}

Tender For Supply Installation Testing And Commissioning Of Automatic Traffic Signals With Smart Traffic Signal Poles At Various Sq On Ring Road At Mangal Murti Square Under Zone No. 1 Laxminagar, nagpur-Maharashtra

Nagpur Municipal Corporation has published Tender For Supply Installation Testing And Commissioning Of Automatic Traffic Signals With Smart Traffic Signal Poles At Various Sq On Ring Road At Mangal Murti Square Under Zone No. 1 Laxminagar. Submission Date for this Tender is 07-02-2023. Traffic Signals Tenders in nagpur Maharashtra. Bidders can get complete Tender details and download the document.




Tender Notice

36023648
Tender For Supply Installation Testing And Commissioning Of Automatic Traffic Signals With Smart Traffic Signal Poles At Various Sq On Ring Road At Mangal Murti Square Under Zone No. 1 Laxminagar
Open Tender
Indian
Maharashtra
nagpur
07-02-2023

Tender Details

Tender For Supply Installation Testing And Commissioning Of Automatic Traffic Signals With Smart Traffic Signal Poles At Various Sq On Ring Road At Mangal Murti Square Under Zone No. 1 Laxminagar

Key Value

Document Fees
INR 590 /-
EMD
INR 26400.0 /-
Tender Value
Refer document

BOQ Items

Name of Work: SITC ofAutomatic Traffic Signals with Smart Traffic Signal Poles At various sqon Ring road at Mangal Murti square under zone no. 1 Laxminagar
Sl. No. Item Description
1Rates are exclusive GST
2Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.
3Supplying and laying (including excavation of suitable width & depth up to 90 cm) 75 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.
4Excavation of Hard or Bituminus road (BT)by chiselling for preparing pit for road laying cables/pipes & cleaning the site by removing debries & making the site good.
5Excavation of Hard Murum/metal road) forlaying cables/pipes & cleaning the site by removing debries & making the site good.
6Excavating soft murum / soft soil road by chiselling for preparing pit for poles stay or earth plates or for laying cables, pipes & clearing the site by removing debris & making the sitegood complete.
7Making cement concrete foundation in 1:3:6 cement concrete, (20 to 25) mm. stone metal duly plastered with necessary curing for complete. (pole muffing or any other purpose).
8Providing & erecting Pipe type earthing 25 mm dia 1.5 mtr long G.I. pipe by driving with double G.I. wire
9Providing& laying of multicore armoured insulated solid copper cable (Finolex/Polycab/Brimson make) in approved manner as per ISI :1554 of 1.5 sqmm.ISI mark a) 4 core cable
10e) Signal Cu. Cable 1.5 sq mm 20 core
11Supplying, erecting & marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification no. SW-SWR/MCB
12Providing, erecting and commissioning 2 pole RCCB only of electromagnetic type with 30/100/300 mA sensitivity and having capacity of 16/ 25A complete as per specification no. SW-RCCB/RCCB
13Providing & fixing of electric meter box with 16 Amp. Kitkat , neutral link, M/C or I/C DP main switch including all material with ISI mark & Labour etc. made of 16 SWG for meter box size 1.2X1X0.4 mtr.
14Providing signal balance time indicator consisting of 2 1/2 digit led display segment with super bright led
15Providing & replacing of 300 mm dia signal retrofit with clamp, visor, UV stabilized lenses wioth LED retrofitconsisting of high efficiency,high reliability,imported super brightness LEDs with light output brightness 256 cd with 10 watt.The operation voltage is 230 V AC (+/- 15 %) & work in the range of 180 V AC. to 270 V.AChaving operating temprature range of 0 to 50 degree celsius.It is having fuse transient voltage supressor & short circuit over voltage & water leakage protection etc. assembly with all material.a) Vehicular Red (Nos of LED 177 to 220)
16b) Vehicular Amber (Nos of LED 177 to 220)
17c) Vehicular Green arrow (Nos of LED 66 to 99)
18d) Pedestrain Red Stopman (Nos of LED 48 to 90)
19e) Pedestrain Green walkman (Nos of LED 48 to 90)
20f) Left arrow Amber ( Nos.of LED 66 to 99)
21Providing & erecting 300 mm dia Signal M.S. Lamp head complete assembly with all mounting clamp with mounting charges including all materials etc.(Iron work)
22Supply , erection & commissioning of Signal controller a) Adaptive Traffic Signal
23Providing & replacing Brick Masionary foundation for erection of control panel box
24Removing /Dismentling of existing signal pole with all accessories from 30 cm below ground levell and making the side clear by refilling the pits with excavated materials with transport to store a) Above 6 mtr height without using crane.
25Fabrication and supply of new type LED cantilever traffic signal pole of GI (ERW) rectangle pipe / Round pipe including following LED Modules fixtures,with control units, driver relays, Wires, cables including neceessary accessories as required.b) 6 Nos LED Module
26Installation & commissioning of above Cantilever pole with control units.b) 6 Nos LED Module
27Design & construcion of foundation to erect above Cantilever poles with control units b) 6 Nos LED Module
28providing & erectionof 100 mm inner dia ( G.I. pipe B class) pole including providing M.S. base plate of size 300mmX300mmX10 mm thick welded with bottom with all accessories.Erection of single pole on provided Octagonal pole foundation or with excavation of 60 Cms X 60 cmsX1. mtr deep pit below road level & foundation with 1:2:4 cc including providing & fixing G.I. junction box with ISI mark,painting to single pole & foundation with two coats of synthetic enamel paint of approved colour,FRP cap at top of pole with two coats of Zinc chromate primer,etc. assembly with all material,labour & taxes. a) 6 mtr long pole ( for single ,pedestrain & blinker )
29b) 3 mtr long pole ( For energy meter)
30Supplying, Installing, testing and commissioning of signal bollard of height 900mm feet suitable for broader lighting for pedestrian crossing with narrow beam through on the ground .the base section of the material shall be extruded Aluminium with pressure die cast housing single piece injection moulded PC diffuser for top lighting specially designed with 2 part light diffuser with wattage not less than 20 W IP 65. The pedestal bollard shall be sync with existing traffic signal for red and green illumination.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail