|
| 1 | SCHEDULE \"A\" PART-I : B/R PORTION |
| 2 | REPAIR AND REHABLITATION WORKM & L Drilling installing the 12mm dia holes about 100 mm to 200 mm deep (Nozzle spacing should be as per the methology \"Nozzle spacing\") on the member wall avoiding microfine cement location.Cleaning the holes with compressed air and spiral brush to make it free from drill dust.Fixing twin lock nozzles of 1mm outer dia ( to sutain pressure up to 10 Kg/cm2) in 12mm dia holes, with epoxy putty as directed.Note : (i)The work will be executed upto G+three stories bldgs and cost of necessary tool & tackles, scaffolding, labours etc is included in quoted rates . |
| 3 | INJECTION AND GROUTINGM & L for executing injection / pressure grouting in cracks in the parent concrete by fixing PVC nipples at 500mm distance or specified distances as per design and detailed specifications.Pressure grouting using low viscous epoxy grout shall be done at required pressure etc compete as per specification and approvals, labour, tools tackles, scaffolding, etc complete all as specified and as directed. Make: SIKA, BASF, Krishna conchem, Fosroc or equivalent approved by GE.Note : (i) Rate of Grouting materials is included in quoted rates and will be measured as per actual consumtion.(ii)The work will be executed upto G+three stories bldgs and cost of necessary tool & tackles, scaffolding, labours etc is included in quoted rates . |
| 4 | CORROSION INHABITAOR APPLICATION M&L for cleaning and preparation of concrete surface and applying one coat of migrating multifunctional corrosion inhibitor with suitable brush/roller and shall provide a coverage 12 kg per Cum for any type of concrete dosage as per test report of IIT Madras, 1 - 3% by weight of cementitious and W/C should be less than 0.4 depending on the surface conditions.Material density should be 1.04 kg/l @ 25 degree and compatible for use up to 70 degree surface/ ambient temperature complete all as specified and as directed. Make: SIKA, BASF, Krishna conchem, Fosroc or equivalent approved by GE.Note : (i)The work will be executed upto G+three stories bldgs and cost of necessary tool & tackles, scaffolding, labours etc is included in quoted rates . |
| 5 | Rust Removal : M&L for Cleaning of rust/ scales/ corrosion from reinforcement bars using rust remover.The material to be applied to the rusted metal using brush and make leaving to dry for 30 mins & washing surface with fresh water as required to exposed reinforcement bars complete all as specified and as directed.Make: SIKA ,BASF, Krishna conchem, Fosroc or equivalentNote : (i)The work will be executed upto G+three stories bldgs and cost of necessary tool & tackles, scaffolding, labours etc is included in quoted rates . |
| 6 | Anti Corrosive treatment to Steel:M & L inhibition coats/system to exposed reinforcement bars after cleaning & removing scales and rust completely as per manufacturer\"s specification in two coats including all labours, tools and machineries, plants, scaffolding, necessary surface preparation and necessary protection after and during work complete all as specified and as directed. Make:Make: SIKA, BASF, Krishna conchem, Fosroc or equivalent approved by GE.Note : (i)The work will be executed upto G+three stories bldgs and cost of necessary tool & tackles, scaffolding etc is included in quoted rates . |
| 7 | Epoxy bond coat : M & L boand coat on the prepared surface to receive new polymer mortar/ polymer modified concrete, with two components epoxy based bonding coat in one full coat. Laying of reinforcement polymer mortar or micro concrete shall be completed withing the overlay time of bonding coat.This coat act as bonding agent between old and new concrete and also acts as \"barrier coat\" to the migration of chloride ions from host concrete complete all as specified and as directed.Make :Make: SIKA, BASF, Krishna conchem, Fosroc or equivalent approved by GE.Note : (i)The work will be executed upto G+three stories bldgs and cost of necessary tool & tackles, scaffolding etc is included in quoted rates . |
| 8 | Polymer Modified Mortar (Pre-Packed):M & L singl component, dual shrinkage cmpensated,ready mixed high strength thixotropic repair mortar(up to 50mm) as per specification for covering the damaged structural member and reinforcement in desired layer and thicknesscomplete all as specified and as directed.Make: SIKA, BASF, Krishna conchem, Fosroc or equivalent approved by GE.Note : (i)The work will be executed upto G+three stories bldgs and cost of necessary tool & tackles, scaffolding etc is included in quoted rates . |
