Karnataka Power Corporation Limited has published Tender For Procurement Of Eot Crane Spares. Submission Date for this Tender is 20-02-2023. Screws Tenders in Karnataka. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Name |
| 1 | DC SPRING APPLIED BRAKE-06-11 DC spring loaded fail safe brake with mounitng flange, friction plate and rubber seal inclusive of all components, Type; 14.458, Size: 06, hub bore: 11, Normally ON, coil voltage: 190VDC, Make: EMCO |
| 2 | DC SPRING APPLIED BRAKE-06-12 |
| 3 | DC SPRING APPLIED BRAKE-06-14 |
| 4 | DC SPRING APPLIED BRAKE-08-11 DC spring loaded fail safe brake with mounitng flange, friction plate and rubber seal inclusive of all components, Type; 14.458, Size: 08, hub bore: 11, Normally ON, coil voltage: 190VDC, Make: EMCO |
| 5 | DC SPRING APPLIED BRAKE-08-12 |
| 6 | DC SPRING APPLIED BRAKE-08-14 DC spring loaded fail safe brake with mounitng flange, friction plate and rubber seal inclusive of all components, Type; 14.458, Size: 08, hub bore: 14, Normally ON, coil voltage: 190VDC, Make: EMCO |
| 7 | DC SPRING APPLIED BRAKE-08-24 |
| 8 | DC SPRING APPLIED BRAKE-10-11 |
| 9 | DC SPRING APPLIED BRAKE-10-12 |
| 10 | DC SPRING APPLIED BRAKE-10-14 |
| 11 | DC SPRING APPLIED BRAKE-10-24 |
| 12 | DC SPRING APPLIED BRAKE-12-24 |
| 13 | DC SPRING APPLIED BRAKE-12-28 |
| 14 | DC SPRING APPLIED BRAKE-14-20 |
| 15 | DC SPRING APPLIED BRAKE-14-24 |
| 16 | DC SPRING APPLIED BRAKE-14-28 DC spring loaded fail safe brake with mounitng flange, friction plate and rubber seal inclusive of all components, Type; 14.458, Size: 14, hub bore: 28, Normally ON, coil voltage: 190VDC, Make: EMCO |
| 17 | DC SPRING APPLIED BRAKE-14-34 |
| 18 | DC SPRING APPLIED BRAKE-16-28 |
| 19 | DC SPRING APPLIED BRAKE-16-32 |
| 20 | DC SPRING APPLIED BRAKE-16-34 |
| 21 | DC SPRING APPLIED BRAKE-16-38 |
| 22 | DC SPRING APPLIED BRAKE-18-30 |
| 23 | DC SPRING APPLIED BRAKE-18-40 |
| 24 | EOT CT LEVER SW U#1 |
| 25 | EOT LT LEVER SW U#2 |
| 26 | HOIST BRAKE MDT 250-18 |
| 27 | EOT LS U#2(LT,CT) |
| 28 | EOT LSU#2(UP/DOWN) |
| 29 | GRAVITY LIMIT SWITCH |
| 30 | INPUT CHOKE 0.5mh U#2 |
| 31 | AC DRIVE FOR MAIN HOIST |
| 32 | 30KW AC DRIVE FOR ENCODER CARD |
| 33 | AC DRIVE FOR CT |
| 34 | AC DRIVE FOR LT |
| 35 | DYNAMIC BRAKING RESISTOR |
| 36 | DYNAMIC BRAKING RESISTOR CT |
| 37 | DYNAMIC BRAKING RESISTOR LT |
| 38 | ANTI COLLISION DEVICE |
| 39 | DSL WMI |
| 40 | CENTRE POWER FEED WMI |
| 41 | END COVER WMI |
| 42 | CURRENT COLLECTOR 250A WMI CURRENT COLLECTOR RATING:250A MAKE: SAFETRACK |
| 43 | DOUBLE ACTING CC BRACKET |
| 44 | ISOLATION SELECTION |
| 45 | DSL PHASE INDICATOR |
| 46 | SS ON PENDANT MODE |
| 47 | FOOT SW EOT U#1 |
| 48 | EXTANSION JOINT DSL |
