Providing and fixing of35mm thickWPC Door Shutter(Solid) with teak edge leaping to the periphery of the shutter with pilishing as per detailed drawing with including, all hardwares & fixtures, SS tower bolt(150mm),Door stopper,SS aldrop(250mm),SS handle(200mm length),ss handle (150mm length) & SS Butt hinges -125mm x 65mm x2.12mm .including cost, conveyance, loading, T&P required for the work etc. complete in all respect as directed by the Engineer-in-charge
365	Ground Floor
366	First Floor
367	Second Floor
368	Third Floor
369	Providing and fixing of factory made UPVC 2-track Sliding / 3 track window complete, comprising UPVC multi-chambered frame of size 67mm x 54mm with wall thickness of 2.3mm (+-0.2mm) having in-built UPVC roller track on top and UPVC sash of size 64mm x 47mm with wall thickness of 2.3mm (+-0.2mm) duly reinforced with G.I. section 1.2mm (+-0.2mm), wherever required. All corners of frame and sash will be fusion welded. After placing 5mm Clear Annealed glass in the sash, UPVC glazing bead, interlock, EPDM gasket, brush will be provided including hardware, i.e., touch lock and rollers & proper drainage system shall be provided. Window shall be fixed to the wall with 100mm long and 8mm dia. Fasteners and complete in all respect as per direction of Engineer-In-Charge. (Make LG / WINTECH / TECHNAL /BUILTIFY)
370	Ground Floor
371	First Floor
372	Second Floor
373	Third Floor
374	Providing and fixing factory made uPVC door frame with 24mm thick PVC door shutter made up of UPVC extruded section for frame and made of styles and rails of a UPVC hollow setions as per drawing to be provided by the department and as per direction of EIC. (Make: Koemmerling / Encraft India Pvt. Ltd / Lingel windows and door technologies pvt ltd. / Torfenster) (Sliding door )
375	First Floor
376	Second Floor
377	Third Floor
378	Supplying fitting and fixing of UPVC louvers including cost of all materials, cost of all fittings with 5 mm clear glassand cost of all labour, all taxes andT&P etc. complete as per direction of EIC.
379	Ground Floor
380	First Floor
381	Second Floor
382	Third Floor
383	Supplying fitting, fixing fully glazed aluminum framed fixed windows using 15 micron anodized OEL aluminum section 2082 as out section, 9139 as mullion section, 4124 as a shutter section frame with tapered clip of section 4125, aluminum angle , rubber beading, friction stay etc. with 5mm black glass Make all cost of materials, T&P hire charges of drilling machine, labour charges etc. complete and direction of EIC.For stair
384	Supplying fitting fixing of 30 mm FRP shutter including cost of all materials, labour, all taxes, transportation, loading & unloading etc. complete as per specification and direction of Engineer -in-charge. (inside should made with 2nd class wood frame)
385	Ground Floor
386	First Floor
387	Second Floor
388	Third Floor
389	Supplying fitting fixing of 100mmx 75mm FRP door frame including cost of all materials, labour, all taxes, transportation, loading & unloading etc. complete as per specification and direction of Engineer -in-charge. (inside should made with 2nd class wood frame)
390	Ground Floor
391	First Floor
392	Second Floor
393	Third Floor
394	Providing, fitting & fixing M.S grill fabricated from MS Flat, Square bars / Round bars as per approved drawing and design including cost, conveyance & taxes of all materials, fabrication charges, fixing in position to RCC columns / walls in cement concrete (1:2:4) and making good to the damages complete as per direction of the Engineer- in- charge. The rates shall be inclusive of all cost of materials, labour, T&P shuttering etc complete as per direction of EIC.
395	Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90 mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification buffing, polishing etc with cost, conveyance of all materials, labour, T&P etc required for the complete in all respect as per direction of EIC. (Make:- Jindal)
396	Ground Floor
397	First Floor
398	Second Floor
399	Third Floor
400	Painting two coats with appd. Brand of Plastic emulsion paint of appd. Shade and quality over a coat of approved primer to inside wall including cost of paint, primer, putty, scaffolding, cost ofall labour and materials required for the work etc. comp. (paints of Berger, Nerolac, J&N & Asian ICIBrand is to be used.)..(Inside wall)
401	Ground Floor
402	First Floor
403	Second Floor
404	Third Floor
405	Weather coat two coats of approved brand and shade over a coat of water based primer of approved quality and approved shadeexterior surface of wall exposed to weather including cost of brush, scaffolding, staging charges with cost, conveyance of all materials, cost of all labour, T&P etc. complete as directed by EIC. (Weather coat should of ICI/Berger/Asian is to be used)
406	Ground Floor
407	First Floor
408	Second Floor
409	Third Floor
410	2.5cm thick grading concrete (1:2:2) on roof slab with 6mm size hard granite chips of approved quality from approved quarry including hoisting and laying concrete,watering and curingincluding cost, conveyance, royalities of all materials, cost of all labour, T & P required for the work etc.required to complete as per direction of EIC.
411	Ground Floor terrace
412	Third Floor
413	Providing waterproofing for Lift pit :- Cleaning the inside surface & exposing the all construction joints (25 mm x 25 mm grooves) & honey combs, filling & sealing with Microcrete - 4 & cementitious pressure grouting of joints with expanding grout & polymer sika Intreplast EP @ 0.5 kg + Sika Latex 0.5 kh/50 kg of cement. Providing & applying Sika Top seal 109 hi ( Two component based acrylic polymer coating ) two coats followed by a protection plaster over a bond coat of sika Latex ( 1:4:6) & finish with net cement punning complete as per manufacture specification and direction of Engineer-In-Charge.
414	Providing waterproofing for Roof Top Surface :- Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of:(i) Ist course of applying cement slurry @ 4.4 kg/Sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.(ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface.(iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg.per Sqm of area.(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to Each other with bitumen @ 1.7 kg/Sqm) including cost, coveyance, loading and unloading and of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge.
415	PART-B (INTERNAL PH & WATER SUPPLY)Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes Ashrivad make conforming to IS: 15778, having thermal stability for hot & cold water supply, including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.
416	20mm dia C-PVC pipe Ground floor
417	25mm dia C-PVC pipe Ground floor
418	32mm dia C-PVC pipe Ground floor
419	40mm dia C-PVC pipe Ground floor
420	50mm dia C-PVC pipe Ground floor
421	20mm dia C-PVC pipe First Floor
422	25mm dia C-PVC pipeFirst Floor
423	32mm dia C-PVC pipeFirst Floor
424	40mm dia C-PVC pipeFirst Floor
425	50mm dia C-PVC pipeFirst Floor
426	20mm dia C-PVC pipe 2nd Floor
427	25mm dia C-PVC pipe2nd Floor
428	32mm dia C-PVC pipe2nd Floor
429	40mm dia C-PVC pipe2nd Floor
430	50mm dia C-PVC pipe2nd Floor
431	20mm dia C-PVC pipe3rd Floor
432	25mm dia C-PVC pipe3rd Floor
433	32mm dia C-PVC pipe3rd Floor
434	40mm dia C-PVC pipe3rd Floor
435	50mm dia C-PVC pipe3rd Floor
436	Supplying all materials,labours,T&P and cutting holes through existing brickwork including making good the damages in cement mortar (1:4) for taking GI /CPVC /PVC pipes and fittings etc all complete as per PH specification and direction of Engineer-in-charge.
437	250mm thick wall -- in GF
438	250mm thick wall -- in FF
439	250mm thick wall -- in 2nd floor
440	250mm thick wall -- in 3rd floor
441	Supplying all materials,labours,T&P for cutting holes through existing RCC floors & roofs including making good the damages for taking GI pipes and fittings/PVC pipes and fittings etc all complete as per PH specification and direction of Engineer-in-charge.
442	Ground Floor
443	First Floor
444	Second Floor
445	Third Floor
446	Supplying all materials,labours,T&P for cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per direction of Engineer-in-charge.
447	Ground Floor
448	First Floor
449	Second Floor
450	Third Floor
451	Providing and installing EWC with Wall Hung Cistern, Drainage L Bend Pipe, Gasket and Installation Kit with PP normal close seat cover, Hinges, Fixing Accessories, Size: 360x475x395 mm, P Trap to the floor with wooden plug and chromimum plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification and directionof the Engineer-in-Charge. EWC (Jaquar make:CNS-WHT-551PNPP184LZ) & connection pipe (Jaquar make:ALD 803AB)
452	Supplying all material, labour T&P and fixtures for providing and fixing of Vitreous China Corner wash basin of size 350x350mm of Hindware make having cat no 10055 or equivalent type of approved make with CP waste coupling nut of (Jaquar make-ALD 727) and 15mm x 450mm PVC connection pipe of (Jaquar make:ALD 803AB) with MS bracket with wooden plugs CP screws including cost of cement, sand, labour, T&P etc. complete including testing cost, conveyance, royalty and taxes of all materials etc. complete as per PH specification and direction of Engineer-in-charge.
453	Supplying all material, labour T&P and fixtures for providing and fixing of Wall hung basin of size 560x415x200 mm of (Jaquar Make : CNS-WHT-801) or equivalent type of approved make with Half Pedestal (Jaquar Make : CNS-WHT-305) with CP waste coupling nut of (Jaquar make-ALD 727) and 15mm x 450mm PVC connection pipe of (Jaquar make:ALD 803AB) with MS bracket with wooden plugs CP screws including cost of cement, sand, labour, T&P etc. complete including testing cost, conveyance, royalty and taxes of all materials etc. complete as per PH specification and direction of Engineer-in-charge.
454	Supplying all materials, labour T&P and fixing Percoline lavatory Sink (600 x 450 x 250mm) with hole for pillar taps with nut bolt including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete,of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for sink, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of theEngineer-In-Charge.(HINDWARE/CERA).