| 9 | Repair of cracks in masonry wall by cement grouting:M & L injection/pressure grouting in cracks in the parent concreteby fixing PVC nipples at 150mm to 200mm distance or specified distance as per design and detailed specifications.Pressure grouting using polymer cement grout as per detail specification shall be done at required pressure etc.complete as per specification complete all as specified and as directed.Make : SIKA, BASF, Krishna conchem, Fosroc or equivalent approved by GE.Note : (i) Reinforcement andstructural membersshall be measured and paid separately as per actual consumption.(ii) The cost of providing, erecting and maintaining leak-proof shuttering/formwork/scaffolding etc.to be used for the purpose,providing and erecting props, temporary frame worketc is included in quoted rates. (iii)The work will be executed upto G+three stories bldgs. |
| 10 | Demolition of reinforcement cement concrete slab and samilar suspended works complete all as specified and directed. |
| 11 | M&L RCC Type B1 1:2:4 (using 20mm graded stone aggregate) as in slab supported on walls, beams, columns in floors, deck slabs and in shelves etc complete all as specified and as directed |
| 12 | M&L Formwork to soffits of suspende slabs such as roof slabs, floor slabs, landings and similar work n exc 200mm thick, horizontal or sloping, for rough finished surfaces complete all as specified and directed, |
| 13 | Form work to edges of concrete flat, treads, breaks in floors, window cills, concrete railings, openings in concrere walls, floors and roofs not exceedings 20cm wide and sides of RCC/PCC bands in walls, horizontal or slopping and similar work exc 10cm but not exc 20cm wide(rough finished surface of concrete) complete all as specified and directed, |
| 14 | M&L Mild steel TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and directed, |
| 15 | M&L Mild steel TMT bars 6mm to 8mm dia,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips qualitycomplete all as specified and directed, |
| 16 | Dismanteling of single layer Mangalore pattern or similar works complete all as specified and directed. |
| 17 | Dismanteling of timber scanteling 40 sqcm and above section in any position and any descriprion complete all as specified and directed. |
| 18 | Dismanteling of timber fillets,rails,posts, rafter,purlins et under 40 sqcmsection in any position and any descriprion complete all as specified and directed. |
| 19 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having Tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismanteling of existing roof covering complete all as specified and as directed. |
| 20 | S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having Tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismanteling of existing sheet/covering complete all as specified and as directed. |
| 21 | Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410-W(Gde-E- 250)complete all as specified and as directed. |
| 22 | Material and labour forapplying two coats of synthetic enamel paint over a coat ofred oxide inc chrome including preparation of new steel surfaces any description exc 10cm width or girth complete all as specified and directed. |
| 23 | M & LPreparation of new steel surfaces ofMS flat ironwidth or girth not exc 10 cm and priming with red oxide primer and painting with synthetic enamel painting two coats complete all as specified and directed. |
| 24 | Taking down cement plaster of any description on brick or stone walls including racking ouit joint hacking for key, scrubbing down with water etc.complete all as specified and directed. |
| 25 | M&L for Rendering in 15 mm thick on fair faces of brick work in layers, first layer 10 mm thick in cm 1:6 and second finishing coat 5 mm thick in cm 1:4 mixed with water proofing compound as per manufacturers instructions and finished even and fair on external surfaces. Note : WPC shall be measured and paid separately. |
| 26 | M & L rendering 5mm thick on ceiling surface in cement mortar 1:3 finished fair and even smooth without using extra cement complete all as specified |
| 27 | M & L rendering 10mm thick on brick wall or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified. |
| 28 | M&L for applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gms/litre and UV resistance as per IS15489:2004., alkali & fungal resistance dirt resistance exterior paint of required shade (company Depot tinted) with silicon additives @ 1.43 litre/10sqm over and including priming coat of exterior primer applied @ 0.90litre/10sqm over new surface complete all as specified. |
| 29 | Supplying only Integral waterproofing compound |
| 30 | Applying white wash of 3 coats as in ceiling incl preparation of newly plastered surfaces as specified and directed. |
| 31 | M&Ltwo coats of distemper oil emulsion over a coat of alkali-resistant priming paint on new plastered walls surfaces Including 2 mm thick plaster of paris putty onnew plastered surfaces walls complete all as specified and as directed. |