| 49 | EOT AUX HOIST LEVER SW U#1 |
| 50 | EOT MAIN HOIST LEVER SW U#1 |
| 51 | RESISTANCE BOX MH EOT U#1 |
| 52 | RESISTANCE BOX AH EOT U#1 |
| 53 | RESISTANCE BOX CT/LT EOT U#2 |
| 54 | STAR SCREWS 4X20MM |
| 55 | LINE CHOKE-CROSS TRAVEL |
| 56 | INPUT CHOKE 4MH |
| 57 | CRANE PENDANT-8WAY(ALLUMINIUM) Alluminium Pendant push button station box with actuator, contact element,gland,type:JAPBS 8W,8 way, Make:Jai Balaji |
| 58 | HANGER CLAMP |
| 59 | 125A D TYPE COLLECTOR |
| 60 | JOINTING TOOL |
| 61 | DSL END CAP |
| 62 | NYLON HANGER CLAMP |
| 63 | FOUR POLE HANGER CLAMP |
| 64 | HOIST PENDANT 6 WAY (METAL) |
| 65 | PENDANT 12 WAY(ALLMINIUM) |
| 66 | DRIVE FOR LONG TRAVEL |
| 67 | MH LIMIT SWITCH |
| 68 | CT /LT LIMIT SWITCH |
| 69 | U1 ESP HOIST MH LIMIT SWITCH |
| 70 | U1 ID FAN HOIST CT LIMITSWITCH |
| 71 | UNIT 1 ID FAN HOISTS MH LS |
| 72 | MH BRAKE ESP ROOF HOIST |
| 73 | U1 ID FAN HOIST CT BRAKE |
| 74 | INSULATED WIRE ROPE HOIST |
| 75 | MILL HOIST BRAKE |
| 76 | MILL HOIST BRAKE LINERS |
| 77 | CABLE TROLLY FOR MILL HOIST |
| 78 | MILL HOIST CT BRAKE |
| 79 | BRAKE RESISTOR FOR MH |
| 80 | BRAKE RESISTOR-CT & LT |
| 81 | INPUT LINE CHOKE FOR MH |
| 82 | INPUT LINE CHOKE - CT & LT |
| 83 | AC DRIVE FOR MAIN HOIST |
| 84 | AC DRIVE FOR CROSS TRAVEL |
| 85 | AC DRIVE FOR LONG TRAVEL |
| 86 | MILL HOIST BRAKE ASSEMBLY-2 |
| 87 | VFD FOR 180T/45T EOT-MH |
| 88 | VFD FOR 180T/45T EOT - AH |
| 89 | VFD FOR 180T/45T EOT- LT |
| 90 | VFD FOR 180T/45T EOT - CT |
| 91 | LIMIT SWITCH MH ROTARY MOTION |
| 92 | OVERLOAD RELAY 10-16A Bimetal Relay with single phasing protection for contactor mounting RANGE 10-16A, make:SIEMENS type :3UA5200-2A,MOUNTING SUITABLE FOR 3TF32/33 WITH 1C/O |
| 93 | OVERLOAD RELAY 16-25AMP |
| 94 | RADIO REMOTE CONTROL U#3 |
| 95 | LINE CHOKE 184A |
| 96 | BUS BAR FOR EOT CRANE (RED) |
| 97 | BUS BAR FOR EOT CRANE (YELLOW) |
| 98 | BUS BAR FOR EOT CRANE (BLUE) |
| 99 | BUS BAR FOR EOT CRANE (GREEN) |
| 100 | JOINT COVER FOR BUS BAR |
| 101 | CENTRE POWER FEED KIT 100A |
| 102 | HANGER CLAMPS |
| 103 | OLR RANGE 7.5-11A |
| 104 | CRANE CONTACTOR-6AMPS |
| 105 | CRANE CONTACTOR-25AMPS |
| 106 | CONTACTOR 18A 110VAC |
| 107 | PVC WIRE ROPE-5 PVC Insulated stranded steel wire rope, Dia:5mm |
| 108 | PVC WIRE ROPE-8 PVC Insulated stranded steel wire rope, Dia:8mm |
| 109 | C RAIL CHANNEL Heavy duty C rail channel for crane application, material; Galvanised Steel, Size: 36X36X2mm, Standard length: 10Mtrs, Load capacity; 100Kg/Mtr, Make:Any reputed make |
| 110 | HANGER CLAMP FOR C RAIL Hanger clamp for C rail, C rail size:36X36X2mm, Material: Galvanised Steel |