455	Supplying all materials, labour, T&P and fixing standard sizedWall Mixer of Jaquar Cat. No.-KUP 35683KPM with provision for Shower tube SHA 549D8 and Hand shower HSH 35537 shower hook SHA 566R or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
456	Supplying all materials, labour, T & P and fitting and fixing 15mm dia CP pillar cock withsupply of all jointing materials complete as per specification and direction of the Engineer - in - charge. (Make: Jaquare FLR- 5011N)
457	Supplying all materials, labour, T&P and fitting and fixing 15mm CP 2 way bib cockwith supply of jointing materials complete as per specification and direction of EIC. (Jauare FLR - 5041N)
458	Supplying all materials, labour, T&P and fixing standard sizedsink cock of Jaquar make No.-FLR-5021M) or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
459	Supplying all materials, labour, T&P and fitting & fixing 15mm dia CP bib cock with supply ofjointing materials completeas per specification and direction of the Engineer in charge.(Make:Jaquare FLR - 5047N)
460	Supplying all materials, labour, T&P and fitting & fixing 15mm dia CP angular stop cock with supply of all jointing materials completeas per specification and direction of the Engineer in charge. (Make: Jaquare FLR- 5053N)
461	Supplying all materials, labour,T&P fitting and fixing of different size brass / GM fullway valve of approved make complete as per specificationand direction of theEngineer-in-Charge. 32mm Fullway Valve
462	Supplying all materials, labour,T&P fitting and fixing of different size brass / GM fullway valve of approved make complete as per specificationand direction of theEngineer-in-Charge. 50mm Fullway Valve
463	Providing and fixingcircular type stainless steeljalli (grating) of size 125mm with hole for floor /nahani trap etc complete as per PH specification and direction of the engineer in charge
464	Supplying all materials, labour, T&P and fixing of 15mm health faucet of approved make etc complete including cost of all materials complete as per PH specification and direction of Engineering-in-charge.(Jaquar make:ALD-563)
465	Supplying all materials, labour, T&P and fixing of 120mm round overhead shower of (Jaquar make:OHS-1789) with arm SHA 49483 or equivalent etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
466	Supplying all materials, labour, T&P and fixing standard sizedCP toilet paper holder of Jaquar cat. No.-AKP 35753PS or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
467	Supplying and Fixing 600mm x 450mm bevelled edge mirror of superior glass mounted on 6mm thick WPC sheet and fixed to wooden plugs with chromium plated brass screws and washer complete as per specification of Architect /Engineer in charge.
468	Providing and fixing C.P. Glass shelf 600mm longof approved make fixed to wall including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 600mm long glass shelf with guard rails (Jaquar: ACN-1171N)
469	Supplying all materials, labour, T&P and fixing standard sized CP towel rail 60cm long complete with CP brass brackets to wooden plugs with CP screwsas per specification and direction of the Engineer in charges.(Make: Jaquare ACN1111SM)
470	Supplying and Fixing standard sized Chromium Plated brass towel ring fixed to wooden plugs with Chromium Plated brass screws, complete as per specification of Architect /Engineer in charge. (JAQUAR ESSCO MAKE, CAT-AEC-1121BN)
471	Supplying all materials, labour, T&P and fixing standard sizedChromium Plated soap case ofcomplete with Chromium Plated brassbrackets fixed to wooden plugs with Chromium Plated brassscrews as per specification and direction of the Engineer in charge. CP soap holder jaguar,Cat No- ACN-1131N
472	Supplying all materials, labour, T&P and fixing WC Brush holder of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. (Jaquar make:AKP 35743P)
473	Supplyng all materials, labour, T&P for construction of brick masonary Gulley trap chamber of size 250mm x 250 mm with CI gulley trap, by flyash brick masonry in CM (1:4), CP (1:3) with 150mm x 150mm CI grating including labour and materials for fitting and fixing 100mm dia square mouth CI gully trap with supply of all jointing materials and encasing the gully trap with a block of CC (1:3:6) with 20mm & 10mm size hard stone metal all complete with providing and fixing of 250mm x 250mm precast RCC cover slab including cost, conveyance, taxes of all materials to site complete as per the PH specification and direction of Engineer-in-charge.
474	Constructing manholes with R.C.C top slab in (1:2:4) mix, foundation concrete (1:4:8), inside plaster 12mm thick with cement mortar (1:3) finished with neat cement punning, 12mm thick outside cement plaster (1:3), brick work with K.B bricks having crushing strength Eacht less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:5), cement concrete (1:2:4) finished smooth using 12mm size h.g chips, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber complete as per specification.Rectangular Manhole inside size 1200mm x 900mm and 900mm deep - Type - BWith RCC precast cover
475	Supplying all materials, labour, T&P for fitting & fixing and laying 100mm dia uPVC pipes with hunching fittings make including supply of all jointing materials like gaskets, adhesive, solvent cementetc. and fixing to walls with supply of wooden plugs and nails, bobbins, clamps including earth work in all kind of soil and rock and refilling the trenches including testing etc. as per PH specification and direction of EIC.
476	Supplying all materials, labour, T&P for fitting & fixing and laying 150mm dia uPVC pipes with hunching fittings make including supply of all jointing materials like gaskets, adhesive, solvent cementetc. and fixing to walls with supply of wooden plugs and nails, bobbins, clamps including earth work in all kind of soil and rock and refilling the trenches including testing etc. as per PH specification and direction of EIC.
477	Supplying all materials, labour, T&P for fitting and fixing and laying following UPVC pipes and fittings including supply of all jointing materials like Gaskets, adhesive, solvent, cement etc and fixing to walls with supply of wooden plugs and nails, bobbins, clamps including earth work in all kind of soil & rock & refilling the trenches including testing etc as per PHspecification and direction of the Engineer in charges.
478	110mm dia U-PVC SWR pipes
479	75mm dia U-PVC SWR pipes
480	110mm dia U-PVC door Tee
481	110mm dia U-PVC door bend
482	110mm dia U-PVC plain tee
483	110mm dia U-PVC plain bend
484	110mm dia U-PVC vent cowl
485	75mm dia bend Bend 87.5°
486	100mm dia bend Bend 87.5°
487	75mm U-PVC plain Tee
488	Providing 40x5 mm flat iron hold fast 40 cm long including fixing to framewith 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand: 6 graded stone aggregat 20mm nominal size) etc. complete as per direction of EIC.
489	Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for door, with necessary screws etc complete as per direction of Engineer- in-charge. (Make Godrej )
490	Providing and fixing S.S finish sliding door bolts, ISI marked transparent or dyed to required colour or shade, with nuts and screws etc. complete :and as directed by Engineer -in-charge.including cost, conveyance, loading, unloading, stacking, royalties and all Materials, cost of all Labour, Sundries, T&P required for the work..(Make-Suzu)
491	Providing and fixing Matt finished S.S tower bolts (Squre type) with necessary screws etc. Complete as per direction of EIC.(Make-Suzu)
492	Providing & Fixing 150mm width Pelmet made of 19mm BWR Grade Block Board (IS-1659) with teak wood beading (polished) to the exposed edges & exposed surface laminated with 1mm thick laminate & inside surface painted with 2 coats of enamel paint over 1 coat of primer cost includes cost of all material, labour, T&P etc. complete in all respects as per specification and as per direction of Engineer-in-charge.
493	Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. Complete as per direction of EIC. MAKE-Suzu
494	Providing fixing Fly proof stainless steel (SS 304 grade) mosquito net of 1.5mmx1.5mmx27 gauge of any size, any shape ,any colour in wooden shutter work as directed by Engineer in charge.
495	Supplying all materials, labour, T&P and fitting fixing of 2000 ltr. Capacity PVCwater tank(Sintex make ) over roof slab in proper position including providing over flow, wash out, extra socket jam nut if required complete as per specification and direction of Engineer-in-Charge including cost, carriage, taxes of all materials, cost of labour, T&P required to complete the work as per direction of EIC.
496	Providing and fixing of 6 persons lift as per specification below and direction of the Engineer-In-Charge. LIFTpassengers : 6 paxstops : ground, first, second& thirdspeed : 1m/sshaft size : 1800 mm (W) x 1760 mm (D)car size : 1100 mm (W) x 1300 mm (D) car height : 2139 mmpit depth : 1400 mmoverhead : 3920 mmdoor clear opening : 800 mm (center)landing door : 800 mm (W) x 2000 mm (H)MRLMake: Kone, Otis, Schindler, TKILShop drawing to be prepared by the contractor and approved by the EIC & PMC & architect.
497	C TYPE BUILDING (1ST FLOOR)
498	Flyash brick masonry in cement mortar (1:6) using flyash bricks having crushing strength not less than 75kg/cm2,immersing the bricks in water before use, splays cutting, circular moulding , corbelling etc.including cost of conveyance ,taxes & royalties, loading and unloading of all materials & cost of all labours ,materials, scaffolding ,watering & curing ,sundries, T & P etc. complete as per the direction of Engineer-in-charge. 1st floor
499	Providing and laying in position machine batched/ machine mixed concrete of M25 grade for reinforced cement concrete work including laying of concrete using 12 mm to 20 mm size crusher broken hard granite chips excluding the cost of centering, shuttering, and reinforcement but including admixture in recommended proportions to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer- In - Charge. including cost all materials, conveyance , royalties and taxes, loading and unloading, cost of all labour, sundries, T&P etc.complete.
500	Lintel FF
501	R.C.CBeam FF
502	R.C.C Roof Slab FF
503	R.C.C Chajja FF
504	R.C.C Stair Case FF
505	Supplying HYSD bars of approved quality size and grade and cutting, bending, binding and tying the grills in proper position as required for the RCC work in all floors, including cost, conveyance of HYSD bars Fe500 and above including binding wires of 18 to 20 gauge and cost of labour,T & P and other materials complete in all respact as directed by the EIC.. (Linear measurements will be taken & quantity will be calculated on standard weight. Weight of binding wire will not be considered for measurement.)
