Quotation For Supplying Different Item Of Works Regarding Installation Of 20 Hp Spv Ac Surface Pump, 10 H.P Spv And 5 H.P Spv Dc Surface Pump, latehar-Jharkhand

Notice Inviting E-Quotation Rate Through E-Quotations Are Invited For Material Category Annexed As 20 Hp Ac Solar Pump, 10Hp Dc Solar Pump And 5Hp Dc Solar Pump With Solar Panel Etc. - 1 Solar Module Mounting ( Galvanised Steel ) Surface Structure ( For 50 Kw Having Hot Deep Galvanised Of Zinc Thickness 80 Micron And As Per Is4759 With C Channel & Anti Theft With Nut Bolt Of Grade Ss304 Which Should Also Withstand High Wind Velocity Upto 150Km / Hr Or As Per Mnre. 1.00 Set 2 50 Kwp Spv Module Of 330Wp Or Higher Rating, Which Must Have Specification As Per Is 14286 / Iec 61215. The Module Must Have To Quality Is / Iec 61730 Part I & Ii ( Or Having Mechnical Load Test Of 5400Pa ) For Safety Purpose. Module To Module Wattage Mismatch In Spv Array Shall Be + / -3% And To Quality Iec Ts 62804- :2015 For The Detection Of Potential Included Degradation And Warranted Fro Output Wattage Not Less Than 90% In 10Yrs And 80% At The End Of 25Yrs As Per Mnre. 1.00 Set 3 Spv Controller / Vfd Integrated With Gprs, Having Mppt, Protection Ip 65 Or Above As Per Mnre To Run 20Hp Ac Solar Pump. 1.00 Nos. 4 Solar Cable 4Mm2 Used As Per Is 694 Or As Per Mnre. 1.00 M 5 Copper Cable 95Mm2 Used As Per Is 694 Or As Per Mnre. 1.00 M 6 Arrangement Of Lightening Arrestor Excluding For 50Kw & 3Nos. 20Hp Solar Pump. 1.00 Set 7 20 H.P A.C Solar Pump Set Of Having Performance With Respect To Total Head, Maximum Current, Capacity, Voltage Range Etc As Per Mnre Guidelines. 1.00 Nos. 8 Array Junction Box ( Ip 65 Or Above ) As Per Mnre For 50Kw Spv. 1.00 Set 9 Miscllaneous Accessories For Installation Of 20 H.P Solar Pump 1.00 Set 10 Supplying, Installation And Commissioning Charge 11 Maintenance For Atleast 5 Years Or As Per Mnre Guidelines For 50Kw Spv And 3Nos. 20Hp Ac Solar Pump With All Accessories. 1.00 Set 12 Solar Module Mounting ( Galvanised Steel ) Surface Structure ( For 50 Kw Having Hot Deep Galvanised Of Zinc Thickness 80 Micron And As Per Is4759 With C Channel & Anti Theft With Nut Bolt Of Grade Ss304 Which Should Also Withstand High Wind Velocity Upto 150Km / Hr Or As Per Mnre. 1.00 Set 13 50 Kwp Spv Module Of 330Wp Or Higher Rating, Which Must Have Specification As Per Is 14286 / Iec 61215. The Module Must Have To Quality Is / Iec 61730 Part I & Ii ( Or Having Mechnical Load Test Of 5400Pa ) For Safety Purpose. Module To Module Wattage Mismatch In Spv Array Shall Be + / -3% And To Quality Iec Ts 62804- :2015 For The Detection Of Potential Included Degradation And Warranted Fro Output Wattage Not Less Than 90% In 10Yrs And 80% At The End Of 25Yrs As Per Mnre. 1.00 Set 14 Spv Controller / Vfd Integrated With Gprs, Having Mppt, Protection Ip 65 Or Above As Per Mnre To Run 20Hp Ac Solar Pump. 1.00 Nos. 15 Solar Cable 4Mm2 Used As Per Is 694 Or As Per Mnre. 1.00 M 16 Copper Cable 25Mm2 Used As Per Is 694 Or As Per Mnre. 1.00 M 17 Arrangement Of Lightening Arrestor Excluding Earthing As Per Mnre For 50Kw Spv And 5Nos. 10Hp Solar Pump 1.00 Set 18 10 H.P D.C ( Pmsm / Bldc / Srm ) Solar Pump Set Of Having Performance With Respect To Total Head, Maximum Current, Capacity, Voltage Range Etc As Per Mnre Guidelines. 1.00 Nos. 19 Array Junction Box ( Ip 65 Or Above ) As Per Mnre For 50Kw Spv. 1.00 Set 20 Miscllaneous Accessories For Installation Of 10 H.P Solar Pump 1.00 Set For 10 Hp Spv Dc Surface Pump 21 Supplying, Installation And Commissioning Charge Of Module And Structure For 50Kw 1.00 Set 22 Maintenance For Atleast 5 Years Or As Per Mnre Guidelines For 50Kw Spv And 5Nos. 10Hp Solar Pump With All Accessories. 1.00 Set 23 Solar Module Mounting ( Galvanised Steel ) Surface Structure ( For 5 Kw ) Having Hot Deep Galvanised Of Zinc Thickness 80Micron And As Per Is4759 With C Channel $ Anti Theft With Nut Bolt Of Grade Ss304, Which Should Also Withstand High Wind Velocity Upto 150Km / Hr Or As Per Mnre. 1.000 Set 24 5 Kwp Spv Module Of 330Wp Or Higher Rating, Which Must Have Specification As Per Is 14286 / Iec 61215 .The Module Must Have To Quilify Is / Iec 61730 Part I $ Ii ( Or Having Mechanical Load Test Of 5400Pa ) For Safety Purpose.Module To Module Wattage Mismatch In Spv Array Shall Be + / -3% And To Qualify Iec Ts 62804-:2015 For The Detection Of Potential Induced Degradation And Warranted For Output Wattage Not Less Than 90% In 10Yrs And 80% At The End Of 25Yrs As Per Mnre. 1.000 Set 25 Spv Controller / Vfd Integrated With Gprs, Having Mppt , Protection Ip 65 Or Above As Per Mnre To Run 5 Hp Dc Solar Pump. 2.000 Nos 26 Solar Cable 4 Mm2 Used As Per Is 694 Or As Per Mnre. 50.000 M 27 Copper Cable 4 Mm2 3 Core Used As Per Is 694 Or As Per Mnre. 50.000 M 28 Arrangement Of Lightening Arrestor Excluding Earthing For 5 Kw & 2 Nos. 5 Hp Solar Pump 1.000 Set 29 5 H.P. D.C. Solar Pump Set Of Having Performance With Respect To Total Head, Maximum Current, Capacity, Voltage Range Etc As Per Mnre Guidelines. 2.000 Nos. 30 Array Junction Box ( Ip 65 Or Above ) As Per Mnre For 5 Kw Spv. 2.000 Set For 5 Hp Spv Dc Surface Pump 31 Miscllaneous Accessories For Installation Of 5 H.P. Solar Pump 2.000 Set 32 Supplying, Installation And Commissioning Charge Of Module And Structure For 5 Kw. 1.000 Set 33 Maintenance For Atleast 5 Years Or As Per Mnre Guidelines For 5 Kw Spv Module & 2 Nos. 5 Hp D.C. Solar Pump With All Accessories 1.000 Set

Refer document

Refer document

Refer document