| 111 | CABLE TOWING TROLLEY Cable towing trolley sutiable for C rail of 36X36X2mm size, material: Galvanised steel, Steel roller with ball bearing wheels, saddle:80mm, Make: Any reputed make |
| 112 | WIRE ROPE CLAMP Carbon steel wire rope clamp, material: Galvanised steel, shape: D shaped, Size: suitable for 5 to 10mm wire rope, Make: Any reputed make |
| 113 | CHARGING HOOK-1 |
| 114 | EOT 15T MAIN HOIST MOTOR |
| 115 | EOT 15T LT/CT MOTOR |
| 116 | EOT 15T CREEP MAIN HOIST MTR |
| 117 | EOT 15T CREEP LT/CT MOTOR |
| 118 | EOT 15T SFU 200A |
| 119 | EOT 15T GEARED ROTARY LIMIT |
| 120 | EOT 15T THRUSTOR BRAKE 100DIA |
| 121 | EOT 15T THRUSTOR BRAKE 160DIA |
| 122 | EOT 15T THRUSTOR BRAKE 300DIA |
| 123 | EOT 15T LIGHTING TRF 2.5 KVA |
| 124 | EOT 15T CONTROL TRF 1.5 KVA |
| 125 | EOT 15T RESISTANCE BOX 1.7KW |
| 126 | EOT 15T RESISTANCE BOX 24.5KW |
| 127 | HANGER SUPPORT BRACKET |
| 128 | CURRENT COLLECTOR 125A |
| 129 | COMPACT SHORUDED CONDUCTOR |
| 130 | U#2 HOIST PENDANT |
| 131 | U2 ESP HOIST MH LIMIT SWITCH |
| 132 | MILL HOIST BRAKE ASSEMBLY-3 |
| 133 | HOIST BRAKE FOR 1T MH |
| 134 | HOIST BRAKE FOR 3T MH |
| 135 | HOIST BRAKE FOR 5T MH |
| 136 | HOIST BRAKE OF 110V |
| 137 | CABLE TROLLEY FOR EOT |
| 138 | MILL HOIST BRAKE DAT-05 |
| 139 | MILL HOIST BRAKE DAT-05 24V |
| 140 | VFD-A1000, 7.5KW YASKAWA |
| 141 | VFD A1000 FOR15KW |
| 142 | VFD A1000 ,7.5KW/5.5KW YASKAWA |
| 143 | VFD 5.5KW/3.7KW YASKAWA |
| 144 | DYNAMIC BRAKINGRESISTOR 15OHMS |
| 145 | DYNAMIC BRAKINGRESISTOR 28OHMS |
| 146 | DYNAMIC BRAKINGRESISTOR2.75OHM |
| 147 | BRAKE ECO RESISTANCE 159 OHMS |
| 148 | BRAKE ECO RESISTANCE 48 OHMS |
| 149 | ENCODER INTERFACE CARD |
| 150 | ENCODER OF 1024 PPR |
| 151 | ENCODER FOR MAIN HOIST |
| 152 | LIMIT SWITCH 2WAY |
| 153 | U3 IDFAN HOIST MH LIMITSWITCH |
| 154 | U3 IDFAN HOIST CT LIMITSWITCH |
| 155 | U3 ID FAN HOIST MH BRAKE |
| 156 | U3 ID FAN HOIST CT BRAKE |
| 157 | CONTROL PANEL MILL HOIST |
| 158 | CONTROL PANEL HOIST |
| 159 | CONTROL SMALL PANEL |
| 160 | THRUSTOR BREAK 68KG |
| 161 | THRUSTOR BREAK 34KG |
| 162 | THRUSTOR BREAK 18KG |
| 163 | ROTARY GEARED LIMIT SWITCH 2NC |
| 164 | ROTARY GEARED LIMIT SWITCH 4NC |
| 165 | COUNTER WEIGHT LIMIT SWITCH |
| 166 | Main Hoist VFD |
| 167 | Long travel VFD |
| 168 | Cross travel VFD |
| 169 | LINE CHOKE 222A |
| 170 | SOLID STATE RECTIFIER |
| 171 | RECTIFIER FOR HOIST BRAKE |
| 172 | HOIST BRAKE 1T |
| 173 | CT BRAKE 1T |
| 174 | HOIST BRAKE 2T |
| 175 | CT BRAKE 2T |
| 176 | HOIST BRAKE 4T |
| 177 | CT BRAKE 4T |
| 178 | HOIST BRAKE 5T |
| 179 | CT BRAKE 5T |
| 180 | HOIST BRAKE 15T |
| 181 | HOIST BRAKE LKG4.165 15T |
| 182 | CT BRAKE 15T |
| 183 | CT BRAKE LKGM 4.165 15T |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