506	First Floor
507	Dressed seasoned salwood work framed and fixed (wrought and put up) in frames of doors and windows ventilators with M.S hold fast with cost, carriage of all materials and cost of all labour and T&P required to complete as per specification and direction of EIC. First Floor
508	12mm (1/2\") thick cement plaster (1:6) for finished smooth surface of brick walls after racking out the joints including watering and curing etc. comp. with cost conveyance, royalty of all materials and cost of all labour, T&P scaffolding required for the work complete as per the direction of EIC. First Floor
509	Providing 16mm thick cement plaster to the surface of external brick masonry wall with cement mortar (1:6) including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves and beads to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing, sundries and T&P etc all complete as per direction of the Engineer -in-charge First Floor
510	Providing 6mm thick cement plaster with cement mortar of (1:4) to ceilings/slab soffit. including roughening, scraping and cleaning and finishing the plastered surface smooth using wooden floats only to proper plumbs and level, making grooves and beads to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing , sundries and T&P etc all complete as per direction of the Engineer -in-charge First Floor
511	Supplying, fitting & fixing of Vitrified premium series tiles in floors of size 600mmx 600mm of approved make confirming to IS:13755 laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-chargeFirst Floor
512	Providing and fixing 16-18 mm thick gang saw cut, mirror polished, premoulded and prepolished, granite machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab Granite of any colour and shade upto 0.50 Sqm
513	Supplying all materials, labour, T&P and fixing antiskid ceramic floor tile of 300mmx300mm size of approved brand and shade on 25mm thick cement mortar (1:1) (1 cement:1 sand)jointed with neat cement, slurry mixed with pigment to match the shed of tilescomplete as per specification and direction of EIC including cost, carriage of all materials cost of all labour, T&P required to complete the work.(Tiles should be of Somany / RAK/ Kajaria). First Floor
514	Providing and fixing 1st quality 300x600mm ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades of any size as approved by Engineer- in- charge, in skirting, risers of steps and dados, over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete (Tile should be of Somany / RAK / Kajaria).(Toilet) First Floor
515	Providing and fixing of35mm thickWPC Door Shutter(Solid) with teak edge leaping to the periphery of the shutter with pilishing as per detailed drawing with including, all hardwares & fixtures, SS tower bolt(150mm),Door stopper,SS aldrop(250mm),SS handle(200mm length),ss handle (150mm length) & SS Butt hinges -125mm x 65mm x2.12mm .including cost, conveyance, loading, T&P required for the work etc. complete in all respect as directed by the Engineer-in-charge First Floor
516	Providing and fixing of factory made UPVC 2-track Sliding / 3 track window complete, comprising UPVC multi-chambered frame of size 67mm x 54mm with wall thickness of 2.3mm (+-0.2mm) having in-built UPVC roller track on top and UPVC sash of size 64mm x 47mm with wall thickness of 2.3mm (+-0.2mm) duly reinforced with G.I. section 1.2mm (+-0.2mm), wherever required. All corners of frame and sash will be fusion welded. After placing 5mm Clear Annealed glass in the sash, UPVC glazing bead, interlock, EPDM gasket, brush will be provided including hardware, i.e., touch lock and rollers & proper drainage system shall be provided. Window shall be fixed to the wall with 100mm long and 8mm dia. Fasteners and complete in all respect as per direction of Engineer-In-Charge. (Make LG / WINTECH / TECHNAL /BUILTIFY)
517	Supplying fitting and fixing of UPVC louvers including cost of all materials, cost of all fittings with 5 mm clear glassand cost of all labour, all taxes andT&P etc. complete as per direction of EIC. FF
518	Supplying fitting fixing of 30 mm FRP shutter including cost of all materials, labour, all taxes, transportation, loading & unloading etc. complete as per specification and direction of Engineer -in-charge. (inside should made with 2nd class wood frame)
519	Supplying fitting fixing of 100mmx 75mm FRP door frame including cost of all materials, labour, all taxes, transportation, loading & unloading etc. complete as per specification and direction of Engineer -in-charge. (inside should made with 2nd class wood frame)
520	Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90 mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification buffing, polishing etc with cost, conveyance of all materials, labour, T&P etc required for the complete in all respect as per direction of EIC. (Make:- Jindal)
521	Painting two coats with appd. Brand of Plastic emulsion paint of appd. Shade and quality over a coat of approved primer to inside wall including cost of paint, primer, putty, scaffolding, cost ofall labour and materials required for the work etc. comp. (paints of Berger, Nerolac, J&N & Asian ICIBrand is to be used.)..(Inside wall) First Floor
522	Weather coat two coats of approved brand and shade over a coat of water based primer of approved quality and approved shadeexterior surface of wall exposed to weather including cost of brush, scaffolding, staging charges with cost, conveyance of all materials, cost of all labour, T&P etc. complete as directed by EIC. (Weather coat should of ICI/Berger/Asian is to be used)
523	Providing & Applying priming coat with water bound wall Cement primer of approved brand and manufacture and of approved quality and shade on plastered surface of wall ncluding cost, coveyance, loading and unloadingof all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge.
524	Finishing wall surface with Acrylic wall putty (water based) of approved make and finished smooth & even surface to receive painting including cost of scaffolding etc. with cost of all materials, labour T&P etc complete as per direction of EIC
525	Providing waterproofing for Roof Top Surface :- Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of:(i) Ist course of applying cement slurry @ 4.4 kg/Sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.(ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface.(iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg.per Sqm of area.(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to Each other with bitumen @ 1.7 kg/Sqm) including cost, coveyance, loading and unloading and of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge.
526	2.5cm thick grading concrete (1:2:2) on roof slab with 6mm size hard granite chips of approved quality from approved quarry including hoisting and laying concrete,watering and curingincluding cost, conveyance, royalities of all materials, cost of all labour, T & P required for the work etc.required to complete as per direction of EIC.
527	PART-B (INTERNAL PH & WATER SUPPLY)Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes Ashrivad make conforming to IS: 15778, having thermal stability for hot & cold water supply, including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.
528	20mm dia C-PVC pipe First Floor
529	25mm dia C-PVC pipe First Floor
530	32mm dia C-PVC pipe First Floor
531	40mm dia C-PVC pipe First Floor
532	50mm dia C-PVC pipe First Floor
533	Supplying all materials,labours,T&P and cutting holes through existing brickwork including making good the damages in cement mortar (1:4) for taking GI /CPVC /PVC pipes and fittings etc all complete as per PH specification and direction of Engineer-in-charge. 250mm thick wall -- in FF
534	Supplying all materials,labours,T&P for cutting holes through existing RCC floors & roofs including making good the damages for taking GI pipes and fittings/PVC pipes and fittings etc all complete as per PH specification and direction of Engineer-in-charge. FF
535	Supplying all materials,labours,T&P for cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per direction of Engineer-in-charge. 15mm to 32mm dia pipe
536	Providing and installing EWC with Wall Hung Cistern, Drainage L Bend Pipe, Gasket and Installation Kit with PP normal close seat cover, Hinges, Fixing Accessories, Size: 360x475x395 mm, P Trap to the floor with wooden plug and chromimum plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification and directionof the Engineer-in-Charge.EWC (Jaquar make:CNS-WHT-551PNPP184LZ) & connection pipe (Jaquar make:ALD 803AB)
537	Supplying all material, labour T&P and fixtures for providing and fixing of Vitreous China Corner wash basin of size 350x350mm of Hindware make having cat no 10055 or equivalent type of approved make with CP waste coupling nut of (Jaquar make-ALD 727) and 15mm x 450mm PVC connection pipe of (Jaquar make:ALD 803AB) with MS bracket with wooden plugs CP screws including cost of cement, sand, labour, T&P etc. complete including testing cost, conveyance, royalty and taxes of all materials etc. complete as per PH specification and direction of Engineer-in-charge.
538	Supplying all material, labour T&P and fixtures for providing and fixing of Wall hung basin of size 560x415x200 mm of (Jaquar Make : CNS-WHT-801) or equivalent type of approved make with Half Pedestal (Jaquar Make : CNS-WHT-305) with CP waste coupling nut of (Jaquar make-ALD 727) and 15mm x 450mm PVC connection pipe of (Jaquar make:ALD 803AB) with MS bracket with wooden plugs CP screws including cost of cement, sand, labour, T&P etc. complete including testing cost, conveyance, royalty and taxes of all materials etc. complete as per PH specification and direction of Engineer-in-charge.
539	Supplying all materials, labour T&P and fixing Percoline lavatory Sink (600 x 450 x 250mm) with hole for pillar taps with nut bolt including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete,of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for sink, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of theEngineer-In-Charge.(HINDWARE/CERA).
540	Supplying all materials, labour, T&P and fitting and fixing PVCincluding brass check nut complete as per specification and direction of the Engineer-in-Charge.
541	Supplying all materials, labour, T&P and fixing standard sizedWall Mixer of Jaquar Cat. No.-KUP 35683KPM with provision for Shower tube SHA 549D8 and Hand shower HSH 35537 shower hook SHA 566R or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
542	Supplying all materials, labour, T & P and fitting and fixing 15mm dia CP pillar cock withsupply of all jointing materials complete as per specification and direction of the Engineer - in - charge. (Make: Jaquare FLR- 5011N)
543	Supplying all materials, labour, T&P and fitting and fixing 15mm CP 2 way bib cockwith supply of jointing materials complete as per specification and direction of EIC. (Jauare FLR - 5041N)
544	Supplying all materials, labour, T&P and fixing standard sizedsink cock of Jaquar make No.-FLR-5021M) or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
545	Supplying all materials, labour, T&P and fitting & fixing 15mm dia CP bib cock with supply ofjointing materials completeas per specification and direction of the Engineer in charge.(Make:Jaquare FLR - 5047N)
546	Supplying all materials, labour, T&P and fitting & fixing 15mm dia CP angular stop cock with supply of all jointing materials completeas per specification and direction of the Engineer in charge. (Make: Jaquare FLR- 5053N)
547	Supplying all materials, labour,T&P fitting and fixing of different size brass / GM fullway valve of approved make complete as per specificationand direction of theEngineer-in-Charge. 32mm Fullway Valve
548	Supplying all materials, labour,T&P fitting and fixing of different size brass / GM fullway valve of approved make complete as per specificationand direction of theEngineer-in-Charge. 50mm Fullway Valve
549	Providing and fixingcircular type stainless steeljalli (grating) of size 125mm with hole for floor /nahani trap etc complete as per PH specification and direction of the engineer in charge
550	Supplying all materials, labour, T&P and fixing of 15mm health faucet of approved make etc complete including cost of all materials complete as per PH specification and direction of Engineering-in-charge.(Jaquar make:ALD-563)
551	Supplying all materials, labour, T&P and fixing of 120mm round overhead shower of (Jaquar make:OHS-1789) with arm SHA 49483 or equivalent etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
552	Supplying all materials, labour, T&P and fixing standard sizedCP toilet paper holder of Jaquar cat. No.-AKP 35753PS or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
553	Supplying and Fixing 600mm x 450mm bevelled edge mirror of superior glass mounted on 6mm thick WPC sheet and fixed to wooden plugs with chromium plated brass screws and washer complete as per specification of Architect /Engineer in charge.
554	Providing and fixing C.P. Glass shelf 600mm longof approved make fixed to wall including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 600mm long glass shelf with guard rails (Jaquar: ACN-1171N)
555	Supplying all materials, labour, T&P and fixing standard sized CP towel rail 60cm long complete with CP brass brackets to wooden plugs with CP screwsas per specification and direction of the Engineer in charges.(Make: Jaquare ACN1111SM)
556	Supplying and Fixing standard sized Chromium Plated brass towel ring fixed to wooden plugs with Chromium Plated brass screws, complete as per specification of Architect /Engineer in charge. (JAQUAR ESSCO MAKE, CAT-AEC-1121BN)
557	Supplying all materials, labour, T&P and fixing standard sizedChromium Plated soap case ofcomplete with Chromium Plated brassbrackets fixed to wooden plugs with Chromium Plated brassscrews as per specification and direction of the Engineer in charge. CP soap holder jaguar,Cat No- ACN-1131N
558	Supplying all materials, labour, T&P and fixing WC Brush holder of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. (Jaquar make:AKP 35743P)
559	Supplyng all materials, labour, T&P for construction of brick masonary Gulley trap chamber of size 250mm x 250 mm with CI gulley trap, by flyash brick masonry in CM (1:4), CP (1:3) with 150mm x 150mm CI grating including labour and materials for fitting and fixing 100mm dia square mouth CI gully trap with supply of all jointing materials and encasing the gully trap with a block of CC (1:3:6) with 20mm & 10mm size hard stone metal all complete with providing and fixing of 250mm x 250mm precast RCC cover slab including cost, conveyance, taxes of all materials to site complete as per the PH specification and direction of Engineer-in-charge.