| 32 | M&L for complete removal of existing treatment, washing, rubbing down and stopping of distempered surfaces and applying two coats of distemper oil emulsion over a coat of alkali-resistant priming paint on old plastered walls. Including applying plaster of paris putty of 2mm thick over plastered surface of wall all as specified. |
| 33 | Applying one coat of white wash as in ceiling incl preparation of old decorated surfaces as specified and directed. |
| 34 | Applying two coat of cement base paint on old wall surface including preparation of surface as specified and directed. |
| 35 | Dismantling floor, hearth or wall tiling including CM, bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and directed. |
| 36 | M&L for PCC 1:2:4 type B0 using 20 mm graded aggregate ,25mm thick as in leveling sub base complete all as specified and directed. |
| 37 | M&L for Vitrified darkshade ceramic tiles 10mm thick (square / Rectangle) polished, area of each tiles n.exc.0.36sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including a screed bed or bedding layerof mortar 15 mm thick CM (1:6) for laying floor finishes complete all as specified and directed. |
| 38 | Ditto above item noon vertical surfaces such as skirting, dados and risers to step etc incl rendering 10 mm cement mortar (1:4) as in backing coat complete all as specified and directed. |
| 39 | M &LNon -skidcoloured ceramictiles7 mm to 8 mm (Square/rectangular) area of eachtilesexceeding 0.11 sqm but not exceeding0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in CM 1:6 for laying floor finishes complete all as specified and directed. |
| 40 | Ditto above item noon vertical surfaces such as skirting, dados and risers to step etc incl rendering 10 mm cement mortar (1:4) as in backing coat complete all as specified and directed. |
| 41 | S&F Coloured Glazed ceramic tiles in vertical surfaces600x300x7-8mm thickwith highliter concept, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick plaster in CM 1: on fair face of brick or concrete surface as in backing coat omplete all as specified and directed. |
| 42 | Demolition of stone slab and tiles of any description or thickness in floors, aprons etc (laid, bedded and pointed in any mortar) all as specified. |
| 43 | M&L machine cut Kota stone slab 18-25 mm as in flooring etc laid over cement screed bed jointed with grey cement slurry mixed with pigment to match the shade the slab with rubbing and polishing upto mirror finished including20mm thick screed bed or bedding layer of cement mortar (1:6)for laying floor finishes complete all as speicifed and directed. |
| 44 | M&L machine cut Kota stone slab 18-25 mm as in riser of steps,skirting ,dado and window cill etc laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shadeincluding rubbing and polishing upto mirror finished including rendering 15mm thickCM (1:4) on fair faces of stone masonry wall surfaces, finished even and fair as in backing coate to receive wall finishes complete all as specified and directed. |
| 45 | M&L marble work (Black Granite) 18-20mm thick (table rubbed or polished) as in cooking platforms, window cills, jambs, pillars etc with and incl cement mortar 1:4 incl pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of marble with rounding/moulding edge and making holes etc for gas pipe including20mm thick screed bed or bedding layer of cement mortar (1:6)complete all as speicifed and directed. |
| 46 | Taking down Chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) complete all as specified and as directed |
| 47 | S&F 2nd class Hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered,put together with glue pinned at junctions complete all as specified and as directed |
| 48 | S&F Factory made Plain, framed, panelled shutters (any number of panels), 35mm with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and as directed |
| 49 | S&Ffactory made second class Hard wood, 30 mm thick,glazed skelton shutter, open rivetted & prepared, with sash bar, divided into square with plane chamfered or rounded, mitred and rivetted sash bars any numbers complete all as specified and as directed |
| 50 | M&L for preparation of new surface of wood or wood based material over 10 mm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified. |
| 51 | S&F in repair stainless steel wire mesh 0.36mm nominal dia of wire and avg width of aperture 1.4mm cut to size and fixed to doors/window shutters and fixed with aluminium wire staples including20mm thick screed bed or bedding layer of cement mortar (1:6)for laying floor finishes complete all as speicifed and directed. |