560	Constructing manholes with R.C.C top slab in (1:2:4) mix, foundation concrete (1:4:8), inside plaster 12mm thick with cement mortar (1:3) finished with neat cement punning, 12mm thick outside cement plaster (1:3), brick work with K.B bricks having crushing strength Eacht less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:5), cement concrete (1:2:4) finished smooth using 12mm size h.g chips, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber complete as per specification.Rectangular Manhole inside size 1200mm x 900mm and 900mm
561	Supplying all materials, labour, T&P for fitting & fixing and laying 100mm dia uPVC pipes with hunching fittings make including supply of all jointing materials like gaskets, adhesive, solvent cementetc. and fixing to walls with supply of wooden plugs and nails, bobbins, clamps including earth work in all kind of soil and rock and refilling the trenches including testing etc. as per PH specification and direction of EIC.
562	Supplying all materials, labour, T&P for fitting & fixing and laying 150mm dia uPVC pipes with hunching fittings make including supply of all jointing materials like gaskets, adhesive, solvent cementetc. and fixing to walls with supply of wooden plugs and nails, bobbins, clamps including earth work in all kind of soil and rock and refilling the trenches including testing etc. as per PH specification and direction of EIC.
563	Supplying all materials, labour, T&P for fitting and fixing and laying following UPVC pipes and fittings including supply of all jointing materials like Gaskets, adhesive, solvent, cement etc and fixing to walls with supply of wooden plugs and nails, bobbins, clamps including earth work in all kind of soil & rock & refilling the trenches including testing etc as per PHspecification and direction of the Engineer in charges.
564	110mm dia U-PVC SWR pipes
565	75mm dia U-PVC SWR pipes
566	110mm dia U-PVC door Tee
567	110mm dia U-PVC door bend
568	110mm dia U-PVC plain tee
569	110mm dia U-PVC plain bend
570	110mm dia U-PVC vent cowl
571	75mm dia bend Bend 87.5°
572	100mm dia bend Bend 87.5°
573	75mm U-PVC plain Tee
574	Providing 40x5 mm flat iron hold fast 40 cm long including fixing to framewith 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand: 6 graded stone aggregat 20mm nominal size) etc. complete as per direction of EIC.
575	Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for door, with necessary screws etc complete as per direction of Engineer- in-charge. (Make Godrej )
576	Providing and fixing S.S finish sliding door bolts, ISI marked transparent or dyed to required colour or shade, with nuts and screws etc. complete :and as directed by Engineer -in-charge.including cost, conveyance, loading, unloading, stacking, royalties and all Materials, cost of all Labour, Sundries, T&P required for the work..(Make-Suzu)
577	Providing and fixing Matt finished S.S tower bolts (Squre type) with necessary screws etc. Complete as per direction of EIC.(Make-Suzu)
578	Providing & Fixing 150mm width Pelmet made of 19mm BWR Grade Block Board (IS-1659) with teak wood beading (polished) to the exposed edges & exposed surface laminated with 1mm thick laminate & inside surface painted with 2 coats of enamel paint over 1 coat of primer cost includes cost of all material, labour, T&P etc. complete in all respects as per specification and as per direction of Engineer-in-charge.
579	Providing and fixing cup board shutters with 25 mm thick veneered particle board IS : 3097 marked, exterior grade (Grade I), of approved make,including IInd class teak wood lipping and polishing of 25 mm wide x 12 mm thick with necessary screws and bright finished stainless steel Hydrolic auto hinges Make-Suzu . complete as per direction of Engineer-in-Charge.MAKE-Hettich. Regarding shelve slabs, item is included in RCC With wire mesh.
580	Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality etc. Complete as per direction of EIC. (Make: Suzu)
581	Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete as per direction of EIC..MAKE-Suzu
582	Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. Complete as per direction of EIC. (MAKE-Suzu)
583	Supplying all materials, labour, T&P and fitting fixing of 2000 ltr. Capacity PVCwater tank(Sintex make ) over roof slab in proper position including providing over flow, wash out, extra socket jam nut if required complete as per specification and direction of Engineer-in-Charge including cost, carriage, taxes of all materials, cost of labour, T&P required to complete the work as per direction of EIC.
584	COMMUNITY HALLL
585	Earth work in excavation by manual/mechanical means (Hydraulic excavator) in foundation trenches or drains, including dressing of sides and ramming of bottoms and dewatering wherever required, including all lifts, including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 5km including cost of all labours/ equipments , taxes, sundries and T&P etc all complete as per the direction of Engineer-in-charge.
586	Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering etc. including all lead and lift, cost of labour ,material, conveyance,royalties and taxes ,sundries ,T & P etc.complete as per the directions of Engineer-in-charge.
587	Supplying, diluting and preparing chemical emulsion like CHLORPYRIPHOS or other chemicals approved by Central Insecticides Board or as directed by the manufacturer and spraying the mixture uniformly by sprayer as pre-constructional anti termite treatment and creating a chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of walls and floors along with external perimeter of the building, expansion joints, surrounding the pipes and conduits etc. complete at the rate of 7.5 liters (or as directed by the manufacturer) per sqm on vertical and 5.0 liters per sqm on horizontal surfaces, 50% of the emulsion to be filled in the holes made in trenches at 150mm center to center etc.complete as per IS:6313 / 1981 (Part-II) and asper the direction of theEngineer-in-charge including cost of all materials, labour etc. complete.
588	Filling in foundation, trenches and plinth with river sand in layers not exceeding 20 cm in depth, well watered and compacted in layers with top surface dressed and leveled to proper gradient including cost of all materials, conveyance, all taxes and royalties, loading and unloading, including cost of all labour, all taxes, sundries ,T & P etc. complete as per directions of the Engineer -in-charge.
589	Providing & laying cement concrete of prop. (1:4:8) in foundation bed and floors using 40mm nominal size down graded, screened, washed hard black crusher broken granite metal of approved quality & from approved quarry including laying in the layers not exceeding 100 mm thick, hoisting, lowering, laying, watering and curing etc. complete to the required levels including cost, conveyance, royaltyof all materials, cost of all labour, T&P etc. as required for the work complete and as per direction of Engineer-in-charge.
590	Brick work with flyash bricks of size 25x12x8cm in cement mortar (1:6) with best quality bricks having crushing strength not less than 75 Kg/cm2 immersing the bricks in water for not less than 6 hours before use (the bricks shall be free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes molding, chamfering, corbelling .complete as per drawing, design and specification, watering and curing for 7days including cost, conveyance, royaltyof all materials, labour, T&P etc. and as per direction of Engineer in charge.
591	In foundation & Plinth
592	Ground floor
593	1st floor
594	Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying including the cost of centering, shuttering, finishing including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. including cost, conveyance, royaltiesof all materials and cost of all labour, T&P etc. as rrequired for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. Bar and binding wires and labour charges for bending, binding and tying the grills.
595	Foundation,Plinth
596	Lintel GF
597	Lintel FF
598	R.C.C Column & Beam GF
599	R.C.C Column & Beam FF
600	R.C.C Roof Slab GF
601	R.C.C Roof Slab FF
602	R.C.C Chajja GF
603	R.C.C Chajja FF
604	R.C.C Stair Case GF
605	R.C.C Stair Case FF
606	Supplying HYSD bars of approved quality size and grade and cutting, bending, binding and tying the grills in proper position as required for the RCC work in all floors, including cost, conveyance of HYSD bars Fe500 and above including binding wires of 18 to 20 gauge and cost of labour,T & P and other materials complete in all respact as directed by the EIC.. (Linear measurements will be taken & quantity will be calculated on standard weight. Weight of binding wire will not be considered for measurement.)
607	Ground Floor
608	First Floor
609	Dressed seasoned salwood work framed and fixed (wrought and put up) in frames of doors and windows ventilators with M.S hold fast with cost, carriage of all materials and cost of all labour and T&P required to complete as per specification and direction of EIC.
610	Ground Floor
611	First Floor
612	12mm (1/2\") thick cement plaster (1:6) for finished smooth surface of brick walls after racking out the joints including watering and curing etc. comp. with cost conveyance, royalty of all materials and cost of all labour, T&P scaffolding required for the work complete as per the direction of EIC.
613	Ground Floor
614	First Floor
615	Providing 16mm thick cement plaster to the surface of external brick masonry wall with cement mortar (1:6) including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves and beads to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing, sundries and T&P etc all complete as per direction of the Engineer -in-charge
616	Ground Floor
617	First Floor
618	Providing 6mm thick cement plaster with cement mortar of (1:4) to ceilings/slab soffit. including roughening, scraping and cleaning and finishing the plastered surface smooth using wooden floats only to proper plumbs and level, making grooves and beads to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing , sundries and T&P etc all complete as per direction of the Engineer -in-charge
619	Ground Floor
620	First Floor
621	Supplying, fitting & fixing of Vitrified premium series tiles in floors of size 600mmx 600mm of approved make confirming to IS:13755 laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge
622	Ground Floor
623	First Floor
624	Providing and fixing 16-18 mm thick gang saw cut, mirror polished, premoulded and prepolished, granite machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab Granite of any colour and shade upto 0.50 Sqm
625	Ground Floor
626	First Floor
627	Supplying all materials, labour, T&P and fixing antiskid ceramic floor tile of 300mmx300mm size of approved brand and shade on 25mm thick cement mortar (1:1) (1 cement:1 sand)jointed with neat cement, slurry mixed with pigment to match the shed of tilescomplete as per specification and direction of EIC including cost, carriage of all materials cost of all labour, T&P required to complete the work.(Tiles should be of Somany / RAK/ Kajaria).
628	GroundFloor
629	First Floor
630	Providing and fixing 1st quality 300x600mm ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades of any size as approved by Engineer- in- charge, in skirting, risers of steps and dados, over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete (Tile should be of Somany / RAK / Kajaria).(Toilet)
631	Ground Floor
632	First Floor
633	Providing and fixing of35mm thickWPC Door Shutter(Solid) with teak edge leaping to the periphery of the shutter with pilishing as per detailed drawing with including, all hardwares & fixtures, SS tower bolt(150mm),Door stopper,SS aldrop(250mm),SS handle(200mm length),ss handle (150mm length) & SS Butt hinges -125mm x 65mm x2.12mm .including cost, conveyance, loading, T&P required for the work etc. complete in all respect as directed by the Engineer-in-charge
634	Ground Floor
635	First Floor
636	Providing and fixing of factory made uPVC Sliding window (White Colour) complete, comprising uPVC multi-chambered frame having in-built uPVC roller track on top and uPVC sash with wall thickness of 2.0mm (+-0.2 mm) duly reinforced with G.I. section 1.6 mm (+-0.2 mm), profile shall be manufactured from Tropicalized Blend with TiO2 and required additives. Profile must be colorfast and conform to standard EN12608. The profile sections should have multi hollow (min 2 to 3 chambers) chamber to include GI reinforcement with 120 GSM zinc coated, fitted in continuous length, in closed chamber. The thickness of GI should be selected to meet the wind load requirement as per IS 875- Part III on sash/mullion. Supplier should be submitting wind load calculation & validation complying with IS-875-III before material supply. Minimum steel reinforcement thickness of 1.2mm to 2.5mm. UPVC Windows & Doors must be fabricated with fusion welded corners & must conform to the strength requirements based on wind load as per IS 875-Part III. All hardware fitted should be Non-SS, except handles to be of zinc/Al. alloy casted with powder coated. Glass should be of 5mm single clear toughened Glass with weather seal (EPDM/TPE). After placing 5 mm Clear Toughned glass in the sash, uPVC glazing bead, interlock, EPDM gasket, brush shall be provided including touch lock( above 1500 mm Multi Lock ) and rollers & proper drainage system shall be provided. Window frame will be fixed to the wall with 100mm long and 8mm dia. Fasteners and after fixing frame the gap between frame & wall should be filled with silicon sealant (not more than 5 mm x 5 mm), complete in all respect as per direction of Engineer-In-Charge (Make: LG/ WINTECH/ TECHNAL/ BUILTIFY)
637	GF
638	FF
639	Providing and fixing factory made uPVC door frame with 24mm thick PVC door shutter made up of UPVC extruded section for frame and made of styles and rails of a UPVC hollow setions as per drawing to be provided by the department and as per direction of EIC. (Make: Koemmerling / Encraft India Pvt. Ltd / Lingel windows and door technologies pvt ltd. / Torfenster) (Sliding door ) GF
640	Supplying fitting and fixing of UPVC louvers including cost of all materials, cost of all fittings with 5 mm clear glassand cost of all labour, all taxes andT&P etc. complete as per direction of EIC.
641	Ground Floor
642	First Floor
643	Supplying fitting, fixing fully glazed aluminum framed fixed windows using 15 micron anodized OEL aluminum section 2082 as out section, 9139 as mullion section, 4124 as a shutter section frame with tapered clip of section 4125, aluminum angle , rubber beading, friction stay etc. with 5mm black glass Make all cost of materials, T&P hire charges of drilling machine, labour charges etc. complete and direction of EIC.
644	For stair
645	For window
646	Supplying fitting fixing of 30 mm FRP shutter including cost of all materials, labour, all taxes, transportation, loading & unloading etc. complete as per specification and direction of Engineer -in-charge. (inside should made with 2nd class wood frame)
647	Ground Floor
648	First Floor
649	Supplying fitting fixing of 100mmx 75mm FRP door frame including cost of all materials, labour, all taxes, transportation, loading & unloading etc. complete as per specification and direction of Engineer -in-charge. (inside should made with 2nd class wood frame)
650	Ground Floor
651	First Floor
652	Providing, fitting & fixing M.S grill fabricated from MS Flat, Square bars / Round bars as per approved drawing and design including cost, conveyance & taxes of all materials, fabrication charges, fixing in position to RCC columns / walls in cement concrete (1:2:4) and making good to the damages complete as per direction of the Engineer- in- charge. The rates shall be inclusive of all cost of materials, labour, T&P shuttering etc complete as per direction of EIC.
653	Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90 mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification buffing, polishing etc with cost, conveyance of all materials, labour, T&P etc required for the complete in all respect as per direction of EIC. (Make:- Jindal)
654	Ground Floor
655	First Floor
656	Providing and painting internal surface two coats with plastic emulsion paint over a coat of water based primer of approved quality and approved shade in all floors at all height by making the surface of wallsmooth including cost, coveyance, loading and unloading and of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge. (Inside wall)
657	Ground Floor
658	First Floor
659	Painting two coats with Water soluble weather coat paints of approved shade of approved make or equivalent over out side brick wall over a coat of primer, bymeans of brush to outside surface of new walls after scraping, cleaning the surface including all cost of materials, labour, all taxes, watering & curing T&P etc complete as per direction of Engineer -in-charge.
660	Ground Floor
661	First Floor
662	Providing and painting two coats with synthetic enamel paint over a coat of primer to iron work of approved quality and approved shade confirmming to ISI on steel work to give an even shade in all floors at all height over a coat of primer of approved quality and shade including sand papering and making the surface smooth with cost, coveyance, loading and unloading, of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by Engineer-in-charge
663	GF
664	Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as per direction of EIC.
665	ROOF SHEET for Banquet/BadmintonProviding & fixing cement sheet roofing 0.45-0.50 mm thick. sheet (Zindal/Everest/Charminar or equivalent approved make) fixed with G.I. hooks and boltsbitumen washers completefixed in position excludingthe cost of purlinsrafters and trusses. GI colour coated roofing Sheet 0.45-0.50 mm in thick. etc. complete as per direction of EIC.
666	ROOF RIDGE for Banquet/BadmintonProviding and fixing ridges and hips in fibre cement high impact polypropylene reinforced roofing with suitable fixing accessories or self drilling fastener and EPDM washer etc. complete.
667	Providing waterproofing for Roof Top Surface :- Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of:(i) Ist course of applying cement slurry @ 4.4 kg/Sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.(ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface.(iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg.per Sqm of area.(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to Each other with bitumen @ 1.7 kg/Sqm) including cost, coveyance, loading and unloading and of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge.
668	2.5 cm (1\"\") thick A.S flooring with C.C of prop. (1:2:4) including punning using 12mm size black hard crusher broken granite chips over PCC (1:3:6) in ground floor and after chipping and chiseling the top of floor slabs in upper floor laid to proper slope including rounding of corners,watering and curing with cost,conveyance,royalities of all materials and cost of all labour,T & P required for the work etc.as per direction of Engineer in charge.
669	Providing, fitting & fixing of wooden flooring with foam over wood work including cost of all labours, materials, conveyance, loading and unloading, all taxes and royalties, sundries and T&P etc all complete as per direction of the Engineer -in-charge.
670	Providing and fixing of carpet floor of BIS standard of 2mm thick of approved brand :etc.including cost of all labours, materials, conveyance, loading and unloading, all taxes and royalties, sundries and T&P etc all complete as per direction of the Engineer -in-charge.
671	Finishing wall surface with Acrylic wall putty (water based) of approved make and finished smooth & even surface to receive painting including cost of scaffolding etc. with cost of all materials, labour T&P etc complete as per direction of EIC
672	GF
673	FF
674	2.5cm thick grading concrete (1:2:2) on roof slab with 6mm size hard granite chips of approved quality from approved quarry including hoisting and laying concrete,watering and curingincluding cost, conveyance, royalities of all materials, cost of all labour, T & P required for the work etc.required to complete as per direction of EIC.
675	Supplying and fixing of GRC jali as per drawing including cost of materials,conveyance,taxes etccomplete as per direction of Engineer-in-charge.
676	PART-B (INTERNAL PH & WATER SUPPLY)Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes Ashrivad make conforming to IS: 15778, having thermal stability for hot & cold water supply, including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.
677	20mm dia C-PVC pipe Ground floor
678	25mm dia C-PVC pipe Ground floor
679	32mm dia C-PVC pipe Ground floor
680	40mm dia C-PVC pipe Ground floor
681	50mm dia C-PVC pipe Ground floor
682	20mm dia C-PVC pipe First Floor
683	25mm dia C-PVC pipe First Floor
684	32mm dia C-PVC pipe First Floor
685	40mm dia C-PVC pipe First Floor
686	50mm dia C-PVC pipe First Floor
687	Supplying all materials,labours,T&P and cutting holes through existing brickwork including making good the damages in cement mortar (1:4) for taking GI /CPVC /PVC pipes and fittings etc all complete as per PH specification and direction of Engineer-in-charge.
688	250mm thick wall -- in GF
689	250mm thick wall -- in FF
690	Supplying all materials,labours,T&P for cutting holes through existing RCC floors & roofs including making good the damages for taking GI pipes and fittings/PVC pipes and fittings etc all complete as per PH specification and direction of Engineer-in-charge.
691	GF
692	FF
693	Supplying all materials,labours,T&P for cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per direction of Engineer-in-charge.
694	Gf
695	Ff
696	Providing and installing EWC with Wall Hung Cistern, Drainage L Bend Pipe, Gasket and Installation Kit with PP normal close seat cover, Hinges, Fixing Accessories, Size: 360x475x395 mm, P Trap to the floor with wooden plug and chromimum plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification and directionof the Engineer-in-Charge. EWC (Jaquar make:CNS-WHT-551PNPP184LZ) & connection pipe (Jaquar make:ALD 803AB)
697	Supplying and fixingurinal of size 355x340x535 mm of jaquar make having cat no (Jaquar maake:URS-WHT-13261) with Urinal partition(Jaquar make:JSE-CHR-810UC) or equivalent and Urinal Spreader (Jaquar make:ALD-1043) of approved make including all fittings like 450mm long connection pipe, waste coupling nut, waste pipe etc of approved make etc complete as per PH specification and direction of the Engineer-in-charge.
698	Supplying all material, labour T&P and fixtures for providing and fixing of Vitreous China Corner wash basin of size 350x350mm of Hindware make having cat no 10055 or equivalent type of approved make with CP waste coupling nut of (Jaquar make-ALD 727) and 15mm x 450mm PVC connection pipe of (Jaquar make:ALD 803AB) with MS bracket with wooden plugs CP screws including cost of cement, sand, labour, T&P etc. complete including testing cost, conveyance, royalty and taxes of all materials etc. complete as per PH specification and direction of Engineer-in-charge.
699	Supplying all material, labour T&P and fixtures for providing and fixing of Wall hung basin of size 560x415x200 mm of (Jaquar Make : CNS-WHT-801) or equivalent type of approved make with Half Pedestal (Jaquar Make : CNS-WHT-305) with CP waste coupling nut of (Jaquar make-ALD 727) and 15mm x 450mm PVC connection pipe of (Jaquar make:ALD 803AB) with MS bracket with wooden plugs CP screws including cost of cement, sand, labour, T&P etc. complete including testing cost, conveyance, royalty and taxes of all materials etc. complete as per PH specification and direction of Engineer-in-charge.
700	Supplying all materials, labour, T&P and fitting and fixing PVCincluding brass check nut complete as per specification and direction of the Engineer-in-Charge.
701	Supplying all materials, labour, T&P and fixing standard sizedWall Mixer of Jaquar Cat. No.-KUP 35683KPM with provision for Shower tube SHA 549D8 and Hand shower HSH 35537 shower hook SHA 566R or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
702	Supplying all materials, labour, T & P and fitting and fixing 15mm dia CP pillar cock withsupply of all jointing materials complete as per specification and direction of the Engineer - in - charge. (Make: Jaquare FLR- 5011N)
703	Supplying all materials, labour, T&P and fitting and fixing 15mm CP 2 way bib cockwith supply of jointing materials complete as per specification and direction of EIC. (Jauare FLR - 5041N)
704	Supplying all materials, labour, T&P and fitting & fixing 15mm dia CP bib cock with supply ofjointing materials completeas per specification and direction of the Engineer in charge.(Make:Jaquare FLR - 5047N)
705	Supplying all materials, labour, T&P and fitting & fixing 15mm dia CP angular stop cock with supply of all jointing materials completeas per specification and direction of the Engineer in charge. (Make: Jaquare FLR- 5053N)
706	Supplying all materials, labour,T&P fitting and fixing of different size brass / GM fullway valve of approved make complete as per specificationand direction of theEngineer-in-Charge. 32mm Fullway Valve
707	Supplying all materials, labour,T&P fitting and fixing of different size brass / GM fullway valve of approved make complete as per specificationand direction of theEngineer-in-Charge. 50mm Fullway Valve
708	Providing and fixingcircular type stainless steeljalli (grating) of size 125mm with hole for floor /nahani trap etc complete as per PH specification and direction of the engineer in charge
709	Supplying all materials, labour, T&P and fixing of 15mm health faucet of approved make etc complete including cost of all materials complete as per PH specification and direction of Engineering-in-charge.(Jaquar make:ALD-563)
710	Supplying all materials, labour, T&P and fixing of 120mm round overhead shower of (Jaquar make:OHS-1789) with arm SHA 49483 or equivalent etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
711	Supplying all materials, labour, T&P and fixing toilet paper holder of (Jaquar make:AKP-35753PS) or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.