| 52 | Cutting holes in brick walls built in cement mortar for inserting hold fast etc depth of embedded portion of hold fasts exc half brick but n exc one brick thick wall and making good to the dismantled portion in cement mortar 1:3 and providing cement concret 1:2:4 type B1 for concreting of hold fastscomplete all as speicifed and directed. |
| 53 | M&L for preparing surfaces of wood and wood based material, treating ends of posts, backs of chowkats, etc., area tarred exc 0.1 sq.m but n.exc 0.5 sqm each. complete all as speicifed and directed. |
| 54 | M&L for preparing surfaces of steel surfaces, treating small articles such as stop, covers, gully gratings, holdfasts, end of posts, backs of chowkats, etc., area n. exc 0.1 sqm each complete all as speicifed and directed.. |
| 55 | S&F stainless steel Butt hinge 100mm size complete. |
| 56 | S&F extruded aluminium alloy, fabricated type handle, powder coated 150mm long complete. |
| 57 | S&F aluminiumhandlescast typeanodised 150 mm size. |
| 58 | S& F aluminium alloy, anodised sliding door bolts 300mm long with hasp and stable (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections as specified and as directed. |
| 59 | S & Fmild steel 300 mm , ordinary rat rail rod pattern springs including rollar and rollar plate complete. |
| 60 | S&F 140mm long Floor door stopper of aluminium alloy body & tongue, anodised, with hard drawn steel spring. |
| 61 | S & F Cast Aluminium (Die cast ) body door closer hydraulically regulated, designation No.2 univrsal type, suitable for door shutters up to 701mm to 850 mmin width and of weightbetween 36 to 60 kg. |
| 62 | Dismantling boarding, any description any position if fixed with screwscomplete all as specified and directed |
| 63 | M&Lfor 15 to 18 mm thick both side plainwooden grain solid PVC sheet suitably fixedin shelves, partition and shelves of built in cupboard almirahs book cases, toilet, boxes , racks, pelmet and similar work including all hardware fittings with dismanteling of exiting simiar article any description complete all as specified and as directed complete all as specified and as directed. |
| 64 | M&Lfor 15 to 18 mm thick one side plainwooden grain solid PVC sheet suitably fixedin shelves, partition and shelves of built in cupboard almirahs book cases, toilet, boxes , racks, pelmet and similar work including all hardware fittings with dismanteling of exiting simiar article any description complete all as specified and as directed complete all as specified and as directed. |
| 65 | M& Lfor 18/19 mm thick prelaminated particle board interior gradeprelaminated one side with decorative chioce lamination and other side balancing white lamination fixed with screws to timber frame work including dismantling of boards all as specified and dircted. |
| 66 | M&L for 6mm thick external teak wood lipping over particle board fixed with nails complete all as specified and as directed. |
| 67 | S&F contineous (piano) hinges mild steel, bright finish or electro galvanised width of flaps (when open) 30mm |
| 68 | Supply and Fix Locks, drawer, cupboard shutters grade I, size 75 mmBrass (2 levers) complete all as specified and directed. |
| 69 | M&L 40 mm brassdia cuboard knobs fixed withnuts ,screws and washers of mild steel, bright finished |
| 70 | S&FIn repair Size of Hasp and staple of 125mm, alluminium anodised wire type stove enemalled black including bolt to hinges plate and fixed with screws all as specified. |
| 71 | M&L for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook & pintel hinges; largehasps & staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way & three way straps,plate washers & similar small articles conforming to Fe290-0 Gde E-165. |
| 72 | M & L Aluminium designer curtain rods (Draw berms rod) exteriorgrade 3 mm thick with holding clambs and fixed to wall PVC rawel plug and brass screws all as specified and as diredcted including dismantling of existing one of any description. |
| 73 | M & LAluminium designer curtain rod brackets suitable for above complete |
| 74 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills, sunshades, shelves lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth in stone concrete block or slab walls complete all as specified and directed. |
| 75 | Taking up or down steel water tubing 15mm bore and connections, including cleaning for re-fixingcomplete all as specified and directed. |
| 76 | All as in item No. 74 above, but 20mm bore pipe. |
| 77 | Supplying & laying CPVC water tubing outer dia 20mm, SDR-11 grade with all fittings and fixed complete to walls and ceiling or laid in floorscomplete all as specified and directed. |
| 78 | All as in item No. 80 above, but 25mm bore pipe. |
| 79 | S&F 1000 Ltr tripple layer rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top) hoisted and fixed in position inclding dismanteling of unsv water storage tank etc complete all as specified |