712	Supplying and Fixing 600mm x 450mm bevelled edge mirror of superior glass mounted on 6mm thick WPC sheet and fixed to wooden plugs with chromium plated brass screws and washer complete as per specification of Architect /Engineer in charge.
713	Providing and fixing C.P. Glass shelf 600mm longof approved make fixed to wall including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 600mm long glass shelf with guard rails (Jaquar: ACN-1171N)
714	Supplying all materials, labour, T&P and fixing standard sized CP towel rail 60cm long complete with CP brass brackets to wooden plugs with CP screwsas per specification and direction of the Engineer in charges.(Make: Jaquare ACN1111SM)
715	Supplying and Fixing standard sized Chromium Plated brass towel ring fixed to wooden plugs with Chromium Plated brass screws, complete as per specification of Architect /Engineer in charge. (JAQUAR ESSCO MAKE, CAT-AEC-1121BN)
716	Supplying all materials, labour, T&P and fixing standard sizedChromium Plated soap case ofcomplete with Chromium Plated brassbrackets fixed to wooden plugs with Chromium Plated brassscrews as per specification and direction of the Engineer in charge. CP soap holder jaguar,Cat No- ACN-1131N
717	Supplying all materials, labour, T&P and fixing WC Brush holder of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. (Jaquar make:AKP 35743P)
718	Supplyng all materials, labour, T&P for construction of brick masonary Gulley trap chamber of size 250mm x 250 mm with CI gulley trap, by flyash brick masonry in CM (1:4), CP (1:3) with 150mm x 150mm CI grating including labour and materials for fitting and fixing 100mm dia square mouth CI gully trap with supply of all jointing materials and encasing the gully trap with a block of CC (1:3:6) with 20mm & 10mm size hard stone metal all complete with providing and fixing of 250mm x 250mm precast RCC cover slab including cost, conveyance, taxes of all materials to site complete as per the PH specification and direction of Engineer-in-charge.
719	Constructing manholes with R.C.C top slab in (1:2:4) mix, foundation concrete (1:4:8), inside plaster 12mm thick with cement mortar (1:3) finished with neat cement punning, 12mm thick outside cement plaster (1:3), brick work with K.B bricks having crushing strength Eacht less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:5), cement concrete (1:2:4) finished smooth using 12mm size h.g chips, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber complete as per specification.Rectangular Manhole inside size 1200mm x 900mm and 900mm deep - Type - BWith RCC precast cover
720	Supplying all materials, labour, T&P for fitting & fixing and laying 100mm dia uPVC pipes with hunching fittings make including supply of all jointing materials like gaskets, adhesive, solvent cementetc. and fixing to walls with supply of wooden plugs and nails, bobbins, clamps including earth work in all kind of soil and rock and refilling the trenches including testing etc. as per PH specification and direction of EIC.
721	Supplying all materials, labour, T&P for fitting & fixing and laying 150mm dia uPVC pipes with hunching fittings make including supply of all jointing materials like gaskets, adhesive, solvent cementetc. and fixing to walls with supply of wooden plugs and nails, bobbins, clamps including earth work in all kind of soil and rock and refilling the trenches including testing etc. as per PH specification and direction of EIC.
722	Supplying all materials, labour, T&P for fitting and fixing and laying following UPVC pipes and fittings including supply of all jointing materials like Gaskets, adhesive, solvent, cement etc and fixing to walls with supply of wooden plugs and nails, bobbins, clamps including earth work in all kind of soil & rock & refilling the trenches including testing etc as per PHspecification and direction of the Engineer in charges.
723	110mm dia U-PVC SWR pipes
724	75mm dia U-PVC SWR pipes
725	110mm dia U-PVC door Tee
726	110mm dia U-PVC door bend
727	110mm dia U-PVC plain tee
728	110mm dia U-PVC plain bend
729	110mm dia U-PVC vent cowl
730	75mm dia bend Bend 87.5°
731	100mm dia bend Bend 87.5°
732	75mm U-PVC plain Tee
733	Providing 40x5 mm flat iron hold fast 40 cm long including fixing to framewith 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand: 6 graded stone aggregat 20mm nominal size) etc. complete as per direction of EIC.
734	Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for door, with necessary screws etc complete as per direction of Engineer- in-charge. (Make Godrej )
735	Providing and fixing S.S finish sliding door bolts, ISI marked transparent or dyed to required colour or shade, with nuts and screws etc. complete :and as directed by Engineer -in-charge.including cost, conveyance, loading, unloading, stacking, royalties and all Materials, cost of all Labour, Sundries, T&P required for the work..(Make-Suzu)
736	Providing and fixing Matt finished S.S tower bolts (Squre type) with necessary screws etc. Complete as per direction of EIC.(Make-Suzu)
737	Supplying all materials, labour, T&P and fitting fixing of 2000 ltr. Capacity PVCwater tank(Sintex make ) over roof slab in proper position including providing over flow, wash out, extra socket jam nut if required complete as per specification and direction of Engineer-in-Charge including cost, carriage, taxes of all materials, cost of labour, T&P required to complete the work as per direction of EIC.
738	RECHARGE PIT
739	Earth work in excavation by manual/mechanical means (Hydraulic excavator) in foundation trenches or drains, including dressing of sides and ramming of bottoms and dewatering wherever required, including all lifts, including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 5km including cost of all labours/ equipments , taxes, sundries and T&P etc all complete as per the direction of Engineer-in-charge.
740	Filling in foundation, trenches and plinth with river sand in layers not exceeding 20 cm in depth, well watered and compacted in layers with top surface dressed and leveled to proper gradient including cost of all materials, conveyance, all taxes and royalties, loading and unloading, including cost of all labour, all taxes, sundries ,T & P etc. complete as per directions of the Engineer -in-charge.
741	Providing & laying cement concrete of prop. (1:3:6) in foundation bed and floors using 40mm nominal size down graded, screened, washed hard black crusher broken granite metal of approved quality & from approved quarry including laying in the layers not exceeding 100 mm thick, hoisting, lowering, laying, watering and curing etc. complete to the required levels including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. as required for the work complete and as per direction of Engineer-in-charge.
742	Providing and laying in position machine batched and machine mixed M-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying including the cost of centering, shuttering, finishing including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.(Note :- Cement content considered in this item is @ 400 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately) including cost, conveyance, royaltiesof all materials and cost of all labour, T&P etc. as rrequired for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. Bar and binding wires and labour charges for bending, binding and tying the grills.
743	Supplying HYSD bars of approved quality size and grade and cutting, bending, binding and tying the grills in proper position as required for the RCC work in all floors, including cost, conveyance of HYSD bars Fe500 and above including binding wires of 18 to 20 gauge and cost of labour,T & P and other materials complete in all respact as directed by the EIC.. (Linear measurements will be taken & quantity will be calculated on standard weight. Weight of binding wire will not be considered for measurement.)
744	Rigid and smooth centering and shuttering for RCC works including false work using Non sal wood scantling, planks, sal bullah etc.including cost, conveyance, royalty of all material, dismantling the centering, shuttering work after the period as specified by the EIC and cost of all labour, T&P required for the work comp. in all respect.
745	Brick work with flyash bricks of size 25x12x8cm in cement mortar (1:6) with best quality bricks having crushing strength not less than 75 Kg/cm2 immersing the bricks in water for not less than 6 hours before use (the bricks shall be free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes molding, chamfering, corbelling .complete as per drawing, design and specification, watering and curing for 7days including cost, conveyance, royaltyof all materials, labour, T&P etc. and as per direction of Engineer in charge.
746	Providing 16mm thick cement plaster to the surface of external brick masonry wall with cement mortar (1:6) including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves and beads to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing, sundries and T&P etc all complete as per direction of the Engineer -in-charge
747	Filling recharge pit with 40mm CB HBG metalincluding cost of all materials, conveyance, all taxes and royalties, loading and unloading, including cost of all labour, all taxes, sundries ,T & P etc. complete as per directions of the Engineer -in-charge.
748	Filling recharge pit with 20mm CB HBGmetalincluding cost of all materials, conveyance, all taxes and royalties, loading and unloading, including cost of all labour, all taxes, sundries ,T & P etc. complete as per directions of the Engineer -in-charge.
749	BOREWELL AND SPRINKLER FACILITY
750	Providing & fitting fixing cast iron non return valve with double flange ends for water works purpose conforming to I.S: 2685-1971 for following rating & nominal diameter as per specification includingcost of all labours, materials, conveyance, loading and unloading, all taxes, sundries and T&P etc all complete as per direction of the Engineer -in-charge. 50 mm dia C.I D/F non return valve
751	Fixing of Brass or Gun Metal Full Way Valve conforming to IS:781-1995 of the following nominal sizes with wheel as per specification complete.includingcost of all labours, materials, conveyance, loading and unloading, sundries and T&P etc all complete as per direction of the Engineer -in-charge.50 mm dia
752	Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) forvalve, with SFRC surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design complete as per directions of the Engineer -in-charge.
753	Supplying all materials, labour, T&P and fitting & fixing 25mm dia single brass air valve with supply ofjointing materials completeas per specification and direction of the Engineer in charge. (Make:- Shakti / Leader)
754	Supply and fixing of 3HP (2.20kW), 3-Ph, 415V, vertical borewell submersible pumpsetof Head discharge of 55mtr (Min.) and 3.6 lps (Min.) respectively etc complete work as per direction of EIC.
755	Supply and fixing of 3-Ph, 415V DOL Submersibble pump starter with manual & Auto switch of 5 minute time delay option for coil voltage of range 380-440V, Overload relay range of 8.9-13.5Amp, Contactor rating 20A, Voltmeter, ammeter, On-Trip-Off indicator, Start & Stop button etc complete work as per direction of EIC.
756	50 mm dia H.D.P.E (PN-10) Riser pipe
757	4mm2 ,3 core flat copper cable for vertical submersible pump
758	50mm dia S.S nipple
759	50mm dia C.M.N.R.V
760	50mm dia G.I pipe (heavy)
761	BOREWELL(200x150 mm size )-2 Nos
762	Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rigs or combination drilling rigs (1200 cfm/ 300 psi) as required to suit the site condition as per the direction of Engineer-in-charge including use of own rigs with its accessories, tools and plant and consumables etc for lowering of 200 mm dia PVC/ GI pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (GI/ PVC casing pipes if required to prevent collapse of over burden is to be provided by the contractor including lowering and withdrawing after completion of the bore well). 200mm dia
763	Supplying, assembling, lowering and fixing in vertical position, unplasticized PVC casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories. materials, loading and unloading, sundries and T&P etc all complete as per direction of the Engineer -in-charge.150 mm nominal inner dia Pipes(SCH-80) Make ORIPLAST/ HARIPLAST/PLASTO
764	Supplying, assembling, lowering and fixing in vertical position, unplasticized PVC casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories. materials, loading and unloading, sundries and T&P etc all complete as per direction of the Engineer -in-charge.300 mm nominal inner dia Pipes(SCH-80) Make ORIPLAST/ HARIPLAST/PLASTO
765	Cleaning and developing the bore well using their own compressor continuously worked till clear and adequate discharge is obtained from the bore well including supply and use of all necessary equipment and labour as per the direction of Engineer-in-Charge.
766	Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell all as per requirement and direction of Engineer-in-charge.
767	Providing and fixing M.S. clamp of required dia to the top of casing/housing pipe of borewell as per IS: 2800 (part I), including necessary bolts & nuts of required size all complete for borewell all as per requirement and direction of Engineer-in-charge.
768	Supplying all materials, labour, tools and plant and providing sanitary sealing by cement concrete grouting of annular space around GI/ PVC/ MS housing pipe upto 5 mtrs below ground level (as per drawing) to plug the bore hole including cost of cement etcall complete as per direction of Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing.
769	Internal Electrical works
770	Recessed wiring to light point / first light of group control/ call bell point/ exhaust fan point /wall fan point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVCconduit with 6 Amp, 250 V clip in type switch ISI marked and ceiling rose ISI marked mounted on G.I modular box with face plate & cover of suitable size ,with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. (Length-5 Mtr.)
771	Recessed wiring to secondary light pointlooped from primary light point with 1.5sqmm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVCconduitwith 1.5sqmm FR PVC insulated single core multistrand copper conductor for running earth including3 plate ISI marked Ceiling rose with all accessories & connection as per direction of Engineer in charge.(Average Length of Looping : 3Mtr)
772	Supply & Recessed wiring to ceiling fan point with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVCconduit with 6Amp 250V Modular Switch,Stepped type Moudular Regulator, Base & Cover with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor for running earth including all accessories & connection as per direction of Engineer in charge.
773	Supply & Recessed wiringfor 6 Amp modular socket outletwith 6Amp, 250 V clip in type modular switch ISI markedmounted on G.I moular box with face plate & cover of suitable size with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection on same switch board as per direction of Engineer in Charge.
774	Supply & Recessed wiring to2 nos 6 Amp modular socket outlet with 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in recess 1.6 mm thick 20 mm dia non-metalic PVCconduit with modular type2 nos switch and 2 Nos. of modular socket ,6 module 18SWG modular GI box and earthing point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc. as required. including all accessories and connectionas per direction of EIC. (Length of Point-3 Mtr.)
775	Supply and fixing of 4module GI box with cover on surface or in recessincluding providing and fixing 5 pin 16 amps modular socket outlet and 16 amps modular type switch, connection, painting etc as required including all accessories and connectionas per direction of EIC.
776	Supply and Recessed wiring for projector/AC socket outletwith 16Amps modular socket with 16Amps modular control switch at nearest separate location connection, painting etc as required including all accessories and connectionas per direction of EIC.
777	Supply and Recessed wiringfor A.Csocket outletwith 20 amp SPN, industrial type socket outlet, with plug top and metal chained cover in sheet steel enclosure indusrial socket ,20A SP MCBincluding all accesories and connection as per direction of Engineer in Charge.
778	Recessed sub main wiring with 2 Nos. Single Core 1.5 mm2 FRLSCopper Wire for Phase and Neutral and 1 No. Single Core 1.5 mm2 FRLS Copper Wire for Earth Continuity Conductor in 1.6mm thick 20 mm dia PVCconduit pipeas per SLD complete with making good the damages caused as required and including all accessories and connectionas perDirection of Engineer-In-Charge.
779	Recessed sub main wiring with 2 Nos. Single Core 2.5 mm2 FRLSCopper Wire for Phase and Neutral and 1 No. Single Core 1.5 mm2 FRLS Copper Wire for Earth Continuity Conductor 1.6mm thick 20 mm dia PVC conduit pipeas per SLD complete with making good the damages caused as required and including all accessories and connectionas perDirection of Engineer-In-charge.
780	Recessed sub main wiring with 2 Nos. Single Core 4.0 mm2 FRLS Copper Wire for Phase and Neutral and 1 No. Single Core 2.5 mm2 FRLS Copper Wire for Earth Continuity Conductor 1.6mm thick 20 mm dia PVC conduit pipeas per SLD complete with making good the damages caused as required and including all accessories and connectionas perDirection of Engineer-In-charge.
781	Recessed sub main wiring with 2 Nos. Single Core 6.0 mm2 FRLS Copper Wire for Phase and Neutral and 1 No. Single Core 6 mm2 FRLS Copper Wire for Earth Continuity Conductor a1.6mm thick 20 mm dia PVC conduit pipeas per SLD complete with making good the damages caused as required and including all accessories and connectionas perDirection of Engineer-In-charge.
782	Recessed sub main wiring with 4 Nos. Single Core 6.0 mm2 FRLS Copper Wire for Phase and Neutral and 2 No. Single Core 4 mm2 FRLS Copper Wire for Earth Continuity Conductor in 1.6mm thick 32 mm dia PVC conduit pipeas per SLD complete with making good the damages caused as required and including all accessories and connectionas perDirection of Engineer-In-charge.
783	Recessed sub main wiring with 4 Nos. Single Core 10.0 mm2 FRLS Copper Wire for Phase and Neutral and 2 No. Single Core 6 mm2 FRLS Copper Wire for Earth Continuity Conductor in 1.6mm thick 40 mm dia PVC conduit pipeas per SLD complete with making good the damages caused as required and including all accessories and connectionas perDirection of Engineer-In-charge.
784	Recessed sub main wiring with 4 Nos. Single Core 16.0 mm2 FRLS Copper Wire for Phase and Neutral and 2 No. Single Core 10 mm2 FRLS Copper Wire for Earth Continuity Conductor in 1.6mm thick 50 mm dia PVC conduit pipeas per SLD complete with making good the damages caused as required and including all accessories and connectionas perDirection of Engineer-In-charge.
785	Supply, delivery, installation and testingof 4+12 way TPN MCB DB with glazed door (IP-43) complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB knobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required and as perDirection of Engineer-In-Charge. ( But with out MCB/ RCCB/ Isolator)
786	Supply, delivery, installation and testingof 4+18 way TPN MCB DB with glazed door (IP-43) complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB knobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required and as perDirection of Engineer-In-Charge. ( But with out MCB/ RCCB/ Isolator)
787	Supply, delivery, installation and testingof 4+24 way TPN MCB DB with glazed door (IP-43) complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB knobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required and as perDirection of Engineer-In-Charge. ( But with out MCB/ RCCB/ Isolator)
788	Supply, delivery, installation and testingof 4 way SPN DB with glazed door (IP-43) complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB knobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required and as perDirection of Engineer-In-Charge. ( But with out MCB/ RCCB/ Isolator)
789	Supply, delivery, installation and testingof 8 way SPN DB with glazed door (IP-43) complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB knobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required and as perDirection of Engineer-In-Charge. ( But with out MCB/ RCCB/ Isolator)
790	Supply and fixing of 6-32Amp rating 240 V C-Series Minature Circuit Breaker (MCB) having a sensitivity current up to 10kA in the existing MCB DB ISI marked complete with connection testing and commissioning etc as required and as perDirection of Engineer-In-Charge.
791	Supply and fixing of 25-40Amp rating 240 V DP Residual Current Breaker with Overcurrent protection (RCBO) having a sensitivity current up to 30mA in the existing MCB DB ISI marked complete with connection testing and commissioning etc as required and as perDirection of Engineer-In-Charge.
792	Supply and fixing of 32Amp rating 415 V 4P Residual Current Breaker with Overcurrent protection (RCBO) having a sensitivity current up to 100mA in the existing MCB DB ISI marked complete with connection testing and commissioning etc as required and as perDirection of Engineer-In-Charge.
793	Supply and fixing of 40Amp rating 415 V 4P Residual Current Breaker with Overcurrent protection (RCBO) having a sensitivity current up to 100mA in the existing MCB DB ISI marked complete with connection testing and commissioning etc as required and as perDirection of Engineer-In-Charge.
794	Supply of 3.5C, 300Sq mm PVC insulated and PVC seathed XLPE Aluminum cable of 1.1 KV grade as required and as perDirection of Engineer-In-Charge.
795	Supply of 3.5C, 95Sq mm PVC insulated and PVC seathed XLPE Aluminum cable of 1.1 KV grade as required and as perDirection of Engineer-In-Charge.
796	Supply of 3.5C, 50Sq mm PVC insulated and PVC seathed XLPE Aluminum cable of 1.1 KV grade as required and as perDirection of Engineer-In-Charge.
797	Supply of 3.5C, 25Sq mm PVC insulated and PVC seathed XLPE Aluminum cable of 1.1 KV grade as required
798	Supply of 4.0C, 16Sq mm PVC insulated and PVC seathed XLPE Aluminum cable of 1.1 KV grade as required and as perDirection of Engineer-In-Charge.
799	Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm direct in ground including excavation, sand cushing, protective covering and refilling the trench etc. as required and as perDirection of Engineer-In-Charge.
800	Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of size excedding 25 sq.mm but not exceeding 120 sq.mm direct in ground including excavation , sand cushioning, protective covering and refilling the trench etc. as required and as perDirection of Engineer-In-Charge.
801	Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of size excedding 120 sq.mm but not exceeding 400 sq.mm direct in ground including excavation , sand cushioning, protective covering and refilling the trench etc. as required and as perDirection of Engineer-In-Charge.
802	Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm direct in ground in the same trench in one tier horizontal formation including excavation , sand cushining protective covering and refilling the trench etc. as required and as perDirection of Engineer-In-Charge.
803	Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm direct in ground in the same trench in one tier horizontal formation including excavation , sand cushining protective covering and refilling the trench etc. as required and as perDirection of Engineer-In-Charge.
804	Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of size excedding 120 sq.mm but not exceeding 400 sq.mm direct in ground in the same trench in one tier horizontal formation including excavation , sand cushining protective covering and refilling the trench etc. as required and as perDirection of Engineer-In-Charge.