| 80 | S&F 20mm dia brass ball valvehigh pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed as directed Engr- in -Charge. |
| 81 | S&F20mm bore brass Unionto connect iron to polyethylene tank complete fixed as directed by Engr- in -Charge |
| 82 | M & LGun metal globe or gate valve with iron wheel head screwd both ends for iron pipe and fixed for 25 mm dia bore pipes and fixed in repair all as specified and directed. |
| 83 | S&F gate valve PTMT, screwed down, high pressure with crutch or butterfly handle, screwed both ends for cPVC pipes 20mm bore. |
| 84 | S & F 15mm Bib taps, fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron/cPVCpipe or for brass ferrule and fixed complete all as specified and as directed |
| 85 | S & F 15mm, fancy type CP, Pillar taps, with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed |
| 86 | S&F in repairs 15mm bore CP Angle stop valve cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron/ccpvc pipe or for union complete all as specified and directed. |
| 87 | S&F PVC connections, 600mm long with brass CP/PTMT nuts suitable for connecting 15mm bore pipes, superior quality fixed in repairs complete all as specified and directed. |
| 88 | S&F CP shower roses 125mm size, with or without swivel joint including fixing to steel pipe, fixed in repaircomplete all as specified and directed. |
| 89 | S& F Brass chromium plated stainless steel towel rail, 20 mm dia \"D\" type,60 mm long between flanges and fixed in repairs. |
| 90 | S & F in repairs vitreous china wash basin, white, flat back, size 550x400mm excluding ditto but including brackets including cutting for and pinning in ends of brackets or erecting stand including Supply and fixing of waste pipe complete all as specified and as directed |
| 91 | S & F in repairs Vitreous China wash down water closet pan (pedestal pattern), white ( excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and as directed |
| 92 | S&F in repair 10 Ltr capacity PVC low level cistern “white” with inlet float valve including bracket with 32 mm dia PVC pipe 600 mm long, complete all as specified and directed. |
| 93 | S & F Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed |
| 94 | S&F 600mm x 450mm looking mirror, bevelled edge, of selected quality glass, mounted on PTMT frame of overall size incl mirror 600mm x600mm of make prayag or equivalent and fixed to wooden plugs with chromium plated brass screws and cup washerscomplete all as specified and as directed |
| 95 | S & F In repair Towel ring offixed with and including chromium plated brass screws and wooden/ plastic cleats (minimum weight 90 Gms)complete all as specified and as directed |
| 96 | S & F in repaairHealth faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 97 | S&F grating dome 125mm dia with or without waste holes of PTMT Min wt 140 gms complete all as specified and directed. |
| 98 | S&F in repair kitchen sinks with drainage boards made of stainless steel 1mm thick with plugs, washers & wastes, including in cement mortar to dwarf wall or incl fixing cantilever brackets and connecting union to pipes over all size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed. |
| 99 | M&L waste fitting (PTMT) for glazed ware sinks, basins etc half or full threaded with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed for 32mm bore complete all as specified and directed. |
| 100 | Taking down PVC (SWR) pipes 75/110 mm bore from walls including fittings complete all as specified and as directed |
| 101 | M&L PVC (SWR) pipe, 75mm bore, single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed |
| 102 | S&F PVC (SWR) 110mm bore \"-ditto- as above. |
| 103 | S/F PVC (SWR) bends 75mm bore any radius dismantling pieces or tapers complete all as specified and as directed |
| 104 | All as in item No.94 above but 110mm bore |
| 105 | S&F PVC (SWR) branch piece, single, (Single Y) equal or unequal with access door, for 75 mm bore pipes. |
| 106 | S&F PVC (SWR) branch piece, single, (Single Y) equal or unequal with access door, for 110mm bore pipes. |
| 107 | S&F 110 mm dia PVC (SWR) vent cowl. |
| 108 | M&LNahani traps CI 75mm dia with grating including jointing to waste pipe, fixed in cement concrete type B1 (1:2:4) complete all as specified and as directed |
| 109 | S&F PVC (SWR) floor trap 125/110 mm, setting and jointing with solvent cement omplete all as specified and directed. |
| 110 | S&F low density polythene (LDPE) pipes of pressure rating 6kg/sqcm of 32mm bore complete all as specified and directed. |
| 111 | Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed |
| 112 | M&L 75 mm thick cement concrete 1:3:6 type C2 using 40mm graded stone aggregate, finishing the surface even and fair as in plinth protections complete all as specified and as directed |