805	Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm direct in ground in the existing RCC/HUME/STONEWARE/METAL pipe as required and as perDirection of Engineer-In-Charge.
806	Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade ofsize exceeding 25 sq.mm but not exceeding 400 sq.mm in the existing RCC/HUME/STONEWARE/METAL pipe as required and as perDirection of Engineer-In-Charge.
807	Laying and fixing of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm on surface as required and as perDirection of Engineer-In-Charge.
808	Laying and fixing of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm on surface as required and as perDirection of Engineer-In-Charge.
809	Laying and fixing of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of size exceeding 120 sq.mm but not exceeding 400 sq.mm on surface as required and as perDirection of Engineer-In-Charge.
810	Supplying and making end termination with brass compression gland and aluminum lugs for 3.5C, 300Sq mm size of PVC insulated and PVC sheathed / XLPE aluminum cable of 1.1 KV as required and as perDirection of Engineer-In-Charge.
811	Supplying and making end termination with brass compression gland and aluminum lugs for 3.5C, 95Sq mm size of PVC insulated and PVC sheathed / XLPE aluminum cable of 1.1 KV as required and as perDirection of Engineer-In-Charge.
812	Supplying and making end termination with brass compression gland and aluminum lugs for 3.5C, 50Sq mm size of PVC insulated and PVC sheathed / XLPE aluminum cable of 1.1 KV as required and as perDirection of Engineer-In-Charge.
813	Supplying and making end termination with brass compression gland and aluminum lugs for 3.5C, 25Sq mm size of PVC insulated and PVC sheathed / XLPE aluminum cable of 1.1 KV as required and as perDirection of Engineer-In-Charge.
814	Supplying and making end termination with brass compression gland and aluminum lugs for 4.0C, 16Sq mm size of PVC insulated and PVC sheathed / XLPE aluminum cable of 1.1 KV as required and as perDirection of Engineer-In-Charge.
815	Supply, installation, testing & commissioning of floor mounting front operated front access extensible type cubicle Indoor panel totally enclosed, dust and vermin proof with IP-42/55 protection with hinged and lockable doors. CRCA sheets (16 SWG)including Busbars,interconnections, tinned copper crimping lugs, bonding to earth and painting suitable for use at 415 V, 3phase 4 wire 50 Hz system, and to withstand a fault level of 35 kAmp symmetrical for 1 sec at 415 V complete as per below specifications, as required as per direction of Engineer in Charge.: MAIN PANEL with 400A 4P MCCB (36kA) - 2 Nos(1 No. as Standby), 400Amp, 4P Changeover-1 No., 50kA 4 Module Type-I+II SPD- 1 No., 63Amp 4P SFU set with fuses-1 Set as incoming, 250A 4P MCCB (36kA) - 4 Nos, 100A 4P MCCB (36kA) - 4 Nos, 63A 4P MCCB (36kA) - 4 Nos, 40A 4P MCB (C-Curve) - 4 Nos, 32A 2P MCB (C-Curve) - 6 Nosas Outgoing and 3 Nos 500/5A CT, Multifunction Meter, R-Y-B Indication lamp with 3x6Amp SP MCB and 500A Aluminum Bus Bars. All switchboards shall have provision for entry of cables from the bottom as required. All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The bus bars shall be insulated with heat shrinkable sleeves.SMC/DMC shrouds and busbar supports shall be used.
816	Supply, installation, testing & commissioning of floor mounting front operated front access extensible type cubicle Indoor panel totally enclosed, dust and vermin proof with IP-42/55 protection with hinged and lockable doors. CRCA sheets (16 SWG)including Busbars,interconnections, tinned copper crimping lugs, bonding to earth and painting suitable for use at 415 V, 3phase 4 wire 50 Hz system, and to withstand a fault level of 35 kAmp symmetrical for 1 sec at 415 V complete as per below specifications, as required as per direction of Engineer in Charge.: FLOOR PANEL with 250A 4P MCCB (36kA) - 1 No as incoming40A 4P RCBO (30mA) - 2 Nos,63A 4P MCB (C-Curve) - 6 Nos, 32A 4P MCB (C-Curve) -3 Nos, 32A 2P MCB (C-Curve) - 3 Nosas Outgoing and 3 Nos 250/5A CT, Multifunction Meter, R-Y-B Indication lamp with 3x6Amp SP MCB and 250A Aluminum Bus Bars. All switchboards shall have provision for entry of cables from the bottom as required. All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The bus bars shall be insulated with heat shrinkable sleeves.SMC/DMC shrouds and busbar supports shall be used.
817	Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc (But wih out charcoal and salt) as required and as perDirection of Engineer-In-Charge.
818	Earthing with G.I. earth plate 600 mm x 600mm x 6 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc (But wih out charcoal and salt) as required and as perDirection of Engineer-In-Charge.
819	Supply and providing salt and charcoal extra for G.I or copper plate earth as required and as perDirection of Engineer-In-Charge.
820	Providing and fixing 25 mm x 5 mm Copper strip in 40 mm dia G.I. pipe from earth electrode as required and as perDirection of Engineer-In-Charge.
821	Supplying and laying 25 mm x 5 mm copper strip on surface or in recess for connection etc as required and as perDirection of Engineer-In-Charge.
822	Supplying and laying 25 mm x 6 mm G.I earth strip ISI marked at 0.5 meter below ground level as strip earth electrode including soldering etc. as required and as perDirection of Engineer-In-Charge.
823	Supplying and laying 25 mm x 5 mm G.I earth strip ISI marked on surface or in recess for connection etc as required and as perDirection of Engineer-In-Charge.
824	Providing and fixing of lightning conductor finial made of 25mm dia 300 mm long, copper tube,having single prong at top,with 85mm dia 3 mm thick copper base plate including holes etc. complete asrequired and as perDirection of Engineer-In-Charge.
825	Providing and fixing of copper tape 20 mm x 3 mm thick on parapet or surface of wall for lightning conductor complete as required and as perDirection of Engineer-In-Charge. (For horizontal run)
826	Providing and fixing of copper tape 20 mm x 3 mm thick on parapet or surface of wall for lightning conductor complete as required and as perDirection of Engineer-In-Charge. (For vertical run)
827	Providing and fixing of testing joint, made of 20 mm x 3 mm thick Copper strip, 125 long with 4 nos of G.I. bolts, check nuts and spring washer etc complete as required and as perDirection of Engineer-In-Charge.
828	Reveting, sweating and soldering of copper / G.I. tape ( with another copper / G.I. tape, base of the finial or any other metallic object) as required and as perDirection of Engineer-In-Charge.
829	Providing and laying of copper tape 32 mm x 6 mm from earth electrode directly in ground as required and as perDirection of Engineer-In-Charge.
830	Supply delivery, installation, testing & commissioning of recessed mounted indoor type 36 watt 2 \" x 2\"Square LED Luminaire fittings including all accessories, labour cost, T&P etc complete work as per Direction of EIC.
831	Supply delivery, installation, testing & commissioning of recessed mounted indoor type 15 wattRound LED Luminaire fittings including all accessories, labour cost, T&P etc complete work as per Direction of EIC.
832	Supplying, installation, testing and commissioningof 20watt 240 VOLTbatten type LED tube light complete fitting ISI marked including all accessories, labour cost, T&P etc complete work as per Direction of EIC.
833	Supplying, installation, testing and commissioning of 5 watt 240 VOLT Mirror LED light complete fitting ISI marked including all accessories, labour cost, T&P etc complete work as per Direction of EIC.
834	Supply,installation and testing of following 1200 MM Sweep of High Speed Energy Efficient BLDC Ceiling Fan complete with Fan Blades, Down Rod, Canopies & Capacitor etc.including supply of Sundry Materials, making connection from the suitable point outlet but excluding cost of Fan Regulator complete as required and as per theDirection of Engineer-In-Charge. (Extra down rod of higher length may be provided if required)
835	Supply, installation & testing of 150 MM Sweep metalic Exhaust Fan on Existing opening including loop connections and making good the damages caused complete as required and as per direction of Engineer-in-charge.
836	Recessed wiring to telephone pointwithclip in type modular telephone socket (RJ 11) ISI markedmounted on G.I modular box with face plate & cover of suitable size , including all accesories and connection as per direction of Engineer in Charge.
837	Recessed wiring to television point with clip in type modular television socket ISI markedmounted on G.I modular box with face plate & cover of suitable size , including all accesories and connection as per direction of Engineer in Charge.
838	Supplying and fixing of 16 / 18 SWG metal box of 200 mm x 150 mm x 60 mm deepon surface / recess with suitable size of phenolic laminated sheet cover in front including cutting the wall and making good the same in case of recessed conduit as required as per the direction of Engineer in Charge.
839	Supplying and fixing of 25mm PVC conduit along with accessories in recessed wiring including cutting the wall and making good the same in case of recessed conduit as required as per the direction of Engineer in Charge.
840	Supplying and drawing one pair, 0.5 sq.mm FRLSH PVC insulated coper conductor, unarmoured telephone cable in existing surface / recessedPVC conduit as required as per the direction of Engineer in Charge.
841	Supply and drawing of TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated shielded with fine tined copper braid & protected with FRLSH PVC sheath inexisting surface / recessed STEEL / PVC conduit as required as per the direction of Engineer in Charge.
842	Recessed wiring to LAN pointwithclip in type modular lan socket (RJ45) ISI markedmounted on G.I modular box with face plate & cover of suitable size , including all accesories and connection as per direction of Engineer in Charge.
843	Supplying and drawing UTP 4 pairLAN cat-6 cable in the existing surface / recessed PVC conduit as required as per the direction of Engineer in Charge.
844	Supply and installation of Rubber Mats 12mm thick of size 2000mm x 1000mm x 12 mm thick Electrical tested with test certificate including all accessories and connection as per direction of Engineer in Charge.
845	Supply and fixing of 4 fire buckets with angular fabricated stand to fix 4 buckets in each stand for Electrical fire protection as per standards of Electrical Inspectorate including all accessories and connection as per direction of Engineer in Charge.
846	Supply and fixing of Dry Powder Type 5 kg. Fire Extinguisher, complete with wall bracket, along with supply of all materials and labor for proper completion of work including all accessories and connection as per direction of Engineer in Charge.
847	Supply and fixing of shock treatment charts duly laminated along with separate colour single line diagram laminated, to be fixed in Electrical control panel room including all accessories and connection as per direction of Engineer in Charge.
848	Supply and handing over 11KV Tested Rubber hand gloves to be used on LT supply with Test certificate including all accessories and connection as per direction of Engineer in Charge.
849	Supply and fixing of 250 x 200mmDanger Notice Plate as per directions of Engineer-in-Charge including all accessories and connection as per direction of Engineer in Charge.

Also Visit

Tenders

Odisha Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Construction Of Building Infrastructure At Omc Colony, Rayagada In The District Of Rayagada., Rayagada-Odisha

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Construction Of Building Infrastructure At Omc Colony, Rayagada In The District Of Rayagada., Rayagada-Odisha

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us