| 113 | Schedule \"\" Part I - E/M portion (Internal Electrfication) |
| 114 | Taking down UNSV aluminium point wiring (light, fan, socket or power ) complete including fittings and fixtures such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing materials for taking credit (credit for above items should be made as per conditions seperately)and making good the disturbed complete all as specified and directed . |
| 115 | Taking down UNSVsubmain wiring Aluminium/ copper of any size/core/type including earth continuity condutor on teak wood or conduit and removing the materialss/debris from site and making good the disturbed surfaces of wall etc to match with the original existing finish all as directed. |
| 116 | Taking down unserviceable existingTPN DB SPN/LT pannel/Meter Box with 100 Amp of any capacity and size and removing from site and making good the disturbed surface of wall etc complete all as specified and as directed. |
| 117 | Taking down unserviceable existingDB SPN 8/10/12 way of any capacity and size and removing from site and making good the disturbed surface of wall etc complete all as specified and as directed. |
| 118 | M&L Point wiring complete with 1100volt grade PVC insulated unsheathed multistranded 1.5 sqmm copper conductor cable confirming to IS 694 FRLS drawn through and including rigid PVC casing and capping medium grade of size 25/20 mm, etcfixed on wall/ceiling including provision of 1.5 sqmm PVC unsheathed copper conductor as earth conductor and connected to earth dolly, including provision of pressed steel terminal box with 3mm thick plastic laminated sheet top cover for housing switches,sockets etc concealed on wallcomplete all as specified and directed. |
| 119 | a.One light pointcontrolled by one switch |
| 120 | b.One fan/ exhaust fan point controlled by one switch and regulator |
| 121 | c. One 3 pin socket, 5 Amps on the same board, with cables 1.5 sq. mm size |
| 122 | d. One 3 pin socket outlet, 5 Amps, independent, with cables 1.5 sq. mm size |
| 123 | e.One light pointcontrolled by two 2-way switches, with cables 1.5 sqmm. |
| 124 | f. One call bell controlled by one push button on the same board with other switches or independent with cables 1.5 sqmm |
| 125 | M&L for point wiring complete with FRLS 1100 Volts grade, two runs of 2.5 sqmm coppercable through PVC casing and capping with one run of 2.5 sqmm PVC insulated and unsheathed multistranded copper conductor cable as earth continuity wire connected to common earth dolly complete all as specified and directed |
| 126 | S&Fswitchpiano type single pole 6 Amps one way all as specified and directed. |
| 127 | S&F Paino type switch two way 230 volt 50 HZ AC supply all as specified and directed. |
| 128 | S&F modular swtich socket combination 3 pin, 6Amps 2 flush universal all as specified and directed. |
| 129 | S&Fmodular Switch socket outlet multipurposed 3 pin, 16 Amp and 1 pin 6 Amp controlled by on switch 3 module complete all as specified and directed. |
| 130 | S&F Bell push 6Amp,modular type 230 volts, 50 HZ ,AC supply 01 module complete all as specified and directed. |
| 131 | S&F white modular cover plate with frame of 01 module complete all as specified and directed. |
| 132 | S&F white modular cover plate with frame of 2 module complete all as specified and directed. |
| 133 | S&F white modular cover plate with frame of 03 module complete all as specified and directed. |
| 134 | S&F white modular cover plate with frame of 04 module complete all as specified and directed. |
| 135 | S&F white modular cover plate with fram of 06 module complete all as specified and directed. |
| 136 | S&F white modular metal flush box 1/2 module complete all as specified and directed. |
| 137 | S&F white modular metal flush box 3 module complete all as specified and directed. |
| 138 | S&F white modular metal flush box 4 module complete all as specified and directed. |
| 139 | S&F white modular metal flush box 6 module complete all as specified and directed. |
| 140 | S&F Ding dongBell, AC, 230 volts, single pole 50 HZ AC supplyall as specified and directed. |
| 141 | S&F ceiling rose three terminal 230 volt 50 HZ AC supply all as specified and directed. |
| 142 | M&L for submain wiring complete with 1100volt grade PVC insulated unsheathed multistranded cable with 1100volt grade PVC insulated unsheathed multistranded 02 run of 06 sqmm copper conductor cable confirming to IS 694 FRLS drawn through and including rigid PVC Conduit in Ivory/Grey/white colour medium grade etc fixed on wall/ceiling including provision of 01 run of 6.0 sqmm PVC unsheathed copper conductor and Connected to earth dollycomplete all as specified and as directed. Note :02 run of 06 sqmm and 01 run of 6.0 sqm including 01 run of PVC CONDUIT will be measured as one length.complete all as specified and directed. |
| 143 | Supply and fixMCB DB, single pole and neutral with suitablerated busbar double door, 12 way 230 volt 50 HZ AC Supply complete all as specified and directed. |
| 144 | S&F MCB SP 06 to 32 Amp 230 volts,50Hz,BreakingCapacity 10 KA complete all as specified and directed |
| 145 | M&Lfor RCCBDouble pole, 30mA 25 Amps 230V 50Hz ACcomplete all as specified and as directed. |
| 146 | Supply and installation ,testing and commissioning of factory made LT panel wall mounted made of CRCS sheet of 2 mm thick indoor type doubble dooor compartmentalised construction totally enclosed weather ,dust and vermin proof with fron opening hinged door locking arrangement 415 bolt 3 phase 4 wire AC 50 Hz having aluminium busbar for phases and the netural insulated with PVC sleeves,suitable chamber for fixing single phase electric meter -5 Nos completeand epoxy powder coat of spray paint over a coat of red oxide primer complete all as specified and directed.INCOMING : (a) Including MCCB 415 volts 4 pole 36KVA capacity fixed magnetic setting type of 200Amp- 01 Nos (b)R-Y-B phsase LED indicating Lamp- 03 Nos(c)200 Amp TPN main aluminium busbarOUTGOING : (a) Including MCBSP & N 32 Amp breaking capacity 10KVA \"C\" curve - 05 Nos(b) Space moulding single phase energy meter - 0 Nos(c) Copper flexible wires of 06 sqcm size for all feeders/meter -05 Nos |
| 147 | S & F Integrated inverter LED battern T5tube light fitting type 1x 20 wattindoor type decorative aluminium extruded type complete with lithium ion battery with charging time 8 to10 hours and backup time upto 4 hours includingall accesories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed |
| 148 | S & FLED light fitting 1x18W,220V,decorative type with driver holder and LED tubelight connecting up with three core flexible copper conductor cable of suitable size form ceiling rose complete all as specified and directed. |
| 149 | S & FLED light fitting mirror typewith high output diffuser 2 feet ,10watts,220Volts AC deocative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size form ceiling rose complete all as specified and directed. |
| 150 | S&Fdeluxe stepped type electronic fan regulator flush type on the phenoliclaminatedsheetcomplete all as specified and as directed, |
| 151 | S&F round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free ligh complete with drivers,holders LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed, |
| 152 | S&F lamp holder, PVC/polycarbonated type with back plate suitable for batten fitting complete all as specified. |
| 153 | M&L Earthing complete with galvanised steel earth plate electrode of size 60cmx60cmx6mm thick ,burried directly in found vertically earth pit not less than 2025 Mtr deep below the ground level with top edge of the plate n less than 1.50 mtr below gorund level connected to galvanised earth wire 4mm dia by means of bolts,nuts ,check,nut washer of galvanised steel,including necessary earth work and excavation in any strata and PCC 1:3:6 type C2chamber and RCC cover and light grad GI pipe 15 mm dia pipe of required length for protection of GI wireand water funnel and wire mesh with GI pipemedium grade 20mmdia etc complete all as per electrical plate No 3 of SSR Part-I and all direced inlcuding connections and testing on completion .NOTE : If desired earthing result not achieved the earthing will be redone by contractor without any extra cose. |
| 154 | Supply and fixExahust fan with aluminium lovers 230V single phase size300 mm connecing up including provision of necessary wall opening and making good with cement plaster ,and cable from ceiling rose or connector to exhaust fan etccomplete all as specified and directed.Note : Old unsv fans will be deposited to AGE E/M store yard. |
| 155 | Supply and fixMCB DB, TPN with suitablerated busbar double door, 4 way 415volt 50 HZ AC Supply complete all as specified and directed. |
| 156 | Supply and fixMCCB Triple pole neutral 25 to 100 Amp with breaking capacity 16 KA,415volt 50 HZ AC supply complete all as specified and directed. |
| 157 | Taking down old unsv ceiling fan by disconnecting and providing new ceiling fan 1200mm sweep complete with blades,downrod,electronic regulator and accessories,230 bolt min air dilevery 210CFM with service valuse 6.00 BEE. five star rated with brushless direct current motor (BLDC), hanging on the same location,reconnecting, testing and commesioning complete all as specified .Supply and fixMCCB Triple pole neutral 25 to 100 Amp with breaking capacity 16 KA,415volt 50 HZ AC supply complete all as specified and directed.Note : Old unsv fans will be deposited to AGE E/M store yard. |
